Domain Authentication Fails On To RDP Attempt
Mar 23, 2008
Here is a Vista Remote Desktop problem we are having. It affects every Vista machine I have seen on our network. I believe this is going to be a tough one? Remote machine? Vista Enterprise on Windows 2003 AD network. Local machine? Vista, any version, domain member or not, connecting from within the network. When trying to complete the Remote Desktop connection using a domain account, the user gets the following error:???No authority could be contacted for authentication. For assistance, contact your system administrator or technical support.??? If the local (client) machine is running XP, no problem. If you use an account local to the remote Vista machine, no problem (not surprisingly). Strangest of all, if I try to make the connection from a machine outside of our network, no problem.(Normally the firewall would block that, but I temporarily allowed RDP from anywhere.)
View 6 Replies
ADVERTISEMENT
Apr 20, 2008
My problem happened yesterday when I went to re-install Vista on my computer in an attempt to wipe the drive. I inserted the Windows Vista installation DVD into my computer, followed the instructions and then clicked the 'Custom' button on the menu which said I could start a clean copy of Vista, or something like that. So I did this and it asked where I wanted to do this, I selected the /C disk partition (I think it's called). After about 20 minutes it finished and when the computer restarted everything was deleted and wiped as I expected but I could not connect to the internet. This is what I didn't expect. I have a broadband connection wired into my computer (not WiFi) so I saw no reason it should have terminated my connection or something, but Internet Explorer said to make sure that Work Offline wasn't checked, which it was. I unchecked it but when I did a menu appeared that asked for a username and password. I'm not sure which username and password it means. I understand everything is erased but I just want to be able to connect to the internet again. Also I'd like to note that the software (games, etc.) fail during there installation.
View 4 Replies
View Related
Jun 13, 2009
I'm in the process of rebuilding my wife's Sony Viao after Sony reimaged the HD (Vista Home Premium) and got to the point where I wanted to create a restore point. This attempt failed, I went into SAFE mode and tried again and I get a message "The Volume Shadow Copy service used by System Restore is not working. For more information view the event log. (0x81000202). I go to the Event Viewer and it fails "Event Log service is unavailable. Verify that the service is running." When I go to the "Services" I don't see any entry for the "Event Log" - what should I be looking for? How do I get the system restore working?
View 4 Replies
View Related
Aug 19, 2009
The message could not be sent. The authentication setting might not be correct for your outgoing e-mail [SMTP] server. For help solving this problem, go to Help, search for "Troubleshoot Windows Mail", and read the "I'm having problems sending e-mail" section. If you need help determining the proper server settings, please contact your e-mail service provider.
The rejected e-mail address was 'lkr32141@yahoo.com'. Subject 'free flagstone (maplewood)', Account: 'pop.att.yahoo.com', Server: 'smtp.att.yahoo.com', Protocol: SMTP, Server Response: '530 authentication required
View 8 Replies
View Related
Mar 22, 2009
while i request my newsgroup, i receive an error with following contents: 480 Authentication required for command
Code: 800ccc4a
Port: 119
Protokoll: NNTP
This problem only appear for 1 newsgroup. All in the rest of the newsgroups operates perfectly.
View 4 Replies
View Related
Mar 23, 2008
I receive mail fine but keep getting the above e-mail message problem when trying to send. I have Vista loaded with McAfee.
View 7 Replies
View Related
Dec 7, 2009
The message could not be sent. The authentication setting might not be correct for your outgoing e-mail [SMTP] server. For help solving this problem, go to Help, search for "Troubleshoot Windows Mail", and read the "I'm having problems sending e-mail" section. If you need help determining the proper server settings, please contact your e-mail service provider.
View 8 Replies
View Related
Mar 23, 2008
message can not be sent. the authentication setting might not be correct for your computer. I can send all my emails except to one person, who also uses comcast as the server. I've called comcast before and they deny they are the problem even though my settings are spot on with what comcast wants.
View 6 Replies
View Related
Apr 12, 2010
I just created my account and it is not working. This is the error mesage I get: The message could not be sent. The authentication setting might not be correct for your outgoing e-mail [SMTP] server. For help solving this problem, go to Help, search for "Troubleshoot Windows Mail", and read the "I'm having problems sending e-mail" section. If you need help determining the proper server settings, please contact your e-mail service provider.
The rejected e-mail address was 'sararoberts@cox.net'. Subject 'Videos', Account: 'pop.east.cox.net', Server: 'smtp.east.cox.net', Protocol: SMTP, Server Response: '550 5.1.0 Your email could not be delivered at this time. We apologize for the inconvenience. If you are using a new Cox.net email account, please try again in 15 minutes. If you are not using a new email account, visit for additional assistance in correcting this issue.', Port: 25, Secure(SSL): No, Server Error: 550, Error Number: 0x800CCC78
View 4 Replies
View Related
Nov 3, 2009
Here is error message:
The message could not be sent. The authentication setting might not be correct for your outgoing e-mail [SMTP] server. For help solving this problem, go to Help, search for "Troubleshoot Windows Mail", and read the "I'm having problems sending e-mail" section. If you need help determining the proper server settings, please contact your e-mail service provider.
The rejected e-mail address was 'johnpdunaway@allshores contracting.com'.
Subject 'Balance in QuickBooks register', Account: 'Office Manager Allshores Contracting', Server: 'mail.allshorescontracting.com',
Protocol: SMTP, Server
Response: '501 : malformed address: contracting.com> may not follow
View 9 Replies
View Related
Sep 19, 2009
I am able to receive email from my windows live account into Windows Mail. But when ever I try to send it comes back with errors. I have checked and rechecked over and over again the settings. This is the error I keep getting: "The message could not be sent. The authentication setting might not be correct for your outgoing e-mail [SMTP] server. For help solving this problem, go to Help, search for "Troubleshoot Windows Mail", and read the "I'm having problems sending e-mail" section. If you need help determining the proper server settings, please contact your e-mail service provider.
The rejected e-mail address was 'Brenda Book (crazymom03@sbcglobal.net)'. Subject 'Memorial to Faith Marie', Account: 'pop3.live.com', Server:
'smtp.live.com', Protocol: SMTP, Server Response: '501 5.5.4 Invalid Address', Port: 25, Secure(SSL): Yes, Server Error: 501, Error Number: 0x800CCC79?"
It comes back with this error no matter who I use as the email address I am sending it to.
View 6 Replies
View Related
Nov 11, 2009
I still cannot send emails with error message as follows: The message could not be sent. The authentication setting might not be correct for your outgoing e-mail [SMTP] server. For help solving this problem, go to Help, search for "Troubleshoot Windows Mail", and read the "I'm having problems sending e-mail" section. If you need help determining the proper server settings, please contact your e-mail service provider.
The rejected e-mail address was 'ch@aapt.net.au'. Subject 'trst', Account: 'Windows Mail', Server: 'mail.aapt.net.au', Protocol: SMTP, Server Response: '554 5.7.1: Client host rejected: (SPM:RAD) User account blocked from sending email due to policy violation - Please contact support', Port: 25, Secure(SSL): No, Server Error: 554, Error Number: 0x800CCC79
View 7 Replies
View Related
May 25, 2009
About a week ago, I realized I could no longer send email. Same goes for my laptop on my home wireless network. Everything has been working fine for years and I don't recall making any changes that might affect the email. I have changed to port 587 and checked the authenticity required box but it didn't do any good. I went through Comcasts instructions for setting up email using Windows Vista, but it's still a no go. Another suggestion I read about is email scanning software. I turned of Norton 360 email scanner but it didn't fix the problem.
Here is the error I'm getting on my desktop box when I try to send a test msg to me (or anyone else for that matter). "The message could not be sent. The authentication setting might not be correct for your outgoing e-mail [SMTP] server. For help solving this problem, go to Help, search for "Troubleshoot Windows Mail", and read the "I'm having problems sending e-mail" section. If you need help determining the proper server settings, please contact your e-mail service provider.....
View 9 Replies
View Related
Mar 23, 2008
Error message is: Account: 'pop.central.cox.net', Server: 'pop.central.cox.net', Protocol: POP3, Server Response: '-ERR An authentication mechanism MUST be entered', Port: 995, Secure(SSL): Yes, Server Error: 0x800CCC90, Error Number: 0x800CCC18
I have checked and unchecked authentication and SSL boxes, I have called my ISP and they have reset my password, but nothing is working. What is the problem with this program???
View 9 Replies
View Related
Mar 23, 2008
I have 2 computers, one has Outook (xp) and one has Windows mail (vista) both set up for the same email address. When I receive an email on Windows and open it, it doesn't appear on the Outlook computer. Anything received on Outlook always comes through on Windows.
How can I get my email to always appear on both computers?
Also, the Windows Vista computer will only receive email, I get an error message when I try to send:
The message could not be sent. The authentication setting might not be correct for your outgoing e-mail [SMTP] server. For help solving this problem, go to Help, search for "Troubleshoot Windows Mail", and read the "I'm having problems sending e-mail" section. If you need help determining the proper server settings, please contact your e-mail service provider.
View 9 Replies
View Related
Aug 5, 2008
I just imaged my computer with Vista 64-bit, I can not log into it after joining the domain and restarting it. I get the follwoing error "The security database on the server dose not have a computer account for this workstation trust relationship"
View 5 Replies
View Related
Jun 5, 2008
I'm setting up a new Windows Server 2003 server for my company, with a
mixture of XP and Vista machines connecting to the server. I have created a
domain, and I can connect all my XP machines to the domain just fine.
The trouble with Vista is that whenever I try to log into the domain, the
screen comes up with an error:
"The User Profile Service failed the login. User profile cannot be loaded."
Unfortunitely I'm not a major networking guru, so I can't really figure out
what Vista is expecting here just to connect to a domain. I assumed that
something this basic in networking wouldn't have been so complicated.
View 9 Replies
View Related
Mar 8, 2010
Why does it take so long for Vista to join a domain? I have a vista pro machine. Locally everything works fine local user signs on builds the desktop quickly. From the local profile I join a domain. It finds the domain quickly, then asks to reboot.. I reboot sign on as the admin of the domain.. Next step is to build the desktop for the user I'm signing on as.. It just sits on the welcome screen spinning. I do not experience this problem on XP machines joining this same domain. I've also tested it on a Windows 7 machine and did not experience this problem.. I can't figure out why it takes so long on Vista.. I actually never get to the point of building the desktop..I don't really see any hard drive activity either?
View 4 Replies
View Related
Mar 23, 2008
I can successfully add a Windows XP Professional computer to my domain. Windows 2003 small business server hosts my windows domain. I cannot add a Windows Vista ultimate computer to my domain. The error message reports that DNS cannot find the domain controller. When I ping the domain controller, the replies successfully return.
View 4 Replies
View Related
Mar 23, 2008
I have a desktop computer currently running Windows Server 2003 Enterprise edition act as server and a couple of desktop computer running windows SP for my network. Recently I bought a wifi router and change all my wired LAN to wireless LAN. All of the wireless connection works fine accept when I use my notebook running windows vista home premium , was unable to join to the domain at my windows 2003. On my vista notebook, I try to goto the system properties but couldn't fine the network setting button that says joining a domain (like the button on windows XP). there's only a button available to rename the computer. my question is: how to join to my domain using vista home premium.
View 4 Replies
View Related
Mar 23, 2008
One of my users has Windows Vista Home Premium. I want to add the computer to my domain hosted by Windows 2003 small business server. I cannot find the feature to add the computer to the domain. The usual location is the "Computer name" tab of properties of "My Computer" in Windows XP Professional
View 8 Replies
View Related
Oct 8, 2009
We are running at my work 2 workgroups. My CoWorker and I are on a domain and need to connect to one of the servers on the workgroup using a simulation program. We get access denied error messages in the simulator program. Windows Explorer connects just fine to the workgroup server though.
We think there is a problem with the password security policy on the workgroup not being up to standard of my domain's security policy. The password to log into the server causes an error message saying the password is "too long, too short, or not complex enough." when we try to create a user account.
View 8 Replies
View Related
Mar 23, 2008
We have a Windows Server 2003 active directory domain, ISA server with VPN, and one Windows Vista client. The Vista owner calls me every time he wants to connect with VPN, and tells me that he cannot. Looking in Active Directory shows me, that his domain user account is locked out. When I unlock the account he is able to login. It seems that something (a service? office 2007?) does try to authenticate with wrong credentials, and locks his account every time it can.
I have the default settings for the account lockout policy, threshold of 3, and 0 for lockout duration. This problem is really annoying so much, that I think about to tell him to uninstall Vista and install XP again. The XP users don't have this problem at all. I've looked around in the web and found some other users that have the same problem. But I found no solution for it.
View 9 Replies
View Related
Apr 1, 2008
I'm currently trying to connect my laptop which has Vista Business 32-bit to my Poweredge T105 which is running Server 2003 RC2. I get this error when running Network ID:
"Your computer could not be joined to the domain because the following error occured:
An attempt to resolve the DNS name of a DC in the domain being joined has failed. Please verify this client is configured to reach a DNS server thatcan resolve DNS names in the target domain."
The domain name I'm using is a live domain and worked fine when I connected my XP desktop to it. Not sure why it won't connect. Although it is on a different network (name) it can see the shared folder on the
View 9 Replies
View Related
May 22, 2008
I have tried just about everything to resolve this. Running Windows Vista Ultimate 64 bit and this occurs anytime I try to browse for computers or printers.
Network is set to "Private"
Network discovery "On"
File Sharing "On"
Firewall "Disabled"
LLTD "Installed"
I have read that I need to setup a DNS server, however, I never did this in XP and never had a problem browsing for computers/hardware. What am I missing? What services are necessary for AD?
View 9 Replies
View Related
Mar 23, 2008
Is it possible to create one rule to handle this rather than a rule for every user of that domain?
View 9 Replies
View Related
Jun 18, 2008
I need to go to a branch office and make several Vista machines members of our corporate domain (they were set up as stand alone machines because we did not a a VPN at the branch office, but now we do). When I make the machines members of the domain, what issues will I run into copying profile settings (documents, printers, etc) into their domain account from their non-domain account.
View 7 Replies
View Related
Dec 5, 2009
Windows Vista Ultimate 64; Office 2007 Professional Plus; Epson NX510 All in one Printer, is default printer under Printers. Will print test page and document saved on desktop. Will not print a saved or new doc. Document goes to "Not Responding" when print command is used. Do a esc to clear, then Print properties box opens. In drop down menu no printer shown, click on drop down menu arrow and printer is shown, highlight and click ok, nothing happens, does not enter it. Click on find printer get the following "Active Directory Domain Services is currently unavailible".
Do a quick print command, "Windows cannot print due to a problem with the current printer setup." Click ok, next window comes up "Print Setup" shows as No Default Printer, Printers list the Epson NX510 Series, highlight it but Set as Default Printer will not activate, (remains grayed out), click options- "Word cannot bring up the properties dialog because the printer returned an error"....
View 7 Replies
View Related
Aug 21, 2008
I've got a production network that I'm test Windows Vista x64 Enterprise on. I'm at my witts end with this problem: I add the Vista PC to the Windows domain. The computer performs the tasks and then tells me it needs to reboot. Upon rebooting it immeadiately drops itself from Active Directory (Windows 2003 SP2 R2 based domain).
Oddly, the computer account in active directory is still there. The Vista client drops itself, but the server side thinks everything is fine. What the heck is causing this? There are no issues with IPv4 connectivity. (We don't use IPv6...) The server shows that the PC and the users are connecting to the domain securely, and without issues (pass security audits). The Vista Client (Enterprise x64) just drops itself from Active Directory.
View 5 Replies
View Related
Mar 29, 2008
which edition of Vista is for networks and can be joined to windows 2003 domain?
View 4 Replies
View Related
Apr 22, 2009
I have 64 bit Vista Home Premium, can I connect to a domain. I see I can connect to a Workgroup, but I don't see a way to connect to my internal domain
View 4 Replies
View Related
