Installed Os Registry Patch Manually Copy
Mar 23, 2008
I'm having trouble enabling AHCI under Windows Vista Business x64. I initially installed the OS with AHCI enabled in the BIOS, but I receive stop code 7B upon reboot. The only way to get the OS to boot is to disable AHCI in the BIOS. The last time I installed the OS, I was able to apply a registry patch and manually copy IaStor.sys (from the Intel Matrix Storage Manager driver) into the WindowsSystem32drivers folder. This would allow me to boot and run the system with AHCI enabled, and utilize the Intel Turbo Memory flash cache module I installed. I also made sure that Msahci.sys was set to start on boot as per the instructions at
Now, for some reason, this procedure no longer works. I still receive stop code 7B upon reboot. (Note that I am not able to install the Intel Matrix Storage Manager driver or the Intel Turbo Memory driver until after AHCI is working. Attempting to do so results in an error message that my system "does not meet the minimum requirements".)I'm trying this on a Dell Vostro 1500 with a PM965 chipset and ICH8 I/O controller hub. This is the contents of the registry file I'm using:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESYSTEMControlSet001ControlCriticalDeviceDatabasePCIVEN_8086&DEV_2922&CC_0106]"Service"="iaStor""ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesiaStor]"Type"=dword:00000001"Start"=dword:00000000"Group"="SCSI miniport" "ErrorControl"=dword:00000001"ImagePath"="system32\drivers\IaStor.sys""tag"=dword:00000019"DisplayName"="Intel AHCI Controller"
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesiaStorParameters]"queuePriorityEnable"=dword:00000000HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesiaStorEnum]"0"="PCI\VEN_8086&DEV_2922&SUBSYS_B0051458&REV_02\3&13c0b0c5&0&FA""Count"=dword:00000001 "NextInstance"=dword:00000001
View 7 Replies
ADVERTISEMENT
Mar 23, 2008
Post in reply to: Registry-Patch. should work on all Vistas ( same type of registry). Re-Boot after patching... If you have a prob with this, just to a System Restore
View 9 Replies
View Related
Feb 10, 2009
when i was backing up...manually. i saw that move was slower than copy. it sound funny but yes,, that true. is it normal. can u tell me ur ideas? on why
View 4 Replies
View Related
May 14, 2009
im useing Windows vista home premium 32bit. i was wandering if their was a way to edit the registry or use a Command Prompt Phrase to manually enable the sound drives? the reason that im in safe mode is just because O.o well, i got more access too things, and yes Normal mode works PERFECTLY so dont ask
View 9 Replies
View Related
Feb 27, 2009
WARNING: only for advanced users who like to clean the registry. Quicksys regcleaner normally $25 free - only 4hrs left from here: http://www.giveawayoftheday.com/
Win 7 compatible - have used this and deleted all 1200 entries it found. It makes a backup - been running for several hours and reboots with no probs. Also working fine so far on my Vista x64 and Win 7 x86 installs. After cleaning you need to shut the app. and reopen it for it to find it's backups. (Easy to find them by hand - it can compress them to.7z files, too ). Have used their regdefrag a lot - identical scans and results to the Auslogics and Glary versions- so use whichever defragger you already have. WARNING: not recommended to defrag registry across drives.
View 9 Replies
View Related
May 27, 2009
Currently using Vista 64 Home Premimum. Can anyone recommend a good registry cleaner? I tried PCTOOLS and it promptly wrecked my registry.
View 9 Replies
View Related
Nov 13, 2009
I am using this program to clean up my registry and it seems to work fine except the errors keep coming back. I can do a scan, clean up all the errors and then shut down and start up and I have a new 20 registry error list and most or all of the errors relate to "bad path for the value" and its windows files that seem to be at fault. I don't understand why Microsoft operating system would create registry errors on a startup, before anything has been installed etc. is RegistryBooster misleading me or what. I am running win7 but it did the same thing on vista home premium so I think the question is valid for this group.
View 7 Replies
View Related
Dec 10, 2007
I can install CoH from my DVD no problem. The game works. When I try to patch it, the game becomes corrupt. I can get patch 1.40 to install, after that it is a no go. I am completely frustrated. I must be having a hardware conflict or a corrupt install disc. I do a selective startup with only Windows services running. Each an every time I get this error message involving this file "ww2data.sga" and this code: Error 10104. Anyone else on Vista 64 experiencing this problem? This is the first real SNAFU I have encountered with 64. Sucks, especially when it is a "Games For Windows" game. RelicNews Forums - Can't Patch beyond 1.4 in CoH w/ Vista 64
View 4 Replies
View Related
Aug 24, 2008
After installing the patch the singleplayer is fine but it seems multiplayer is broken. If I start a server it loads the map but locks up straight away, also looks as though it's missing textures(random black spots) It even crashes from menus if I try and change my character as its also missing textures (all black) Ive tried uninstalling, reinstalling etc. Latest Catalyst drivers, card is a 4870. Running as admin, compatability mode etc make no difference, weird as it works fine with no patch, unfortuantely all the servers require 1.42.
View 4 Replies
View Related
Feb 8, 2009
The digital signature issue has been fixed and certified by Microsoft so you no longer have to set you clock back to play Gears of War for Windows. You can get it right now. This update fixes an expired digital signatures issue that prevents all earlier versions of the game from launching. This is a required update. download and install the update before launching the game. This update incorporates all previous updates and bug fixes for Gears of War for Windows, where applicable.
View 9 Replies
View Related
Dec 8, 2009
I scan my computer at microsoft update site for the usuall monthly updates but I don't get any result now , so where are they?
View 6 Replies
View Related
Jul 19, 2008
Is there any patch to play PES2008 in 1440x900 screen resolution available for vista x64? I downloaded one but when I try to configure settings using it, It say "your video card is low". I think this one is for x86s.
View 6 Replies
View Related
Jul 20, 2008
i just bought a new computer and it has vista 64bit operating system. now im not entirely sure if its the operating system thats giving me this drama but i will explain. i installed wc3 and tft all fine both in C:Program Files (x86)Warcraft III
the games work fine. i downloaded the full 1.22a patch from 1.00 to 1.22a and i cant install as it says when i click on the installer. ERROR: unable to create file 'C:Program Files (x86)Warcraft IIIBNUpdate.exe' Access is denied.............
View 6 Replies
View Related
Mar 24, 2009
Can anybody recommend a good but simple software program? I want to copy a dvd that contains pictures from a camcorder.
View 9 Replies
View Related
Mar 23, 2008
I am trying to copy files from my usb hard drive: K: to my network external drive Z:
I am trying to copy everything from one to another (files in folders and files that are not in folders)
I tried selecting all and then send to Z:, but it took about six hours to copy about 20 gig (I have about 180 gig to copy)
I read some where that robocopy is a faster and better way to copy files.The thing is I do not know what syntax to use. I was wondering if someone could tell me the syntax I should use to copy EVERYTHING from the usb driveK: to the network drive Z:
View 9 Replies
View Related
Apr 9, 2008
I have a new system that has been working flawlessly til this patch. vista64 home premium, and the offending device is a microsoft usb wheelmouse optical.Now when ever I reboot it says new hardware found and driver instillation failed. I downloaded and installed intellipoint 6.1 for 64bit. and device manager shows no conflict and if i just clear out of the error boxes it works fine. Just everytime I reboot it does same thing again. It in fact, it cannot even recognize the device it is trying to install drivers for which is why i think it fails the driver update on reboot. I found out the hard way by telling vista to ignore the problem and it promptly disconnected the mouse altogether. I tried restoring to a point before the patch but it did not fix
the problem. One of the patches warned that it cannot be removed , so my guess is that is what is causing the problem.
View 9 Replies
View Related
Dec 20, 2008
"The virus came unexpectedly. I thought my defenses were good enough, but clearly I was unprepared. This virus has proved to be unusually tenacious. I can't seem to clear it out. As soon as I see progress, the bug reemerges and attacks my system. The point: Exploits happen. Merry Christmas and be glad it's not Happy New Year. Security exploits or attacks are now commonplace during the holidays. Somebody should be grateful that Microsoft got to this one early. If this is the only big security problem during the holidays, your IT organization got off easy.
Still, for many IT organizations and even consumers, today's out-of-band Internet Explorer patch is late enough to be trouble. Who wants to be distributing patches during the annual holiday party (assuming your company has one and it's no wake for those employees surviving layoffs)? For some consumers, that patch didn't come soon enough; they've been exploited already...........
View 6 Replies
View Related
Nov 17, 2008
Is there a patch for running 16 Bit Software on a windows vista 64 OS. The error message I am getting states: "The version of this files is not compatible wiith the version of windows you're running." My second question: How do you check your system information to see whether you need an x86 (32-bit) or X64 (64-bit) version of the program?
View 6 Replies
View Related
Jun 14, 2009
I recently install a game onto my computer. Installation was completed smoothly, but without fail, I get a blue screen of death in the middle of a patch download. The info is as follows.
BCCode: a
BCP1: 0000000000000008
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF800022091CA
OS Version: 6_0_6001
Service Pack: 1_0
Product: 768_1
Is there anyone out there with a blue screen dictionary who can help me resolve this irritation?
View 5 Replies
View Related
May 4, 2008
I have windows vista premium home edition and am trying to install the update 8.0 for AVG antivirus....... it is telling me my windows vista operating system is not fully up to date and tghe KB929547 vista patch is not present. it says to exit and install the patch first and showsWindows Vista 32bit Windows Vista 64 bit where do I look to see if I would be 32 or 64?? I don't think I have either, am I right?
View 4 Replies
View Related
Aug 18, 2008
With my Messenger, I like to patch it with Mess patch so it gets rid of adds and annoying buttons. And I've noticed on the latest patch for messenger 8.5, even though I tell it to remove the bottom advert banner, It won't...Is anyone else having this issue?
View 8 Replies
View Related
Oct 17, 2009
I found this interesting. It seems those of us who have the .NET framework add-on installed in Firefox will have trouble with this Windows Update. It's listed on my Updates as a security update for IE8- KB974455
View 9 Replies
View Related
May 12, 2009
We have some new Visat pc's added to our network and all of them are showing the same problem. What happens is when the users start the pc's they get a message saying the IP address is in use and they have to go and manually change the address to get working. All the pc's are configured with static ip addresses and have been checked to make sure they are on different addresses. Has anyone got any ideas on what is causing this? I have seen one workaround which involved adding some batch files to the startup routine to swap between static and DHCP but I do not want to go down tis route.
View 7 Replies
View Related
May 1, 2008
My old Windows XP PC died months ago (motherboard problems) and so I took out the hard drive (which still functions fine) and put it in my new PC, but I can't seem to copy any of my files in the My Documents folder from the old drive to my newer larger drive. I've had this drive in here for the last several months and have had no problems writing other files to this 'older' drive (250 gig Maxtor 16mb cache, 7,200RPM drive (btw it's only a year old), but when I try to copy files to another drive I get the following error message: "You'll need to provide administrator permission to copy to this file." This only happens with files that are in the My Documents folder. My current login has administrator rights, so I'm thinking some how this has something to do with this drive being from a different computer's installation of XP.
View 6 Replies
View Related
Aug 21, 2009
I’ve had problems with my Windows Vista Ultimate computer when attempting to turn on the Guest account. It’s gotten to the point where I cannot create any standard user account. Which leads me to the question: How do you manually create a new user in Vista? (Since it has been failing to create a new user through User Accounts).
View 8 Replies
View Related
Sep 12, 2009
i have a different case. I have a wireless modem that is capable of wl and wired. i am fine with the wl part, but when whenever i just plug in the lan cable, it connects me to the internet without asking for the user name and password. can anybody give me the steps on how to change the settings for me so that the com will request for a password and username before connecting to the internet.
View 9 Replies
View Related
Sep 17, 2009
I am using Smart Defrag 1.20. The thing I would like to know is
1. Is it worth having your hard drive auto defragged?, or,
2. To manually defrag the hard drive, once a week?
As I think that running the auto defrag is using a bit to much in resources?
View 5 Replies
View Related
May 17, 2008
Windows Vista Ultimate. In Windows XP, I used to manually clear Cookies, Temp files and Internet Temp files from the Local Settings (after enabling the file extension views from Tools > Properties > View tab). How can I do this in Windows Vista Ultimate ? I found only Temp folder under Local in the Explorer but not the Cookies folder and Internet Temp folder.
View 5 Replies
View Related
Mar 27, 2007
Since my upgrade to Vista Ultimate (RC1 build 5600) from XP, I haven't been able to manually dim the screen on my laptop. In XP, I could hold the Fn button, and hit F5 to dim, or hit F6 to brighten the screen. This doesn't work on Vista. I have a Vaio FE770G notebook, 1gb ram, 128mb graphics card.
View 5 Replies
View Related
Sep 24, 2009
My computer (Vista 32 SP2) freezes and I turn it off manually and start again and all is OK for a while. It seems to freeze at any time even when I am not doing anything. This has been happening for 8-9 months but the problem went away in winter so I seem to think this might be the fan. I have done a clean boot and still it happens. I have uninstalled Vista and reinstalled and still the same so it is not any programs that I might have. As summer is not far away (Australia) I would like to fix this problem as it has started to happen again. I have taken the unit to Acer but they seem to think it's OK they said it was a memory conflict but that is not the case. What else can I do?
View 4 Replies
View Related
Aug 6, 2008
It seems I have hit a wall on my particular CPU. I can easily get it dead stable at 3.2 GHz, with the RAM running at 1066 (rated specs) and manually adjusting the timings to 5-5-5-18, also spec. But if i start going any higher the system starts getting quirky - particularly when I resume from standby - it goes south with a BSOD. Gunter, I know you wanted pics, but let's keep it all consolidated in here and start keep it to a relative few people.
View 9 Replies
View Related
