Multiple Monitors Resolution: Doesn't Fill Entire Screen
Mar 23, 2008
I have a Samsung LCD 720P HDTV 32" that I have been using as a secondary monitor. I just bought a new computer (HP Elite M9060N) with vista on it and a Geforce 8500GTS NVIDIA card (factory installed). When I try to extend my desktop onto my tv (using Dualview) it doesn't fill the entire screen. It leaves a black ring around the outside. I've tried adjusting the resolution, but it doesn't work. In addition to the ring, the resolution on the tv looks horrible. I have the refresh rate maxed out and tried flip flopping which monitor is my primary but just can't seem to get it to work. I'm also using a Samsung LCD 20" monitor and connecting my extra monitor with an HDMI cable.........
View 5 Replies
ADVERTISEMENT
Mar 26, 2008
I have a Samsung LCD 720P HDTV 32" that I have been using as a secondary monitor. I just bought a new computer (HP Elite M9060N) with vista on it and a Geforce 8500GTS NVIDIA card (factory installed). When I try to extend my desktop onto my tv (using Dualview) it doesn't fill the entire screen. It leaves a black ring around the outside. I've tried adjusting the resolution, but it doesn't work. In addition to the ring, the resolution on the tv looks horrible. I have the refresh rate maxed out and tried flip flopping which monitor is my primary but just can't seem to get it to work. I'm also using a Samsung LCD 20" monitor and connecting my extra monitor with an HDMI cable.
View 5 Replies
View Related
Apr 23, 2008
I have a Vista Ultimate laptop connected to two monitors. I can extend my desktop to the second monitor just fine. But when I come back from a meeting, and my screen saver has been on, my desktop is no longer extended. Both monitors show the display for monitor 1.
The setting is still correct under Display settings and I can fix the issue by changing Monitor 2 to be the main monitor and then switching it back to Monitor 1 being the main monitor.
View 7 Replies
View Related
Mar 27, 2008
My graphic card is NVIDA GeForce 7600 GT WDDM. One old LCD monitor which is non PnP and one new 24" acer LCD monitor which is a PnP monitor. Both monitors displayed the boot up information from the BIOS when booting up. The old monitor screen became blank when the Windows "welcome" message appeared. The Windows system recoginsed two monitors presented one PnP and one non PnP but can't recongised it under the display setup monitor. It only display 1 multi monitor on NVIDA GeForce 7600 GT and 2 general non PnP monitor on NVIDA GeForce 7600 GT. I can edit the resolution in 1 but not 2. I tried to swap the cable slots between the monitors and the new one always became the main monitor.
View 4 Replies
View Related
Sep 18, 2009
Windows Seven OS. From Home basic to Ultimate have their Multi Monitors features right? Is there any future update of that Multiple monitors features for Windows Vista Users?
View 6 Replies
View Related
Mar 23, 2008
I have recently purchased a new quad-core, Vista PC with dual NVidia cards. I am trying to set up multiple monitors, but the second monitor does not seem to be recognized - although the display under control panel sees two monitors. When I connect everything and reboot, the second monitor stays in power save mode. I am guessing that the PC is not really "seeing" the second monitor and the two in the display is a mirror, but am unsure on how to verify this. Is there a way to force it to detect the new hardware? Windows Vista helps and support says it should auto-detect, but if it does not, I cannot find a work around to force it to see this new monitor.
View 4 Replies
View Related
Mar 18, 2007
I am a multi-monitor Windows Vista user ever since I got hooked on multiple monitor at work. Two monitors make doing multiple tasks at one so much easier. If I am working on an article or trying to be creative in Photoshop, everything is just much easier because I always have multiple applications open at once. One feature that I wish I had as soon as I purchased my two monitors and hooked them up was the ability to stretch my wallpaper across both monitors. I wanted to use a very large and wide photo as my background that would like cool displayed across both monitors. Something like the Golden Gate bridge in San Francisco or a cityscape. After installing and uninstalling Ultra Mon, a third-party shareware utility that I heard is great for multi-monitors, I wanted a easier solution and not something that I had to run in the background. A few weeks go by until I accidentally stumble across how to natively stretch your wallpaper across multiple monitors. Follow these steps in to display a large image across multiple monitors: ...
View 0 Replies
View Related
Mar 21, 2010
I have a Dell laptop that when you open a program will no fill the screen. On the right side of the screen it shows the desktop. Even if you right click in the area nothing happens. It almost like some thing is hidden and will not let anything display in the area.
View 4 Replies
View Related
May 11, 2008
I just got a new LCD monitor to replace my old CRT monitor. the problem is the LCD doesn't support the resolution i used to have on the CRT which was 1280x1024. the maximum resolution on the LCD is 1280x768. well i have XP and vista dual booted and when i put up the new monitor i did everything in XP and totally forgot about doing the same thing for vista. so now my problem is when i try to log into vista i get a "Frequency out of range" because the vista resolution is 1280x1024 but now i have no idea how to fix it.
View 4 Replies
View Related
Apr 14, 2010
My Windows Vista Home Premium continuously freezes after a short period of not using it. It can vary from 30 minutes to an hour or two. I do not have screen savers and turning off monitors or hard disks on. I've checked a couple of the forum threads here(Windows freezes in idle time).
View 8 Replies
View Related
Mar 26, 2008
I am trying to import multiple projects into the Windows Movie Maker. I see in the help where I can import multiple clips, but that doesn't seem to work with multiple projects. I have these projects (3 of them) made at different times, that I want to import into the Movie Maker so I can do the editing. If I edit one, then try to import the second it REPLACES the 1st. I have tried dragging and dropping on the timeline, but again it just replaces whats there.
Is there a way to have all three projects import into the timeline at the same time? Now I can import the first, then open the 2nd and 3rd projects and drag and drop on thetimeline, but thats allot more work this way, And when it's all done, there will pro bably be 2-3 more projects. If the Movie Maker is not capable of this, can you recommend a commercial (or other) program that will import multiple projects?
View 5 Replies
View Related
Aug 22, 2008
I was just wondering if anyone else had experienced these annoying freezes that occur randomly in Vista 64. It can happen while I'm playing a game, it can happen while I'm browsing firefox etc. I freeze up about 4 times a day and the only solution is a hard restart.
It is beyond me, I have the video card drivers up to snuff, all updates are installed, virus scanners/spyware scanners, video card isn't overheating, CPU idles at 33 loads at 42. I'll describe the problem a little better other than to just say it's freezing. When the freeze occurs, the entire screen stops moving, I cannot move my mouse, all sound stops working, and if there was a sound playing, it will get mutilated into a nasty buzz.
View 9 Replies
View Related
Mar 23, 2008
About once a week my screen resolution seems to be changing--I think on its own. I do have small kids that sometimes touch the keyboard, so that might have something to do with it, but I don't think so. I say its the resolution, but I am not even sure of that. When it happens the icons get bigger--and webpages font sizes become too big for a page. I have tried manually adjusting the screen resolution, but that doesn't seem to be the answer--it doesn't put it back the way it was before. To fix the problem, I have been restoring my system to previous dates---but it always seems to re-occur.
View 7 Replies
View Related
Oct 18, 2008
Although my card supports 2xxx x 1xxx resolutions and my monitor supports 1920x1200 optimal; I can only reach 1920x1080 at maximum resolution. All my drivers are up to date. What can I do to solve this problem? Can I do anything? What is wrong?
View 7 Replies
View Related
Sep 12, 2009
I'm having some problems with my screen colour and resolution atm. Tryed system restore, updating drivers and generaly looking on google for answers but most are unclear at best.
Imageshack - myscreen
Imageshack - devices
These are 2 SS. 1st is what my screen looks like. Although I must say it looks alot worse on my acctual screen. Second Is what I figure the problem is due to them simply not working. NVIDIA GeForce 8300 GS < Windows has stopped this device because it has reported problems. (Code 43)
View 5 Replies
View Related
Mar 26, 2008
I have an older Dell PC and have re-installed Windows XP on it three times. The OS seems to work fine each time but it gives me no way to adjust the resolution. I go into adjust screen resolution and it wont let me adjust anything, the slide bar, in advanced, and under settings. I can't change anything even trying to load the software for the monitor fails?
View 6 Replies
View Related
Jun 20, 2009
How can i force a bigger screen resolution? My current resolution is 1360x768 and i would like to make it larger heres my system specs, Hp slimline s3700y, Widows Vista Home premium SP1, Video card: NVIDIA geforce 6150 se, Monitor: Sony 32" LCD Bravia, usiing RGB input on my tv. I updated all my drivers and still no luck... I know its possible because on my other outdated computer i can get 1920x1080 with no problems and the resolution looks good and not blurry
View 8 Replies
View Related
Mar 23, 2008
I have just upgraded my PC to Vista from XP and purchased a new monitor, capable of supporting 1440 x 900 resolution. Problem is that the screen resolution cannot be changed and is fixed at 640 x 480. I've tried via the settings in the control panel but I cannot drag the mouse on the slider bar from low to high resolution.
The online help suggests I may have an inadequate video card, Does anyone know how I can check this? What card do I have now and what do I need? Or is there another solution?
View 5 Replies
View Related
Mar 23, 2008
I am having ongoing resolution problems when I install my video card drivers. BEFORE I install them, my screen resolution is 1280x1024 which is what it should be. AFTER I install the nVidia drivers, the maximum allowd resolution drops to 1024x768. Note: I have an SLI configuration. Also, This is the maximum allowed resolution. It is too low for my monitor.
View 5 Replies
View Related
Jun 5, 2008
I've been trying to increase the full-screen resolution of 'visualize' without much success. I've openned up the the 64-bit version of WMP and changed the resolution in Tools - Plug-ins - Options - Visualization - Battery - Properties, but even in WMP that doesn't work and obviously doesn't work in VMC. Has anyone had an success in changing the resolution?
View 5 Replies
View Related
Mar 23, 2008
In experimenting with different resolutions I tried (1), but when I tried to change it I was unable to reach to the bottom of the window where, I imagine, choices reside. I've dragged the window up as far as it will go and dropped the Taskbar down out of the way, but I still cannot reach the buttons to change the resolution. What key strokes or other actions do need to do to change the resolution?
View 5 Replies
View Related
Jul 17, 2008
Im not too sure if this is the right place to write this. but my laptop went flat, and then i charged it, and it was on the lowest screen resolution possible. i tried 2 change it, but its still horrible, theres no way to put it back to the original resolution. i tried updating drivers and stuff, and some of the stuff u guys write isnt good for ppl hu dont understand computers haha.
View 6 Replies
View Related
Jan 26, 2009
System Specs:
Dell XPS M1710 -
80gb HDD
Intel Core Duo T2600 (2.16 GHz)
2 gb RAM
NVIDIA GeForce Go 7900 GTX 512 MB graphics card
WUXGA Truelife Glossy screen
I recently reformatted my harddrive with gparted. Created a primary partition (nfts) and installed vista home premium 32 bit on it. On the remaining unallocated space I installed Ubuntu 8.10. Before I did this my display in vista was beautiful, 1920x1200 resolution. Ever since I reinstalled vista and reinstalled my nvidia driver it lists the current resolution as 1920x1200, but I can definitely tell that it is not the same resolution as before. I'm very frustrated because my monitor/graphics card is definitely not running at 1920x1200 resolution, but it says that it is under my display settings.
View 9 Replies
View Related
Sep 14, 2009
I am running Windows Home Premimum 64 bit. I started having numerous problems a couple of weeks ago, including: Screen resolution was changed, Clear Type and User Account Control were disabled, computer would stop responding temporarily of lock up completely, blue screen at boot up or computer would boot to recovery console, monitor would be on at boot up but would not come out of sleep mode. Finally last night the key board and mouse (both wired) stopped working. I changed the mouse and keyboard to ones that used usb connectors and was able to boot up again, and this keyboard and mouse work, but still having performance issues (hanging, 3D screen saver runs jerky. I tried to run Trend Micro Housecall but could not get to run. I tried to update the Nvidia drivers several times and my computer would shut down before the installtion was completed everytime. I would get a blue screen with the notice that the computer had been shut down to protect it from damage. Norton 360 found nothing. I have since uninstalled Norton. Ran AVG, nothing.
Finally Kaspersky online deep scan found these:
C:ProgramFiles(X86)Online ServiceseBayWizLink.exe Trojan.Win32Agent.cwkw
C:ProgramFiles(X86)Online ServicesESPwizlink.exe Trojan.Win32Agent.cwkw
C:ProgramFiles(X86)Online ServicesquickenfcWizLink.exe
Trojan.Win32Agent.cwkw
But did not offer a way to remove them.
View 9 Replies
View Related
Mar 26, 2008
I am having ongoing resolution problems when I install my video card drivers. BEFORE I install them, my screen resolution is 1280x1024 which is what it should be. AFTER I install the nVidia drivers, the maximum allowd resolution drops to 1024x768. Note: I have an SLI configuration. Also, This is the maximum allowed resolution. It is too low for my monitor.
View 5 Replies
View Related
Jan 16, 2010
Just purchased the captioned LCD display without HDMI cable supplied, only VGA and DVI cables (I'll call the shop selling this display tomorrow) The max resolution can be achieved is; 1400 x 1050 But the display can support 1920 x 1080 resolution. However I can't find the video driver for update on; ASUSTeK Computer Inc. on Fedora 12 (Linux) running on another HD in the same box can support; 1920 x 1080 60Hz
View 8 Replies
View Related
Jun 9, 2008
Being on a 17" CRT 1024 x 768 resolution for a long time, would it be alright to move over to a 13.3" screen with 1280 x 800 resolution? Yes I've been told by many of the designers that it is not good at all but I think the comments weren't exactly right since they are already working on large monitors with high resolution support. So what say you? Of course I'm no professional in designing, currently still studying and learning.
View 7 Replies
View Related
May 28, 2008
I have Vista Business. The problem is that the screen resolution resets itself after a restart. When it comes up, the resolution is 1400x1050, which makes the font tiny. I reset to 1024x768, apply it, and things are fine until the next day when the computer is restarted.
View 4 Replies
View Related
Feb 7, 2010
I have Windows 7 Ultimate RC 32 bit that I'm using in dual-boot mode with Windows XP Professional SP2. I am using an old ViewSonic monitor and I don't have the drivers. Windows XP is apparently using a generic driver which lets me set any screen resolution I like and I usually use 1024x768. Windows 7 has a generic driver which will only allow 800x600. Does anyone know if the Windows XP video driver will work in Windows 7 and, if so, the best way to copy and install it?
View 4 Replies
View Related
May 10, 2009
I have my screen resolution set to 1920x1200, native is set to this, nvidia control panel confirms it, yet every time I restart after a shutdown or an update, my screen resets to some random low resolution such as 1020x768 or 800x600 (the worst of the 2, it set the colors all funky). Every time after it does this, I have to go back and change the resolution back, and move all of my icons back to their places. I have tried everything to get rid of this problem, even such as to change the registry defaults for resolution. I have base video off, and all other solutions people seem to have do not work. I have had lots of experiences with computers, but this one has stumped me. If I missed a default or it is one of those things that just is so obvious that you overlook it
View 4 Replies
View Related
Jun 27, 2008
I changed my screen resolution in order to better view a video. When I changed it back, the Send/Receive window that shows incoming and outgoing mail popped up far to the left of the Windows Mail window, instead of right above it where it has always been. I re-started the computer, but that did not fix the problem. I want to get the Send/Receive window to pop up where it used to--it is currently nconvenient for viewing.
View 8 Replies
View Related
