I got 3 vista home basic stations (a,b,c) with 1 of them (a) as a server. Everything works fine for station b. For station c, I did the same for mapping the drive as in station b. But whenever I restart the station, the map network drive is shown as disconnected.
View 4 Repliesmy problem is that when once i plug in my usb drive or any hardwares (eg: ipods), it starts fuctioning , but when i try to remove it from the computer, the message "safe to remove hardware from the computer" appears , but the device would not have been actually stopped working. so i am forced to remove my hardwares even when the devices are working by which i fear that my devices malfunction.
View 9 Replies View RelatedBought a Freecom Network Drive (LINK) from PC World today and got it set up and it seemed to be working fine on my Vista computer until I tryed to get it set up on my XP computer. It seemed to get setup ok but then the whole thing just stopped working. The hard drive spines and it works fine when plugged in as USB device but when trying to connect it to the network it simply does not show up. I have a Belkin G+MIMO Router and the Network Hard Drive is a Freecom Network Storage Hard Drive 250GB
I recenctly bought a new machine that has Vista Basic installed on it. I installed the latest drivers for my Netgear wireless adapter which are supposed to be Vista compatible. However, although I can get connected, I often have to mess around with the networking settings first and then the connection will only last around 15 minutes before the adapters led stops flashing. I then have to reboot to get a connection again. I tried the adapter back n my old XP machine and it is fine. As soon as the XP machine boots, the led indicator starts flashing and it doesn't stop until you shut down. With the Vista machine, the adapter often doesn't start flashing until you actually connect and then it will just stop after a short while. I've been messing around with this for weeks now and got nowhere. I would have suspected the adapter drivers, but it seems as though there are a lot of other people with the same problem on different adapters.
View 9 Replies View Relatedthe mouse disconnecting and stopping and then then re-connecting a few moments later
View 5 Replies View RelatedI use HDMI port to connect my Sony Vaio with Vista Home premium to Samsung full HD LCD TV to watch the movies using VLC player, after I disconnect the cable all the Icons get messed up on desktop & I have to rearrange. Can anybody has solution for this.
View 8 Replies View RelatedI have caught the Antispyware Soft virus/malware. Advice please on how to remove it . I have problems connecting to the internet,
View 7 Replies View RelatedFor me, a Synchronize All often disconnects from the internet after checking my only email server, but before checking any of my newsgroups servers. I found the Accounts screen for my email account; nothing is entered there. All the email and newsgroups accounts have a checkmark before Include this account when checking for new messages.
However, when doing a Synchronize All, I sometimes but not always get an error message after the check of the email server, but before the check of any of the newsgroups servers, saying there is no longer any connection to the internet and asking if I want to try the connection again. When I tell it I do, the connection is usually restored within a few seconds.
I would like to setup a VPN so that i can share my home videos and pictures with my family across the state. I would like to be able to setup a network drive so that vista media center can monitor it. This way we could turn on vista and browse to the vids or pics and see what is new. This would save a lot of hassle of emailing them all the time. We all have the same dynamic isp, routers and Vista proff or ultimate. So i'm thinking that if i can get 2 computers to work like i want over a VPN then i'll have no problem with the rest of the families computers. I have used Cisco to successfully setup a vpn across country using one computer with vista and the other with xp. Is vista's vpn setup similar to cisco's? Is Vista capable of creating what i described above?
View 9 Replies View Relatedthis is really for windows 7 however I didn't see a group for that yet. We have replaced our old XP machines with Windows 7 and are now getting a red "X" on network drives. Some people don't have a problem and can access them and others get drive not available. How to fix? We have a Windows 2003 AD in mixed mode. Our people get their mapped drives from a batch file we created that looks like this: (net use p: \server1sharename /persistent:no) All servers and PC are up to date with all MS patches.
View 6 Replies View RelatedI'm running Vista Ultimate, 32bit, with a home network and internet. Recently I bought, and installed, the "Argosy Mobile Video HDD Pro," model #HV359T (it's essentially an external 1.5TB drive housed in a small case that lets you store and play media -- movies, music, pictures, etc. Nifty thing.) I set it up and it works just fine, and downloaded some movies on my home TV system via USB. BUT, I just can't map it to a drive on Vista on my home network.
The error I get is simple: "Windows cannot access 192.168.1.103" (The IP addr of the box). I can ping it, the supplied utilities can see it, but Vista just can't when I try to map it. I have no further diagnostic info, just that Windows can't access it; not too helpful. I suspect it's a security issue, but that's just a wild guess.
I have a desktop that is running 64 bit Ultimate and my laptop is running 32 bit Home Premium. I have the laptop set up as wireless and the desktop as direct connect to the router. I set up a home network so I can access my drives from either machine. I can access two desktop drives from my laptop, but it won't let me access some of the other drives. From the desktop, I cannot access any drives on the laptop. The drives that it won't let me access says "\BueningsMy Music is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Access is denied."
Why would it let me access some drives and not others? I have the Network Discovery amd File Sharing turned on. All other items are turned off, including Password Protected Sharing. I followed the steps of "Set up a connection or network" and it is set up as a Private Network. Let me know where things may be goofy or things to check. I'd like to get this going correctly if possible.
I had to create a windows recovery disk
I used it to system restore her system to a date before she had set her password
and on the menu it said install vista
and on my old laptop that my dad has it's a 2gb compaq presario
they're not made anymore
it has low memory it's very slow and really
hardly useable without getting very stressed
so if I used the recovery disk I created
and click install vista
will it be like a new laptop?
there's nothing needed on the laptop
so nothing is being lost by resetting the laptop
it's got vista home premium x86
I have a user with a french vista laptop. Every other person are joined to the domain and can view other systems (boths XP and Vista) on the network. They can share files and access shared drive. This user however is not joined to the domain and can view any other system on the network. He can view but not access other vista systems. he cannot ping any system on the network and cannot access any shared drive. He can however access network printer. I will like him to be able to access te shared drive, how do i go about it?
View 4 Replies View RelatedIs there some easy service to Map a Network Drive to my VISTA?need to bring files from home to work on regular basis .
View 4 Replies View RelatedI haven't found a solution to this yet: I have 2 network driver established. They reconnect during reboots and are accessible fine. For some reason they stopped being visible in explorer until I explicitly go to them by enteing the letter in the address bar. Then one or both with show up (usually just the one I put in) I also have an internet webdav drive that also does not show up until i put it's letter in the address bar. If I use applications to access the letters, they show up ok in that application's file open/save box.
View 4 Replies View RelatedI'm trying to troubleshoot a problem. I have a Win7 Home Premium 32bit netbook and a Vista Home Premium 64bit laptop on a wireless network. I'm able to share files, folders, and a printer with no problem, but I can't seem to share the DVD drive on the laptop. I want to be able to install software on the Win7 netbook using the Vista laptop's DVD drive over the network. The DVD drive is shared and given full control permission. It shows up on the Win7 netbook, but when I try to access it, it says Windows cannot access (drive name). You do not have permission to access (drive name). Contact your network administrator to request access.
After browsing the net for a solution, I think an entry in the Vista registry is restricting access to the drive through a group policy. I saw on another forum where changing the Default value to 0 may correct this issue. I also changed the ValueType value to 0. Neither worked for me. Then I noticed that DisplayName value, @wsecedit.dll,-59098. (See picture) I researched and found out that it had something to do with a Group Policy restriction. Since there is no Group Policy Editor for Vista Home Premium, could I simply delete that entry? How else could I change or edit that? (I saw on this forum where someone is working on Group Policy Editor for all versions of Vista).
I have a 1 TB external hard drive connected to my network. I would like to back up my laptop and setup automatic backup on a weekly basis to this drive like I have done with my desktop. However, the damned thing keeps asking me for a username and password that I did NOT set up on the computer that has the hard drive connected directly into it. When I use my Windows username and password for the computer the drive is connected to, it tells me it is invalid. So what, exactly, is the password if that isn't it? I have password protection turned OFF on my network, so it shouldn't even ask me for one.
View 5 Replies View RelatedResponded as possible?!
1)what are the benefits of mapped drive and sharing folders in a home network?
2)which folder cannot be shared? can you think of reason why an operating system might not allow certain types of folders to be shared ?
3)Amapped drive provides apointer to a network resourse,but mapped drive letters are said to be locally signification only.what do you think is meant by locally significant ?
Been trying for hours to use Xbox 360 to access music and other files on my compuer, using both Drive address and network address. ALL files can be seen successfully on WMC on the Vista computer but nothing on the Xbox 360 -- except some photos on my son's XP machine (that worked easily).Could really use a simple solution to this please!
View 5 Replies View RelatedI am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
I'm running Vista on a PC that has a hd that has been formated into 3 discrete drives.Vista is loaded onto the C drive, programmes are loaded onto the d drive while i have my data stored on my E drive. By default any documents I save are directed towards My Documents on the C drive - how I go about changing that so the default is my Documents on the E drive?
View 9 Replies View RelatedI have Vista x64 and I have read threads on this for weeks and can't fix it. I have file sharing/network discovery on, private network, password protection disabled, my shares set to everyone and everyone is on the same workgroup. My problem is that the x64 Vista computer will not see any of the XP (x86 or x64) computers and they can't see it from the Network Neighbourhood. However, if I type the IP address of the XP computers I
can access them. On the XP computers if I type the IP address I get an error that it isn't accessable and I might not have permission. However, if I type \192.168.0.100share or any of the other share names I access it just fine. pinging works too by IP but not by name. If I boot into the x86 install of have of Vista I can access XP computers from Vista and the Vista from XP by name and everything without typing any user names. The only differince between the two aside from x64 and x86 is that x86 isn't patched past SP1 as I don't use it often. Lastly after installing that XP patch I can see the x86 XP computers by name from the network map feature on Vista, still can't access them by name though...
I'm using Vista Home Premium and Windows Update tells me I'm up to date.
Every so often the Network icon in the System Tray tells me that it is not connected to a Network (by displaying a red X) though I can clearly see that I am.
I'm trying to network my new Optiplex 740 with Vista Business (32bit), and Norton 360, to my old Euro PC with W2K Pro. and SystemWorks, using basic Belkin /Realtek cards and yellow ethernet cable. My broadband connection is through my old machine and works perfectly, as does the network card installation.
My new machine also indicates that its card is correctly installed and functioning correctly. BUT the Network and Sharing Center window shows this computer as linked to an Unidentified network and no connection to either the other computer or broadband connection.........
I have bought DD a laptop for Christmas and thought I'd get it all set up beforehand. I already have a wireless network here at home, with 2 desktops running xp) and a macbook, they connect via a belkin wireless modem router. Vista however, doesn't even find a network, I get a message saying the network cable is nplugged. Its wireless enabled and the switch is on
View 9 Replies View RelatedOne usb ethernet adapter for internet connection through an old router, one for a Linksys Wireless G router hard wired to remote security cameras sums up the problem where one cancels the other out. This is a problem for XP, Vista, and even 7 beta while the primary system still runs XP. The dsl connection is through an old dsl setup using a usb adapter while the Linksys pci adapter card or usb adapter once installed becomes the default network adapter.
The wireless router itself is plugged with the RJ-45 ethernet adapter directly into the main controller/dvr box for live wireless feed to the main XP system or this one as a second means along with direct plug in to a tv set in the room where the main box is located. In XP, Vista, and even the later 7 beta the same problem of running two adapters without conflict is the main question needing a working solution. This thread is intended to tax the most network familar people here.
The landlord runs the main XP system with eventual plans to upgrade to Vista while this system serves as a testing machine a good deal of the time explaining multiple OSs as a rule. The router and adapters are in working order not seeing any defects while canceling the original dsl adapter out when installed. That takes out the online connection in the process.
Just returned from holiday and while we were away I changed my laptop network in vista from private to public as advised and the internet worked fine. Now at home I can’t connect to my router, and I get a message saying that the details held on the computer is not the same as the router. Also there is no “customise” function being shown on the network and sharing centre screen to switch back to private network. I’ve tried everything to set up a connection, even a new one, but the same message appears all the time.
View 7 Replies View RelatedCan I set up network of two computers with Windows Server 2008 and Windows Vista Home Basic with FireWire? How both systems will detect connection of two computers with FireWire cable? Does that connection make possible file exchange?
View 6 Replies View Relatedwhen booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
View 9 Replies View RelatedDoes 'Local Disc' D mean it is a drive inside my machine or could it be my external hard drive?
View 9 Replies View Related