System Can Go Into Sleep Manually, But Not Automatically
May 31, 2009
I have a home-built computer running Vista Home Premium x64. Curious problem. I can put the computer to sleep from from the shut-down menu manually--i.e., where you see "restart," "shut down," "sleep," etc. with no problem. But for some reason from my power plan option, which I set at control panel, it won't go into sleep automatically. The monitor will shut off, but everything else--hard drive, fan, etc.--keeps going.
My vista home premium workstation when sleep is selected the computer basically re-starts and does not go to sleep....I have no idea where to start looking for a solution.
I have Vista Home Premium x32 with SP2 installed running on an Intel motherboard Core2 Quad with 3GB memory and a nvida 8800GT video board and a 400 Watt p/s, 500GB drive with plenty of free space. My system fan speeds up to full speed and then re-boots. The only warning I get is the fan noise. This happens 5 or 6 times then it won't happen again for a couple days. It seems to happen exactly 1 hour from the last time it rebooted.... no kidding, within a couple seconds of 60 minutes.
Anyway, I thought I would check the event logs for a clue. I noticed that the Shutdown Event Tracker was not available so I looked for a way to turn it on. Vista, at least my version, does not have the gpedit.msc (Group policy console editor?) and other articles indicated that is what I needed to activate the Tracker.
The only thing I can find in the other logs is a recurring entry: "The DgiVecp service failed to start due to the following error: The system cannot find the device specified." how to enable the Shutdown Event Tracker?
In the "task scheduler" the default setting is for "12:00am each day" and the second "trigger" is "upon comuter startup".These are in place and marked as "enabled" yet a "system restore point"is not automatically being created.The event log reads as follows:
Task Scheduler could not launch task "MicrosoftWindowsSystemRestoreSR" as scheduled. Instance "{a1868f64-ed08-49a9-9f86-f62ed855affd}" is started now as required by the configuration option to start the task when available
I want to connect to my broadband Internet connection automatically whenever my system starts up. In XP I did this by creating a shortcut to the connection and placing it in the startup menu. However, Vista Home Premium apparently does not allow me to create a shortcut to an Internet connection. When I right-click on the connection, the menu offers only Disconnect, Status and Properties. The equivalent menu in XP included the option to Create Shortcut. how to launch a connection at startup in Vista? Or is this another of the simple conveniences that Microsoft has decided to make impossible?
I have a laptop that I'm looking at that will automatically boot into safe mode. I've restored the system from the earliest possible restore point but that did not resolve the problem. The only clue that I can find as to the cause is the following event from the system event log. Event 7026, Service control manager eventlog provider. The following boot-start or system-start driver(s) failed to load: spldr Wanarpv6. is that this is the cause of the safe mode but cannot find any solutions to the issue.
The system will not go into sleep mode. i have checked the settings in windows itself to make sure it is setup correctly and it is. I have also installed another OS Windows XP 64 Professional and that will go into sleep mode. I do not know what is causing it but when the sleep button on the start menu i clicked it will act like it is going to go into sleep mode then instantly wake itself up without actually reaching sleep.
Running Vista 64 bit SP1 with all recent updates. Had a strange one, apparently my system resumed from sleep on it's own, below is a copy of the event id, pointing to the usb root hub as the wake source. This apparently occurred, last night, at 10:07 PM. However below that, it also states a sleep time of 1:56 am and wake time of 3:07 am. This is first time this has happened to me. I checked in my bios, nothing is set to wake the computer. No power on by alarm. I checked under device manager , and under the usb root hubs, on the power management tabs, there is not a check to allow them to wake the computer, also not a check under to allow them to power down to save energy............The system has resumed from sleep. Wake Source: Device -USB Root Hub Sleep Time: 5/28/2008 1:56:35 AM Wake Time: 5/28/2008 3:07:01 AM
I purchased a dell laptop last year and have had numerous issues form the start. It is running the Vista Business operating system. I realize I should have sent the thing back to the factory right away, but I didn't. I would like to reinstall the operating system and start fresh to see if the same issues occur: automatically shuting down, blue / black screen, clock consistantly loosing time, printers not working, yadda, yadda, yadda. I have all the restore disks that came with the computer. What do I need to consider before attempting to take it back to square one?
I have an acer laptop and normally put it in sleep mode after using but from a couple of days the laptop doesn't go to sleep mode instead it go to the user login screen...How can i make it go into sleep mode.
The problem is that that wireless mouse does not work after the system resumes from sleep mode - I can use the mouse to wake the system but after the system resumes from sleep i am not able to use the wireless mouse - but after a hard reboot is done the wireless mouse works fine.
1) System will not awaken properly from sleep mode even with Power Options set to default. Often must re-power up yet computer resumes Windows after going to on/off switch rather than moving mouse which often results in nothing happening, other than the computer stalling, or appearing to stall.
2) Also USB devices are having drivers reinstalled from awakening, printer in particular. What are best settings? For example? Device manager> USB root hub> do I set power management to allow computer to turn off this device to save power Do I check this allow box?
I think after this update: Update for Windows Vista for x64-based Systems (KB968389) …my dual monitor video card: PNY VCG86GTS5XWB-OC GeForce 8600 GTS 512MB 128-bit GDDR3 PCI Express x16 HDCP Ready SLI Supported Video Card …sometimes does not bring the second monitor on after waking from S3 sleep. It’s still in dual screen mode as I can see a taskbar window fly to the second monitor. But I have to sleep and wake again to get it to come back on. Anyone else experience something like this? I don’t remember it ever happening before and was wondering if it could be the patch.
I have an HP DV7 notebook that I recently added a second SATA 500 GB hard drive in the expansion bay. The purpose of the drive is to serve as a data drive. I also intend to store an image of my system disk on this internal expansion drive so that I can restore my system and apps when I am in the field. For most purposes the drive seems to be functioning normally. However, I recently noticed that, without my instructions, HP Updates were installing suipport files on my expansion disk rather than on my system disk and I have become concerned that Windows Updates may also end up on the expansion drive (so far they appear not to have done this). On further inspection in Computer Management - Disk Managment I discovered that when I put the expansion drive into the 2nd bay, my original system disk was automatically bumped from the Disk 0 position to the Disk 1 position and my expansion disk became the new Disk 0.
In Computer Managment - Disk Management the system currently looks like Disk 0 - F: Expansion Drive - Healthy, Primary Partition Disk 1 - C: - Healthy, System, Boot, Page File, Active, Crash Dump,Primary Partition.
If I physically pull out the F: drive from the machine the C: drive returns to the Disk 0 position. I am concerned that my system and application updates are going to get splattered across two drives when I want them to remain on the original C: drive. I can find no way in BIOS or Computer Management - Disk Management to assign the Disk and physically swapping the drives makes the system disk unbootable. Am I at risk of splattering my Window updates across two drives? Should I instruct Vista to regard my system disk C: as Disk 0 and how to I do this?
I would like to put my wireless mouse in inactive mode during sleep mode. As it is an mouse movement, usually accidental, wakes up the computer. I looked for a way but couldn't find this facility.
We have some new Visat pc's added to our network and all of them are showing the same problem. What happens is when the users start the pc's they get a message saying the IP address is in use and they have to go and manually change the address to get working. All the pc's are configured with static ip addresses and have been checked to make sure they are on different addresses. Has anyone got any ideas on what is causing this? I have seen one workaround which involved adding some batch files to the startup routine to swap between static and DHCP but I do not want to go down tis route.
I’ve had problems with my Windows Vista Ultimate computer when attempting to turn on the Guest account. It’s gotten to the point where I cannot create any standard user account. Which leads me to the question: How do you manually create a new user in Vista? (Since it has been failing to create a new user through User Accounts).
i have a different case. I have a wireless modem that is capable of wl and wired. i am fine with the wl part, but when whenever i just plug in the lan cable, it connects me to the internet without asking for the user name and password. can anybody give me the steps on how to change the settings for me so that the com will request for a password and username before connecting to the internet.
Windows Vista Ultimate. In Windows XP, I used to manually clear Cookies, Temp files and Internet Temp files from the Local Settings (after enabling the file extension views from Tools > Properties > View tab). How can I do this in Windows Vista Ultimate ? I found only Temp folder under Local in the Explorer but not the Cookies folder and Internet Temp folder.
Since my upgrade to Vista Ultimate (RC1 build 5600) from XP, I haven't been able to manually dim the screen on my laptop. In XP, I could hold the Fn button, and hit F5 to dim, or hit F6 to brighten the screen. This doesn't work on Vista. I have a Vaio FE770G notebook, 1gb ram, 128mb graphics card.
My computer (Vista 32 SP2) freezes and I turn it off manually and start again and all is OK for a while. It seems to freeze at any time even when I am not doing anything. This has been happening for 8-9 months but the problem went away in winter so I seem to think this might be the fan. I have done a clean boot and still it happens. I have uninstalled Vista and reinstalled and still the same so it is not any programs that I might have. As summer is not far away (Australia) I would like to fix this problem as it has started to happen again. I have taken the unit to Acer but they seem to think it's OK they said it was a memory conflict but that is not the case. What else can I do?
It seems I have hit a wall on my particular CPU. I can easily get it dead stable at 3.2 GHz, with the RAM running at 1066 (rated specs) and manually adjusting the timings to 5-5-5-18, also spec. But if i start going any higher the system starts getting quirky - particularly when I resume from standby - it goes south with a BSOD. Gunter, I know you wanted pics, but let's keep it all consolidated in here and start keep it to a relative few people.
Using WinXP, you could go to File Types tab and modify them manually. The tab is missing in Vista. Problem: In XP, I had my sound recorder associated with my .wav files. I modified the properties of the file extension so it would open, play the sound, the close. In Vista, I can't seem to be able to edit the Open or the Play aspect. How can I do this in Vista. Please don't ask me why...we all have our own personal reasons for doing what we do...I just want to be able to do it in Vista...if it's possible.
I have a problem since a month before SP1 came out. I never installed the beta. I have Vista Ultimate 64bits all updates done. When i shutdown my computer turn off correctly. Then within 10 to 60 second the computer turn on. First time i thought i hit restart or hibernate by mistake. I never use these 2 usually because hibernate scrap a hardisk and restart never sure memory cleared (i'm a programmer so i play with memory alot) so i prefer shutdown and power back manually.
So i tough next that Wake on Lan was my problem. I check by bios and it's fine it's off. I updated my bios and same result the problem still there. I searched the net without any result. What's weird is if i shutdown my computer and when i saw it power back on i hold right away my power button so it shutdown before windows even think of starting it turn off and never ever power back on by itself..............
I continue to have a problem with Defender on my computer. Have auto scans set for daily and even if I manually scan, within 30 minutes I get the yellow exclamation mark that it has been 'blank' days since I scanned and need to do so!!
vista starting without explorer.exe, so have to run explorer.exe manually from the task manager to get start menu and everything running normally.... I am not sure of the right category, because this may be is related to virus, driver and system restore issues, please move in the right section, following is the system configuration and the history: also sorry for the long message, but I am really stuck here and if you could spare some time to look into this issue, I tried to provide as much history and details on the issue not just to help you understand my problem but also as a warning for other users who may run into this issue in the future.. it may be a known issue and I just happen to run into it still I would like to provide details and history of what happened, if you help me I will be in your dept for sure!! and you may ask my help anytime if you need something System configuration: my friend has a toshiba satellite latop, with vista premuim. it can preloaded on the laptop. I am not sure of the exact system model and processor but if it's relevant I can provide that info, but I suspect there is some ASUS components/drivers in the system, later I will explain why I think so, as I said I can provide system model or CPU or hardisk space but at this point I feel it's not relivant, cause it's an issue with explorer.exe right now but if you think it's required I will ask for that info, please understand I am giving support over seas from this user but we are in touch via msn and phone so if you want any additional info, even screen shots I will try to provide. History: the Problem started when she called me, and showed me a screen shot of AVG anti-virus free edition trying to remove some virususes off her computer. she said the virus came from a USB driver she borrowed from a friend. and AVG was complaining that it is not able to remove the virus because she has to buy the full AVG version. this sounded wierd, I tried to verify she is using the free AVG but I am not sure, so I ask her to uninstall AVG and try another anti-virus, first thing came to mind is avast, so I asked her to install the latest free version I think it's 4.8, but it turns out it's not compatabile with vista or her system and after some searching on the net I discover a known issue with avast/vista conflicting with some asus drivers and I suspect it is the same case, because she is also like the others reported, getting a blank screen and not able to logon. but before uninstalling avast from safe mode, I tried another suggestion ( I was not aware that avast was responsible at that point in time yet ) so I suggested she try last known good configuration. did that, but still she got blank screen again ( because avast was still there ) so I suggested she go to safe mode and try to uninstall avast ( this is after I found the issue with avast conflicing with asus drivers on some machines with vista ), after going into safe mode, she gets a view of her documents and no start button, after some questions on the phone I figured out that explorer.exe is not running, so asked her to try to run explorer.exe from the task manager, when she did that she got the start button, and was able to goto control panel and uninstall avast and then she rebooted vista. after reboot she was able to go into vista, but explorer.exe again won't run, unless she goto task manager and run it manualy everytime she reboots. I thought I'd do some research why is explorer.exe not running when the system is restarting, I thought maybe I could add it to the system startup or something, but not sure where would be the best place do to that, msconfig? or startup folder for that user? if someone can give me some advice that would be great. she already backed up her files now and ready for a re-format but I am really embarased would like to find a solution to this problem anyway, as now she think I might be an idiot for my poor selection of antivurs software, It's strange I never heard of this compatability issues and I installed avast on vista on other toshiba latops and many systems and I never had this issue ever, I suggested she try another anti-virus but she is afraid now and wants to re-format... and take her time which I understand, but in the mean time I want to try and fix this explorer.exe not runing.
We tried to restart the computer manually, but to no avail. Vista loaded Windows, but before prompting me with a login screen, it dumbed again. We then tried to boot it in safe mode. Everything works fine there, so we tried to reboot normally again. Another dumb. We tried yet again, after removing the disc. Nothing. Since then we've tried system recovery to set it back a few days, we've tried to let it repair itself, we've tried to unplug everything (everything - mouse, keyboard, sound - everything but the monitor). The monitor, by the way, have some weird lines running down the screen, which notably aren't there when booting in safe mode.
The error code that appears on the dumb is as follows: STOP: 0x000000050 (0x8F875370,0x00000001,0x8EB5AB0A,0x00000000)
Excessive memory and cpu use when loading ‘heavy’ internetsites like runescape, stardoll, etc (my children are experiencing most of the problem…). Event viewer indicates ‘excessive page swapping’ and I tried to extend the swap memory size manually, this did not help either. It does not matter which browser is in use (tries IEXPL en FIREFOX). JAVA runs with the latest edition. No memory problems found with memory scan...,System is defragmented on a regular base,No malware found,Tried to start up without virusscan (sophos),Problem started a couple of weeks ago, system run normal before Memory use running heavy java appr 200MB ,Memory use homepage only 2 MB,PC performance index 3. MSINFO.exeinfo: 1G installed; 767 total phys mem; 116 available I wonder why there is only 116 MB physical memory available What causes the degradation: 1GB -> installed memory to 767MB total physical memory -> 116MB available memory? (and this is just after start up, no browsre loaded) Number and 'weight' and weight of boot programs is very low.
