i have two laptops using vista (home edition), i want to share internet using wireless ad-hoc network, but when i set up this network it doesn't show me Share internet connection. it worked the first time, but since then i can't do it anymore i have the ics enabled
View 5 Replies
I'm trying to troubleshoot a problem. I have a Win7 Home Premium 32bit netbook and a Vista Home Premium 64bit laptop on a wireless network. I'm able to share files, folders, and a printer with no problem, but I can't seem to share the DVD drive on the laptop. I want to be able to install software on the Win7 netbook using the Vista laptop's DVD drive over the network. The DVD drive is shared and given full control permission. It shows up on the Win7 netbook, but when I try to access it, it says Windows cannot access (drive name). You do not have permission to access (drive name). Contact your network administrator to request access.
After browsing the net for a solution, I think an entry in the Vista registry is restricting access to the drive through a group policy. I saw on another forum where changing the Default value to 0 may correct this issue. I also changed the ValueType value to 0. Neither worked for me. Then I noticed that DisplayName value, @wsecedit.dll,-59098. (See picture) I researched and found out that it had something to do with a Group Policy restriction. Since there is no Group Policy Editor for Vista Home Premium, could I simply delete that entry? How else could I change or edit that? (I saw on this forum where someone is working on Group Policy Editor for all versions of Vista).
I have a laptop with Vista business edition connected to a domain. I have installed it with no problems. Now when my user got it she cannot reach the shares or connect to the server with \servernameshare I get the message 0x80070035 I logged in with my domain admin user but i have the same problem. We can reach websites and ping the servers works. What can I do to solve the problem. I have bought 4 laptops but only 1 have this problem.
View 5 Replies View RelatedI have 3 computers in home: 1 is connected via Ethernet to DSL and D-Link wireless router, and is running Vista Home Premium. I can connect to Internet fine on 1.
2 is on my wireless network running XP. It connects to Internet just fine.
3 runs Vista Home Premium, but I cannot connect to the Internet. You can see the wireless network with a strong signal, but the connection is Local. If I remove WPA and make the network unsecured, I can connect to the Internet. If I plug in an Ethernet cable in this computer and into a port on the router, I can connect to the Internet. I checked ipconfig and it shows for the wireless network that there is no default gateway, and the user ID does not show like it does when I run ipconfig with the network unsecured.
I am having trouble with my wireless internet. When i was home over the Christmas break, I attempted to forward my port on my wireless internet at home so my router would allow me to access some of my programs (the router had a firewall on it blocking these programs). Ever since then, the only place i can access wireless internet is only at my house, nowhere ele. When i go other places, I can find connections and connect to them, but i can only connect to the network part of it, not the internet. For example, when I go to the Network and Sharing Center, it will show the connection between my computer and the network working properly, but then the line between the Network and the Internet has a Red X through it and the Internet Globe is grey. When i troubleshoot, it says it cannot contact my server / ISP, and it shows that the ISP is the one from my wireless at home.
View 4 Replies View RelatedI've just recently encountered a problem connecting to the internet with my notebook and when I check to see what was wrong my computer says I'm not connected to any networks. So when I try to connect my computer doesn't show my wireless network it says a cable is not plugged into the network adapter 'local area connection". However everything is plugged in and my mom's notebook has no problem. Also it says that my computer doesn't have a wireless adapter installed and configured but it does and when I go to the properties it says the device is working properly. I don't know what to do anymore. I've restarted my computer and unplugged and replugged the cable and disabled and enabled the adapter.
View 5 Replies View RelatedI have VIRGIN wireless broadband with a Huwai e220 modem. It is connected to my Windows Vista Ultimate desktop PC via USB. I also have a small network comprising 1 x Linux Mandriva PC, 1 x Linux Mint PC, and an old desktop without g/card, monitor, mouse or k/board that I use to store files. My problem is that whenever I connect to the internet I lose my network. When I try to change the settings in the "network and sharing centre" i can get my network but no internet! I hav etried every possible combination of settings that i can do without being able to have both. The strange ting is that sometimes when I connect it all works for about 3 minutes then it falls over!
View 6 Replies View RelatedScenario: 4 PC's. All in the same domain.pc #1, Windows XP Pro pc #2, Windows NT 4.0 domain controller pc #3 Windows Vista 64 ultimate pc #4 windows Vista 32 ultimate Now up until about a week ago every single device could access each others shares no problems. No changes on any pc has been done. Windows Firewall has been turned off as well as defender where appropiate. The problem i have now is that pc#4 is now started having issues with accessing a share on pc#3. Continually getting prompted for username and password. I have even tried an domain admin account which fails. Pc#1 and pc#2 have no issues and are not prompted with username / password related promtps to access this share. Pc#3 can access shares on pc#1, #2 and #4.
View 4 Replies View RelatedI've just bought myself a new pc n have it hooked up to the internet ready to go.... my old pc I have given to my sister and the pc is in her room seperate to mine. Is there any way we can share the same internet connection if so what do i need n is it easy to do?
View 4 Replies View Relatedi have a pc with ADSL wit win Vista x64 with a blutooth device ! and i have a laptop with win vista x64 ! i want to share my adsl with bluetooth ! beetwin pc and laptop !
View 4 Replies View Relateda friend has a new sony vaio with vista home premium installed. For some reason it will not connect to my netgear router wirelessly. I have tried everything. I am however not too hot on Vista as this is my first time with it. The adaptor says its on, but when you interegate it and ask why it wont connect it keeps telling me "switch on wireless adaptor capability". In the network connections it is on, the switch on the front right is swiitched on and the wireless network light on the front is on. The network is fine and working as i have my laptop connected to it. All security is present and entered. It seems to be the computer as it doesnt find any networks when there are loads in the area. Am i missing something exceptionally obvious? Does Vista have another "on" switch for this adaptor?
View 5 Replies View RelatedI have a home office network with one new Dell laptop with Windows Vista Home Basic which I bought a couple of weeks ago, one desktop with Windows XP Pro and one older laptop with Windows XP Pro. The laptops are connected wirelessly, the desktop is using a wired Ethernet connection.
Obviously, there have been never a problem with XP machines. Initially, the Vista machine was also able to connect to everybody else. I didn't even bother to look at the settings because everything worked. Then I went to a business trip, and connected to other networks, including wireless public ones in the airports. When I came back, I was unable to share files or even see other computers on the LAN. The internet connection is working fine though. Oh yes, and I also installed a couple of updates, probably some of those constituting Service Pack 1 as well.
When I checked the network, to my surprise, it turned out that it became "Public" (could this be "guilt by association" - the airport wireless networks are public, so my home network is public, too?). I changed it to "Private". Didn't help. Checked shares, made sure that the users have the same passwords. Ditto. I deleted the history of the airport networks. Still the same.........
ComputerA, running Windows XP 32-bit has a shared folder in read-only mode called SFiles with a sign-on of CAShare and a password of ZXJK1122. ComputerB, running Windows Vista 64, in the Network entry of Windows Explorer shows ComputerA. When I expand ComputerA I can see the SFiles shared folder undereath and when I try to click on the folder it asks me for a sign-on and password. I answer with CAShare and ZXJK1122, and it asks me if I want to save this information and I say yes. Subsequently, when I click on the SFiles shared folder it gives me read-only access to the files in the shared folder. This works excellently.
Subsequently, on ComputerA, I decide to change the password for the sign-on of CAShare from ZXJK1122 to NPPP345T. Now on ComputerB when I try to click on the SFiles shared folder in Windows Explorer I get a message of: "Windows can not access \ComputerASFiles with an error code of Ox80070005, Acces is denied."
That's fair enough, since I changed the password for the sign-on. So I want Windows Explorer on ComputerB to ask me for a new password, and I will reply NPPP345T and now have read-only access again which is fine. But it does not do this but repeatedly denies me access each time I click on the shared folder. Surely there must be some way to tell Window Explorer to get a new password from me for this share. How do I do that ? It seems impossible that Vista will keep me from accessing shared folders of another computer on my network simply because it has decided that I can not change the signon/password to the other computer's shares.
I try to share my printer on my network I get a error 0x00000709 make sure that you have typed the name correctly and that the printer is connected to the network. I can see the printer all looks good but I get this error.
View 6 Replies View RelatedI haven't found a solution to this yet: I have 2 network driver established. They reconnect during reboots and are accessible fine. For some reason they stopped being visible in explorer until I explicitly go to them by enteing the letter in the address bar. Then one or both with show up (usually just the one I put in) I also have an internet webdav drive that also does not show up until i put it's letter in the address bar. If I use applications to access the letters, they show up ok in that application's file open/save box.
View 4 Replies View RelatedI have a desktop running Vista ultimate32 with 2 Gigabit LAN ports. One is on the PCI bus and I have that one connected to my 4-LAN port wireless router as the router is a T-100 piece of gear, and my high-speed internet connection is nowhere near that speed. I also have a laptop runnings Vista Ultimate x64 that I normally use wirelessly and have sucsessfully set up a local network on it for sharing files and media via Windows Media Sharing. I want though to be able to connect the laptop directly to the desktops second gigabit port (the PCI-E one) via CAT-5 cable because large files take forever to transfer to the laptop when i connect either via Wireless-g or plug it directly in to the router. How do I set up the desktop to both share the incoming internet connection and allow me to transfer files directly to the laptop.
View 4 Replies View RelatedHP deskjet OK direct connection by not via network share permalink. I have a HP deskjet 5550 printer connected to a XP pro (32 bit), it is shared. I have no problem using this shared printer either from the local XP machine or another XP machine. I had no problem using the share when I have Vista Ultimate 32 bit installed. However the Vista Ultimate 64 bit gives an error stating the server does not have the correct drivers, and requests that I supply and inf file. Searching the HP web site they state the vista already has the drivers. I connect direct using a USB cable and can print without issue. Even after that no luck connecting via a share.
View 11 Replies View RelatedI am running Vista Business Edition I have a shared folder c:share on my hard drive, and I mapped that to my z: Now from command prompt which is launched with Admin privileges, i am not able to run any application located in Z:. for example Z:
est.exe...It gives an error - System cannot find the drive specified. How should i resolve this or in vista, we cant run any application located in network share from command prompt?
There was no problem to see all computers and share files between them. Now new computer FIVE Vista 64 came to Home Network. I see all computers in my Home Network but I cannot open any computers ONE, TWO, and THREE (with Vista 32) from FIVE as well cannot open FIVE from ONE, TWO and THREE. (I am looking for share created files.) Computers ask me for “User Name” and “Password”. So far I never created User Names and Password for any of my computers
View 7 Replies View RelatedIt has been years, we have been transferring files between our home PCs and Laptops in our home network. But as we updated our Laptop with Vista SP1 & SP2, the network has become a one way only. We can transfer files to the rest of the network PCs, but the Vista Laptop does not let us in. We do see it listed in our network.
We had to re-format the laptop drive and as we loaded the Vista back again, we were able to transfer files two way, but as the SP1 and SP2 update was loaded, file transfer has become one way only. Did go through the setup on the Laptop drive as we did before. What are we missing in SP1 & SP2 updates?
I am trying to help someone running Vista Home Premium setup his network to share files and folders with his XP Home laptop. Oddly enough, there are no share options AT ALL. No share buttons or no share options in the context menus -- NOTHING. We've named the network and simply went out to share a printer (which we have the option to share) but it turns itself off. Same in Network and Sharing Center. We turn the options ON and then turn themselves OFF. We've done all the rebooting, etc. and still no go. I have gone through all the disabling of the UAC and ownership and permissions, et. al. but, can't get anywhere without the SHARE OPTION being available. Is his install of Windows Vista Home Premium broken or needing to be reinstalled? Could that be the problem? Could it have been setup improperly? I have successfully done this before on my Vista Business computer and my XP Pro laptop and although i did have a few 'permission' problems, they were at least workable.
View 4 Replies View RelatedI have forgotten the Username and Password for the Login ID... and it is not the default (Username: *blank* Password: admin). I have heard you can hold the reset button on the back of the wireless router but will this reset my wireless network? By that i mean... will i be able to connect with my laptop still through that wireless network or will i have to set it up again?
View 9 Replies View RelatedI have bought DD a laptop for Christmas and thought I'd get it all set up beforehand. I already have a wireless network here at home, with 2 desktops running xp) and a macbook, they connect via a belkin wireless modem router. Vista however, doesn't even find a network, I get a message saying the network cable is nplugged. Its wireless enabled and the switch is on
View 9 Replies View RelatedI have both a Vista 32 & Vista 64 Acer laptop on the same LAN. Both connect well with the Internet. when I try to see the other computer's Public folder to share a file, I can't even find the other computer in the "Network" window, only the router and the computer I'm working on.
View 9 Replies View RelatedI have a network share setup b/w a Vista Ultimate x32 and XP machines. Using the XP machine, I open the Vista hosted share but found some files "missing", ie. even though they physically exist in the Vista machine, I simply cannot see them from XP. Turns out that these files are missing the EVERYONE in the File Permissions (right click file, properties, security). These are files downloaded using Firefox, and whether they are JPG, AVI, TXT, DOC, XLS they are all missing the EVERYONE permission. If I download the same files using Internet Explorer, the files get created with the EVERYONE permission.
My current workarounds ... which none are desirable are this:Use Internet Explorer, Add EVERYONE permission for each file manually (you have to do this one by one, can't select multiple files and perform bulk operation),Use CMD line utilities like takeown and icacls Note this is a secure home network, and while file sharing using EVEYRONE isn't the safest way to do this, I can finetune this later. The key problem at hand is what I've described above. I'd be happy just to be able to get FireFox create files with the full permissions, same way IE does.
I am using a windows Vista 32 bit home premium notebook computer for which the wireless network detection has stopped working. I updated the driver for the built in wireless card with out any results. I also tried a plug in wireless card which windows detected and said was working properly and this did not work either. This leaves me to believe that something is wrong with the OS. I can get on the internet via dialup modem and also by the ethernet connection with a DSL modem. I have been to several hotspots that I know have wifi and no networks show up. All critical windows updates have been installed.
View 9 Replies View RelatedA nightly robocopy mirror batch file across the internet. The connection/setup has never changed and XP to XP still works today. My new Vista to the XP (across town) is the problem. I had to purchase Vista x64 and built a brand new machine. Very little software on this new desktop and it is litterally 2 weeks old. I have tried disabling the firewall, McAfee Virusscan, etc. Removed IP6, changed most of my settings back to XP look, feel and still no go. Vista things that work are pretty much everything as long as its to do with the local network. This includes net use, firewalls on, mapping drives, remote desktop, you name it. Outside the network for internet and things do work as well, eg. ports 80, 21, 3389, 25, etc.
So far all I know is port 139 is the only does not work and is what I need. As stated before my ole XP desktop is letterally beside my new Vista and continues to work this port 139 if I ask it to, so this shows that the network portion/tracert is there and configuations are working and this has to do with the something inside the new Vista x64. I get the network path not found error 53 or 0x80070035 under the GUI. I changed the "Outbound Rules" for port 139 btu still no go. What can I do? You would not believe what I've tried over a weeks worth of reading, implementing and changing but I have reverted them all back, so each change starts from square one as it is a brand new install.
I have a wireless router on a cable modem and works OK with XP but I can't see the network using my new machine with Vista. I can see my neighbours networks and I can connect to the unsecured ones but my own network does not apear on the available networks list on the Vista machine.
View 5 Replies View RelatedI have a set of 10 wireless laptops (no 1 - 10) and i would like them to be able to share files on any one of the laptops What's the best way to set that up?
View 6 Replies View RelatedI have 2 laptops and a ipod touch which are all wireless conected to my main computer which runs with windows 7.
The problem I have is that one of my laptops today decided not to connect anymore!!
This laptop runs on windows Vista Basic and was working fine this morning but as of this afternoon cannot connect to internet or email.
I have tried to re-connect but I keep on receivibg the error page stating that " windows cannot find any networks "
When I click on the link below this message which is " diagnose why windows cant find any networks" a window named windows network diagnostics appears stating " this computer does not have a wireless network adapter installed and configured "
Does anyone have any solutions to this problem as it was working fine ( wireless ) this morning and now not?
I connect my laptop (Thinkpad X60S on Vista Business) to a WRT54G linksys wireless router and let's say my SSID is HOME.
My problem is this: When I try to connect Vista sees 3 and sometimes 4 networks of the same SSID, e.g. HOME, HOME (2), HOME (3) and HOME (4). It is the same network. Why is this happening and how do I solve it?
