I keep getting the following error when I try to print. Job Status Window Interface has stopped Working. I called Lexmark and they said it was a windows problem. Has anybody had this problem? Is there a fix for it?
View 9 RepliesWhenever I attempt to start the Task Launcher I get a message that reads. Window has stopped working.
View 4 Replies View RelatedI bought a Lexmark 3400 series all in one printer. I have been using in with my desk top computer with Mcro. Offive and it has worked great. I recently purchased a lap-top with Vista. We loaded the printer program on to the lap-top and made it the default. When we go to print we get the message that the computer can not communicate with the printer.
View 4 Replies View RelatedThe problem comes from trying to install new applications i.e. firefox, winrar, and utorrent, are just a few that we have tried to install. The same error keeps occurring, it will automatically come to the error window stating that the program "has stopped working" and proceeds to search for a solution. So far I have run the program as an administrator, compatibility mode, and have tried searching the even id #1000 on the windows support forums. Also it is the same exception code every time occurring from application error 0xc0000005.
View 7 Replies View RelatedI have a Lexmark Printer which worked with Windows 98. Now it won't work with
my new Emachines computer with Windows Vista Home Premium. I have downloaded
the recommended updates, but all I seem to get is the documents put in the
queue, but does not send to the printer to begin printing.
I have a Lexmark Optra R laser printer that I bought in 1996! But it works great and will outlast anything you can buy today. When I got my new computer with Vista I found I couldn't install it. The driver seems to be available, but the computer just doesn't recognize the printer.
View 7 Replies View RelatedMy Lexmark X2450 has been working on my Vista PC since May'07. Sometime in the last few weeks something has changed and initially it seemed that it wouldn't print anything. Lots of experimentation and uninstalls later, I've come to the conclusion that the printer is O.k. as it will print test pages and IE web pages, but I can't get it to print anything else, (Word docs etc. These show as spooling, printing then deleting in the print queue. Note: Last night, I gave up trying at 2am turned the printer and PC off and turned it off at the wall - the next morning my son turned on the PC and some of the print attempts from last night printed!
View 6 Replies View RelatedJust bought a new computer (Alienware M17 with 64 bit windows vista ultimate) and installed the drivers for my Dell 924 all in one via a Dell 3300 wireless printer adapter. The printer is working fine with my new computer - however after I installed the printer the following message pops up about every 15 minutes:
Printer communication system has stopped working and was closed. A problem caused the application to stop working correctly. Windows will notify you if a solution is available. Sometimes an additional prompt appears to submit the problem to Microsoft =96 however Windows has yet to find a solution to the problem. The only printers I have installed on my system are my =93Dell Photo AIO Printer 924=94 and the default =93Microsoft XPS Document Writer.=94 I=92ve never seen this issue with any of the other computers that use this printer running 32 bit versions of vista.
wmp stopped working. here is my problem info ..
Problem signature
Problem Event Name: APPCRASH
Application Name: wmplayer.exe
Application Version: 11.0.6001.7000...................
Has anyone successfully installed Lexmark X 4500 printer on 32bit Vista Ulimate? I have been at it for a few days also with tech support and so far no luck. I had downloaded the vista driver software from the Lexmark web site *cjb3500-4500en.exe* - it installs the software but cant find the vista driver. I have tried a clean uninstall, reinstalling the drivers, installing the drivers manually with add printers, and nothing has worked!!! also restored the vista to a before point and reinstalled still no use.
View 4 Replies View RelatedI have this printer from some years and I'm happy with it. Now the problem is with Win Vista. There is not a specific drive for this Printer under Vista. The printer print ok, no problem for this, the problem is the Printer Monitor that can not see the inks status. So I can not know if a cartridge is out of ink. Tried to contact Espon for new driver but no chance.
View 5 Replies View RelatedI have Canon BJC-2000 Injet printer. It always worked perfectly with Vistas. Now since I changed the ink cartridges, it won't work. I send the print job and in the print queue is says "error - printing" and that's it.
View 9 Replies View Relatedhey guys another thing here i have a Lexmark X1185 that i have networked for along time with xp on my desktop and vista on the laptop, now since i installed vista x64 on the desktop i can no longer print from the laptop, yes i know i need to reinstall it on the laptop one problem though i can't do that. i can find the printer but it wont connect to it.
i keep getting "windows cannot connect to the printer. operation could not be completed (error 0x0000000d). i do have both the x64 drivers and the x86 drivers installed on the x64 desktop.
I have read many previous forums about AoE II issues, but none seem to apply to my issue. Late last year I successfully installed AoE II on my computer and was able to play it in Windows 98 compatibility without any issues. More recently whenever I try to play it, the window "Age of Empires II has stopped working." pops up.
I have updated patches, I have tried using files from a flash drive, I've tried installing and reinstalling, disabling graphics card, and many of the other suggestions read on this forum, none of which worked for me. I also installed the Trial version, and ironically, it works perfectly fine.
when I try and download my Lexmark X1240 it will go all the way to the end of the download and just at the end it says my windows interface stop working and has stopped the program. so my l printer will not work.
View 5 Replies View RelatedLately when I've tried looking at different folders and files on my hard drives I keep getting "Windows Explorer has stopped working and will restart." It's driving me nuts, I can barely do anything.
Also, same thing with Internet Explorer...I'm getting real sick of Vista's shoddiness..
Vista Home Premium too selective...I have a small LAN with a network printer and three XP Pro computers and one Vista Home Premium computer. All run through a WiFi/Ethernet access point, some hardwired and some via WiFi. This internal network uses assigned tcp/ip addresses (static ip's). The network is stable and everything has worked nicely for years, until now.The Vista and XP machines can access each other via Windows Explorer, so the LAN network is intact and working.
The problem:
1) The Vista machine stopped communicating with the network printer. After several printer re-installs, the Vista control panel printer function printed successful test pages, but no application will print.The test and setup utilities for the network printer, which gets direct access to the printer via the network, identify and can configure the printer, even as the applications report errors, such as "unable to initialize printer" or show a blank, empty page when viewed in print preview.
2) I cannot ping the printer in DOS, nor can I navigate to/access the printer via the browser with the Vista machine. The XP machines can both ping and access this printer (it has function, status and setup pages). However, the Vista machine will ping the XP machines, and ping and access/open the access point, and even the dsl modem.I have turned off the firewall, but it makes no difference.Since everything "used to work," I am at a loss.
By now it should be obvious that, under the Vista operating system, I have Home Premium, there is a severe overall, general "has stopped working" problem.
Thus far I've experienced:
"Internet Explorer has stopped working"
"Windows Explorer has stopped working"
"Word has stopped working"
"Sherlock Holmes Nemesis (Adventure Company) has stopped working"
"Outlook has stopped working"
"Acid 4.0 (Sony) has stopped working"
"Acid 6.0 (Sony) has stopped working"
"Sound Forge (Sony) has stopped working"
Is it not obvious by now that Vista has a problem, maybe a compatability problem, with everything from Internet Explorer and Microsoft Word to third party programs which cause programs, as I mentioned, even programs made by Microsoft, to "stop working"? Is there no an overall "stopped working" patch or something that Microsoft has released by now?...............
For some reason my Windows Mail has stopped showing html. As late as 5PM this evening I was able to see stationery posts , but now all I get is text.=20...
View 4 Replies View RelatedBought a Toshiba Satellite A100 from ebay with a cracked screen. I changed the screen yesterday, and the laptop worked well with no problems. Then today I decided to do a fresh installation of Vista because of all the previous owner had the hard drive in a bit of a mess. I installed using my normal Vista Anytime Upgrade disk and as soon as it finished installing I started getting all these messages like "Windows Modules installer has stopped working", "Desktop Window Manager has stopped working" and "TFncKy has stopped working". Things I've tried include reinstalling Vista from another disk. Using a different hard drive, changed the ram, installed all the proper drivers, installed vista updates (won't let me install SP1), staring at it menacingly & banging my head off the desk.
View 3 Replies View RelatedAll of a sudden some of my programs stopped working, for example catalyst control center is supposed to start as soon as vista starts, but now it gives me an error like:
"CCC.exe has stopped working"
Same with some others...
Yes i ran AVG, i ran malware, and superantispyware, none of them finds anything.
I cant even load daemon tools now, it gives me some error: "Engine loading was failed", cant uninstall it, it gives me another error, and some of the programs like netlimiter if i start them from my objectdock dock they automaticly stop working, only when i start them from the normal .exe they dont crash.
A few months ago, I had that lovely virus called Antivirus 2010. It got so bad that eventually, whenever I turned my Intel Pentium laptop on, the screen would just be black and there would be nothing except the virus window popping up with all the 'viruses' I had on my computer. Of course, a few other programs stopped running normally. The dock and widgets were gone. I had to create associations, which I never succeeded at, and this was all becoming way too frustrating. But I got by...
Last night, I decided to connect my HDMI cord to the laptop and watch a few episodes of Lost with my friends. Now, the HDMI button ('F8') wasn't working properly after my little mishap a few months earlier. When I pressed it, the usual, nice little pictures of different laptop-tv settings did not appear. Instead, I tried FN+ALT+F8. This seemed to work. But after we finished, I couldn't get the screen to return to normal again. It's all fuzzy and big, as if I was still connected to the tv.
** I tried personlization, and fizing screen resolution and stuff. It made things a little better, but the screen STILL isn't the same. Funny thing though. When I use print screen, the screen looks NORMAL. This morning, I rebooted my laptop. (Probably the stupidest thing I've ever done) I thought everything would be back to normal, but the screen is still the same, the nice little extras about Vista I was missing before have not returned, and my internet connection is gone.
i get this messege "hp que status has stoped working" what is that?
View 6 Replies View RelatedI'm not sure if this is a Vista problem or not but I have brother MFC 240C Printer and sometimes when I start up my Laptop I have to pull out the USB cable for the printer for the Laptop to boot up, sometimes it boots up fine.
View 4 Replies View RelatedMy printer is a Lexmark - (x-8350) All in One ---- Driver compatible with Vista is installed. The print is so small I need a magnifying glass to read it. I have attempted what adjustments I could make and nothing happens. I have contacted Lexmark and the help they provided me was minimal. I have never had this problem before and all of it sudden it pops up. I have new cartridges installed, however, not only is the print tiny, but the print is extremely light. I just kind of hate to have to go out and get a new printer without knowing if something can be to done to solve this problem.
View 4 Replies View RelatedI'll be helping a neighbor set up a new Dell with Vista Home Premium. She bought a Canon all-in-one MP610 printer with lots of application software on the CD MP Navigator, Easy-PhotoPrint, ScanSoft OmniPage SE, Easy-WebPrint, and ArcSoft PhotoStudio. I know i need to install the OCR software, but wonder about the rest. Do I need the MP Navigator for this printer to work? Will the Navigator or PhotoPrint software hijack any settings? Also, when I checked online, I found a new driver for Easy-PhotoPrint that's dated 10/08. If I install that driver after a full CD install for the printer, do I need to uninstall the older PhotoPrint utility first? I found general applications info on Canon's site. If there is a better source that can help me decide whether these utilities are needed.
View 4 Replies View RelatedMy window is not comming in. How can I get it to work?
View 7 Replies View RelatedI have installed vista 64bit Ultimate. Sadly it was a smaller version and the printer drivers have been removed. Now I cannot add my printer. So how do I go about setting up my printer?
View 5 Replies View Relatedinstalled hp printer driver on laptop and have a wireless connection but can't get printer to work?
View 7 Replies View RelatedI have a dell inspiron 1720 lap top with windows vista home edition I am trying to download the software and drivers for my HP Photosmart C7280 All-in-One printer. iget about 94 % completed then I get this error message Fatal error during installation. An error occurred during the installation of assembly policy.8.0.microsoft.vc80.ATL,processorArchitecture=???x86???,publickeyToken=???1fc8b3b9a1e18e3b???,version=???8.0.50727.91???,type=???win32-policy??? Please go to http://www.hp.com/support for troubleshooting information about ???fatal error??? and ???msi.unloadsupport??? I have gone to that web site and called hp tech support and no help there. they never seen this error message and thinks its a registry problem.
View 6 Replies View RelatedI need to get Vista install my HP printer/scanner PSC 950. It recognize the printer and try to install drivers for it, but does not find any drivers. It asks me to input my CD for the printer, and I have tried that with no luck. On HPs website the say that my printer is built in to Vista and that Vista should install it with no problem. This is not true since I cant make Vista install it.I have tried to unplug/plug the USB cabel for the printer, and Vista does the same thing every time, trying to install the driver for it with no success. I have Windows Vista Home Premium on a HP Pavilion dv6000.
View 8 Replies View Related