BIOS Sees The IDE HDD, Windows Does Not Configures
Mar 30, 2009
Currently I have 2 HDD. One SATA, with Vista on it, one IDE, with an old XP copy on it. I am booting from the SATA HDD. Well the I have my DVD Drive as the IDE Master, the HDD as the Slave (All I do on the IDE HDD is recover files). Well BOIS sees all the drives, Configures correctly (I think), but then I get into windows. It sees C: and D: Paritions on the SATA) but not the IDE Hard Drive. It sees the DVD RW drive too. So, what's wrong? If I unplug the DVD Drive and set the Samsung as IDE Master, It works fine. I can't set the HD as master and the DVD as slave though; the ribbon doesn't bend that way.
View 4 Replies
ADVERTISEMENT
Jun 7, 2008
My vista only sees 2 gig out of 4 gig installed. Bios sees 2 gig and diagnostic memory tool sees no problem.
View 9 Replies
View Related
Jul 30, 2009
I have Vista Home Premium and a brand new Dell Laptop. I've just bought Office Ultimate 2007. Everytime I open outlook or try to take any action, I get "please wait while windows configures microsoft office ultimate 2007". it takes a good while before it goes away. I have cleared the registry. I have uninstalled the previous trial office. I have uninstalled ultimate and reinstalled. Turned off the User security. looked at loads of threads
View 9 Replies
View Related
Aug 22, 2009
I have a Ultimate 64 PC with a USB hard drive attached, a new problem has come up, hopefully someone can help me fix it.
When I start my PC; Windows is asking me what I want to do with the Drive, open the pictures, play the music, open it to view the content etc, it's as if I have just attached the drive.
View 1 Replies
View Related
Dec 1, 2008
Just installed Outlook 2007 today. Seems that when opening Outlook or when sending messages that Windows installer is repeatedly running before things are done. States gathering necessary information or configuring Outlook in notification boxes and then things will finally process once all this stops. Is this a none issue with Outlook and Vista that one has to live with?
View 9 Replies
View Related
Oct 25, 2008
I installed a Radeon HD3870 into my Gateway GT 5676 pc which has/had intergrated HD 3200 on the MB. I used Driver Cleaner Pro to clear out the 3200 drivers and loaded the 3870 card and drivers.
When I run:
Device Manager it sees HD3870
System Info it sees HD 3870
GPU-Z it sees the HD 3870
BUT
Dx Diag sees the old 3200! and
C Cleaner lists the 3200,How do I get then all to see my HD 3870? I think my benchmark scores are on the low side.
View 4 Replies
View Related
Feb 28, 2009
I have Windows Vista 64 bit Edition, which I have installed SP1 on. I have 4gb of Ram, which is correctly shown in the System Information (this is also shown as 4gb in my 32bit Vista OS). But here is the problem, in the Perfomance tab of Task Manager it shows that I only have 3070MB of Physical Memory. In the Resource Monitor confirms this. My motherboard supports 8gb ram, and I am using Crucial memory, the model of which is supported by the motherboard.
View 4 Replies
View Related
Mar 12, 2009
I have been building computers for a while now and have not had any problems so far that I could not solve. Now I don't know where to start. I have purchased the following items:......Now when I try to install the vista 64 bit I get the famous BSOD! Mostly with the error message I stated in the title. I dont know what to do. Does anyone have any information for me?? ....65N Rast to disable the TBL patch in the BIOS in order for this to work. I do not know where to diable this patch on my mainboard. Do I need to update my BIOS? With what version??
View 5 Replies
View Related
Sep 4, 2008
I've scoured the related threads on such dual boot issues in this forum, and my actual situation appears not to be exactly addressed. I have a dual boot system, with XP in the primary partition (50GB), and with Vista in the first logical partition (150GB). XP sees itself naturally as being in C:, and sees Vista as in E: (absurdly seeing the CD/DVD drive as D:), whereas Vista sees itself as C: and XP being in D:.
What I want to do at the moment is NOT ONLY to enable myself to boot straight into Vista, and NOT ONLY to clear out XP, but also to move my Vista installation to the physical position where XP is at the moment, so that it is on the outside of the disk and would have better disk performance - the same reason that good HD defragmenters put the most-used files on the outside of disk or at least of the respective partition.............
View 9 Replies
View Related
Mar 23, 2008
I use Vista Home Premium full install with 4 SATA hard drives. My data drive is a WD 750-gig. Disk Management sees 698.64gb with no unallocated space. It's an active partition on a basic disk. But when I open "computer" or an explore page, it sees the smaller value.
I've found solutions for xp/2000 that involve enabling 48-bit LBA, but I haven't seen anything on Vista. I don't recall being prompted for the SATA drivers during the load (F6) but I can't promise anything because it's been awhile.
View 9 Replies
View Related
Feb 6, 2009
I am running VISTA home premium. On my previous machine, I was running XP Home and connecting my iPod to the computer thru a powered HUB. It worked fine, and iTunes recognized my iPod. When I migrated to this new machine with VISTA, iTunes no longer sees my iPod when it's connected, and I have to precariously connect it through one of the USB ports on the face of the tower (since all the ones in the rear are occupied).
View 4 Replies
View Related
Feb 25, 2009
Sometimes when I install drivers I get the message that my BIOS is out of date (including updates from AMD) if I go to the Phoenix site it says go to the motherboard manufacturer or run Biosagent if you use this you pay for the update but you do get this info so is it worth e-mail gateway support, using the boisagent or just leave well alone.
Info from biosagent
BIOS Type: Phoenix-Award
BIOS Date: August 18th 2006
BIOS ID: 08/18/2006-C51PVGM-GB-6A61HE1BC-00-None
BIOS OEM: C51PVGM-GB V1.0 081806 - 6.00 PG.............
View 5 Replies
View Related
Jul 6, 2008
I have bios update, and knowing very little on what this is can someone tell me if this is going to be hard or easy and can it harm my Laptop, HP Pavilion Entertainment PC windows Vista.
View 5 Replies
View Related
Jun 19, 2008
I've just gotten an Acer Aspire 6920, which came with Windows Vista SP1 preinstalled (Beforehand, let me just say I normally use Linux, the only reason I want to keep this operating system is because there MIGHT be some programs that don't have native replacements, or run in wine that I may need at university - Without that,, I wouldn't even bother with Windows, apologies to Microsoft.)
After the usual "Hey there, you bought an Acer, let us preinstall about 50 programs, and let you reboot 6 times in the process", I was up and running (Well, after another reboot for updates that is.) - All went well for a day or so, no problems, starting up went fine for a few times. Then, suddenly, without anything from my part, the system refused to boot. It went through the BIOS fine, and showed the little blinking underscore (So, nothing in Windows yet, all BIOS) - Then it restarted, went through the BIOS, showed it's pretty underscore, rebooted, etc. etc. No error given anywhere during the process. Pressing F12 (Windows bootloader screen) did nothing, it'd just reboot before something could do anything.
I installed Ubuntu on the thing (Which, for the record, works absolutely brilliant.) - And allowed it to overwrite the MBR with GRUB. GRUB can boot into Ubuntu no-problem, and has detected Vista in the correct partition (SDA2) - It allowed me to choose it from it's list, after which the system instantly rebooted to BIOS->GRUB, and back to the selection list.
View 8 Replies
View Related
Jun 1, 2008
My brother has just built a computer and can't get it working. The problem is that when he starts it he gets to the screen where he can choose to enter BIOS. 9/10 times he can't do anything from there but 1/10 times he can press delete and then it says "loading bios" but it freezes there (he waited 30 mins nothing happened). Does anyone know what the problem mihht be?
View 9 Replies
View Related
Mar 1, 2009
I put together a new system, and the hard drive shows its true size (250GB) in the bios, however during the windows vista 64bit installation the hard drive says its only 232 GB. I then exited the installtion and restarted. It still said it was 232GB. I continued on with the installation hoping to see if it would change once Windows was installed with all the drivers. I paritioned the drive so that windows would be 50GB and the rest of the drive would be for whatever i wanted and i would split it up later. I proceeded to format the remainder of the hard drive before i went on to install windows, and it stayed there for a while and then i realised it locked up and i got a BSOD.
I reset the computer, and went on to install windows and i didnt bother to format the remainder of the hard drive. Windows installed without any problems, but when i get to windows, the drive still shows as 232GB. I ran a memory test from a Kubuntu CD and its not the ram.
View 8 Replies
View Related
Sep 19, 2008
I've been messing around in my BIOS. Installing some faster RAM and trying a slight overclock (2.4 t0 2.7Ghz on a Q6600) and seem to have caused myself several problems. Firstly I tried to push it a bit further on the FSB- from 1200 to 1300-the system wouldn't boot and wouldn't let me into the BIOS. I eventually got round this by removing the mobo battery. I was able to get back into the BIOS and revert to my original oc. However when I booted I got a re register Windows this is not a genuine version notice. I had to 'phone microsoft and get a new activation ID. I'm now back in windows (Vista HP 64 bit) but seem to have a few left over issues. My clock was set back to 2006 and that meant I couldn't activate Gmail etc. I went back into the BIOS and reset the date but could not change the day. So it's 3.19PM on Monday the 22nd of September, 2008. I've tried everything I can think of but cannot find a way to make it Friday, which it is.
Also I have Kaspersky Internet Security 2009. This keeps reporting that my computer is at risk and I need to update. I've updated over a dozen times but it doesn't seem to change and is still telling me it needs to update. These are ther first problems I have noticed. I hope I don't find more. Does anyone have any advice as to how to get my day and date correct and how to convince Kaspersky it's up to date?
View 1 Replies
View Related
Mar 23, 2008
I have a wired router connected to a combination wired/wireless switch (both are LinkSys and pretty old). The PC in question has a wired connection to the switch. In the Network and Sharing Center, Vista sees two Networks: Network (private) and Unidentified Network (public), but both have the same IP information. Both also say local and internet access, but I cannot connect to the Internet. Disabling one of the active connections (one of the fixes suggested by Windows) causes all network connections to be disabled. I have tried resetting the router and switch, renewing the DHCP lease and resetting the network adapter to no avail. The most frustrating aspect of this problem is that it is intermittent. Sometimes, without apparent reason, the computer will "just work." There is another Vista PC also with a wired connection to the switch that has no trouble connecting to the internet and correctly sees only one network.
View 9 Replies
View Related
Apr 11, 2007
I am trying to update the bios on my computer but I am running into problems when booting from a usb flash drive. I get the error: "Windows failed to start. A recent hardware or software change might be the cause. The boot selection failed because a required device is inaccessible."
I have been going about this process following instructions found here: Solution for Updating the BIOS on Windows Vista x64 Machines (VistaJuice)
View 5 Replies
View Related
Mar 2, 2009
I can't get the computer to boot from the disk. I can't get into my BIOS or anything because for some reason my keyboard won't work until the login screen. What are some other methods for reinstalling that don't require a keyboard, or if someone can give me some hints on how to fix this keyboard problem. I've tried 4 different keyboards and none of them do anything. I've tried 3 usb ones and 1 prongy one. The prongy one won't even work so I guess that's out of the question. What are my options? I just want to clean everything. I don't care how.....
View 4 Replies
View Related
Sep 7, 2009
Hi i have just bought a new laptop as i fried the MoBo in my last one which i bought in the early days of Vista, not realising what system requirements were for Vista i landed up with a very under resourced in the hardware dept. laptop and i am shure my constant tinkering with the hardware caused the death of it.
Which brings me to my query (now that i am overly paranoid about tinkering with hardware) i have been researching and have found there is very mixed opinion on applying Bios updates and was wondering what people here thoughts. I have two pending Bios updates 1st addresses better support for SP2 and the 2nd improves system performance & LCD panel brightness.
and if i apply these updates do i need to do both updates or just apply the current one, any opinions would be greatfully received.
View 2 Replies
View Related
Apr 3, 2010
im new to the concept of overclocking, i dont really want to atempt it but i do have a question. Is it possible to overclock CPU without using BIOS? When i go inside my CMOS setup i cant go into CPU settings.
View 9 Replies
View Related
Oct 17, 2009
I thought I would try Ubuntu on my computer. I have a Microsoft Wireless keyboard and mouse. They both worked while setting up dual boot. Once completed, Ubuntu loaded, however I didn't have a keyboard and mouse to select the operating system. They worked well once in Ubuntu. I changed the boot OS default to Vista 64 and I have access to Vista again.
The problem is that no keyboard I try allows me access to the bios. I've tried unplugging the drives as well, still with no luck. I want to repair Vista (MBR)using the disk, however can't change the boot order in the bios. Is there a way to repair MBR from within Vista?
View 7 Replies
View Related
Oct 10, 2008
My motherboard is causing my vista to be very unstable. Review say I should flash down to an earlier bios. How do I go about doing this?
View 6 Replies
View Related
Jan 16, 2010
I have a Compaq Presario. How do I repartition/reformat through BIOS?
View 5 Replies
View Related
Oct 16, 2009
MB Asus P5N-T Deluxe, Just upgraded from Core 2 Duo to Core 2 Quad. Cannot enter BIOS. At boot the message "new CPU fitted to get best results update your BIOS". When pressing DEL it says entering BIOS but doesn't. Tried using the Installation disc but get a blue screen saying windows shut 'cos new H/w or S/W fitted. How can I update the BIOS if it can't be got? Will it mean replacing the CPU - downloading and installing the updated BIOS then refitting the Core 2 Quad?
View 8 Replies
View Related
Aug 27, 2008
i'm using A GIGABYTE GA-EP45-DS3R (rev. 1.0) MOTHERBOARD WITH THE Intel Core 2 Duo E8400 / 3.00 GHz processor. i set the vcore in the bios and bootup the system and run cpu-z version 1.46. the bios is set to 1.20 and CPU-Z reads it as 1.16. what reading should i trust? also this board seems to be crap for overclocking. my other board with the e8400 chip will do 4+ ghz. this one i can't get over 3.6ghz and so far thats not stable. my temps are 44c and loaded 56c.
View 5 Replies
View Related
Mar 26, 2008
I decided to do a complete reinstall of Vista 32 bit. What I'd like to know is the configuration of my Bios. I have an abit NF-M2S with a AMD 64 X2 4400 running wirh corsair 2x 1gb xms2 ddr2-800 cas mem. Like I said not sure about the bios settings but I am looking for proper performance. Also have an Hauppauge HVR-1600, I can set up the usual HD and boot process stuff, but the other timing and such got me lost.
View 4 Replies
View Related
Apr 14, 2008
I have a Lenovo X61 machine with Windows Vista. I have 3 GB RAM...1GB+2GB in the 2 memory slots. I got a new 2GB RAM and pulled upgraded the machine to 4GB by pulling out the 1GB. After the installation, the BIOS shows 4GB RAM, but Windows shows only 3GB. In computer properties, it shows 3062MB. In system information, it shows
Total Physical Memory - 3061.50 MB
Available Physical Memory - 1.32 GB
Total Virtual Memory - 6.16 GB
Available Virtual Memory - 4.36 GB
Page File Space - 3.28 GB
Why is it not detecting the 4GB Memory though it shows up in BIOS. Do I need to upgrade anything or change any settings?
View 4 Replies
View Related
Mar 23, 2008
What I'd like to know is the configuration of my Bios. I have an abit NF-M2S with a AMD 64 X2 4400 running wirh corsair 2x 1gb xms2 ddr2-800 cas mem.
View 4 Replies
View Related
Apr 30, 2010
how to use phoenix bios editor...
View 4 Replies
View Related
