Mouse Not Recognized After Reboot Following The 04/08 Patch
Apr 9, 2008
I have a new system that has been working flawlessly til this patch. vista64 home premium, and the offending device is a microsoft usb wheelmouse optical.Now when ever I reboot it says new hardware found and driver instillation failed. I downloaded and installed intellipoint 6.1 for 64bit. and device manager shows no conflict and if i just clear out of the error boxes it works fine. Just everytime I reboot it does same thing again. It in fact, it cannot even recognize the device it is trying to install drivers for which is why i think it fails the driver update on reboot. I found out the hard way by telling vista to ignore the problem and it promptly disconnected the mouse altogether. I tried restoring to a point before the patch but it did not fix
the problem. One of the patches warned that it cannot be removed , so my guess is that is what is causing the problem.
View 9 Replies
ADVERTISEMENT
Dec 25, 2009
I note that a common subject here is the problem of USB wireless mice not being recognized by computers. For what it's worth the following is my experience. This evening my 3 year old Logitech wireless mouse just stopped working, abruptly, and I started getting repeated messages of an unknown USB device even with nothing attached. I tried the mouse on two other computers...it worked fine. I tried a system restore from yesterday with no results. I followed the advice offered on other threads to delete USB ports and reboot...no go. Still weird behavior. I noted that one person with a similar problem turned off notebook and removed and reinstalled battery...whalla! It works. The mouse now functions and no more strange messages. I have Vista Home Premium 64 bit on a Sony Vaio notebook.
View 1 Replies
View Related
Nov 10, 2008
I have a micro innovation wireless mouse and kb, after a reboot I have to unplug the usb plug then plug it back in to get the mouse and kb to work
View 9 Replies
View Related
Dec 10, 2007
I can install CoH from my DVD no problem. The game works. When I try to patch it, the game becomes corrupt. I can get patch 1.40 to install, after that it is a no go. I am completely frustrated. I must be having a hardware conflict or a corrupt install disc. I do a selective startup with only Windows services running. Each an every time I get this error message involving this file "ww2data.sga" and this code: Error 10104. Anyone else on Vista 64 experiencing this problem? This is the first real SNAFU I have encountered with 64. Sucks, especially when it is a "Games For Windows" game. RelicNews Forums - Can't Patch beyond 1.4 in CoH w/ Vista 64
View 4 Replies
View Related
Aug 24, 2008
After installing the patch the singleplayer is fine but it seems multiplayer is broken. If I start a server it loads the map but locks up straight away, also looks as though it's missing textures(random black spots) It even crashes from menus if I try and change my character as its also missing textures (all black) Ive tried uninstalling, reinstalling etc. Latest Catalyst drivers, card is a 4870. Running as admin, compatability mode etc make no difference, weird as it works fine with no patch, unfortuantely all the servers require 1.42.
View 4 Replies
View Related
Feb 8, 2009
The digital signature issue has been fixed and certified by Microsoft so you no longer have to set you clock back to play Gears of War for Windows. You can get it right now. This update fixes an expired digital signatures issue that prevents all earlier versions of the game from launching. This is a required update. download and install the update before launching the game. This update incorporates all previous updates and bug fixes for Gears of War for Windows, where applicable.
View 9 Replies
View Related
Dec 8, 2009
I scan my computer at microsoft update site for the usuall monthly updates but I don't get any result now , so where are they?
View 6 Replies
View Related
Jul 19, 2008
Is there any patch to play PES2008 in 1440x900 screen resolution available for vista x64? I downloaded one but when I try to configure settings using it, It say "your video card is low". I think this one is for x86s.
View 6 Replies
View Related
Jul 20, 2008
i just bought a new computer and it has vista 64bit operating system. now im not entirely sure if its the operating system thats giving me this drama but i will explain. i installed wc3 and tft all fine both in C:Program Files (x86)Warcraft III
the games work fine. i downloaded the full 1.22a patch from 1.00 to 1.22a and i cant install as it says when i click on the installer. ERROR: unable to create file 'C:Program Files (x86)Warcraft IIIBNUpdate.exe' Access is denied.............
View 6 Replies
View Related
May 28, 2009
I have an old Logitech but fully functional mouse (cordless optical).
When I ran Vista x86 Ultimate, I installed a small program that allowed me to double-click with middle mouse button. Now, with Vista x64 Ultimate, it doesn't work anymore.
Do someone know another small program to allow me that?
View 9 Replies
View Related
Dec 20, 2008
"The virus came unexpectedly. I thought my defenses were good enough, but clearly I was unprepared. This virus has proved to be unusually tenacious. I can't seem to clear it out. As soon as I see progress, the bug reemerges and attacks my system. The point: Exploits happen. Merry Christmas and be glad it's not Happy New Year. Security exploits or attacks are now commonplace during the holidays. Somebody should be grateful that Microsoft got to this one early. If this is the only big security problem during the holidays, your IT organization got off easy.
Still, for many IT organizations and even consumers, today's out-of-band Internet Explorer patch is late enough to be trouble. Who wants to be distributing patches during the annual holiday party (assuming your company has one and it's no wake for those employees surviving layoffs)? For some consumers, that patch didn't come soon enough; they've been exploited already...........
View 6 Replies
View Related
Nov 17, 2008
Is there a patch for running 16 Bit Software on a windows vista 64 OS. The error message I am getting states: "The version of this files is not compatible wiith the version of windows you're running." My second question: How do you check your system information to see whether you need an x86 (32-bit) or X64 (64-bit) version of the program?
View 6 Replies
View Related
Jun 14, 2009
I recently install a game onto my computer. Installation was completed smoothly, but without fail, I get a blue screen of death in the middle of a patch download. The info is as follows.
BCCode: a
BCP1: 0000000000000008
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF800022091CA
OS Version: 6_0_6001
Service Pack: 1_0
Product: 768_1
Is there anyone out there with a blue screen dictionary who can help me resolve this irritation?
View 5 Replies
View Related
May 4, 2008
I have windows vista premium home edition and am trying to install the update 8.0 for AVG antivirus....... it is telling me my windows vista operating system is not fully up to date and tghe KB929547 vista patch is not present. it says to exit and install the patch first and showsWindows Vista 32bit Windows Vista 64 bit where do I look to see if I would be 32 or 64?? I don't think I have either, am I right?
View 4 Replies
View Related
Mar 23, 2008
Post in reply to: Registry-Patch. should work on all Vistas ( same type of registry). Re-Boot after patching... If you have a prob with this, just to a System Restore
View 9 Replies
View Related
Aug 18, 2008
With my Messenger, I like to patch it with Mess patch so it gets rid of adds and annoying buttons. And I've noticed on the latest patch for messenger 8.5, even though I tell it to remove the bottom advert banner, It won't...Is anyone else having this issue?
View 8 Replies
View Related
Mar 23, 2008
I'm having trouble enabling AHCI under Windows Vista Business x64. I initially installed the OS with AHCI enabled in the BIOS, but I receive stop code 7B upon reboot. The only way to get the OS to boot is to disable AHCI in the BIOS. The last time I installed the OS, I was able to apply a registry patch and manually copy IaStor.sys (from the Intel Matrix Storage Manager driver) into the WindowsSystem32drivers folder. This would allow me to boot and run the system with AHCI enabled, and utilize the Intel Turbo Memory flash cache module I installed. I also made sure that Msahci.sys was set to start on boot as per the instructions at
Now, for some reason, this procedure no longer works. I still receive stop code 7B upon reboot. (Note that I am not able to install the Intel Matrix Storage Manager driver or the Intel Turbo Memory driver until after AHCI is working. Attempting to do so results in an error message that my system "does not meet the minimum requirements".)I'm trying this on a Dell Vostro 1500 with a PM965 chipset and ICH8 I/O controller hub. This is the contents of the registry file I'm using:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESYSTEMControlSet001ControlCriticalDeviceDatabasePCIVEN_8086&DEV_2922&CC_0106]"Service"="iaStor""ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesiaStor]"Type"=dword:00000001"Start"=dword:00000000"Group"="SCSI miniport" "ErrorControl"=dword:00000001"ImagePath"="system32\drivers\IaStor.sys""tag"=dword:00000019"DisplayName"="Intel AHCI Controller"
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesiaStorParameters]"queuePriorityEnable"=dword:00000000HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesiaStorEnum]"0"="PCI\VEN_8086&DEV_2922&SUBSYS_B0051458&REV_02\3&13c0b0c5&0&FA""Count"=dword:00000001 "NextInstance"=dword:00000001
View 7 Replies
View Related
Oct 17, 2009
I found this interesting. It seems those of us who have the .NET framework add-on installed in Firefox will have trouble with this Windows Update. It's listed on my Updates as a security update for IE8- KB974455
View 9 Replies
View Related
Jul 5, 2008
I have the following issue and hope that somebody can give me a hint about what might be going on! My system has two raid 1 arrays - one is running on XP Professional SP3 the other one is running on Vista x64 Ultimate SP1. When I start my virtual machines (either from the Virtual PC console or when double-clicking the *.vmc files) than everything is working fine on XP and the virtual machines are booting and running as expected. However, on Vista the following is happening (and I hope somebody has an idea):
1. Starting the Virtual machines from the console leads to an immediate reboot of my host machine (I can't even see any boot screen of the virtual machine - it is like clicking start in the VPC console -- > reboot of host).
Now I tried the following:.........
View 9 Replies
View Related
Aug 29, 2009
I downloaded it, but now can't figure out why I stay alll night long trying to find my essay i wrote yesterday, is all filled with random hexadecimals and Email says I need a critical patch in order to undelete 1300+ message that I had until yesterday, hello? And why wired LAN is defeated???? I hate wireless, it increases brain csancer risk & headaches, but wired is dead, why?
View 9 Replies
View Related
Apr 28, 2009
I can't get my laptop to recognize my dvd burner. I read earlier threads about deleting the upper and lower filters in the registry but, I can't find those filters in the registry file. What am I doing wrong?
running Vista Ultimate 64 w/ SP1
HP Pavillion DV-6768se
4 gigs ram
AMD Turion 64 X2 2.0 GHZ
View 9 Replies
View Related
May 12, 2009
I had internet for a whole day when all of a sudden my connection was gone. At first I thought it could of been that the usb stick is broken, so I went out and got a new one. Plugged that one in and the same thing happens.
Every time I plug it into my pc I hear the sound that Vista makes when a device is not recognized. I installed all the drivers and everything was working fine 2 days ago. I'm now using my old usb connector and it's working great. I tried all the usb connectors but all of them make the sound when a device is not recognized.
View 5 Replies
View Related
Aug 9, 2009
I placed a DVD in the tray to do a backup. The spindle spins for 5 seconds and stops. The system does not recognize that a DVD is in the tray. CD's are OK. I probably inadvertently changed something in the past weeks while trouble shooting another problem.
View 5 Replies
View Related
Mar 23, 2008
I had been running Vista since it came out last year with no compatible issues at all. However, there were several issues with performance and finally late last year I gave up and went back to XP. Now that the SP1 is available, I want to go back and install Vista, but for some reason, my computer won't recognize the disc. It trys, but just can't load it. I've tried other DVDs and have burned a couple and they all work fine. For whatever reason, the problem is with the Vista DVD.
View 9 Replies
View Related
Mar 13, 2009
I have an Ultra ATA 100 drive that will not install in BIOS or Vista 32 ultimate OS. I have support on my motherboard for 66/100/133 pata (as well as sata II). I have all dated drivers for the motherboard. I'm using VIA's Hyperion Pro drivers. I think my problem is setting jumpers in the drive. I've tried the drive on both primary master and slave, and secondary primary and slave buses. I've also tried the drive in combinations of 2 HDD and 1 HDD, 1 dvd rom. I've set the jumper to cable select, master, and no jumper with no results. However, the drive works in an AMD box running XP 32. The HDD it is not working in is Vista 32 sp1 ultimate. As it is now i have the HDD on the same secondary bus as my dvd rom. The HDD is set to master, and not showing up anywhere. The drive is a Maxtor 40gb.
View 9 Replies
View Related
Feb 28, 2009
I'm troubleshooting a friends computer and can'tseem to get it working.Basically, he's running Vista Home Prem 32bit. He just bought a new Canon MP480 inkjet printer and everytime he plugs it into his laptop he gets the "USB Device Not Recognized". I tested his printer and cable on my laptop (Vista Ultimate 64bit) and it IDs the printer and tries to install just fine. We're both running SP1 and I just did a double check and I we're both fully up-to-date on Windows update.I've tried uninstalling the USB hardware and then doing new install of the Intel chipset drivers.I've tried "forcing" the driver install using "driver update", but Vista just comes back and says "Driver for "unknown device" currently has the best driver confused I've tried draining the laptops power and I've tried a "driver inf cache" delete thing as well.
View 9 Replies
View Related
May 5, 2008
The disc can be read by a similar model machine. Mine can both read and boot from an XP install disc, but the Vista DVD isn't seen at all (not within XP nor on bootup). There are no firmware updates for the motherboard or drive which are more recent than what's already installed.
View 9 Replies
View Related
May 14, 2008
I have been using a Trust 7 Port USB Hub with Vista SP1, using the built in Vista driver, without issue. However, Vista has suddenly started to report this has 'USB Device Not Recognized'. The hub works with XP and other USB devices work fine when plugged into the same port. I have tried deleting the infcache.1 file as suggested in other threads but no joy.
View 5 Replies
View Related
Mar 23, 2008
My flash drive and my picture device are not being recognized when I plug into my front USB ports. The wireless keyboard/mouse is in a USB port right next to it and that works. I even unplugged that thinking maybe it was a "power" issue. I am a novice, why won't my USB devices work, nothing comes up when I plug them in, just a "bleep" sound but NOTHING else.
View 6 Replies
View Related
Mar 23, 2008
My cddvd drive has stopped working and is not recognized on my computer anymore.
View 8 Replies
View Related
Mar 23, 2008
I have searched the forums through and through, i have removed filters from the registry, rebooted, deleted the driver from device manager and let the system reinstall. When I put a disc in my drive, autoplay does not start or anything. I have checked the autoplay settings and they all seem to be correct. I can put a music CD in and go to Media Player and play the CD. but when I go to my computer and open the drive it doesn't show any files. this is not just for music cd's, it is dvd's, programs and everything. My drive is the Optiard AD-7653 (that is how it is listed in the device manager)
View 6 Replies
View Related
