I have a relatives PC around my house with a funny problem that maybe you can give me your thoughts on what might cause this issue. First when its at his house sometimes when he turns it on it will sit practically at pre post test and do nothing. System is Asus M2N SLI Deluxe board, Nvidia 8600GT Video, 2Gb DDR2-800 ram, Card reader, floppy drive, 640Gb HDD,AMD x2 4200+, Antec 900 case and Thermaltake 620 watt PSU i think.
But when i bring it over to my place and fire it up it always works perfect? Any thoughts on why it always works at my house but randomly after using it for maybe months it always seem to do the same thing and look like basically its freezing before it really starts post test. Side note after sitting for a couple of days it looses its bios setting and yet its only 11 to almost 12 months old for the PC.
My computer has been working fine for about a year and a half, then suddenly, this morning my computer starts freezing in a number of different scenarios. here we go... watching movies,,using the internet explorer?,loading savegames for pretty much any game my animated screen saver,,loading windows media player (sometimes it can manage it),any activity that seems to require even a little bit of graphics grunt. What happens in all situations is that the picture freezes and appears to go from 32 bit colour to like 256 colours, if there is sounds that freezes a few seconds later, and then stutters. Occassionaly the screen turns off or there is a blue screen with the windows error message, however it only stays for a few seconds and has considerable image noise.
this is what i have tested/tried so far virus/spyware >>>> fine graphics card fan >>>>> fine system restore >>>>> did nothing updated graphics drivers >>>> did nothing
I think that my graphics card has died, but I don't think this explains why internet explorer causes freezes or why the sound freezes.
I recently replaced a bunch of things in my computer - basically everything other than the drives and sound card. Reactivation was a pain but seemed to go smoothly. I updated all the drivers in ths OS (Vista Ultimate, 32 bit) and let it "burn in" for a couple of days by running Prime95 and keeping an eye on temperatures, stability, etc. Everything worked fine - no apparent problems with hardware or drivers and things would chug along quite nicely.
I notice that SP2 is lurking in Windows updates, so figure what the heck - improve performance and stability a bit. So I went ahead and installed it. Unfortunately, to my dismay, there was a background installation of an updated version of Avira Antivirus that I had forgotten about. Something blew up and I had to hard reboot. SP2 had not been completely installed it (did not go through the part with the reboots). In any event, I tried it again and this time it did finish - no installation problems at all with SP2. Also completed the Avira installation, which also went fine...................
I've been trying to download a free CPU temps monitor this afternoon without success and now I seem to have been left with something unwanted on my desk top.
When I'm just looking at the wallpaper and bottom bar ie I've just booted up, I've got the words Test Mode written in all 4 corners of the screen plus Microsoft(R)Windows(R)(Build 6001;Service Pack 1) written at the top middle.
This must have been left over from one of the temp monitors I tried and then uninstalled.
First I tried Real Temp 2.70 and that installed but then I realised I had to pay for it so I uninstalled with Revo Uninstaller. I then tried Speed Fan and Motherboard Monitor but these didn't like Kaspersky and looked like more trouble than they were worth so I uninstalled them as well.
Now I'm stuck with these words on my screen. They are quite small but still intrusive.
I've looked around on here some and most of what I find is someone eventually getting it to work properly after the instructions on this page:
PeerGuardian 2 RC1 Test
But those are also mostly from 2007, I didn't see anything helpful in 09 on this... Anyway though I installed PG2's RC1 and did what they said where you disable Integrity checks, restarted, and then tried to run it. But even after uninstalling and repeating this process and trying the XP64 version to no avail, I still get a message when I try to run RC1. It says:
Driver Error
PeerGuardian is unable to load the packet filtering driver. This could happen if PeerGuardian crashed and didn't have a chance to unload the driver, or if the pgfilter.sys can't be found.
I am runing windows vista 32 and it is actualy running ok for me thought I just tryed to run a memory test and found that it runs up to about half or what i have then it starts over. It will do this till i get tired of watching and jump back in to my bios and tell it to run the fast test witch dose not run any real test. Then the comp will boot fine and run ok. I would really like to know how to get it to run a real mem test so i can check my systems memory. I had a problem a wile back where my main board desided to over clock my memory on its own and thought it is now runing ok i want to make sure it did not damaged the memory. I already found that it had damaged my FX card and had to replace it.
Just found this site that will let you test the version of your browser add-ons, to make sure they are up to date. Why not give it a try to make sure that you are current. A must do for security.
I have ran the Microsoft conectivity test many times on my new Netgear DG834G V4(firmware v5.01.09) and it fails on the TCP high performance test(see screenshot attached) I like my Vista tweaks and always had it set to highlyrestricted with my old Tiscali standard Siemens SE587 receiving speeds of over 7Mb on a 8Mb connection almost everyday. Some of my DSLzone forum buddies have said that theirs passes the test but why does mine fail. I have asked Netgear support and they cannot tell me whether this router supports this feature or not....what a joke!
here is the link to the connectivity test for all routers but you must use Internet Explorer; {url}
Please try and solve this mystery for me. I have just recovered my system recently and it still fails the test so its not my computers set-up.
I will try and attach it seperately this time.
(Click on the X in the bottom right corner after clicking on the image to expand)
Have HP Presario 500, 32bit (nVidea nforce 10/100 ethenet) that was working fine until suddenly no network was recognized- no wireless. When I try to create a connection I get "This computer does not have a wireless network adapter installed and configured", however under device manager It tells me that my card is working fine. It also tells me that my "6to4" adapter (whatever that is?) "Windows cannot load drivers required for this device. (Code 31)" So.... HP and I spent an hour on the phone to no avail. They said it was a known issue and although the laptop is out of warranty, they would repair it, so I sent the unit into HP. Three days later they tell me that it's going to cost $750 to repair my $400 laptop because my laptop has been "dropped".
When I received the unit back from HP (No, I didn't authorize the repairs) lo and behold the wireless light was blue , it recognized my network and all my neighbors as usual, and the wireless worked.... for 10 minutes. The next time I turned the unit on the wireless light was orange, and no network. The internet works fine when connected with a cable to the router. Other laptops can see my network and can connect so I know that it's not the router (Linksys WRG54GS)
Can I test to see if the switch is faulty? Can I test to see if the internet card is faulty? Can the 6to4 adapter drivers be at fault?
I've been running the PC since new with an adaptor for the monitor cable where this inputs to the PC. The technical side of it is beyond my knowledge but I was advised when I bought the PC that I had to use with adaptor with the secondhand monitor I have. Last year however the PC ceased to output to the monitor and by trial and error I realised that it would now only work without the adaptor.
More recently I began to experience booting problems -the PC sounds as if it is whirring into action as usual but then gets 'stuck' and there is no output whatsoever by way of error messages or anything else. The problem has been intermittent -sometimes it will boot normally other times not at all. I have run just about every HP diagnostic I could find and also the 'start up repair' (latter didn't appear to recognize a problem). The only test which failed was the PCI express status test (code MB152-15W.
Then lo and behold there was no output to my monitor a few nights ago so I used the adaptor I had dispensed with using last year and all was fine again; my suspicious mind lead me to run the PCI test again which now passed. Then tonight, again no output to the monitor -removed aforesaid adaptor again and all was well, ran the PCI test again and it failed. 2 Vista updates were automatically installed when I shut down last night but the content of them does not appear as if it would have any relevance to my problems
I downloaded Vista SP1 and then tried to download Defender but my computer wouldn't pass the validation test. It had until then! I uninstalled SP1 and then tried but it still wouldn't allow me to download. My copy of Vista premium is legal and was on my computer when purchased it in August 2007.
PXE e61 media test failure, check cable boot failure press any key to continue
if i boot from my vista disc to repair. it cannot find an operating system but it gives me the option to load drivers, which doesnt help because i dont know which drivers to load, tried changing boot order around to enable just hard drive, but then i get bootmgr is missing also when i turn on my computer it sits on the screen that says intel, press del key to run setup. press f11 tp run boot meny, press tab jey to show post sreen. i tried all of those and the only one that works is the last one...if i keep pressing delete it will bring up the bios.
I'll be damned if Vista insists on biting me after every damn update! Does MS even test this crap or simply pass it by the testers desk? I get things calmed a bit then another update and I'm losing text and the cursor has an epileptic fit. This is a systemic situation starting last November to present as things were fine till they updated something. I've spoken with users from private community to DOD and they all report same.
Just underwent a zillion reboots and finally undid this weirdness - read on. I decided to format my second XP on partition D: and install Vista Ultimate SP2 obtained from Technet Plus where I'm a subscriber. I installed using "Windows Vista with Service Pack 2 (x86) - DVD (English)" ISO from Technet burned to a DVD and used the key I obtained there, not the "Windows Vista Ultimate with Service Pack 2 Checked Build (x86) - DVD (English)". Actually not quite sure what "checked build" is.
It installed OK but while booting I noticed right after the initial scroll bar when the screen is normally all black for several moments, registry entries (?) in white print flashing across the top of the screen, then it booted normally, but I had "Test Mode" in all 4 corners and "Windows Vista...blah blah" in the centre top of the screen. I thought maybe I need to activate which I did, I had entered the key during the initial install. It updated normally, some failed. I rebooted and could only boot either into that or XP. My main Vista on M: & Windows 7 on N: had vanished. Anyway I formatted D: again, removed a few Vista boot files, re-did the EasyBCD number (in XP on C: ) and finally got my old boot menu back.
I have a Windows "proficiency test" as part of a job interview. Looking at the interview schedule, it appears to last around 20 minutes or so. If I've been using either '98 or xp over the last twelve years or so, is there anything I can do to prepare? I have a feeling this is a very rudimentary test for someone who's used Windows for many years, but I like to be on the safe side. Any sample tests available you know of?
One day my laptop was open and someone came in and SLAMMED the cover closed, and that messed something up. It will not start up correctly, if my computer is off, and then turned on, this is what happens: It starts successfully to the screen where you have to enter the boot password, after you enter the boot password, the following message just keeps being displayed: Quote: For Realtek RTL8111B/8111C gigabit Ethernet Controller v2.06 (070425) PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE ROM. Operating System not found.
Intel UNDI, PXE-2.1 (build 082) Copyright (C) 1997-2000 Intel Corporation It just keeps showing that over and over. I have a "Microsoft Windows Vista Home Premium 32-Bit Operating System Disk" which says "Use this disk to re-install your operating system". If I use this disk will it completely wipe all my old files?
I have a Toshiba Satellite A100 Laptop. Yesterday suddenly my speakers stopped working. Since then I have tried everything to get the sound back but no success. Have also reinstalled the audio drivers.
stuff just hangs in my outbox---still receive mail OK. Here's the error message:
The connection to the server has failed. Subject 'test', Account: 'mail.comcast.net', Server: 'smtp.comcast.net', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
I bought a new graphic card but I needed a wire to install it to. But my power supply didn't have that so I used another power supply but that had 20 pins and my mobo 24 pins. So I bought a converter but it still didn't work. So I installed my old power supply again but now my pc starts without the beep and there is no contact with the monitor. Also these wires (see pic) got loose so I returned them to there places but maybe not in the correct order, is that the problem??? EDIT: ok so now I know its important to have the plugged correct, these are loose now
powe sw reset sw hdd led power led+ power led- speaker btw. I didn;t mean to unplugg them.
A friend has a laptop with Vista Home Basic SP1 and fully patched. Recently, she boots up the laptop. Brings her to the login screen. She enters her password and it continues. It shows the "welcome" screen with the circular thing and sits there. The hard disk occasionally works but eventually it's stuck at the welcome screen.
Same thing happens in safe mode but I get to the black screen with "Safe mode" and the Vista version on the screen. Get the cursor only. Press Ctrl-Alt-Del, click on Task Manager but nothing happens. Tried a system restore [using MDOP when I brought it to the office] as well as other tools in MDOP. Detects no bootup errors. Ran the system file repair utility [or whatever it's called] and no files were repaired.
After searching the 'net for months, I have yet to come up with a solution to my dilemma. Here's the deal. I have a Vista Ultimate 32-bit desktop, running an Intel 3.0 GHZ CPU and 1 GB of RAM. Everytime I leave my computer on for hours (typically overnight) it starts this odd, stuttering behavior, where EVERYTHING stops for a split second, every second. Music, mouse, video, EVERYTHING. The entire computer just skips. The only fix I have is turning the power off on the back of the computer, then unplugging and replugging the power cord in. I am positive this is not a great thing for my computer, and I need to find a solution before any real damage is done. This only happens after a long time, and is not after a specific time (i.e. after 3-4 hours EVERY time). I was thinking it could be the RAM, but I don't know.
Since I installed SP1 for Vista HP 64x I can no longer access my external hard drive/media player.
When I connect it via USB I get a message saying I need USB to IDE drivers. Windows then offers to search the internet etc but cannot find any. As a result Vista cannot see the drive and I am prevented from accessing nearly 300GB of my photos, music and movies.
This is a personal disaster. My best photographic work is on that drive.
I have had the drive for about a year and it worked perfectly before SP1. It's sold by a firm called Envizage but I believe they are just importers.
I contacted them and they replied that no drivers are required for Vista.
I was not even aware there was an IDE drive in there but I believe it is a 400GB Samsung. Can't check now obviously.
since I have had Windows Vista on my computer I can post a message somedays and not others. For some reason I have to press 'POST MESSAGE' several times before it will open the message session. I thought at 1st it may have been the forum itself but went in there today and used my laptoop with Windows XP and was able to leave a message staight away. Is there something I need to do to my computer to allow me into forums?
do not appear on the NG in Windows Live Mail on my computer. It was OK previously. I have unsubscribed the NG and then subscribed again. But still the same problem. But I see the msgs in the Sent Items folder. Tried sending thru:microsoft.public.windows.vista.mail
but still the same thing. I do not see the post in the NG, but it is there in the Sent Items folder. In both above cases, the posts can be seen in Google Groups from whereI have no choice but to post from. MY NGs may be corrupted.
just plugged in a usb exterior drive to do a new backup, then power light flashed a few times then PC rebooted but it freezes before the post beep.I have cleared the CMOS but no go are we talking motherboard do you think?
I've been having problems with my laptop for quite some time now. If I start it up normally, it always freezes after some time. It won't matter if I try to do something during that time or not. Also if I just open up a game straight up, it will work just fine, but when I exit it, I can't open anything new. It will just show that loading circle and nothing will happen. It works fine in safe mode. I have been searching everywhere for a fix, so now I'm trying my luck here. I'll try to give you some information here. I don't know what you will need though.
is there a way to default windows mail so that instead of starting to type at the top, it starts at the bottom of the message? You only need two tools: WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.
When i start up my laptop (vistaHPx86) ITs all good untill 'Svchost' starts.. then my computer forever loads something (I heard the sound),untill I shut down my computer.. this is so annoying any idea what windows is doing?
I have Vista Home Premium. My PC has recently started running a lot. Sometimes it runs for 1 min. and stops for 1 min. then starts again, does this over and over for a long period of time. Sometimes it runs constantly. Other times when it is in sleep mode it just runs constantly also.
I've been using my new Vista box (64-bit Home Premium) for a few months now and in general I'm OK with it. But something strange has just started to happen. If I click on my Firefox icon, the browser opens normally. For any URL I type in, (if the server is available, of course...), Firefox responds as quickly as the 'net allows. But when I try to start Firefox by clicking on a link in a different place, like a URL imbedded in an email or off a widget, there is about a 30 second delay before the browser comes up.
On my brand new Dell Precision laptop with Vista Business x64, I find that about 1 in 5 starts gets as far as the green progress/activity indicator bar then brings up a completely black screen but never progresses to the giant orb so that I can log in. Rebooting then brings up the suggestion to enter startup repair which I do and which has always (so far at least) solved the problem. The machine then boots normally.
