IP Address Has Dissapeared From Adapter Nvidia Nforce 10/100 Mbps Ethernet Is No Longer Being Protected
Mar 30, 2009
My Internet was acting very very slow. My computer was running fast as it always does but the internet was just very slow. I than noticed that in the bottom right corner of my screen the little globe had gone away. when I scrolled over it, it read local only? About one minute later the globe came back and it read local and internet. Whats wrong here? Here is my setup- I have my desktop computer connected to a wireless router (protected) (only used for Playstation) the router is connected to my vonage device, and the vonage device is connected to the modem. I am on vista, I have charter communications as my isp and this is not the first time this has happened!In fact if I look in my firewall I sometimes see connection issues like these- IP address has dissapeared from adapter Nvidia Nforce 10/100 mbps ethernet is no longer being protected (IP address .....) then a few seconds later I will read protecting your connection to a newly detected network Nvidia N force 10/100 mbps (ethernet.......) this ethernet is different that the one that dissapeared.Then I will see other firewall logs with all these connections and all?? Im so confuced. I am 99.9 % sure I have not been hacked by a neighbor.
View 9 Replies
ADVERTISEMENT
Mar 13, 2009
I think it was after the updates loaded for windows incl. sp1 or after the vista patch for the game witcher which came from the microsoft site. Problem is that my optical drives dissappeared and the wireless adapter seemed to become D drive. Device manager says drivers missing but windows says has latest drivers. Have disk for both LG drives but computer cant see drive to be able to run.
View 6 Replies
View Related
Jul 11, 2009
I was over my friends house, I was helping to do some PC inspections before he upgrades to Windows Vista Ultimate 64-bit. I did a Windows Vista Upgrade Advisor Scan. The following issues were encoutered with his Alieware Area 51-7500: (Driver Issue)
Manufacturer: NVIDIA
Issue: nForce Networking Controller. This device will not work in Windows Vista. For more information, please go to the device manufacturer's website, Windows Marketplace, or contact your retailer.
View 9 Replies
View Related
Jan 16, 2008
I just installed Vista on my computer, and was installing all my programs when I had to reboot. I did so, but then realised I'd lost my internet (it had been working up until then). A 'Diagnose and Repair' found that "The network adapter 'Nvidia nForce Networking Controller' is experiencing driver or hardware related issues." As I said, the internet had been working up until then. I haven't installed any Windows updates (it's set to alert me of new ones). I have had this problem before: I installed Vista, internet worked, rebooted after installing various programs, internet didn't work. Left it overnight & tried again next day, internet worked. Sometime later after reboot, internet didn't work. I then tried to install the Nvidia chipset driver again, but it froze part way through the install. This is when I wiped the entire hard drive and started again, but the problem is back.
View 9 Replies
View Related
Mar 23, 2008
The Windows Update for the "nvidia nforce networking controller" caused my internet to not work properly. I restored my system and rolled back the driver, both on separate occasions to resolve this issue. It worked, however, now I need to know what to do about the update. I cannot leave my settings to update automatically because of this.
View 7 Replies
View Related
Nov 19, 2009
I recently bought a new laptop (Gateway MD2614U), which has an Athros AR5B91 wireless adapter. From all indications, it is supposed to have a/b/g/n(draft) capabilities. I initially had a g router and upgraded to an n (Trendnet 652brp) to get greater range (>30') over what my g router would deliver. To my surprise, the distance and speed were exactly the same with the new router. After troubleshooting with TrendNet and trying different settings, they concluded that my wireless adapter would handle only g speed (it would not even connect when router mode was set to "n only"). TrendNet further stated that the vast majority of laptops come with g wireless to save money and suggested that I buy a n USB adapter to solve my speed/distance issues. I have no problem with this but have to wonder how gateway and others can get away with advertising n capability and failing to deliver on it.
View 8 Replies
View Related
Feb 9, 2009
I have a issue with my Linksys wireless USB adapter. I am trying to use it with Vista Home Premium. After installing software... I plug the adapter in (like directions say) and windows update goes to work. It updates the driver, installs correctly, I then connect to my home network and all is good. My prob is for some reason I lose internet and the USB adapter itself. One time I switched users and lost all. I have tried uninstalling adapter and tried reinstalling by pointing to my D drive (install CD) in hopes of using the driver that's on the installation CD. as soon as it saw everything.. windows update once again gave me the same buggy driver. I have tried to install with UAC disabled... no luck... the Linksys website/support for drivers has the same updated driver. I tried to use an older one but Windows keeps forcing this updated one down my
throat.
View 6 Replies
View Related
Nov 29, 2008
I got a Nvidia 8400GS When i got the PC but brought a Sapphire ATI Radeon HD 3870 X2 / 1GB / PCI Express 2.0 / Graphics Card. My brother took out the Nvid card and then formated the PC to make sure that all drivers where uninstalled then put the ATI card in. In divice manager under dispaly adapters there is standard VGA Graphics Adapter and further down the page there is "Other Divices" with Video controller. When it installs these some times the standard VGA Graphics Adapter fail but the video controller succeed but with error. saying. "Incompatable display Adapter has been disabled. At least one display adapter on the system has been disabled because its not compatible with the driver for the VGA adapter". lso i carnt change the resolution above 1024X768. Also my Graphic card is a Sapphier brand but in the windows update its looking for ATI Technologies Inc. - Display - ASUS EAH3870X2 Series
View 9 Replies
View Related
Jun 20, 2008
I have had this X-Fi Snap/Crackle/Pop issue for a few weeks now. It started when I got my 2nd 8800 GTS and an additional 2GB of RAM. The X-Fi card worked great prior to getting these two new pieces of hardware. Then the SCP started happening. My best two leads was that the X-Fi card didn't play nice with 4GB of RAM nor the NForce 4 chipset. After tons of forum research and trying a bunch of possible solutions I have come down to my final try.
My Asus MOBO has a beta bios (1405) that may have the fix for this SCP issue. Since Asus does not release bios information on betas, I am going off of what other people had mentioned about the fixes in this beta bios. I flashed the bios last night and have reimaged my C drive so I know that currently everything is working correctly. I have created a Complete PC Backup image this morning. I will install the X-Fi sound card tonight and see if my SCP issue is gone. If nothing else I can go back to my backup image and try something else. I will update this thread with the results this evening.
View 5 Replies
View Related
Aug 14, 2008
What Card does Nvidia make(or do they)that will play crysis at all max settings and Max Res at close to 60-100FPS? I have seen a system with an 8800 Ultra SLI and out past the 2000 range res it dropped to around 25fps. What about the new GTX280?
View 7 Replies
View Related
Sep 9, 2009
this morning I had a hundred or so emails in the inbox. suddenly they have disappeared and are now sitting in apps data/Microsoft/mail why did they go there and how do I get them back and how do I stop this happening again? I have been getting a pop up saying windows can compact but I cancel each time and what to stop this option
View 5 Replies
View Related
Mar 23, 2008
I am using Windows Vista Home Premium Edition (laptop). My windows sidebar has dissapeared and I cannot retreive it. At each start up I get the message 'Windows sidebar is managed by your system administrator' my pc is not part of a network as I am the only user.
View 4 Replies
View Related
Mar 26, 2008
I am using Windows Vista Home Premium Edition (laptop). My windows sidebar has dissapeared and I cannot retreive it. At each start up I get the message 'Windows sidebar is managed by your system administrator' my pc is not part of a network as I am the only user.
View 4 Replies
View Related
Mar 20, 2010
where can I download the latest version? My current driver is Out-Of-Date!!
View 7 Replies
View Related
Aug 7, 2009
I just changed the letter on a external hard drive. Now the disk drive icon has dissapeared?? I tried to change it using a ico file, but nothing is working? It is still the same?? Does anyone know what has happened? or, tell me what to do? To get the image back?
View 9 Replies
View Related
Jan 3, 2009
Well I was in the registry editor trying to clean up my context menu a little, and as a result I nolonger have "open" in the context menu for audio and video files only. This means double clicking doesn't open the file. I can however go to "open with" and open it that way.
View 9 Replies
View Related
Mar 23, 2008
I am running the Hardware in my sig. the machine runs all 04 OS perfectly, 'cept Vista32Bit. I upgraded to the VX2235WM from the Benq FP72E (a 22" 16:10 and 17" 4:3 respectively) first on the 8800GTS 320MB, everything was fine, when one day, the desktop after loading Vista, just dissapeared, there was nothing, no wall paper/gadgets/taskbar/ icons...nothing, except for my mouse cursor, and by default a window "My documents" open, and showing contents. At first i was under the impression that it was my GPU/DVI cable/or the LCD, after 03 months (in pakistan there are NO consumer rights...so you fight or call in favours to RMA, and then get a new replacement piece) i got everything changed, still no dice......
i used the 163.04/09 and the latest WHQL 169.25....no display used the VX2235 drivers from MS update nad WHQL's from Viewsonic's website Changed the GPU to the 8800GT XFX, in the hope that just perhaps the
broken VC2 engine might be causing troubles, used the same..............
View 9 Replies
View Related
Mar 29, 2009
Been trying for hours to use Xbox 360 to access music and other files on my compuer, using both Drive address and network address. ALL files can be seen successfully on WMC on the Vista computer but nothing on the Xbox 360 -- except some photos on my son's XP machine (that worked easily).Could really use a simple solution to this please!
View 5 Replies
View Related
Mar 23, 2008
in Window XP, i used to be able to select full address to be displayed in the address bar. But for Window Vista, I could not find the way to do it. e.g. instead of showing D:Document, i want to show \sapsgsmapsnap01document. I want to send the link to my colleague to access directly to destination folder.
View 9 Replies
View Related
May 15, 2008
Whenever i create a new email by click "To" to open up my address book for selecting any email address, or when i use "reply all" and want to add in some more email address from the address book, the computer start to run and till it stuck, so the only choice for me is to end this task and type email address instead of selecting email address from address book.
i thought that this is because i got too many email address, thus i deleted most of it and now only got 700 email address inside my address book, i just can not understand that when outlook express can take more than 3000 email address book, but windows mail can not take about 700 email address book. And somemore, this email address book is just useless for me, because whenever i want to use the address book, the windows mail is going to hang... and the only choice is to go to task manager, end this task and restart my windows mail.
View 9 Replies
View Related
May 4, 2008
After installing SP1 on my laptop the hard wired ethernet works intermittently. The DHCP connection is successful but when I try to ping something most of the pings don't work. Looking at the ethernet socket I can see the green LNK light goes out about once every 30 seconds. I have uninstalled and reinstalled the driver as well as the device. Also, since the machine is still in warranty the manufacturer replaced the mother board which contains the ethernet hardware.
View 5 Replies
View Related
Apr 25, 2009
I have a ps3 and I wan't to connect to the internet so I bought a wirelesss router and about 3 ethernet cables (I didn't know it wasn't neccesary)I try calling verizon to help hook up my router but they say some thing was wrong with the router it wasn't lighting up. So I bought a new router and the Ethernet wasn't lighting up eather. My dsl modem isn't lighting up eather so i've proved that my pc isn't recognizing my ethernet connections... My uncle has a ps3 and he has internet so I called him and he couldn't help me because the problem is with the pc. What do I have to do? I'm freaking out i've tryed using my other ethernets and the results are the same as before!
View 4 Replies
View Related
Feb 25, 2009
Need directions to remove a former friend's email address from my address bar. Whenever I create a message to someone with an address starting with the same first letter, his email address also shows up.
View 5 Replies
View Related
Sep 27, 2008
My motherboard supports 2 Gigabit Ethernet LAN through Teaming. Since I have a D-Link DIR-615 router that has 4 ports, I was thinking about trying to see what gain if any can be gotten with LAN teaming if I can get it to work. I understand the basics about it, but I was wondering if anyone actually has or had LAN teaming (link aggregation) setup and how well did it work for you. I have searched the net, but there really isn't anything very helpful or detailed about setting it up. I'm hoping that someone could provide some more insight about this before I dive into it and find myself without a network connection for a bit.
View 9 Replies
View Related
Mar 23, 2008
I just upgraded to Vista Business on my laptop and I can't get it to connect to the internet using my Netgear Wireless Ethernet Bridge.
The Network Identification process identifies the wired LAN and the wireless network, tells me I'm connected to multiple networks and only grants me Local access. I can connect to LAN devices on the other end of the bridge but it won't connect outside of my subnet.
I have an XP desktop machine that uses the same bridge to connect to the DSL router downstairs and it works fine. The laptop also worked fine when it was running XP.
View 9 Replies
View Related
Nov 21, 2008
I got a HP dv6000 and I am having a problemo! Its a newish computer. I bought it nearly new off ebay, and I put vista on it. Vista works and all but it only recognizes the dial up port. The computer has wifi and an ethernet port but it will not detect any network.
View 6 Replies
View Related
May 30, 2009
Is there any speed difference or anything that i can get with a external (PCI) ethernet card then a internal ethernet? Im asking about this because im thinking of getting a Killer Nic M1 but not entirely sure if i should get it or not.
View 5 Replies
View Related
May 27, 2008
I want to move some files off of the desktop onto my laptop using an Ethernet cable, which I already have. I don't want to use wireless and I don't intend to connect the two to the Internet. I just want to move files. Can someone explain to me how I can set up a network between the two of them?
View 4 Replies
View Related
Apr 25, 2009
My computer is very slow on wireless so I plugged in and ethernet cable... However it isnt being recognised.... I went to drivers and it says my ethernet controller isn't installed. After searching for very long I found a forum where someone seemed to have the same problem. They were told to download a program called EVEREST. I downloaded this program however I now have no idea what to do with it. Noone is answering me on that forum so I have come here for a release from the stress!
View 4 Replies
View Related
Jul 18, 2008
When online in IE, bottom toolbar says Internet protected mode OFF, when I double click on that, it opens internet properties, where there is already a ck mark in the box that says ENABLE PROTECTION MODE (REQUIRES A RESTART OF IE), but I restart IE, still unprotected message. OK, then try rebooting pc...darn, still unprotected. Ok, uncheck the box, click apply, then ok, restart pc, then go into internet properties and ck the box all over again...and on and on and on... So, how exactly is this SUPPOSED to work ?
View 4 Replies
View Related
Mar 23, 2008
I have Vista Ultimate 64-bit on a new computer, and Windows 2000/pro on a much older (8 years?) computer. I have no difficulty transferring files from one to the other using flash memory units. Both systems are running fine. I was told, by a not always reliable person, that I can simply plug either a regular ethernet cable, or a crossover ethernet cable, into each computer and each will immediately recognize the other, and each will show up on the other's Window Explorer windows. Then, I'm told, I could drag and drop files from one computer to the other with a click of a
mouse on either computer.
So, I tried it. Purchased a new crossover ethernet cable, plugged it in, and no visible response. No sparks, no smoke - nothing. Directory trees did not change on either computer's screen. The person who told me this would work doesn't "have time to check into it right now."
My questions:
1. Is it likely that I caused any damage to either computer? Both continue to work as well as they ever did, so I don't think so.
2. Is it possible to connect the two computers together, via such an ethernet cable, and have them behave as I had been told?
View 9 Replies
View Related
