IP Address: Manually Changes
May 12, 2009
We have some new Visat pc's added to our network and all of them are showing the same problem. What happens is when the users start the pc's they get a message saying the IP address is in use and they have to go and manually change the address to get working. All the pc's are configured with static ip addresses and have been checked to make sure they are on different addresses. Has anyone got any ideas on what is causing this? I have seen one workaround which involved adding some batch files to the startup routine to swap between static and DHCP but I do not want to go down tis route.
View 7 Replies
ADVERTISEMENT
Mar 29, 2009
Been trying for hours to use Xbox 360 to access music and other files on my compuer, using both Drive address and network address. ALL files can be seen successfully on WMC on the Vista computer but nothing on the Xbox 360 -- except some photos on my son's XP machine (that worked easily).Could really use a simple solution to this please!
View 5 Replies
View Related
Mar 23, 2008
in Window XP, i used to be able to select full address to be displayed in the address bar. But for Window Vista, I could not find the way to do it. e.g. instead of showing D:Document, i want to show \sapsgsmapsnap01document. I want to send the link to my colleague to access directly to destination folder.
View 9 Replies
View Related
May 15, 2008
Whenever i create a new email by click "To" to open up my address book for selecting any email address, or when i use "reply all" and want to add in some more email address from the address book, the computer start to run and till it stuck, so the only choice for me is to end this task and type email address instead of selecting email address from address book.
i thought that this is because i got too many email address, thus i deleted most of it and now only got 700 email address inside my address book, i just can not understand that when outlook express can take more than 3000 email address book, but windows mail can not take about 700 email address book. And somemore, this email address book is just useless for me, because whenever i want to use the address book, the windows mail is going to hang... and the only choice is to go to task manager, end this task and restart my windows mail.
View 9 Replies
View Related
Feb 25, 2009
Need directions to remove a former friend's email address from my address bar. Whenever I create a message to someone with an address starting with the same first letter, his email address also shows up.
View 5 Replies
View Related
Aug 21, 2009
I’ve had problems with my Windows Vista Ultimate computer when attempting to turn on the Guest account. It’s gotten to the point where I cannot create any standard user account. Which leads me to the question: How do you manually create a new user in Vista? (Since it has been failing to create a new user through User Accounts).
View 8 Replies
View Related
Sep 12, 2009
i have a different case. I have a wireless modem that is capable of wl and wired. i am fine with the wl part, but when whenever i just plug in the lan cable, it connects me to the internet without asking for the user name and password. can anybody give me the steps on how to change the settings for me so that the com will request for a password and username before connecting to the internet.
View 9 Replies
View Related
Sep 17, 2009
I am using Smart Defrag 1.20. The thing I would like to know is
1. Is it worth having your hard drive auto defragged?, or,
2. To manually defrag the hard drive, once a week?
As I think that running the auto defrag is using a bit to much in resources?
View 5 Replies
View Related
May 17, 2008
Windows Vista Ultimate. In Windows XP, I used to manually clear Cookies, Temp files and Internet Temp files from the Local Settings (after enabling the file extension views from Tools > Properties > View tab). How can I do this in Windows Vista Ultimate ? I found only Temp folder under Local in the Explorer but not the Cookies folder and Internet Temp folder.
View 5 Replies
View Related
Mar 27, 2007
Since my upgrade to Vista Ultimate (RC1 build 5600) from XP, I haven't been able to manually dim the screen on my laptop. In XP, I could hold the Fn button, and hit F5 to dim, or hit F6 to brighten the screen. This doesn't work on Vista. I have a Vaio FE770G notebook, 1gb ram, 128mb graphics card.
View 5 Replies
View Related
Sep 24, 2009
My computer (Vista 32 SP2) freezes and I turn it off manually and start again and all is OK for a while. It seems to freeze at any time even when I am not doing anything. This has been happening for 8-9 months but the problem went away in winter so I seem to think this might be the fan. I have done a clean boot and still it happens. I have uninstalled Vista and reinstalled and still the same so it is not any programs that I might have. As summer is not far away (Australia) I would like to fix this problem as it has started to happen again. I have taken the unit to Acer but they seem to think it's OK they said it was a memory conflict but that is not the case. What else can I do?
View 4 Replies
View Related
Aug 6, 2008
It seems I have hit a wall on my particular CPU. I can easily get it dead stable at 3.2 GHz, with the RAM running at 1066 (rated specs) and manually adjusting the timings to 5-5-5-18, also spec. But if i start going any higher the system starts getting quirky - particularly when I resume from standby - it goes south with a BSOD. Gunter, I know you wanted pics, but let's keep it all consolidated in here and start keep it to a relative few people.
View 9 Replies
View Related
May 31, 2009
I have a home-built computer running Vista Home Premium x64. Curious problem. I can put the computer to sleep from from the shut-down menu manually--i.e., where you see "restart," "shut down," "sleep," etc. with no problem. But for some reason from my power plan option, which I set at control panel, it won't go into sleep automatically. The monitor will shut off, but everything else--hard drive, fan, etc.--keeps going.
View 5 Replies
View Related
Jun 22, 2008
Using WinXP, you could go to File Types tab and modify them manually. The tab is missing in Vista. Problem: In XP, I had my sound recorder associated with my .wav files. I modified the properties of the file extension so it would open, play the sound, the close. In Vista, I can't seem to be able to edit the Open or the Play aspect. How can I do this in Vista. Please don't ask me why...we all have our own personal reasons for doing what we do...I just want to be able to do it in Vista...if it's possible.
View 8 Replies
View Related
May 14, 2008
I have a problem since a month before SP1 came out. I never installed the beta. I have Vista Ultimate 64bits all updates done. When i shutdown my computer turn off correctly. Then within 10 to 60 second the computer turn on. First time i thought i hit restart or hibernate by mistake. I never use these 2 usually because hibernate scrap a hardisk and restart never sure memory cleared (i'm a programmer so i play with memory alot) so i prefer shutdown and power back manually.
So i tough next that Wake on Lan was my problem. I check by bios and it's fine it's off. I updated my bios and same result the problem still there. I searched the net without any result. What's weird is if i shutdown my computer and when i saw it power back on i hold right away my power button so it shutdown before windows even think of starting it turn off and never ever power back on by itself..............
View 7 Replies
View Related
Mar 23, 2008
I continue to have a problem with Defender on my computer. Have auto scans set for daily and even if I manually scan, within 30 minutes I get the yellow exclamation mark that it has been 'blank' days since I scanned and need to do so!!
View 5 Replies
View Related
Oct 15, 2009
vista starting without explorer.exe, so have to run explorer.exe manually from the task manager to get start menu and everything running normally.... I am not sure of the right category, because this may be is related to virus, driver and system restore issues, please move in the right section, following is the system configuration and the history: also sorry for the long message, but I am really stuck here and if you could spare some time to look into this issue, I tried to provide as much history and details on the issue not just to help you understand my problem but also as a warning for other users who may run into this issue in the future.. it may be a known issue and I just happen to run into it still I would like to provide details and history of what happened, if you help me I will be in your dept for sure!! and you may ask my help anytime if you need something System configuration: my friend has a toshiba satellite latop, with vista premuim. it can preloaded on the laptop. I am not sure of the exact system model and processor but if it's relevant I can provide that info, but I suspect there is some ASUS components/drivers in the system, later I will explain why I think so, as I said I can provide system model or CPU or hardisk space but at this point I feel it's not relivant, cause it's an issue with explorer.exe right now but if you think it's required I will ask for that info, please understand I am giving support over seas from this user but we are in touch via msn and phone so if you want any additional info, even screen shots I will try to provide. History: the Problem started when she called me, and showed me a screen shot of AVG anti-virus free edition trying to remove some virususes off her computer. she said the virus came from a USB driver she borrowed from a friend. and AVG was complaining that it is not able to remove the virus because she has to buy the full AVG version. this sounded wierd, I tried to verify she is using the free AVG but I am not sure, so I ask her to uninstall AVG and try another anti-virus, first thing came to mind is avast, so I asked her to install the latest free version I think it's 4.8, but it turns out it's not compatabile with vista or her system and after some searching on the net I discover a known issue with avast/vista conflicting with some asus drivers and I suspect it is the same case, because she is also like the others reported, getting a blank screen and not able to logon. but before uninstalling avast from safe mode, I tried another suggestion ( I was not aware that avast was responsible at that point in time yet ) so I suggested she try last known good configuration. did that, but still she got blank screen again ( because avast was still there ) so I suggested she go to safe mode and try to uninstall avast ( this is after I found the issue with avast conflicing with asus drivers on some machines with vista ), after going into safe mode, she gets a view of her documents and no start button, after some questions on the phone I figured out that explorer.exe is not running, so asked her to try to run explorer.exe from the task manager, when she did that she got the start button, and was able to goto control panel and uninstall avast and then she rebooted vista. after reboot she was able to go into vista, but explorer.exe again won't run, unless she goto task manager and run it manualy everytime she reboots. I thought I'd do some research why is explorer.exe not running when the system is restarting, I thought maybe I could add it to the system startup or something, but not sure where would be the best place do to that, msconfig? or startup folder for that user? if someone can give me some advice that would be great. she already backed up her files now and ready for a re-format but I am really embarased would like to find a solution to this problem anyway, as now she think I might be an idiot for my poor selection of antivurs software, It's strange I never heard of this compatability issues and I installed avast on vista on other toshiba latops and many systems and I never had this issue ever, I suggested she try another anti-virus but she is afraid now and wants to re-format... and take her time which I understand, but in the mean time I want to try and fix this explorer.exe not runing.
View 4 Replies
View Related
May 3, 2010
We tried to restart the computer manually, but to no avail. Vista loaded Windows, but before prompting me with a login screen, it dumbed again. We then tried to boot it in safe mode. Everything works fine there, so we tried to reboot normally again. Another dumb. We tried yet again, after removing the disc. Nothing. Since then we've tried system recovery to set it back a few days, we've tried to let it repair itself, we've tried to unplug everything (everything - mouse, keyboard, sound - everything but the monitor). The monitor, by the way, have some weird lines running down the screen, which notably aren't there when booting in safe mode.
The error code that appears on the dumb is as follows: STOP: 0x000000050 (0x8F875370,0x00000001,0x8EB5AB0A,0x00000000)
View 9 Replies
View Related
Oct 16, 2008
Excessive memory and cpu use when loading ‘heavy’ internetsites like runescape, stardoll, etc (my children are experiencing most of the problem…). Event viewer indicates ‘excessive page swapping’ and I tried to extend the swap memory size manually, this did not help either. It does not matter which browser is in use (tries IEXPL en FIREFOX). JAVA runs with the latest edition. No memory problems found with memory scan...,System is defragmented on a regular base,No malware found,Tried to start up without virusscan (sophos),Problem started a couple of weeks ago, system run normal before Memory use running heavy java appr 200MB ,Memory use homepage only 2 MB,PC performance index 3. MSINFO.exeinfo: 1G installed; 767 total phys mem; 116 available I wonder why there is only 116 MB physical memory available What causes the degradation: 1GB -> installed memory to 767MB total physical memory -> 116MB available memory? (and this is just after start up, no browsre loaded) Number and 'weight' and weight of boot programs is very low.
View 5 Replies
View Related
Aug 9, 2009
I only use Windows Mail to handle my MS newsgroups (it does an excellent job of this). I have now subscribed to 10 newsgroups, and am finding it harder to find the few I usually go to, compared to the ones that I only go to once or twice, whenever I have a rare question. Is there a way I can manually change the order in which they appear (in the left pane--I see "Local Folders" and "Microsoft Communities" as the two major sections)? It looks like Windows Main arranges them in alphabetical order. Is there any way I can drag-n-drop, or change them in any other way?
View 8 Replies
View Related
Jan 27, 2010
I want to manually install Vista Service Pack 2 32 bit. My installation disk is Vista Basic with SP1. Is the only prerequisite to install SP2 is to have Vista Service Pack 1 installed?
View 6 Replies
View Related
Mar 23, 2008
I'm having trouble enabling AHCI under Windows Vista Business x64. I initially installed the OS with AHCI enabled in the BIOS, but I receive stop code 7B upon reboot. The only way to get the OS to boot is to disable AHCI in the BIOS. The last time I installed the OS, I was able to apply a registry patch and manually copy IaStor.sys (from the Intel Matrix Storage Manager driver) into the WindowsSystem32drivers folder. This would allow me to boot and run the system with AHCI enabled, and utilize the Intel Turbo Memory flash cache module I installed. I also made sure that Msahci.sys was set to start on boot as per the instructions at
Now, for some reason, this procedure no longer works. I still receive stop code 7B upon reboot. (Note that I am not able to install the Intel Matrix Storage Manager driver or the Intel Turbo Memory driver until after AHCI is working. Attempting to do so results in an error message that my system "does not meet the minimum requirements".)I'm trying this on a Dell Vostro 1500 with a PM965 chipset and ICH8 I/O controller hub. This is the contents of the registry file I'm using:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESYSTEMControlSet001ControlCriticalDeviceDatabasePCIVEN_8086&DEV_2922&CC_0106]"Service"="iaStor""ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesiaStor]"Type"=dword:00000001"Start"=dword:00000000"Group"="SCSI miniport" "ErrorControl"=dword:00000001"ImagePath"="system32\drivers\IaStor.sys""tag"=dword:00000019"DisplayName"="Intel AHCI Controller"
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesiaStorParameters]"queuePriorityEnable"=dword:00000000HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesiaStorEnum]"0"="PCI\VEN_8086&DEV_2922&SUBSYS_B0051458&REV_02\3&13c0b0c5&0&FA""Count"=dword:00000001 "NextInstance"=dword:00000001
View 7 Replies
View Related
Mar 9, 2009
all of a sudden my windows firewall has gone off and I cannot put it back on manually or auto. I have scanned my system with 3 virus programs and spyware programs and all is clear. I do not have any Norton software on my pc but the only thing I have done recently is put a new netgear wireless router on my system. running vista home premium all up to date
View 8 Replies
View Related
Feb 10, 2009
when i was backing up...manually. i saw that move was slower than copy. it sound funny but yes,, that true. is it normal. can u tell me ur ideas? on why
View 4 Replies
View Related
Jun 3, 2008
Windows Update has not yet installed SP1 on my Vista Home Premium system. Should I install it manually?
View 9 Replies
View Related
Mar 23, 2008
I have 2 user accounts on my pc, both running WinMail with identical options set on both. They are set to check for emails every 5 minutes and at startup. One works fine on both options. The other will not automatically retrieve emails every 5 minutes. It does retrieve when it is started or when manually receive emails is initiated. Every 5 minutes, I hear the tone that is set, but it will not retrieve the email.
View 6 Replies
View Related
Mar 23, 2008
I have a Vista laptop with Home Basic. My other 3 XP laptops can connect to my wireless network ok. I use a Vigor 2600 with firmware v1.06.7.04.2 with wpa/psk 64 bit, mac enabled and hidden ssid. On my Vista laptop from the control panel, network & sharing centre, if i select connect to a network, the following shows; Unamed network - security enabled (there are no other networks round about me). If I select"manage networks" I can see my own named network. I cannot conect to this unless i remove my encrtptionand as numerous forums have reported Vista does not offer PSK when manually configuring a wireless network.
View 4 Replies
View Related
Mar 4, 2010
I have a windows Vista machine at home and I got one of those viruses that imitate the MS virus scanning tool. I logged off my acct and ran the malware tool I have and the virus scanner and cleaned everything up. But when I logged back into my user acct I could not open any icons or run any programs it seems that they are not recognizing the .exe files as valid. I get the error saying there is no program associated with this shortcut. But even when I try to run it manually it doesn't work. I can go into my other user acct and run all the programs fine. So my question is if I can't fix my user acct what do I need to do to create a new one but duplicate what I have now? I'm especially concerned about my email files, contacts etc. I can easily move my important personal files over I'm just really concerned about the mail and other programs I run now. Let me know if you need more info. BTW I do not have a valid restore point to work with. I have since created one in case I mess something else up while I try to fix this problem.
View 7 Replies
View Related
Jun 29, 2009
Vista Home premium, SP2. HP Pavilion Notebook. Have to run in -SAFE mode with networking- for next week till new hard drive arrives.
I will then install it as my computer will not boot in normal mode. HP Warranty is replacing hard drive.
But as an aside, I can access my hard drive and copy files to my external HDD.
In the meantime, I wish to use the Internet to access audio via HULU or other sites.
How can I manually access my audio while in safe mode?
View 9 Replies
View Related
Apr 20, 2009
We have a network of 5 vista machines, 3 xp machine, 7 voip phone and 1 network printer. The internet of all 3 windows xp machine keeps on dropping once everyday, removing the ethernet cable and putting the cable back doesn't help it, restarting the system doesn't help it, refreshing the ip doesn't, restarting the router either, the only way I found to give them internet again is to manually set the ip and dns configuration daily.
View 6 Replies
View Related
May 3, 2008
I have a need to install 4 systems of Vista on a single machine (4 partitions of my main system hard disk). Given that Vista always seems to see its own system drive as C, would it be possible to create my "master image" with SP1, all my drivers, utilities, system tweaks, and other "generic" applications (like Office/Acrobat etc), and then just clone this drive across to all the partitions I need to set up (on D, E, and F). Then, using VistaBootPRO, I could edit the BCD to include all the other partitions. Can anyone think of a reason this would not work?
View 9 Replies
View Related
