I put together a new system, and the hard drive shows its true size (250GB) in the bios, however during the windows vista 64bit installation the hard drive says its only 232 GB. I then exited the installtion and restarted. It still said it was 232GB. I continued on with the installation hoping to see if it would change once Windows was installed with all the drivers. I paritioned the drive so that windows would be 50GB and the rest of the drive would be for whatever i wanted and i would split it up later. I proceeded to format the remainder of the hard drive before i went on to install windows, and it stayed there for a while and then i realised it locked up and i got a BSOD.
I reset the computer, and went on to install windows and i didnt bother to format the remainder of the hard drive. Windows installed without any problems, but when i get to windows, the drive still shows as 232GB. I ran a memory test from a Kubuntu CD and its not the ram.
I have a Lenovo X61 machine with Windows Vista. I have 3 GB RAM...1GB+2GB in the 2 memory slots. I got a new 2GB RAM and pulled upgraded the machine to 4GB by pulling out the 1GB. After the installation, the BIOS shows 4GB RAM, but Windows shows only 3GB. In computer properties, it shows 3062MB. In system information, it shows
Total Physical Memory - 3061.50 MB Available Physical Memory - 1.32 GB Total Virtual Memory - 6.16 GB Available Virtual Memory - 4.36 GB Page File Space - 3.28 GB
Why is it not detecting the 4GB Memory though it shows up in BIOS. Do I need to upgrade anything or change any settings?
I know theres a problem with 4GB of ram under Vista 32 but...I've been running Vista 64 Business for a couple of months now, and I only recently noticed this (I believe it was OK before...):Does anyone have ANY idea how this is possible?Bios shows 4GB as well. I'm running an intel D975XBX2 mainboard, with an E6600 CPU @ 3.0Ghz. 4X 1GB Corsair twinX and an ATI HD3870X2 videocard.
I just bought a new computer with Vista. I want to use Windows mail for one of my email addresses... a live.com address. Every time I try to set up mail for my address, it says all identities have been imported. But that's not true. What do I do now...AND why doesn't microsoft offer real help? Cost them too much????
My buddy was bringing over some files for me on his laptop hdd running xp. I plugged it into my vista x64 computer via usb and I am having a few issues. The hdd shows up in My Computer and shows stuff in it but when I open it, it says that the folder is empty. I whent to Vistas disk manager and it shows everything is fine with the hdd but for some reason the files just wont show up.
I have been building computers for a while now and have not had any problems so far that I could not solve. Now I don't know where to start. I have purchased the following items:......Now when I try to install the vista 64 bit I get the famous BSOD! Mostly with the error message I stated in the title. I dont know what to do. Does anyone have any information for me?? ....65N Rast to disable the TBL patch in the BIOS in order for this to work. I do not know where to diable this patch on my mainboard. Do I need to update my BIOS? With what version??
im a bit confused a got 4gb ram on my pc but windows vista only shows it as 2gb, does this mean my computers only using 2gb ram because im doing high render animations and i need the full potentional of the 4gb.I have an xps 730?
Sometimes when I install drivers I get the message that my BIOS is out of date (including updates from AMD) if I go to the Phoenix site it says go to the motherboard manufacturer or run Biosagent if you use this you pay for the update but you do get this info so is it worth e-mail gateway support, using the boisagent or just leave well alone.
Info from biosagent BIOS Type: Phoenix-Award BIOS Date: August 18th 2006 BIOS ID: 08/18/2006-C51PVGM-GB-6A61HE1BC-00-None BIOS OEM: C51PVGM-GB V1.0 081806 - 6.00 PG.............
My 80gb Vista laptop is out of space, so I bought a 250gb drive and installed it in a USB 2.0 enclosure. I have tried both the True Image clone procedure and also partitioning the 250gb with 2 partitions then backing up the original drive to one of the partitions, replacing the 80 with 250 and tried to recover into the blank partition but no success.
I get the cannot boot message and must use the install cd to enable the new clone but I still am unable to boot into the cloned version. I have had great luck with Acronis but just cannot make this work. I am using True Image Home V10 Build 4.942) with Windows Vista Home Basic with SVC Pk1. Are there any of the drive manufacturers that have a utility that will get around this boot problem with Vista? I am ready to buy another drive just to get this done.
I got 2 new 1 Gig PNY sticks of RAM, and installed them and now my comp won't show but 894 Mb of it. And to top it off I have to use more virtual memory until i can figure this out.
I am able to backup my C drive to my D drive with no problems. The problem I have is that I cannot restore my C drive from the D drive that I have it backed up on. I tried to do it from both the desktop, and from the original install CD, and also a rescue disk that I created. I keep getting an error message telling me to restart. Nothing works that I try. Do any of you know what the difference is between True Image 11 and TI 2009?
My video card is DirectX 10 ATI Radeon HD 2600 Pro 512mb. The latest Catalyst driver 8.4 is installed.
But:
Windows Vista 64 "Performance Information and Tools" shows that "Graphics: Desktop performance for Windows Aero" has 4,8 Subscore and "Gaming graphics: 3D business and gaming graphics performance" has 4,9 which are very low, that the HD 2600 Pro is the bottleneck of my computer. Why does Windows Vista score the card so low? How to improve the performance of the card?
I have bios update, and knowing very little on what this is can someone tell me if this is going to be hard or easy and can it harm my Laptop, HP Pavilion Entertainment PC windows Vista.
I've just gotten an Acer Aspire 6920, which came with Windows Vista SP1 preinstalled (Beforehand, let me just say I normally use Linux, the only reason I want to keep this operating system is because there MIGHT be some programs that don't have native replacements, or run in wine that I may need at university - Without that,, I wouldn't even bother with Windows, apologies to Microsoft.)
After the usual "Hey there, you bought an Acer, let us preinstall about 50 programs, and let you reboot 6 times in the process", I was up and running (Well, after another reboot for updates that is.) - All went well for a day or so, no problems, starting up went fine for a few times. Then, suddenly, without anything from my part, the system refused to boot. It went through the BIOS fine, and showed the little blinking underscore (So, nothing in Windows yet, all BIOS) - Then it restarted, went through the BIOS, showed it's pretty underscore, rebooted, etc. etc. No error given anywhere during the process. Pressing F12 (Windows bootloader screen) did nothing, it'd just reboot before something could do anything.
I installed Ubuntu on the thing (Which, for the record, works absolutely brilliant.) - And allowed it to overwrite the MBR with GRUB. GRUB can boot into Ubuntu no-problem, and has detected Vista in the correct partition (SDA2) - It allowed me to choose it from it's list, after which the system instantly rebooted to BIOS->GRUB, and back to the selection list.
Currently I have 2 HDD. One SATA, with Vista on it, one IDE, with an old XP copy on it. I am booting from the SATA HDD. Well the I have my DVD Drive as the IDE Master, the HDD as the Slave (All I do on the IDE HDD is recover files). Well BOIS sees all the drives, Configures correctly (I think), but then I get into windows. It sees C: and D: Paritions on the SATA) but not the IDE Hard Drive. It sees the DVD RW drive too. So, what's wrong? If I unplug the DVD Drive and set the Samsung as IDE Master, It works fine. I can't set the HD as master and the DVD as slave though; the ribbon doesn't bend that way.
I have purchased a boxed Acronis True Image Home 2009. Installed it on my fairly new PC running on Vista (with all the updates) Home Premium and registered and updated the software with Acronis. I have immersed myself in the Acronis User Manual until I was ready to go. I used the True Image wizard to create a bootable rescue disc. Placed the disc in my PC's combo DVD/CD Rom/RW drive. There is the usual whirring noise and the Windows Explorer pane opens up showing a restore manager folder containing 7 files (no .exe file) then more 'gravel' noise and after waiting for ten minutes absolute silence and nothing more happened. Assumtion: the disc is not bootable.
I made several more rescue discs and tried to run them several ways including starting up the PC with the disc in the drive. That opens up Windows in the usual way but no disc boot up! Acronis web support have sent me a link to download an ISO file of the True Image software which I have downloaded and burnt the ISO image file to CD. But this still will not boot up. Not sure where to go from here? This is the brand-leader in backup/cloning software and a near-new PC. Is there something I have overlooked? Have I got to go 'messing' with my PC's BIOS - not keen on that??
I want to do a true clean re-install of Vista Ultimate, and wipe out all data on my hard drive (not a clean lite re-install). When I select drive D I'm told it's too small to use for the install. I'm unable to resize this drive.
I want to do a true clean re-install of Vista Ultimate, and wipe out all data on my hard drive (not a clean lite re-install). When I select drive D I'm told it's too small to use for the install. I'm unable to resize this drive.
i dont have a windows disc (one was not supplied when pc purchased) and i had a few problems booting up windows, i managed to sort it but i am paranoid now incase it happens again as i don't have a boot disc so the above sounds perfect, but i don't have a clue where to start.
My brother has just built a computer and can't get it working. The problem is that when he starts it he gets to the screen where he can choose to enter BIOS. 9/10 times he can't do anything from there but 1/10 times he can press delete and then it says "loading bios" but it freezes there (he waited 30 mins nothing happened). Does anyone know what the problem mihht be?
In the past few weeks most of the windows will not keep either size and position in the screen, nor will they keep the way they are suppose to be viewed, they were keeping it since I installed Vista.
I can no longer use the restore system, since it has been too long since the problem started, I thought that a simple rebooting as it used to work, would this time around, but it did not. I even runed a CHKDSK /R on all of my HDD
How could I fix that
BTW I did not installed any hardware or software around the time that the problem began, and I rebooted when I installed the lastest Windows Update, since it required it
New to Windows mail. I type and view screen using Ariel size 10 but when I print out mail I get size 12. I can't find a way to change it and it's annoying.
While browsing files and folders I've noticed something extreemly annoying. You can see the size of individual files in the Size column but you cant see the folder's contents size. This extreemly frustrating and I cant seem to find where I can enable that function. I know you can scroll your mouse over folders one at a time and a window will apear and you can see the size then, but thats just inconveniant for what Im doing. I need to be able to glance at multiple folder sizes constantly.
I have used true image a number of times & have had good results.I recently tried backing up& had 2 blue screen crashes.I had installed virtual pc just before this and was wondering if true image can't backup a hdd with virtual pc installed or is it Vista ?If it is because of vpc how am I going to backup my hdd without installing vpc ?
My saga with Acromis True Image continues. I have successfully installed it on my fairly new Vista PC and found a way of creating and using a rescue disc by adjusting the bootup sequence of the drives. I now find that each time I try to do a backup to my Buffalo external HDD - reformatted to NTFS - I get the error message "Failed to execute the task - Error #1364 - A specified authentication package is unknown (0xFFF0)"
Acronis web support say I should edit the registry as a registry entry is missing in the following registry subkey: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlLsa. This surprised me as my PC is not on a network. This is covered in You may not be able to connect to a remote server, the Workstation service may stop, and you may receive an "Error 1364" error message in Windows Server 2003 or in Windows Small Business Server 2003........
I have been trying, without success, to have Windows Explorer open as "Maximized". Yet, it continues to only open in a pre-set size. How do I get Windows Explorer to open as "Maximized"?
I've seen numerous posts out there about how to get Vista to remember the size and position of Windows Explorer. Altering registry keys, holding down Alt, Ctrl, or Shift while closing etc. None of these worked reliably for me. Here's what I've stumbled across that works in my Vista Home Premium 32bit:
* Position and size Windows Explorer as desired. * Select the Computer folder (via Navigation Pane or Address Bar) * Close Windows Explorer (no need to hold down any keys)
I there any max. size for the Windows Mail? Presently I have 1.4 GB and around 11000 files and 400 folders in my Windows Mail and not surprising it's a little bit slow when starting. However it works fine and fast. Could I continue forever let's in a couple of years having 140 GB and 1000000 files and 10000 folders? Don't know how Windows Mail uses memory RAM and sidefiles when opened. Is that a limiting factor? I'm using Vista 32 bit with 2 GB RAM.
I have only had Vista for 10 days and already I'm getting messages that my mailbox is full and some messages are being blocked. I used Outlook Express for 6 years and never had this problem. A tiny mailbox is no use to anyone, how can I increase it's capacity ?
