Windows Xp And Network/internet Issue. Manually Setting Of The Ip And Dns Configuration
Apr 20, 2009
We have a network of 5 vista machines, 3 xp machine, 7 voip phone and 1 network printer. The internet of all 3 windows xp machine keeps on dropping once everyday, removing the ethernet cable and putting the cable back doesn't help it, restarting the system doesn't help it, refreshing the ip doesn't, restarting the router either, the only way I found to give them internet again is to manually set the ip and dns configuration daily.
View 6 Replies
ADVERTISEMENT
Sep 12, 2009
i have a different case. I have a wireless modem that is capable of wl and wired. i am fine with the wl part, but when whenever i just plug in the lan cable, it connects me to the internet without asking for the user name and password. can anybody give me the steps on how to change the settings for me so that the com will request for a password and username before connecting to the internet.
View 9 Replies
View Related
Mar 23, 2008
I have a Vista laptop with Home Basic. My other 3 XP laptops can connect to my wireless network ok. I use a Vigor 2600 with firmware v1.06.7.04.2 with wpa/psk 64 bit, mac enabled and hidden ssid. On my Vista laptop from the control panel, network & sharing centre, if i select connect to a network, the following shows; Unamed network - security enabled (there are no other networks round about me). If I select"manage networks" I can see my own named network. I cannot conect to this unless i remove my encrtptionand as numerous forums have reported Vista does not offer PSK when manually configuring a wireless network.
View 4 Replies
View Related
Mar 23, 2008
I have started to notice a lot of vista systems that are connected direct to cable modems saying not connected to internet or showing unidentified network. You cannot create a new connection, because the create a connection is for PPPoE only, (which is not very smart). And when the browser gives you the option to connect, it asks for name/password for a PPPoE connection.
1. How do I get the Vista networking to recognize the fact is has a direct connection to the Internet?
2. How can you create a new connection without it defaulting to PPPoE?
3. Is there any way to force Vista to simply connect to a network, if the network is available, and has been checked with other computers as working properly, and Network discovery is on, and vista simply says unknown network?........
View 6 Replies
View Related
Apr 16, 2009
i was having some trouble setting up an ad hoc network on my computer... (i have a vista home premium computer).. anyway, it seems that the "set up an adhoc (computer to computer) network option is not available
the options that are available are:
connect to the internet
set up a wireless router or access point
set up a dial-up connection
connect to a workplace
how do i make it so the set up an adhoc (computer to computer) network option is available? (if it helps any, im trying to set one up so i can access the internet on my ipod touch)
View 6 Replies
View Related
Apr 2, 2009
I'm having some trouble setting up a network in my home. Here's the deal, I've got my laptop running VistaHomePr 64 and my Desktop running XP Pro 32. I recently got a wireless netgear router. My notebook connects wirelessly through the router while my desktop connects to the router through an ethernet cable. (The router has both wired ports and wireless transmitter)
Now, before I installed the wirless router, I had the two computers networked (and working properly) through a dynex wired router. Now I'm having trouble getting them to see each other. I'm not even sure if you can network computers while one is wireless and one is wired. I just figured it could be done since it was all going through one router.
View 9 Replies
View Related
Oct 16, 2009
I am trying to set up a small network but having some difficulties – it does not work - I have done everything I think I should have done but still it does not work. OK what I have is two desktop machines DT (1) and DT(2) running XP Pro I think with SP2 – dont think I have SP3 and a nice four port O2 wirelessrouter which seems to be a Thomson Telecoms product and lovely new and shiny New Toshiba Tecra M10 running Vista Business. I am running ZoneAlarm as my firewall.
At the movement my main DT PC (1) is the only XP PC connected - obviously using Cat 5 cable and the Toshiba Laptop is also connected using Cat 5 cable. I did the XP set up a home network wizard and that seemed to be OK. I have set both the DT (1) and the LT to be on the same workgroup and on the DT (1) when I go to My Networks and then workgroup I can see (icons for) both the DT (1) and the LT.
I have multiple LARGE drives on the DT (1) and this is why I want the other DT (2) machine on the network to use as a fileserver – i have what must be close to a trillion pictures that i want to sort out - the work of a lifetime and a lifetimes work and i still have years of negatives to scan and sort I will then move all (apart from one) HDD’s to the second DT (2)............
View 9 Replies
View Related
Jun 13, 2009
I am a new guide here, and have a private network setting question.I am using Vista X64 Business, and connecting to internet through HUB without IP sharing function. I set the local area connection to "Private" in "Network and Sharing Center". But it would change to "public" if I restarted the computer.
View 9 Replies
View Related
Mar 23, 2008
I continue to have a problem with Defender on my computer. Have auto scans set for daily and even if I manually scan, within 30 minutes I get the yellow exclamation mark that it has been 'blank' days since I scanned and need to do so!!
View 5 Replies
View Related
Mar 23, 2008
I recently moved my wireless router and cable modem away from my Vista PC. It was always configured wirelessly, as I knew I would have to move it at some point. I left the computer on when I unplugged the router etc. and then set them up downstairs. When I tried to access the network after everything had been set up again, I noticed that Vista thought my home network was an "Unidentified network" but still had my ssid in (___). Only problem was that now my network is "local only". I am connected to the router as local-only, and tried to adjust my router setting via the router page at 192.168.1.1 It was returned as page not found. Is Vista confused? If I was truly conncted to the router and even if internet was not working I should be able to adjust the settings on the router,right?
I can access the internet just fine with all of my other devices in the house, such as Tivo, Ps3 and Windows mobile cellphone. All of these are able to connect to the internet through my router. There are other networks available around me, so I tried to connect to one of those. Same thing, local only. I cannot confirm that internet works on this other network. But I have narrowed it down to a problem with my Vista computer.
View 4 Replies
View Related
Mar 9, 2009
all of a sudden my windows firewall has gone off and I cannot put it back on manually or auto. I have scanned my system with 3 virus programs and spyware programs and all is clear. I do not have any Norton software on my pc but the only thing I have done recently is put a new netgear wireless router on my system. running vista home premium all up to date
View 8 Replies
View Related
Mar 23, 2008
I cannot see a setting for the 1000Mbps Full or Half Duplex with either of the Gigabit lan's in my conputer. Thought the problem may have been with the motherboard on board lan so I installed another card. Both "auto config" both say they are connected at 1 gig into the gigabit switch. But when you go into Device manager, right click device. .properties. advanced tab. . .I cannot find the 1000Mbps listed any where under the Speed and Duplex settings it just has the 10Mbps Full & Half and 100Mbps Full & Half. Transfer rates from computer to computer remain at 100Mbps speed (7-8 meg/sec) not at 1000Mbps (35-40 meg/sec I was getting with XP) as connection lights are showing.
View 5 Replies
View Related
Sep 1, 2008
i'm having problems starting up my windows vista.. when i turn my laptop on there's a screen that comes up showing "configuration updates: stage 3 of 3 - 0% complete" and after a couple of seconds my computer shuts down, restarts and does the process all over continuously with no option of cancelling this process....
View 9 Replies
View Related
Jun 9, 2008
"A system change was made by a known application...change type: application execution...C:windowssystem32mswsock.dll". This happens when I connected to the network/internet and also disconnected from them. When I checked through Event Viewer, I found some errors:
1- Windows Defender Configuration has changed. If this is an unexpected event you should review the settings as this may be the result of malware. Old value: HKLMSOFTWAREMicrosoftWindows DefenderSpyNetSpyNetReporting = 1 New value: HKLMSOFTWAREMicrosoftWindows DefenderSpyNetSpyNetReporting = 2
2- Windows Defender Configuration has changed. If this is an unexpected event you should review the settings as this may be the result of malware......
View 9 Replies
View Related
Jan 11, 2009
I was messing around trying to install another OS which didn't install right and doesn't work and I seemed to erase the windows vista bootloader. So I try using the windows vista recovery disc to repair windows but it does not show up in operating system list in the recovery disc so I click on the option that says to click if your operating system does not show up on the list and it brings me to this file explorer and requests a configuration file in order to view vista. So could you please tell me what configuration file is the one I need and where I could find it on my hard drive since windows is still intact on it, only the bootloader is gone.
View 3 Replies
View Related
Oct 8, 2009
Vista Home Premium (IIRC) and she can't get on the internet. I had a look and it seems that there's a choice of network, ie, Local Only or Local and Internet. Her's is stuck on Local Only and shows a red X between the diagram of a router and the globe. how to change it to allow internet
View 9 Replies
View Related
Mar 23, 2008
I just got my HP Pavilion dv2068ca yesterday. I tried to connect through to internet. It was able to connects to my network, but not able to connect to the
internet. It also says my network is "Unidentified Network" It gave me options to diagnose and repair.
My laptop connect through 802.11 b/g WLAN
My wireless router is a D-LINK 802,11g 2.4GH
View 9 Replies
View Related
Apr 22, 2008
I'm having problems with my home network. I find that I will be on the internet wirelessly with no problems, then all of a sudden I lose internet connection, but I still remain connected to the home network. I have tried disconnecting and re-connecting to the network, this usually doesn't help. Occasionally that will help, but then a couple minutes later, I have the same problem. I have tried running the diagnosis within the Network and Sharing Center. Sometimes it will tell me that it doesn't detect a problem and sometimes it will detect a problem. Then I try to reset the wireless adapter "Wireless Network Connection" and it will appear to have fixed it, and when I try to re-load the page it times out and then I lose internet connection again. The only thing that I have found that fixes the problem is to recycle power to the modem. (Pain in the ass!)
The modem is connected to a desktop computer (I don't remember what it's running, but I know it's a version of XP) and there are multiple laptops within the house that connect to it wirelessly and I'm the only one running Vista and the only one having problems. The modem isn't very old, so I'm not thinking that it's the modem, so because I'm the only one having problems, I'm assuming it's a Vista thing.
View 9 Replies
View Related
Mar 6, 2010
So I am actually posting on this forum for my g/f. She has a Dell Inspiron 1521 running Vista Home Premium x32 on a 64 AMD Athlon processor with 2gb of memory. The issue that we have been encountering is simply this. Her internet just decided it didn't want to work anymore. She was checking her e-mail when the web page said that the internet connection was no longer available. We are currently at school so I told her to take it to "Computing Services" but they said that there was nothing they could do on their end because the computer was connecting to the server just fine. When I look at it I was confused myself. According to windows the internet connection is at an excellent signal strength and the networking map goes all the way green to the glob. So the internet should work. I look over the other forums to see if anyone else had this issue and tried their fixes as well. (i.e. turned off TCP/IPv6 and even got rid of AVG and turned off the firewall) nothing seems to be working. Also to top it off plugging it in hardwire doesn't work either. So does anyone have any suggestions or is it safe to assume that her network card is dead?
View 9 Replies
View Related
Feb 6, 2009
i have is that since i have updated to SP1, my net connection keeps dropping. the network symbol has a '!' over it and i have to click on diagnose and repair and reset the network adapter. this happens mostly when browsing the internet (on Firefox or IE) but sometimes happens when i first start an online game up (cod or war etc). i use a netgear router and have done for the past 3 years and never had a problem. the net connection its self (on the router) does not drop and therefore it has to be a problem with my computer (tested this while having 2 computers running at same time and the connection only dropped on the problem computer). when the connection drops, i cannot ping my router (no lights on the router change - still states the net is connected).
I've tried updating my Rhine II Fast Ethernet Adapter. however when attempting to do this through Device Manager, it says its fully up-to-date. even though the driver date is 17/4/07. I've attempted to update this manually, but i either have to pay for it or I'm asked to download device detective and asked to pay for the download... there are no drivers on the windows updates for this... or at least don't appear on the list.
View 7 Replies
View Related
Aug 24, 2009
My computer connects to my home network through wireless and it says it has excellent connection but when i use programs like firefox or internet explorer it does not work. When i use program like aol instant messenger or a p2p program it works.
Windows IP Configuration
Host Name . . . . . . . . . . . . : miiGz-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : domain_not_set.invalid..........
View 6 Replies
View Related
Jun 21, 2009
My internet has been turning off on me randomly for a good 5 seconds, and it happens daily. I figure it was my internet I set up at home, so I'd connect to another network. Same thing happens. The little internet icon, with the two computers and a picture of the world, the world would randomly disappear which causes my computer to not respond to the internet.
View 5 Replies
View Related
Jun 21, 2008
where they have wireless set up. It works fine on my gf's mac (all the comps on the network are macs) but my PC cant connect. It connects with the network (after a good couple of mins identifying) but not with the internet.
Now i have unchecked TCP/Ipv6 I have disabled the DHCP Broadcast flag on all 4 subkeys i could find. What country are you located in. - US Name of your ISP (Internet Service Provider). - Its my landlords connection so not sure What is the expected Upstream / Downstream speed for your ISP Connection? - erm.. 54mbps Make and exact model of the broadband modem. - Not sure Make and exact model and hardware version of the router (if a separate unit). -Apple Base Station v5.6 Connection type, wired or wireless. - Wireless Ethernet If wireless, encryption used, (none, WEP, WPA, or WPA2) - WPA2 Make and model of your computer. - Dell Vostro 1500 Version and patch level of Windows on all affected machines, i.e. XP-Home (or XP-Pro), SP1-SP2, Vista, etc. - Vista 34 The Internet Browser in use, IE, Firefox, Opera, etc. - Opera My ipconfig comes up with this.......
View 5 Replies
View Related
Jun 18, 2010
I am upgrading from XP to Vista (on the way to Windows 7). After it completes the compatibility check it starts to copy files. About 20 minutes into the process the upgrade aborts with the following message: "Windows could not update the computer's boot configuration. Installation cannot proceed."
View 5 Replies
View Related
Mar 6, 2009
I am very PC-Challenged when it comes to Networking & Internet and I have 2 problems at the office that you may be able to help me with. We have a small business package from AT&T (used to be bellsouth), one of those lines if a dedicated ADSL broadband, each line has a filter and we also have a Netopia ADSL router (motorola 3347-02-1006L) + linksys Gigabit 8 port switch.
There is 1 server (Windows 2000 Server OS w/SP4) and 3 workstations running XP Pro w/SP3 (2GB's of Ram all up to date with drivers and MS updates... I make sure of that). The server sits very close to my workstation as I have a KVM switch to adjust or make changes on it and to utilize only 1 monitor + kb/mouse. This is the first issue we have: (Gibabit Ethernet adapters on workstations)
One of my partners claims that if my computer is off, the software we use to sell our products runs very fast on his computer but, as soon as I turn on my workstation and I load the software, his speeds show significant downtime (slowness?). Again, not being very knowledgeable at networking I find this to be annoying but illogical at the same time
View 9 Replies
View Related
Sep 18, 2008
umm well for about 6 months now i've had my laptop (with vista premium 32 bit) and i was connected wirelessly to my home network with no problems. Then all of a sudden a few days ago (13th or 14th to be precise) at midnight i no longer had any internet connectivity. I was browsing the internet, watching a video, from a little before midnight till 12:30 and when i was done i noticed the loss of internet connection.
When i try to troubleshoot the problem i get the "cannot communicate with primary DNS server". I CAN access my home network (sent a file to our desktop computer's shared folder and recieved it just fine) but my internet connection is down. When i check in Network and Sharing Center i see the line from my PC to the home network in green but the one from home to internet is Xed. On the other hand, my brother (who also has vista on his laptop) did not get this problem and any other periferal accessing the router (wii, xbox360, DS) can all access the internet.............
View 9 Replies
View Related
Nov 29, 2008
i have two laptops using vista (home edition), i want to share internet using wireless ad-hoc network, but when i set up this network it doesn't show me Share internet connection. it worked the first time, but since then i can't do it anymore i have the ics enabled
View 5 Replies
View Related
Jun 8, 2009
Vista has been working great for about 6 months, networking and everything, but just 2 days ago my internet connection dropped and never came back. I looked into it and I am now connected to an "Unidentified Network" with "Local Only" access. I have tried to fix it for 3 days now and have gotten no where. I've tried everything I've read, though I may have missed something, I have even reinstalled Vista 64x.
View 8 Replies
View Related
Mar 23, 2008
I notice a big slowdown in my Internet connection speed when I'm using my network connection. For example, while browsing the web I'm listening to some MP3s in iTunes that are stored on my external network hard drive. As soon as I close down iTunes and the music stops my Internet connection speeds up. How can I force the network connection to use just that and not my Internet connection? I'm running Vista Ultimate. I'm connection to a wireless Internet connection that is plugged into another computer.
View 6 Replies
View Related
Mar 26, 2008
Vista upgrade was cancelled "Windows could not update the computer's boot configuration." Installation cannot proceed.
View 6 Replies
View Related
Apr 6, 2009
I'm running a visa 32 bit laptop and a Windows xp PC on a network and im trying to send files from the laptop to the PC. My laptop is unable to connect to the internet and I think the problem is that I have a virus so I'm just going to reformat the whole thing. I want to send my laptop files to my PC, but when I go to the network and sharing center on the laptop to turn public folder sharing on, the whole window just freezes when I apply the setting. The workgroup names are the same. Is there anything else that I have to do to be able to share the files?
View 9 Replies
View Related
