Not Run Memory Test On Boot
Apr 4, 2009
I am runing windows vista 32 and it is actualy running ok for me thought I just tryed to run a memory test and found that it runs up to about half or what i have then it starts over. It will do this till i get tired of watching and jump back in to my bios and tell it to run the fast test witch dose not run any real test. Then the comp will boot fine and run ok. I would really like to know how to get it to run a real mem test so i can check my systems memory. I had a problem a wile back where my main board desided to over clock my memory on its own and thought it is now runing ok i want to make sure it did not damaged the memory. I already found that it had damaged my FX card and had to replace it.
View 8 Replies
ADVERTISEMENT
Apr 21, 2009
I have a Win7 (Build 7000) installation and would like to use the VHD-Boot feature to boot into a Windows Vista (x64) installation. I have therefore prepared a Windows Vista VHD with my HyperV Server and generalised it. I used the following commands to add the VHD to my Boot menu:
bcdedit /copy {current} /d "Test"
bcdedit /set {ID from the copy} device vhd=[c:]vmfsvistadisk01.vhd
bcdedit /set {ID from the copy} osdevice vhd=[c:]vmfsvistadisk01.vhd
bcdedit /set {ID from the copy} detecthal on
After rebooting and selecting the new entry I just get a error message (after the attempt to repair something) from Windows 7 (!). I have also tried to create a vista vhd using the win7 waik und imagex - same result. how I can get this running?
View 5 Replies
View Related
Mar 23, 2008
have an asus a7n8x-x mb with amd athlon 2500 cpu. was running with 3x512 mem tried to upgrade to 3x 1gig. running vista home basic it will not boot with anything over 2 gig total. anyone with any ideas (other than a new system)?
View 7 Replies
View Related
Jun 16, 2008
I have a system runnung Vista, XP and Ubuntu. Now I replaced the memory from 2 Gb before to 4 GB DDR2 now. After this Vista is not starting successfully anymore. During boot process it restarts the computer. Booting in safemode the last loaded driver shown is crcdisk.sys before the system restarts. Windows XP and Ubuntu are running without any problem, HDD check shows no error, even Windows Memory Diagnostics is runnung without reporting any problem. If I change the RAM back to my old 2 GB also Vista is starting again. But with 4 GB it will not.
View 8 Replies
View Related
Apr 5, 2009
i installed vista 64 ultimate with 3 gig of ram but i was told that vista 64 could run with 4 so when i installed the 4th gig or ram my pc would turn on but not boot (did not see any display) so a friend told me that it is a known issue and to fix it i needed to reinstall service pack 1 with just 2 gig then that would allow me to install the full 4....i did this and now my comp will not boot unless i have just 2 gig, it wont even boot with 3 gig like before,
View 9 Replies
View Related
Mar 23, 2008
Am running Vista 64 Business on XFX 680i Sli LT with 2Gb ram, Quad core 6600, 600GT video. System runs fine, but I want more memory to help performance. When I try to install additional 2Gb, I get a blue-screen every time I boot (some blue screens have an IRQL_NOT_LESS_THAN_OR_EQUAL, most have no error msg). Is there a way to determine if my installation of Vista already has this installed? I've already checked the Control Panel/Windows Update/Review Update History, it's not in there, I thought it may be in the core install on the DVD?
View 9 Replies
View Related
Sep 14, 2008
I've been trying to download a free CPU temps monitor this afternoon without success and now I seem to have been left with something unwanted on my desk top.
When I'm just looking at the wallpaper and bottom bar ie I've just booted up, I've got the words Test Mode written in all 4 corners of the screen plus Microsoft(R)Windows(R)(Build 6001;Service Pack 1) written at the top middle.
This must have been left over from one of the temp monitors I tried and then uninstalled.
First I tried Real Temp 2.70 and that installed but then I realised I had to pay for it so I uninstalled with Revo Uninstaller. I then tried Speed Fan and Motherboard Monitor but these didn't like Kaspersky and looked like more trouble than they were worth so I uninstalled them as well.
Now I'm stuck with these words on my screen. They are quite small but still intrusive.
View 7 Replies
View Related
Mar 3, 2009
I've looked around on here some and most of what I find is someone eventually getting it to work properly after the instructions on this page:
PeerGuardian 2 RC1 Test
But those are also mostly from 2007, I didn't see anything helpful in 09 on this... Anyway though I installed PG2's RC1 and did what they said where you disable Integrity checks, restarted, and then tried to run it. But even after uninstalling and repeating this process and trying the XP64 version to no avail, I still get a message when I try to run RC1. It says:
Driver Error
PeerGuardian is unable to load the packet filtering driver. This could happen if PeerGuardian crashed and didn't have a chance to unload the driver, or if the pgfilter.sys can't be found.
View 9 Replies
View Related
May 15, 2010
Just found this site that will let you test the version of your browser add-ons, to make sure they are up to date. Why not give it a try to make sure that you are current. A must do for security.
View 8 Replies
View Related
Jul 6, 2008
I have ran the Microsoft conectivity test many times on my new Netgear DG834G V4(firmware v5.01.09) and it fails on the TCP high performance test(see screenshot attached) I like my Vista tweaks and always had it set to highlyrestricted with my old Tiscali standard Siemens SE587 receiving speeds of over 7Mb on a 8Mb connection almost everyday.
Some of my DSLzone forum buddies have said that theirs passes the test but why does mine fail. I have asked Netgear support and they cannot tell me whether this router supports this feature or not....what a joke!
here is the link to the connectivity test for all routers but you must use Internet Explorer; {url}
Please try and solve this mystery for me. I have just recovered my system recently and it still fails the test so its not my computers set-up.
I will try and attach it seperately this time.
(Click on the X in the bottom right corner after clicking on the image to expand)
View 9 Replies
View Related
Aug 2, 2009
Have HP Presario 500, 32bit (nVidea nforce 10/100 ethenet) that was working fine until suddenly no network was recognized- no wireless. When I try to create a connection I get "This computer does not have a wireless network adapter installed and configured", however under device manager It tells me that my card is working fine. It also tells me that my "6to4" adapter (whatever that is?) "Windows cannot load drivers required for this device. (Code 31)" So.... HP and I spent an hour on the phone to no avail. They said it was a known issue and although the laptop is out of warranty, they would repair it, so I sent the unit into HP. Three days later they tell me that it's going to cost $750 to repair my $400 laptop because my laptop has been "dropped".
When I received the unit back from HP (No, I didn't authorize the repairs) lo and behold the wireless light was blue , it recognized my network and all my neighbors as usual, and the wireless worked.... for 10 minutes. The next time I turned the unit on the wireless light was orange, and no network. The internet works fine when connected with a cable to the router. Other laptops can see my network and can connect so I know that it's not the router (Linksys WRG54GS)
Can I test to see if the switch is faulty?
Can I test to see if the internet card is faulty?
Can the 6to4 adapter drivers be at fault?
View 9 Replies
View Related
Nov 21, 2008
I have a relatives PC around my house with a funny problem that maybe you can give me your thoughts on what might cause this issue. First when its at his house sometimes when he turns it on it will sit practically at pre post test and do nothing. System is Asus M2N SLI Deluxe board, Nvidia 8600GT Video, 2Gb DDR2-800 ram, Card reader, floppy drive, 640Gb HDD,AMD x2 4200+, Antec 900 case and Thermaltake 620 watt PSU i think.
But when i bring it over to my place and fire it up it always works perfect? Any thoughts on why it always works at my house but randomly after using it for maybe months it always seem to do the same thing and look like basically its freezing before it really starts post test. Side note after sitting for a couple of days it looses its bios setting and yet its only 11 to almost 12 months old for the PC.
View 9 Replies
View Related
May 15, 2010
I've been running the PC since new with an adaptor for the monitor cable where this inputs to the PC. The technical side of it is beyond my knowledge but I was advised when I bought the PC that I had to use with adaptor with the secondhand monitor I have. Last year however the PC ceased to output to the monitor and by trial and error I realised that it would now only work without the adaptor.
More recently I began to experience booting problems -the PC sounds as if it is whirring into action as usual but then gets 'stuck' and there is no output whatsoever by way of error messages or anything else. The problem has been intermittent -sometimes it will boot normally other times not at all. I have run just about every HP diagnostic I could find and also the 'start up repair' (latter didn't appear to recognize a problem). The only test which failed was the PCI express status test (code MB152-15W.
Then lo and behold there was no output to my monitor a few nights ago so I used the adaptor I had dispensed with using last year and all was fine again; my suspicious mind lead me to run the PCI test again which now passed. Then tonight, again no output to the monitor -removed aforesaid adaptor again and all was well, ran the PCI test again and it failed. 2 Vista updates were automatically installed when I shut down last night but the content of them does not appear as if it would have any relevance to my problems
View 6 Replies
View Related
Mar 25, 2008
I downloaded Vista SP1 and then tried to download Defender but my computer wouldn't pass the validation test. It had until then! I uninstalled SP1 and then tried but it still wouldn't allow me to download. My copy of Vista premium is legal and was on my computer when purchased it in August 2007.
View 4 Replies
View Related
May 8, 2008
PXE e61 media test failure, check cable
boot failure
press any key to continue
if i boot from my vista disc to repair. it cannot find an operating system but it gives me the option to load drivers, which doesnt help because i dont know which drivers to load, tried changing boot order around to enable just hard drive, but then i get bootmgr is missing also when i turn on my computer it sits on the screen that says intel, press del key to run setup. press f11 tp run boot meny, press tab jey to show post sreen. i tried all of those and the only one that works is the last one...if i keep pressing delete it will bring up the bios.
View 9 Replies
View Related
Jun 14, 2008
I'll be damned if Vista insists on biting me after every damn update! Does MS even test this crap or simply pass it by the testers desk? I get things calmed a bit then another update and I'm losing text and the cursor has an epileptic fit. This is a systemic situation starting last November to present as things were fine till they updated something. I've spoken with users from private community to DOD and they all report same.
View 9 Replies
View Related
May 17, 2009
Just underwent a zillion reboots and finally undid this weirdness - read on. I decided to format my second XP on partition D: and install Vista Ultimate SP2 obtained from Technet Plus where I'm a subscriber. I installed using "Windows Vista with Service Pack 2 (x86) - DVD (English)" ISO from Technet burned to a DVD and used the key I obtained there, not the "Windows Vista Ultimate with Service Pack 2 Checked Build (x86) - DVD (English)". Actually not quite sure what "checked build" is.
It installed OK but while booting I noticed right after the initial scroll bar when the screen is normally all black for several moments, registry entries (?) in white print flashing across the top of the screen, then it booted normally, but I had "Test Mode" in all 4 corners and "Windows Vista...blah blah" in the centre top of the screen. I thought maybe I need to activate which I did, I had entered the key during the initial install. It updated normally, some failed. I rebooted and could only boot either into that or XP. My main Vista on M: & Windows 7 on N: had vanished. Anyway I formatted D: again, removed a few Vista boot files, re-did the EasyBCD number (in XP on C: ) and finally got my old boot menu back.
View 9 Replies
View Related
Apr 2, 2008
I have a Windows "proficiency test" as part of a job interview. Looking at the interview schedule, it appears to last around 20 minutes or so. If I've been using either '98 or xp over the last twelve years or so, is there anything I can do to prepare? I have a feeling this is a very rudimentary test for someone who's used Windows for many years, but I like to be on the safe side. Any sample tests available you know of?
View 4 Replies
View Related
Feb 23, 2007
Memory DiagnosticsIf Vista detects a memory problem in your system such as a faulty RAM module, it will display a notification asking if you want Vista to try to diagnose the problem.Then again you may also recieve the sudden BSOD with the error MEMORY MANAGMENT at the top. You can manually run this tool anytime just typememory in the search box inside the start menu.This tool offers you two options: restarting immediately and checking for problems, or running next time you reboot your machine (the memory diagnostic tool must run at boot time).
Network DiagnosticsWindows Vista also allows you to check the connectivity of your network connection using the Network Diagnostics Framework: An infrastructure and a set of built-in and extensible components that attempts to automatically diagnose and correct network connectivity problems. The usual way to run this check is to open Network Center and click the Diagnose Internet Connection link on the left Vista will either identify ............
View 4 Replies
View Related
Sep 22, 2009
One day my laptop was open and someone came in and SLAMMED the cover closed, and that messed something up. It will not start up correctly, if my computer is off, and then turned on, this is what happens: It starts successfully to the screen where you have to enter the boot password, after you enter the boot password, the following message just keeps being displayed: Quote: For Realtek RTL8111B/8111C gigabit Ethernet Controller v2.06 (070425) PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE ROM. Operating System not found.
Intel UNDI, PXE-2.1 (build 082) Copyright (C) 1997-2000 Intel Corporation It just keeps showing that over and over. I have a "Microsoft Windows Vista Home Premium 32-Bit Operating System Disk" which says "Use this disk to re-install your operating system". If I use this disk will it completely wipe all my old files?
View 7 Replies
View Related
Jul 29, 2009
I have a Toshiba Satellite A100 Laptop. Yesterday suddenly my speakers stopped working. Since then I have tried everything to get the sound back but no success.
Have also reinstalled the audio drivers.
View 6 Replies
View Related
Nov 29, 2009
I had 4GB physical memoryon the PC. With Windows vista 32 bit, available memory is shown as 3.3GB. I asked and was told that only under 64 bit windows, will the available memory be 4GB. When I upgraded to windows 7, I chosed 64 bit, but the available memory shown in the system is still 3.3 GB. Why is this and is there a way to make the full 4GB available? It's possible that my video card is using RAM instead of its own RAM. If I install a video card with its own RAM, will the full 4GB be available?
View 9 Replies
View Related
Jul 3, 2008
I have a problem with Vista Ultimate x64 SP1, I always seem to lose all my free RAM within an hour regardless of system activity, even while idling. I have noticed an svchost.eve process runs each time I reboot which seems to bloat constantly although when I close it down it only frees up about 800MB, what's happening to the rest of my 8GB??? When I launch Task Manager it says I'm only using 10% Memory but free RAM sits at 0?!?!
View 9 Replies
View Related
May 16, 2010
I had 4GB physical memoryon the PC. With Windows vista 32 bit, available memory is shown as 3.3GB. I asked on usenet and was told that only under 64 bit windows, will the available memory be 4GB. When I upgraded to windows 7, I chosed 64 bit (I did clean install of course), but the available memory shown in the system is still 3.3 GB. This is show in both task manager under performance->Physical memory->total, and 'property of My Computer'->Installed memory (4GB/3.3 GB usable)........
View 7 Replies
View Related
Sep 15, 2009
stuff just hangs in my outbox---still receive mail OK. Here's the error message:
The connection to the server has failed. Subject 'test', Account:
'mail.comcast.net', Server: 'smtp.comcast.net', Protocol: SMTP, Port: 25,
Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
View 9 Replies
View Related
Aug 23, 2008
I am fairly new to the forums, and VERY new to Vista x64. The machine is new, and I was trying out some apps and games, I was in Secondlife when I got an error messege saying I was out of memory and needed to free up memory. I shut down the app and restarted it. Runs but I watched Task manager and saw my free memory down to almost nothing after an hour or so. The cached seems very high.
I did alittle research and decided to set a second page file on my 1TB hard drive, (OS is on the other HHD's )( regulated by system for size ) I'm not really sure whats going on. Example of just task manager and this page openis attached. Again, any help would be great in getting the memory set up on here optimal.
View 9 Replies
View Related
Oct 17, 2009
I have 6gigs of DDR3 memory at 1600hz. Running on Vista 64bit and every now and again my memory performance just maxes out. The problem can occur around the time when I am installing something but I dont think its always this way. I have read forums where it could be the hardrives performing self diagnostics. I have all the latest patches for vista.
View 7 Replies
View Related
Jan 1, 2009
I went to turn it on this morning, I just had a black screen showing the following words;
Press F2 to run
Press F11 to boot menu
Auto detecting PRI Master Atapai CDROM.
It then went to reboot and select proper boot device or insert boot media in selected boot device and press a key. I went into the BIOS to change the boot order and inserted my Vista home premium 32bit. I then got windows is loading in files. After a short while I got the black start up screen with Microsoft Corporation but after a few seconds it just froze. Moments later it went to a blue screen with white writing part of which said the following; A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO PREVENT DAMAGE TI YOUR COMPUTER.
View 9 Replies
View Related
Mar 26, 2009
I'm running Vista 64 Home (SP1) Premium on a homebuilt machine w/8GB (4 X 2GB modules). Windows is reporting 8 GB of Installed Physical Memory but is reporting only 4 GB of Total Physical Memory. I first noticed this when, after installing a game, the game system specs said 3092 MB of RAM.
I have checked the BIOS and it recognizes 8 GB. Memory Remapping is Enabled. Under Memory Remapping is "PCI MMIO Allocation: 4GB to 3328 MB" (?). MSConfig Boot Options shows Max Memory is not checked and no value in the box below. I tried enabling it and using 8192 as the value, but it made no difference. DxDiag shows 8 GB installed RAM. how I can get windows to make available all 8 GB of RAM? (Motherboard is ASUS Maximus II Extreme w/Intel Q9550 processor running at Q9650 clock speed, memory running at 1127 MHz
View 9 Replies
View Related
Dec 16, 2007
Is there any way to turn off "Test Mode" in Vista x64 Ultimate? Once upon a time I disabled driver signing through bcdedit /set nointegritychecks ON or bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS (don't remember anymore). Now I would like to enable it back on, but can't. bcdedit -deletevalue loadoption or bcdedit /set nointegritychecks OFF/NO didn't work. Also atempt to remove only the "test mode" watermark by overwriting user32dll.mui also didn't work. I managed to overwrite the file with changed files in bots system32 and syswow64, but nothing changed.
View 9 Replies
View Related
May 26, 2008
Just recently purchased a Lexmark X3550 (which is Vista Certified [for what it's worth]) ... At any rate, after installing the software (trying everything except installing it using compatibility mode) I can only print a test page by right clicking on the printer choosing "Run as administrator" and clicking properties. From here I can print a test page without any problems.
However, if I simply right click the printer and select properties I cannot print a test page. And I can't print anything else either. Any attempts result in a "Cannot Communicate with Printer" message that tells me the USB cable isn't connected or the printer is turned off (which it obviously isn't).
Furthermore, the computer in question only has one account configured on it and it's configured as an administrator. All of the settings under the security tab (under properties) are set to allow. Also, I was able to get the printer installed on my system so I know it's not the printer or cable ....But some crazy Vista setting that is differnt on the two machines.
View 4 Replies
View Related
