I got a problem with my resolution, I cant choose higher than 1024x768. I have uninstalled/reinstalled, cleaned all drivers both for my screen and video card, nothing works. When I have uninstalled my grapich card i can choose higher res, but when I reinstall it, it will set back to 1024x768.
I have looked all over but cant find anyone with the same problem..........
I want to buy a new graphics card as I feel the 8800GT is 'weak' now. I want to play games on much higher settings and higher resolutions. This involves buying a more powerful graphics card. Now my question is how do I know / what graphics cards are compatible with my system. Is compatibility motherboard dependent? I know that the Dell PC I have does not have an SLI motherboard, so can it run any GPU? Also I don't know what power supply the PC has. But if it can power an 8800GT it should be okay in powering other cards right? Also do you have any recommendations as to what I should get. Price should be below £160 / 181 EUROS / $261.
View 9 Replies View Relatedis it better to use a higher multipilier or higher fbs. i can get my e8400 to goto 7 x 533 (3731) or 8 x 475 (3800) or 9 x 425 (3800) all stable with the vcore and memory listed below.
multipilier fbs core speed vcore memory ( 1:1 ) temps
7 x 533 = 3731 1.28 5,5,5,15 39/58
8 x 475 = 3800 1.36 5.5.5.15 39/60
9 x 425 = 3825 1.36 5,5,5,15 39/60
what's the best one to use?
I am having ongoing resolution problems when I install my video card drivers. BEFORE I install them, my screen resolution is 1280x1024 which is what it should be. AFTER I install the nVidia drivers, the maximum allowd resolution drops to 1024x768. Note: I have an SLI configuration. Also, This is the maximum allowed resolution. It is too low for my monitor.
View 5 Replies View RelatedI'm running Vista Ultimate 64-bit. I have a 24" LG Flatron L246WP-BN HD widescreen monitor and an integrated Radeon HD 3300 GPU on my ASUS M3A78-T mobo. After buying the monitor I realized it wouldn't work properly with my old system so I built a completely new one. (Check out my full system specs.) The monitor's native resolution is 1920 x 1200.
The problem I'm having is that I can't set the resolution higher than 1280 x 720. If I do I lose almost one-half of my screen (everything shifts to the left so I can't even see my Start button, etc.). Am I doing something wrong? What good is it having a widescreen 24" 1920 x 1200 HD monitor if I lose half the screen by setting it to it's native resolution?
I bought a GeForce GTX260 and so far it's amazing. But I've been told that the resolution on the computer is based on the graphics card. The highest mine goes to is 1440x900. I've seen some go 1900xsome number. Is it possible to get my resolution higher or does my graphics card not allow that?
View 7 Replies View RelatedI'm having some problem with my audio. I have 2 regular speakers. I just bought a new computer (Vista Home Premium installed) and using the same 2 speakers that I had on XP.
Default setting is at 2.1. (I understand that means you have 3 speakers but I only have 2) and there's no setting for "Stereo". And the problem is that the audio doesn't go higher than 50 and the volume is VERY low. I tried so many different forums and couldn't find any results.
I've been reading around for quite a while now, looking for an answer to my problem with no luck in sight (so far). I've recently upgraded to Vista using a dual boot setup with XP. I have a 42" Sharp Aquous (1080p) display through DVI-HDMI. In Windows XP, using the default "Plug and Play Monitor" driver, I'm able to use 75Hz or 85Hz at 1920x1080 (which the monitor does support). In Vista however, with the "generic pnp monitor" driver, it won't allow anything other than 60Hz, regardless of the 'hide modes' check box. Now, some people would say that 60Hz should be fine for an LCD monitor, but here's the problem. With 60Hz, for some reason, the actual screen display size is somewhat smaller than the actual screen size (about a 1-1/2" border all around) which was the case in XP as well (issue with the sharp display i suppose). In 30Hz, the display size is perfect (just as in 75 or 85Hz), but at 30 it becomes very blurry and terrible with any motion on the screen. So basically, I can only use this monitor at either 75 or 85Hz.
This has to be a Vista OS problem (and not at fault by the ATI display drivers). I've read that some people have had similar problems with their CRT monitors as well. Some have suggested using refresh rate forcing programs, but since they were all made for XP, none of them work in vista (I've tried reforce, refreshlock, pstrip and reschange). how to remove the 60Hz cap, or make a custom monitor driver that will allow it?
I need to choose between these 2 systems:
1.
comes with an Athlon 64 X2 5000+ 2.6GHz dual core processor, 1GB of DDR2
RAM, and a 320GB SATA II hard drive
and Vista Home Premium (32 bit)
2.
comes with Pentium 4 CPU, 3.2 GHz, 2GB of DDR2 RAM, and a 320GB SATA II hard
drive and Vista Home Premium (32 bit)
The real difference is only the CPU and RAM size.
I'm trying to use a VPN connection and it works fine if I'm using my wired connection, however if I'm on my wireless network at home, the VPN connection does not work unless I disable the ethernet card.
View 8 Replies View RelatedI talked with Asus cause i wanted to buy a HD For my Notebook. So, they said it would work fine, but it would get too hot, and that i should buy a cool pad for my computer. Which Coolpad should i choose? I want one that is very powerful, and that works great to cool the computer.
View 4 Replies View Relatedhow come i cannot choose recipients when sending emails. it has happened before and i uninstalled an update (can't remember the update ). however, that update is not installed and now i cannot choose recipients, nor can i add a new contact to my contacts folder.
View 7 Replies View RelatedI have a unused Audigy 2 ZS, and my mobo has Realtek ALC888 7.1 HD sound onboard...
Considering the following :
- I want to do Photostory3 and Windows Movie Maker stuff high quality
- I would still like to be able to play games like Ghost Recon, COD2 and Far Cry with surround sound.
- I want the best performance, and the least headaches...
Which one should I use, the Audigy 2 ZS (and alchemy for EAX support) or the onboard (will I still have non-EAX surround in older games, and will it use too much my CPU for video editing?)...
I have single user, home computer running Vista Home Premium (32 Bit). My e-mail usage level is fairly low. (About 15 - 20 per day.) Right now, I have two e-mail systems on my machine namely Windows Mail and Microsoft Office Outlook 2007. I am looking for advice on which one to use. Windows Mail appears to be the simpler one and would satisfy my requirements but I do not wish to use it if it is likely to be discontinued in the near future.
View 4 Replies View RelatedWhen I start windows home premium on a new pc for the first time should i get an option to choose the installation language? I bought a pc in germany and the start up failed i got an error message in an endless loop i got it to start with the recovery disc but that has set it to German and i cant change it. Can anyone confirm or not that if the set up had run correctly i should have been offered the option to set up in English. if this is the case i can go back to the manufacturer and complain.
View 4 Replies View RelatedI downloaded some new Mac fonts and I want to change the default font in Vista to one of them. I can't do that via Appearance>Advanced, because there's a limited variety of fonts to choose from.
View 5 Replies View RelatedThis may be a Office 2007 question. I use Windows Fax & Scan and Outlook 2007. I am unable to choose a recipient from Outlook 2007 Contacts correctly to use in Windows Fax & Scan. When I click on the To: Button in Windows Fax & Scan I only get three columns shown. Name, Display Name and E-mail Address. If the intended recipient does not have an email adress their name does not appear. What am I setting up incorrectly. I can not see an option in Windows Fax & Scan. Is it a Outlook setting.
View 4 Replies View Related"Default Programs>Set Default Programs>Windows Calendar>Choose defaults for this program" and take a screenshot?
View 3 Replies View Relatedive got a 64 bit system with hard drives c: and D: each with 125gig of ram. Vista is installed on C: but how do i access the 125gig free space on D:, When ever i download it always goes to C: without giving me the option to download to D: Sorry if this is a noob question
View 4 Replies View RelatedI've downloaded several stationaries from the Window's site. It's taken me forever to find where Vista downloaded them. Why can't I choose where the files are downloaded? It gave me no option to do this.
View 4 Replies View RelatedAfter having my computer crashing - for whatever reason - i took it in to have all important documents (work stuff) that i needed transfered to an external hard drive.
I was informed to re install Vista, and that all my information will be lost.
When i did this, i did not reformat the drive, so it saved all the other stuff in a folder titlled windows.old.
I respoke to the person who assisted me, and told him of the issue that i am having which is:
Choose operating system to start or press tab to select a tool ...
I am looking for the recommendation of utilty erasing data from harddrive. I need the utilty which: 1. Will NOT stop on errors (disk write errors) but it will continue until all disk is done or 2. Will allow me to choose sectors to overwrite.
View 9 Replies View RelatedI know every one here has this default Vista (even XP) problem. The problem is that the folder customization / layout never stays the way you set it, even minutes later after closing/re-opening explorer. This is driving me insane. For example, in explorer under Computer I choose large icons. Close, re-open its back to list view instead. Sometimes other folders will somehow change views by themselves too. This is really annoying.
View 7 Replies View RelatedAm trying to install xp on a new laptop that already has vista. Have made another partition using vista disc management. I boot to xp disc and go to install but cannot choose a drive or partition as box remains empty and nothing shows.
View 8 Replies View Relatedi am running window 7 and vista. vista is on a 250 hard drive. window 7 is on a 500 hard drive. now to change window i turn my pc off. and change the red cable from drive to drive. now what i like to know is. if i connect the 2 red cable on the 2 drive do i get to choose window on boot up. or do i need a special program to make it work. now it is with 2 drive not a single drive .
View 9 Replies View RelatedMy "size" option appears to have gone missing, and I'm not sure why. I searched with google, as well as these forums, though I could find no answer to my problem. (Though that doesn't mean one hasn't been posted; my searching skills may just be crappy.) Regardless, has anyone had this, or a similar issue, occur? Or does anyone know how to add your own "details" to choose from so I can get it back manually? I saw this: Folder Size for Windows Explorer. I probably need something along those lines, but for the size option instead... Also, if I'm somehow just staring at the list and missing it even after scanning through each item, (Picture included to rule out/verify idiocy on my part.)
View 9 Replies View RelatedI am not sure what has happened but the following message appears when turning on my comp: Quote: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1) Insert your windows installation disc and restart your computer
2) Choose your language settings and then click Next
3) Click 'Repair your Computer'.
If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: windowssystem32windload.exe. Status: 0xc000000e Info: the selected entry could not be loaded because the application is missing or corrupt. I have the disk but how do i boot from it? I am very worried i've broken my comp for good.
I installed SP2 for Vista when it came out. I created a new user account today. I opened Windows Media Player 11 and it started with Welcome to Window Media Player 11 for Vista window. It wants me to Choose the initial setting... Express or Custom. I can pick either one and the Finish button appears. I try click on the finish button, but nothing happens... the button doesn't animate to show it=E2=80=99s been clicked on. I checked the version on WMP_setup.exe and it is 11.0.6001.7000 and won't work with wmplayer.exe 11.0.6002.18005 installed. Content-Transfer-Encoding: quoted-printable ......
View 4 Replies View RelatedI Have Windows Vista OEM 32 bit that came on my computer. I noticed that the full retail version of ultimate includes the 32 and 64 bit install. With the anytime upgrade to ultimate can I choose between the 32 and 64 bit vista ultimate? I do realize that I would have to do a clean install of the 64 bit OS. I would like to try the 64 bit version but would also like to be able revert back to the 32 bit if the 64 bit doesn't work out. If I can't then the 32 bit version it is as I need to join a domain.........
View 9 Replies View Relatedi went to open a zip file by right clicking on it, choosing "open with" and then "Choose Default Program." Accidentally, I chose Word. Now, I can't seem to change this. I can't find an option anywhere to get rid of this, nor is it showing me the "extract" options anymore when I right click. None of the options in the Start Menus Default Programs tab seem to do anything of use for me either.
View 4 Replies View RelatedIn the middle of today, after having used Windows Mail all morning, when I tried to create another mail, and clicked the "To" button, I got the "unable to choose recipients" message. I did not manually install Windows updates. But, when I went to Windows Update, there apparently was one "automatically" loaded without me realizing it.
I went in, and uninstalled it, but still get the error message. I can create emails, however, if I simply start to key in a contact's email address. Also, if I open "Windows Contacts", select a contact, and click E-Mail, a new email window opens, with the To recipient pre-filled. BTW, KB933928 was not the update that was listed in Windows Update, so that shouldn't be causing the problem.