I have this printer from some years and I'm happy with it. Now the problem is with Win Vista. There is not a specific drive for this Printer under Vista. The printer print ok, no problem for this, the problem is the Printer Monitor that can not see the inks status. So I can not know if a cartridge is out of ink. Tried to contact Espon for new driver but no chance.
View 5 Replies
I have an Epson Stylus C64 printer which I am able to use as normal (with ink levels and status monitor appearing) on my old computer with Windows XP.
My new laptop is Vista and although I have installed the Epson Stylus Printer Software that came with the printer onto the laptop, the Ink Indicator Levels and the Epson Status Monitor options showing in 'Printer Prefences' seem to be grayed-out/disabled. I am unable to gauge my ink levels so have no idea how much ink I have available and/or when to replace it. The actual printing seems to be fine at the moment but I am unable to tell when the ink requires replacing.
I have tried to re-install the Epson Printer software but nothing seems to change - the ink levels and status monitor contine to be disabled/grayed out. I noticed that when installing the software I am asked to disable any anti-virus software - I have Norton installed but have no idea how to uninstall it - my computer also seems to be automatically provided with something called McAfee Security - again I am unsure how to disable this and whether in fact I need to do this - it may be that the anti-virus programs are hindering the Epson software from fully loading? Any ideas and/or suggestions would be most welcome.
I keep getting the following error when I try to print. Job Status Window Interface has stopped Working. I called Lexmark and they said it was a windows problem. Has anybody had this problem? Is there a fix for it?
View 9 Replies View RelatedI added a second monitor to the GeForce 7100 GS using a DVI-VGA adapter and for the life of me cannot get it to display anything, the monitor is just in sleep mode. I've got the latest driver, Windows is up to date, checked the cables, tried another adapter, tried everything but, still nothing. The second monitor shows up in the device manager and in the Nvidia control panel. It's enabled and set to extend desktops. It seems the system knows it's there because I can move the mouse over, but cannot see anything. The power light on the second monitor just flashes. I've swapped monitors over, to make sure there's not a problem with the display and it's fine. When I do that, the main monitor is then plugged in to the DVI adapter and then that one goes to sleep. Just seems whichever monitor is plugged in to the DVI-VGA adapter just doesn't want to work........
View 9 Replies View Relatedi have only one monitor, and somehow it is being treat as though its the secondary monitor in a dual monitor set up. i cannot view my start menu, or view any programs being opened, as when i try to open them, they presumeably open on the phantom primary monitor. even when i try to open display settings, i cannot see the box. i am able to move my mouse to the left border of the screen and move it off into oblivion, and occasionally drag random folders and short cuts over to view.
View 9 Replies View RelatedRight now I am running a vista machine with 2 monitors one widescreen and my old one. I keep all my sidebar gadgets to the other monitor so I can monitor temps and system diagnostics. Today, my sidebar is on my main monitor and no mater what I do it won't go back to monitor-2, no mater what the setting is in the sidebar properties. What is going on here?
View 4 Replies View RelatedI?m trying to install a network printer on a Vista machine. Vista is able to locate the printer on the network but when I select it for installation, for some time, Vista tries to connect and then pops up this message: "Failed Connecting to Printer - Access Denied" And then another window pops up with this message: "Spooler Subsystem Application stopped woring and has been closed." In fact the spooler service always stops, so I have to restart it on the services windows, within Administrative Tools of the Control Panel. The machine is new and has been installed yesterday. Everything else works fine. The printer I am trying to install is on a Windows XP Professional machine within the same network (naturally).
View 9 Replies View RelatedI have a Dell PC with XP Home and a Dell A960 Printer attached to it. I also have a new HP Laptop with Vista premium that has also had the same printer attached to it at times so the drivers are installed on HP laptop. I recently installed a router so I can use laptop wirelessly. That works fine. However, I am unable to print to the host printer wirelessly. I get message saying printer cannot communicate with computer. I tried everything I found on Google searches. I have enabled printer sharing on both. Do I have to make the Workgroup names the same and if so do I change the Dell with XP or the HP with Vista? I changed the Dell once to no avail so I changed back. Do computer names have to be same? I am a novice at networking.
View 6 Replies View RelatedDose anyone knows if they make a printer cable: I received a new lab top and it didn't come with the older printer jack on the computer. I guess I need to use one of the usb ports? My Epson 660 still works I hate the idea of getting a new printer when my old one works.
View 4 Replies View RelatedJust installed Vista SP2. Everything seems to work OK except for my Dell 1720 printer. It now prints an extra page before the actual document to be printed. There are just a few spurious characters printed at the top of this unwanted page. The following "proper" pages are OK. I have, so it seems, the lastest driver available.
View 7 Replies View RelatedI cannot set the default printer in Vista Business with SP1. I am connected to a domain trying to set a network printer hosted from a server as the default printer. I have seen a dozen or more questions similiar to this in this group as well as on other forums and found no answer. I see a MS-MVP come on and tell people to remove local printers such as the XPS and adobe printers. This is a ridiculous solution. Sure it may allow you to connect to a network printer but you have removed printers that you are going to need to use again. Unacceptable.
So far the only other solution that does not include deleting all the local printers off of the machine is to make sure you have write permissions to the default printer registry key. I have checked this and I do have write permissions(Full Control). SO WHAT NEXT? IS MICROSOFT EVER GOING TO COME OUT WITH ANOTHER FIX FOR THIS?
i have installed a printer from my main pc which uses xp pro to my new vista lap top ----- it shows the icon for the printer in the tray but i cannot still print any thing
View 7 Replies View RelatedI just upgraded my XP home edition to Vista home premium with an upgrade disk provided by Dell. Before the upgrade I uninstalled my HP 2575 printer and software because it was listed as a compatibility issue. After upgrade I reinstalled new software from HP for my printer from the HP website. I plugged in the USB cable from my printer. Vista recognized the new device but would not put it in the printer folder in the control panel. Vista did find driver software online but could not install it. The HP solution center tells me no HP devices have been detected. When I try to print I get a message that I don’t have a printer hooked up. That’s the back ground here is what I have done.
I have updated Vista; most were successful some security ones failed. I have Service pack 1 I uninstalled and reinstalled HP software many times I started my spooler and reinstalled printer and software many times. I checked Task Manager and the hpqste08 services are running. I uninstalled virus protection and turned off the firewall. I have done everything I can find at HP, Microsoft and here. I tried to reload Vista but got a Worker Thread Returned at Bad IRQL error message so I stopped reload.
The one odd thing I did find was in the Device Manager. In the Device Manager the HP 2575 is listed twice. Once under IEEE 1284.4 compatible printer and once under Other Devices. When I click on the one under IEEE 1284.4 compatible printer and update driver software it finds the driver and says it’s up to date. When I do the same on the one under Other Devices, windows finds the software for this device but encountered an error when trying to install it. It does this when looking online and when looking in C: drive.The printer still does not show up in the printer folder in the control panel.
I have a Vista Home Premium Laptop, an XP Home laptop and an XP Home desktop (and an XBox 360) connected to my Linksys wireless G router and an XP Home desktop connected via CAT5 to the same router. All connect to the internet fine. The XP laptop finds and uses the printer on the desktop fine. I had setup a share of the Canon I560 printer, connected to my XP desktop, on the Vista laptop and it worked fine. I don't believe I made any changes, but now it won't find the printer and I can't seem to install a new copy.
The Vista machine will not detect the printer and won't even find the XP desktop or laptop on the network. The XP machines find each other fine. All machines get their IP address from the router via DHCP. All are in the same workgroup, or it seems so. Strangely the Vista machine shows WORKGROUP and the XP machines show Workgroup, even if I type the name in caps, XP still shows Workgroup and Vista WORKGROUP.............
I have a Vista Desktop that has a wireless router. I have shared a printer, but I would like my Mac laptop to be able to print to it. Do I install the printer driver on the Mac or on the Vista machine? If I install on the Vista machine, is there a special installer? The printer is an HP DeskJet 2445.
View 4 Replies View RelatedI am hating Vista right now...I bought a computer from Frys and I brougt it home and it connected to the internet just fine. Sometime later it decided to lose sight of the network altogether. I have vista 32bit. My video card is an nVidia nForce Networking Controller. The driver currently on there is nvm60x32.sys. After doing some google searching I have found that I am not the only idiot who decided to try vista out and is having the same problem.
View 9 Replies View RelatedI used to have a Network Icon in the RH Tray, with a blue mark to show the Internet connection was up and running. All of a sudden it showed a red cross, yet the internet connection was still OK. Yesterday the icon disappeared altogether and I can't see how to get it back! It is not one of the hidden icons.
View 7 Replies View RelatedI subscribe to a stationery group within my Vista windows mail. Often they have in their newsgroup post a "message ticker" that runs a message across the status bar like "have a great day". Windows Mail's 'status bar' only displays how many messages I have, how many messages are unread and how many messages not downloaded. How do I get my status bar to display the poster's message ticker when I open their stationery post that is using a message ticker?
View 8 Replies View RelatedI've just had a look at the "update history" section in Vista, and there are numerous updates with a status of "Failed". Can anyone advise on why they have failed, when others have gone in, and also what I can do to correct the situation?
View 4 Replies View RelatedAre you a user of Windows Vista Enterprise or Business edition and would like to know the status of activation of a specific computer? Want to make sure that the computer connected properly to the Key Management Server (KMS) or used your Multiple Activation Key (MAK) properly? Or are you a home user and just want to make sure your computer is fully activated?
Included in Windows Vista is very useful utility that will help you check the status of activation of your computer:
Click on the Start Button and key in CMD and hit Enter to start up Command Prompt....
Is there a way to perform an analysis of the fragmentation level of a drive in Vista Home Premium? I miss being able to see a graphic representation of a disk's fragmentation. Also, previous versions of Windows provided the user a progress bar than informed them of the status of the defrag program when it was running. It appears that Home Premium runs in the background and one never gets a "defragmentation complete" dialog box with options to see a report. I've tried running it manually and not closing the Run dialog box, but it seems to run for hours without any feedback to the user.
View 9 Replies View Relatedi have sony vgn fw-140d ,when I turn on the laptop ,it doesn't want to boot,it is giving me this error 0xc000014c status.I try to go in command prompt but it doesn't let me .Went to a BIOS trying to reinstall Windows again -doesn't work.I got the impression that the hard drive works. Where can be the problem, how can I reformat the hard drive(I can go farther than BIOS)
View 5 Replies View RelatedOn my Acer lapto, vista battery status shows it is 100% charged, but only 30 minutes working time remains. The working mode has been set to 'balanced', but even changing it to 'power save' it only gains a couple of minutes.
I have my laptop for almost a year. Is it normal that the battery practically used up within a year? Or is perhaps something else wrong here? In the beginning it could almost last 3 hours. But with only 30 minutes you can't get any work done.
Before installing Vista, I tought of making a backup on a second internal hard disk which a bought and installed on the original XP professional machine, I found myself to be very smart doing this. Unfortunatly now that Vista is installed on this machine the disk is not accessible. disk manager says "dynamic disk status invalid"? What can/should I do to gain control over this disk again? I can convert it to a standard disk (only option available in disk manager) beause then I will loos the information it contains.
View 6 Replies View Related1. How do I get certain windows in Vista to open to a different size? For example, I want the Uninstall or change a program window to open a little wider so I can see everything on each installed program line.
2. In my "Review your update history " window I have a Canceled status many Failed statuses from over 2 years ago to now. I only want the Successful updates attempts, how do I delete the others?
I use Windows Mail to read news groups only. I have noticed that the status bar of Win Mail not longer shows the number of messages downloaded and the number of messages unread. This only occur in the MS news groups. Other NG's display normally. How can I get the info back in the MS NG's? PS: I hope I explained this properly Windows Vista Ultimate SP2 - 32 Bit
View 5 Replies View RelatedI wanted to return my Status Bar inside Folder to it's default like in this picture but I do not know how and I been searching allot of threads to figure this out: [image:] how to return it to that specific Status Bar? I tried reseting to the default with no luck.
View 7 Replies View RelatedStarted up the computer this morning and everything is enlarged - have tried to change screen resolution and it doesn't change my problem everything just gets distorted. Actual internet page views normally But Task Bar and Task Bar Icons are huge as well as all other bars!
View 4 Replies View Relatedit only has 'task status' on top and 'end task/switch to/new task' on bottom, if i Right Click on the tool bar icon i get 'close/always on top' no other functions. how do i get the old display back, and how'd this happen to begin with i did a restore to an earlier date. the good box came up, but after i deleted the ASUS crap off it this one returned.
View 5 Replies View RelatedI am building a brand new system and bit the bullet and am attempting to install Vista Ultimate 64 with SP1 (Brand Spanking New DVD with SP1 on it). Everything boots up just fine, memory is okay (4 Gb), install runs fine and after the reboot, I get the following: File: Windowssystem32toskrnl.exe
Status: 0xc00000e9
Info: Windows failed to load because the kernel is missing, or corrupt. (I purchased all parts and software from Newegg) When I go to the MS Support site and put in the Product Key, it tells me that it's in an invalid format. 5 - 5 - 5 - etc is what I have, however, Microsoft is wanting 5 - 3 - 5 -etc. format. I have pulled out EVERYTHING and disconnected EVERYTHING except the DVD, HD, and vid card, so I'm running it as barebones as I can.
I recently restarted my computer and the following error message appeared. Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Instert your windows installation disk and resart your computer.
2. Choose your language settings and then click "Next."
3. Click "Repair your computer."
If you don not have this disk, contact your system administrator or computer manufacturer for assistance.
File: BootBcd
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configuration data.
I have followed all the instructions to no avail. I also entered the command eature and attempted to rebulid the bcd but it gives the error message "the requested system device cannot be found." I have a lot information on the hard drive so i would really like to be able to fix it without loosing any of the information.
