Although my card supports 2xxx x 1xxx resolutions and my monitor supports 1920x1200 optimal; I can only reach 1920x1080 at maximum resolution. All my drivers are up to date. What can I do to solve this problem? Can I do anything? What is wrong?
View 7 RepliesI just installed Windows vista 32-bit and it won't let me adjust the resolution and some programs are not working when I go into programs with graphics it says "Game is running in software rendering mode: Hardware Acceleration is either disabled or not supported by your video card driver, which could slow game performance. Make sure you have the latest video card driver installed and that the hardware acceleration is turned on." As far as I can tell it is turned on. I updated my generic PnP montior and my SGA video drivers. I don't know what else to do. Anyone have any ideas.
View 6 Replies View RelatedAbout once a week my screen resolution seems to be changing--I think on its own. I do have small kids that sometimes touch the keyboard, so that might have something to do with it, but I don't think so. I say its the resolution, but I am not even sure of that. When it happens the icons get bigger--and webpages font sizes become too big for a page. I have tried manually adjusting the screen resolution, but that doesn't seem to be the answer--it doesn't put it back the way it was before. To fix the problem, I have been restoring my system to previous dates---but it always seems to re-occur.
View 7 Replies View RelatedI'm having some problems with my screen colour and resolution atm. Tryed system restore, updating drivers and generaly looking on google for answers but most are unclear at best.
Imageshack - myscreen
Imageshack - devices
These are 2 SS. 1st is what my screen looks like. Although I must say it looks alot worse on my acctual screen. Second Is what I figure the problem is due to them simply not working. NVIDIA GeForce 8300 GS < Windows has stopped this device because it has reported problems. (Code 43)
I have an older Dell PC and have re-installed Windows XP on it three times. The OS seems to work fine each time but it gives me no way to adjust the resolution. I go into adjust screen resolution and it wont let me adjust anything, the slide bar, in advanced, and under settings. I can't change anything even trying to load the software for the monitor fails?
View 6 Replies View RelatedHow can i force a bigger screen resolution? My current resolution is 1360x768 and i would like to make it larger heres my system specs, Hp slimline s3700y, Widows Vista Home premium SP1, Video card: NVIDIA geforce 6150 se, Monitor: Sony 32" LCD Bravia, usiing RGB input on my tv. I updated all my drivers and still no luck... I know its possible because on my other outdated computer i can get 1920x1080 with no problems and the resolution looks good and not blurry
View 8 Replies View RelatedI have just upgraded my PC to Vista from XP and purchased a new monitor, capable of supporting 1440 x 900 resolution. Problem is that the screen resolution cannot be changed and is fixed at 640 x 480. I've tried via the settings in the control panel but I cannot drag the mouse on the slider bar from low to high resolution.
The online help suggests I may have an inadequate video card, Does anyone know how I can check this? What card do I have now and what do I need? Or is there another solution?
I am having ongoing resolution problems when I install my video card drivers. BEFORE I install them, my screen resolution is 1280x1024 which is what it should be. AFTER I install the nVidia drivers, the maximum allowd resolution drops to 1024x768. Note: I have an SLI configuration. Also, This is the maximum allowed resolution. It is too low for my monitor.
View 5 Replies View RelatedI've been trying to increase the full-screen resolution of 'visualize' without much success. I've openned up the the 64-bit version of WMP and changed the resolution in Tools - Plug-ins - Options - Visualization - Battery - Properties, but even in WMP that doesn't work and obviously doesn't work in VMC. Has anyone had an success in changing the resolution?
View 5 Replies View RelatedIn experimenting with different resolutions I tried (1), but when I tried to change it I was unable to reach to the bottom of the window where, I imagine, choices reside. I've dragged the window up as far as it will go and dropped the Taskbar down out of the way, but I still cannot reach the buttons to change the resolution. What key strokes or other actions do need to do to change the resolution?
View 5 Replies View RelatedIm not too sure if this is the right place to write this. but my laptop went flat, and then i charged it, and it was on the lowest screen resolution possible. i tried 2 change it, but its still horrible, theres no way to put it back to the original resolution. i tried updating drivers and stuff, and some of the stuff u guys write isnt good for ppl hu dont understand computers haha.
View 6 Replies View RelatedSystem Specs:
Dell XPS M1710 -
80gb HDD
Intel Core Duo T2600 (2.16 GHz)
2 gb RAM
NVIDIA GeForce Go 7900 GTX 512 MB graphics card
WUXGA Truelife Glossy screen
I recently reformatted my harddrive with gparted. Created a primary partition (nfts) and installed vista home premium 32 bit on it. On the remaining unallocated space I installed Ubuntu 8.10. Before I did this my display in vista was beautiful, 1920x1200 resolution. Ever since I reinstalled vista and reinstalled my nvidia driver it lists the current resolution as 1920x1200, but I can definitely tell that it is not the same resolution as before. I'm very frustrated because my monitor/graphics card is definitely not running at 1920x1200 resolution, but it says that it is under my display settings.
I am running Windows Home Premimum 64 bit. I started having numerous problems a couple of weeks ago, including: Screen resolution was changed, Clear Type and User Account Control were disabled, computer would stop responding temporarily of lock up completely, blue screen at boot up or computer would boot to recovery console, monitor would be on at boot up but would not come out of sleep mode. Finally last night the key board and mouse (both wired) stopped working. I changed the mouse and keyboard to ones that used usb connectors and was able to boot up again, and this keyboard and mouse work, but still having performance issues (hanging, 3D screen saver runs jerky. I tried to run Trend Micro Housecall but could not get to run. I tried to update the Nvidia drivers several times and my computer would shut down before the installtion was completed everytime. I would get a blue screen with the notice that the computer had been shut down to protect it from damage. Norton 360 found nothing. I have since uninstalled Norton. Ran AVG, nothing.
Finally Kaspersky online deep scan found these:
C:ProgramFiles(X86)Online ServiceseBayWizLink.exe Trojan.Win32Agent.cwkw
C:ProgramFiles(X86)Online ServicesESPwizlink.exe Trojan.Win32Agent.cwkw
C:ProgramFiles(X86)Online ServicesquickenfcWizLink.exe
Trojan.Win32Agent.cwkw
But did not offer a way to remove them.
I am having ongoing resolution problems when I install my video card drivers. BEFORE I install them, my screen resolution is 1280x1024 which is what it should be. AFTER I install the nVidia drivers, the maximum allowd resolution drops to 1024x768. Note: I have an SLI configuration. Also, This is the maximum allowed resolution. It is too low for my monitor.
View 5 Replies View RelatedJust purchased the captioned LCD display without HDMI cable supplied, only VGA and DVI cables (I'll call the shop selling this display tomorrow) The max resolution can be achieved is; 1400 x 1050 But the display can support 1920 x 1080 resolution. However I can't find the video driver for update on; ASUSTeK Computer Inc. on Fedora 12 (Linux) running on another HD in the same box can support; 1920 x 1080 60Hz
View 8 Replies View RelatedBeing on a 17" CRT 1024 x 768 resolution for a long time, would it be alright to move over to a 13.3" screen with 1280 x 800 resolution? Yes I've been told by many of the designers that it is not good at all but I think the comments weren't exactly right since they are already working on large monitors with high resolution support. So what say you? Of course I'm no professional in designing, currently still studying and learning.
View 7 Replies View RelatedI have Vista Business. The problem is that the screen resolution resets itself after a restart. When it comes up, the resolution is 1400x1050, which makes the font tiny. I reset to 1024x768, apply it, and things are fine until the next day when the computer is restarted.
View 4 Replies View RelatedI have Windows 7 Ultimate RC 32 bit that I'm using in dual-boot mode with Windows XP Professional SP2. I am using an old ViewSonic monitor and I don't have the drivers. Windows XP is apparently using a generic driver which lets me set any screen resolution I like and I usually use 1024x768. Windows 7 has a generic driver which will only allow 800x600. Does anyone know if the Windows XP video driver will work in Windows 7 and, if so, the best way to copy and install it?
View 4 Replies View RelatedI have my screen resolution set to 1920x1200, native is set to this, nvidia control panel confirms it, yet every time I restart after a shutdown or an update, my screen resets to some random low resolution such as 1020x768 or 800x600 (the worst of the 2, it set the colors all funky). Every time after it does this, I have to go back and change the resolution back, and move all of my icons back to their places. I have tried everything to get rid of this problem, even such as to change the registry defaults for resolution. I have base video off, and all other solutions people seem to have do not work. I have had lots of experiences with computers, but this one has stumped me. If I missed a default or it is one of those things that just is so obvious that you overlook it
View 4 Replies View RelatedI changed my screen resolution in order to better view a video. When I changed it back, the Send/Receive window that shows incoming and outgoing mail popped up far to the left of the Windows Mail window, instead of right above it where it has always been. I re-started the computer, but that did not fix the problem. I want to get the Send/Receive window to pop up where it used to--it is currently nconvenient for viewing.
View 8 Replies View RelatedI have a Samsung LCD 720P HDTV 32" that I have been using as a secondary monitor. I just bought a new computer (HP Elite M9060N) with vista on it and a Geforce 8500GTS NVIDIA card (factory installed). When I try to extend my desktop onto my tv (using Dualview) it doesn't fill the entire screen. It leaves a black ring around the outside. I've tried adjusting the resolution, but it doesn't work. In addition to the ring, the resolution on the tv looks horrible. I have the refresh rate maxed out and tried flip flopping which monitor is my primary but just can't seem to get it to work. I'm also using a Samsung LCD 20" monitor and connecting my extra monitor with an HDMI cable.........
View 5 Replies View RelatedI recently purchased a new system primarily to run MS Flight Simulator FSX. The OS on my new righ (Packard Bell iXtreme) is Vista 64bit and I am already finding out that many addon programs to FSX are not supported by 64Bit OS. My question is whether or not I should upgrade to Windows 7.
View 4 Replies View Relatedi think my vista has lost few of it font that it previously supported.
View 5 Replies View RelatedWhen i try to send an email to some internet "contact us" link, it don't work. a couple windows come up- i write my message, add my name and then my email, which is hotmail. then it says it doesn't support hotmail, but aren't wndows live and hotmail linked somehow, is it a default email prob. or what?
View 5 Replies View RelatedI have been trying to burn a clutch of photographs to a cd for the first time on my Dell Laptop using Vista. I am using old cds (CD-RW) that I know are free and I have been using them to transfer photographs from an older PC so I know that laptop is able to read the cds. I have had to use the old PC to scan the photographs as my scanner is not supported by Vista.
However, when I come to burn the photographs I get a message that windows cannot complete the format or it hangs after taking forever to try to complete the format. I have to admit I do not understand the process and thought I would be able to drag and drop as I have done with a flash drive. I did have Nero on my old PC but I cannot use that as I cannot get the photographs back to the PC from the laptop. I am fairly sure the old PC does not support a flash drive. Also the old PC does not have an Ethernet port.
I havent been on these forums in a while, which is good becuz it means i have had no problems but... i want a new graphics card becuz my intel card doesnt currently support the detail i want it to.
I currently have the Moblie intel(R) 965 express chipset family, but it doesnt support lighting detail on a game i play. its browser based, and the tech forums for that game says its my graphics card. I am awaiting full confirmation as of yet. Until then, i would like a nvidia graphics card series 6 or upwards, and i am looking to pay £50 so i dont think i am gonna get the 9 series
Im trying to put info. in the Incoming mail server and Outgoing mail server box. I have know idea what to put in it. I keep getting error messages. This is getting very frustrating because i used MSN and it no longer supports it.
I've been using AVG on one of my computers (with OS 2000 prof) and have loved it (coupled with Zone Alarm). My parents just got a new HP desktop computer with Vista Home Premium installed. I installed the free edition AVG 7.5 and free edition Zone Alarm and everything worked fine. Then AVG sent out notices that AVG 7.5 free edition would not be supported any more (definition updates). I left 7.5 on and downloaded 8.0 thinking it would update over it. But that failed. So, I uninstalled 7.5 (admittedly, I did not turn it off first. Then I downloaded and installed 8.0 free edition. At this point, it seemed to work just fine. I had to uninstall it a week or so later (we won't go into those details) for reasons other than it not working properly.
I then proceeded to download 8.0 free edition once again. So, here is where it all went bad: It downloaded fine, it did its first update fine, it restarted itself fine. However, when I shut down the computer and then put it back on, Vista got caught in a loop - getting as far as the Windows Password/Login menu and then looping back to the initial start up process. The only way to get out of it was to use the F8 function and choosing Use Last Good Configuration. I then turned off AVG and Vista still got caught in the loop. I had to completely uninstall AVG for the computer to shut down and then start up normally. I really hate my parents' computer being vulnerable with no anti-virus on it currently. Not sure what to do. AVG will not help me because its a free edition (even though I use other licensed products of theirs) and I've found no help in their user forum.
main reason is because my current video card isn't supported on vista and is only running on 16bits instead of 32 and overall picture display seems to be dark then usual even with the brightness on the monitor turned up all the way but i only have a regular 15.7inch monitor.
View 7 Replies View RelatedI have some ICO Images? the only program that opens this image is ACDSee 10? I have Adobe lightroom, photoshop, illustrator, flash and photoshop elements. Is ACDSee 10, the only program that can only open these types of images? I tried all my Adobe, but it says file type not supported?
View 8 Replies View RelatedWindows 7 release is nigh, and of course Windows Vista will still be supported, but until when? Well, I know that Windows XP will be ditched in April 2014, when will Vista stop being supported?
View 6 Replies View Related