NTFS Index Corrupt?
Jan 7, 2009
when I powered up my Vista I noticed that it was unusually slow and all of a sudden, it froze for no apparent reason. I rebooted [by pressing reset on case as keyboard wouldn't respond] and booted into XP and ran chkdsk on the Vista partition. Sure enough, it found two errors but in the index area. Here's the output of DOS window:
Code: C:>chkdsk /r d:
The type of the file system is NTFS.
Volume label is NEW_C.
CHKDSK is verifying files (stage 1 of 5)...
File verification completed.
CHKDSK is verifying indexes (stage 2 of 5)...
Deleting index entry SBEServer.exe in index $I30 of file 1153.
Deleting index entry SonicMCEBurnEngineIcon.png in index $I30 of file 1153.
Index verification completed..................
View 7 Replies
ADVERTISEMENT
Feb 11, 2009
In my Event properties I getting a NTFS error that the file system structure is corrupt and unusable.
It tells me this is volume Device Hard disk Volume3
Question is, Which hard drive is that?
In disk manager I have the following
Disk 0 F: drive
Disk 1 D: drive
Disk 2 C: drive
Disk 3 H&P: drive
Disk 4 G: drive
Disk 5 M: drive
I guess that's kinda messed up..huh!
plus other removable cf card / sd card / mmc card drives
I need to Chkdsk the volume3.
View 7 Replies
View Related
Apr 19, 2008
My memory exp index was 5.9 previously. For some reason, i reinstalled my Vista includeing all necessary drivers (EXACTLY the same as before). But... so weird... the memory index drops to 5.3, WTH? I don't wanna have a severe performance degradation.
View 7 Replies
View Related
Jan 1, 2009
Im new to vista and have looked over this forum but cant seem to find an answer to my issue...which is: I open "Computer" then press on "Searches" (on the left) and then open "Everywhere" which returns 5,000 results...PLEASE how do i clear this list. I have rebuilt the index after removing ALL folders etc to index...now displays ZERO indexed items.
I have then turned indexing off completely on all drives (right click/properties/untick indexing option and select ALL files and subfolders)...and via admin tools/services/windows search (disabled after stopping service) I have rebooted and still thousands of results come up under: Searches/Everywhere Its driving me nuts
View 8 Replies
View Related
Sep 1, 2009
I am trying to restore my computer and it says my ntfs is missing.
View 4 Replies
View Related
Aug 7, 2009
I just bought a external hard drive
But, after transfering all my data I found out it is FAT32?
Is there a way I can change this to NTFS?
Without losing the data?
it is drive G
View 9 Replies
View Related
Apr 28, 2008
i'm going to format an external HDD: in the mask that appears in Vista i need to choose the amount i want for the size of the allocation file. what does this mean? How this will influence later my HDD storage capability?
View 5 Replies
View Related
Apr 12, 2008
I have an internal IDE HDD that I have put in an USB external enclosure and connected to my Dell Vista laptop. When I attempt to format the drive in Computer Management, I assign it a letter and format with NTFS. However, the result is a Healthy Partition in RAW format. When I try to attempt to reformat using quick format, sometimes it will format it again as RAW, or it will give me an error message stating that Windows cannot format the drive. Again, the HDD shows up as a Simple, Basic, Healthy(Primary Partition) with a RAW File System. I cannot access the drive and put files on it.
View 5 Replies
View Related
Mar 23, 2008
I want to buy Windows Vista NTFS and I cant find it. I have a small business and I need this program for my Apple Computer. But I cant find on any website what versions of Windows vista has NTFS.
View 8 Replies
View Related
Mar 23, 2008
on my Vista Ultimate I have just create another user account, (for a friend of my) how is only members of USERS on my HDD E: the security rights are those:
Authenticated users = ~Full control
SYSTEM = ful control
Administrators = full control
Users = Read & execute, List folder contents, Read,
but with this new account I can still remove thing on E: (the security settings of the delete test file are the same as the root Disk)
View 4 Replies
View Related
Feb 6, 2009
I just ran the vista advisor from Microsoft and it said my 160 GB FAT 32 Hard drive was acceptable. I was under the impression that Vista required NTFS. I don't like the convert command because it loses some performance and has other issues. I can format and partition another 160 GB Hard Drive to NTFS and then use Acronis to copy partions (it will copy the files from an image without copying the FAT 32 format). The only problem is that it will take more than four hours. Does anyone know of a quicker method?
View 4 Replies
View Related
May 8, 2008
Can vista 32 pro install on an ntfs partition formated with 16k clusters. If so how can I format the drive to 16k clusters using the vista boot cd, are there any steps or commands I need to do during the boot sequence? And are there any "stable" third party programs or suggestions so I don't have to dump the current os that is on the drive? As I believe that the image file restores the cluster size.
View 9 Replies
View Related
Apr 17, 2009
i have linux ubuntu 8.10 and im changing to vista when i boot from dvd and get to choose partition part i click format drive and it sais error 0x8004005. partition needs to be NTFS. how do i make this partition NTFS and format it so i can have vista?
View 6 Replies
View Related
Mar 24, 2008
I am used to dual booting xp O/S and typically I keep one partition NTFS (everyday usage) and the other FAT32 (software testing). This is so when I boot into my FAT32, my NTFS is hidden and the primary drive is C:
I bought a new desktop with Vista intalled on it, I have successfully partitioned and dual booted with XP. Vista is NTFS and XP is FAT32, when I boot into the FAT32 XP, the primary comes up as H: and the C: is still the Vista partition which
easily browsable? Why can XP read Vista NTFS partition?
View 6 Replies
View Related
May 8, 2008
Can vista 32 pro install on an ntfs partition formated with 16k clusters. If so how can I format the drive to 16k clusters using the vista boot cd, are there any steps or commands I need to do during the boot sequence? And are there any "stable" third party programs or suggestions so I don't have to dump the current os that is on the drive? As I believe that the image file restores the cluster size.
View 6 Replies
View Related
Apr 26, 2009
Is is often recommended (if defragmenting tool allows it - as JKDefrag and incoming MyDefrag ) to keep MFT and folders close together for short access time. $Logfile ( NTFS transaction circular log ) seems not to be movable by Vista defragmentation API. Does make sense to keep together all of them by placing MFT / folders toward $Logfile?
View 4 Replies
View Related
Sep 16, 2009
I have an eSATA drive formatted NTFS from my XP installation. Drive works fine from either XP or Linux (multi-boot machine) I had previously tried Vista on the machine but it saw the eSATA drive as unformatted. Gave the message "Do you want to format this drive?"
Very dangerous as an unknowing person may have actually formatted the drive and lost all their data. Interestingly enough, any time I've tried to access the drive, Vista ran a chkdsk on it at the next boot up. CHKDSK from Vista saw it fine and reported no errors. but could not read the drive once booted to the desktop. I eventually gave up on Vista and just did a Win7 install yesterday.
View 9 Replies
View Related
Mar 27, 2009
It's a new drive with nothing on it. I started converting it from an Amin command prompt about 5 hours ago. The LED on the drive is flashing and the Task Manager shows it's running but other than that I have no indication that it is in fact actually running. Below is what the command prompt window displays. It has not changed at all in the 5 hours. Has anyone else experienced this? How long does this process usually take?
Windows is verifying files and folders...
File and folder verification is complete.
Windows has checked the file system and found no problems.
624,976,672 KB total disk space.
160 KB in 5 hidden files.
32 KB in 1 folders.
32 KB in 1 files.
624,976,416 KB are available.
32,768 bytes in each allocation unit.
19,530,521 total allocation units on disk.
19,530,513 allocation units available on disk.
Determining disk space required for file system conversion...
Total disk space: 625129272 KB
Free space on volume: 624976416 KB
Space required for conversion: 843485 KB
Converting file system
View 9 Replies
View Related
Aug 11, 2008
Recently, after varying times of general computer usage (internet, e-mail) ranging from 5 minutes to an hour, I'll get a BSOD, with the above title. I'll attach the dump files, and include the code from it below. I've tried some troubleshooting of my own. I've run memtest86+ on each of my 4 1-gig RAM modules, all clean. I've run Prime95, clean. I've installed new video drivers. I've run a diskcheck, and used Western Digital's diagnostic utility, clean. The culprit always is ntfs.sys. Should I try to repair my windows, or replace the ntfs.sys with a new one?. Also, I don't have any readboost of USB storage devices plugged in.
Code: PAGE_FAULT_IN_NONPAGED_AREA (50) Invalid system memory was referenced. This cannot be protected by try-except, it must be protected by a Probe. Typically the address is just plain bad or it is pointing at freed memory. Arguments:
Arg1: fffffa610b3a9ff8, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffffa6001219130, If non-zero, the instruction address which referenced the bad memory address.
Arg4: 0000000000000005, (reserved) ............
View 5 Replies
View Related
Mar 25, 2010
I know about FAT32, but I know little about NTFS. Assuming both hard drives are not "fragmented". If a large (200MB) file is deleted, is it more likely to be overwritten (space it occupied on the hard disk is overwritten) on a FAT32 hard disk compared to a NTFS? Remove "ine" from my email address
View 4 Replies
View Related
May 2, 2010
I am runnig out of space in the C drive, but have plenty of space in D drive. How do I allocate more space from the D drive to the C drive? As you can see I have no memory in C:. What can I do to increase it? Do not want to purchase additional programs, not enough space to install them.
View 7 Replies
View Related
May 23, 2009
What happens when you attempt to install Windows 7 on a drive with NTFS version 1.2 (or some earlier version... like 1.3, etc)? Does it alter the file system? Any way to force Win7 to use the older file system? I'm hoping for performance improvements due to less features in older NTFS, but I know little on the topic.
View 6 Replies
View Related
Feb 6, 2010
I have just spent all day, literally, formatting and partitioning my 500gb SeaGate Free Agent. As of now, it is 32gb FAT32, and the rest is NTFS. My question is, can I use the Extend/Shrink Volume tools to decrease the maximum capacity of the NTFS format and therefore increase the maximum capacity of the FAT32 format, as I need more than 32gb. If not, how can I achieve this on Vista?
View 4 Replies
View Related
Apr 9, 2009
This morning my computer started issuing security alerts notifying me that the firewall was off as was the malware. I turn the firewall on but under the malware section it indicates that it is reporting to the security centre in a format that is no longer supported. It also has a little Not Compatible icon to the right of the malware icon on the left. Once the firewall is turned on and the malware turns from red to yellow when we turn it on the shield in the bottom right of the screen goes yellow for a while but eventually it goes red again and I am again notified that the firewall is off and the malware is off as well.
I know my subscription is still in effect and according to the system it expires 10/03/2010.
View 1 Replies
View Related
Nov 4, 2009
My gtx 275 on windows experience index shows as graphics 5.9 and gaming graphics 5.8 WTF ARGGH I just bought this card and before i had a 9800gt which score 5.9 in both whatt? iv refreshed the score twice and i think u guys know which card is better a 9800gt or a gtx 275? Iv got the new beta 195.39 nvidia drivers!
View 9 Replies
View Related
Feb 28, 2009
I constantly am finding that i have to go in to control panel> Indexing options to re-submit the locations that i want Vista to index for searches. Why does it keep clearing itself and anyone know of a solution?
View 9 Replies
View Related
Mar 23, 2008
my vista Home Premium has yet again got the index/search not working. Start/Control panel/ Index Options, gives me a dialogue box that says the index is not running and all the other functions are greyed out. I have had this before and found that I had to reinstall Vista (a fix was expected early 08) I believe it is being caused by my external hard drive being removed and the drive no longer is available to the Index?.
I have tried the "0 in SetupCompletedSuccessfully" fix, and copying the
gathrprm.txt and schema.txt files to the configure Folder.I have a Sony VGN-FZ11z fully updated with Vista Home Premium. I really dont want to reinstall again.
View 9 Replies
View Related
May 24, 2008
at the moment my base score is 4.8 on ram every thing else is 5.9 my question is that if i add 4gb of ram more as that is what my computer can take will it up my score to more than 4.8
View 8 Replies
View Related
Mar 7, 2008
This is a known bug according to several Internet sources. So how can I DISABLE indexing of network shares? I have a network share which has like 200 folder/sub-folders, and everytime I access it, it works for a second or two, then it hangs windows explorer, sometimes hanging my whole PC (explorer.exe)!!!
And I know it is doing this because the root folder only has like 20 sub-folders, all of which I can clearly see listed, but when I do a Wireshark capture (tcpdump), I see all the sub-folders and files being listed, so I know it must be spidering the share and indexing everything. The worst part is, this share is on a NetApp, so there are .hourly and .daily and .weekly and .monthly snapshots of all my data.. In all, it is several dozen gigabyes of files, folders, and sub-folders, all of which Vista is "attempting" to index, but cannot/store. how to turn off indexing? Heck, I'd be happy with NO (not even local) indexing just to avoid this damned problem again and again. No known ETA on a fix from MSFT, from what I can find.. Which is a shame!
View 8 Replies
View Related
Nov 22, 2008
I've been surfing the web for ages and tried many fixes I've been reading, including this one, to address my specific problem. Yours is a GREAT tutorial, by the way. But it does not work for me. My problem is that the Vista search box won't find ANY file under my Documents folder. I have selected "index this folder" under the properties of the folder but it won't work. If I go to control panel the only folder that is included is "Users", but does this mean "c:users" or not? I have no clue! if I try to manually add a folder from this control panel / indexing window I can not navigate to "c:usersmy_user_namedocuments" folder because it does not show up as you can see on this screen capture! what the hell is going on? I am already thinking of reinstalling the whole system but I'd like to know how I went into this situation or else I risk doing the same again.
View 4 Replies
View Related
Mar 29, 2008
I ran the sfc function the article mentions but it came back saying everything was ok. Index still not working though....
View 4 Replies
View Related
