Does Kolibrie Software Have A Boot Manager, Can Hide From XP?
Mar 23, 2008
I am picking up a conversation that has been developing in a thread on another topic because I think it is signifacant and should get its own thread. Jawade of Kolibrie Software has been saying that his boot manager can effectively prevent XP volsnap.sys from erasing Vista's shadowcopies in a multiboot scenario. He has been trying a few things to verify this and hopefully he will join this thread and supply some info about it. So far he has verified that restore points and previous versions survive a reboot into XP and a reboot back into Vista.
During the Vista beta program several testers tried some well-known boot managers that were supposed to be able to hide a volume and either they did not function correctly with Vista or they did not hide a Vista volume at a low enough level to prevent XP from damaging Vista files.
View 7 Replies
ADVERTISEMENT
Apr 5, 2009
Is their a way to hide the dual boot screen unless you hit a certain key like f#?
View 4 Replies
View Related
Oct 8, 2009
I have a Dell Inspiron 530 Desktop and every now and then it won't boot up. I get a black screen with 'Windows Boot Manager' ," Windows failed to start. A recent hardware or software change might be the cause."
File: BootBCD
Status: 0xc000000f
Info: An error occurred while attemping to read the boot config data.
When I boot the PC with the Installation disc, it repairs it and it works until the next time. When I click on the details to see what is to be repaired, this come up:.......
View 9 Replies
View Related
Feb 6, 2009
I have a HP pavilion laptop which came with 64 bit vista ultimate pre-installed. I shrinked the OS partition (160 GB), created new partition (40 GB) for 64 bit windows 7 ultimate. After installation of Windows 7, I cannot see the vista ultimate boot option when I boot my PC. When I boot into Windows 7, I still can see the vista partition. But instead of C: it is now displayed as E: I used the HP Recovery Disc to repair windows vista but I can only see a blank blue screen with the mouse pointer. How can I recover the vista?
View 9 Replies
View Related
Jun 21, 2009
I was having problems with my pc freezing. Took it in for a diognostic and everything came back fine. They said it was a Vista problem.
So, I reinstalled the operating system disk and put windows back on the PC.
Now when I turn on my PC I get the Windows Boot Manager screen asking to choose operationg system to star with two versions of Vista to choose from. The first on the list is the rebooted (new) version. If I click on the second one, it is my old version with all my old files and programs.
Funny thing is, I am not having any issues with the old version any more.(YET)
Is there anyway to get rid of the rebooted (new) version windows so I can stop getting the windows boot manager whenever I start the PC? I rather keep using the version with all my old programs and files since it seems to be fine.
View 4 Replies
View Related
Mar 24, 2008
I ran XP, I installed Vista to the next partition, I want to eliminate XP,but the Vista boot MANAGER is on the XP partition. I tried hiding the XP partition, booting the Vista CD and doing a repair (twice) but when it boots, it tells me NTLDR is missing.
View 9 Replies
View Related
Mar 22, 2010
My boot manager appears to be in the D directory (Recovery). Does this mean that this programme is not available for normal use? what the function of boot manager?
View 5 Replies
View Related
Mar 30, 2008
I ran Diskeeper in Boot Time mode (2008v),and now my Boot manager is missing or corrupt I reinstalled the windows cd...went to repair section, System recovery options and hit Start up repair......it could not repair,........what are my other options....
View 6 Replies
View Related
Apr 11, 2008
about two weeks ago my PC started to display Windows Boot Manager everytime I
started the PC. This is a new PC and only has Vista Home Premium loaded and has never had any other OS loaded on the hard disk, so is not Dual Boot. I Have loaded EasyBCD and can find no problems there, see log below:.....
View 5 Replies
View Related
May 5, 2008
I'm stumped.... Whenever vista loads up, it brings the windows boot manager and makes me have to press enter to boot into vista. If I press tab, it gives me the option to get into windows memory diagnostic. How do I disable all of this to boot straight into vista without having to press enter? this is vista home. I tried all, looked around and nothing!
View 9 Replies
View Related
Jul 31, 2009
I have loaded a clean vista 64 install on a new system I built. Vista installs but when it is goes to reboot after the clean install it sayas bootmnger missing.
I have tried to repair using the vista repair tools from the vista cd and it sees my op sytem and says it has fixed the problem but when I restart same message?
View 9 Replies
View Related
Aug 17, 2008
Boot Manager Failed to load - ntoskrnl.exe. brand new to the forums but have been here for the past two days trying everything I can find to try and get my Vista Ultimate machine working again. I shut the computer off the other night before work, came home in the morning and rebooted... and upon loading got a black screen "Windows Boot Manager" coming up asking/telling me to "Repair" the computer. File: Windowssystem32 toskrnl.exe Status: 0xc000098. Info: Windows failed to load because the kernal is missing, or corrupt
I installed my vista disc and went through the repair... nada. I then tried a restore... nada... and now am at a loss. Is there a way to copy the file via the Command Prompt to the Vista drive from the dvd? Is it that simple (ha... I know... it never is)?
View 9 Replies
View Related
Jun 11, 2009
It says something in relationship with these words. Windows Boot Manager Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: boot_file Status: 0xc0000225 Info: Unexpected error has occured
View 5 Replies
View Related
May 29, 2009
From what I gather, sp2 fails to install due to GRUB being my boot manager. If anyone has found a work around...besides ditching Vista...share it. Unplugging a drive isn't an option...I have 5 OS's on 2 drives managed by GRUB. I believe GRUB was written to the MBR.
View 8 Replies
View Related
Mar 22, 2010
Every time I boot my machine (dual boot - 2 x vista 32 home Premium), the boot manager tries to take me into an incomplete, and unwanted, vista setup option which then hangs the machine. I want to delete that option from the boot manager but it doesn't appear in bcdedit, and that is about as far as my technical knowledge goes. how to get rid of an unwanted vista setup option from the bm?
View 5 Replies
View Related
Dec 13, 2008
I have re-installed windows vista on my machine and when i boot up it shows 2 vista installations... How do I get rid of the original so that it boots into vista without the boot manager message ?
View 4 Replies
View Related
Jul 9, 2009
Recently I had problems with my windows vista so i made a new one but now everytime i turn my laptop on, the windows boot manager comes up with two options, Microsoft windows vista or Microsoft Windows vista. The first one is the old one which doesnt work so everytime i turn my laptop on i have to press down to highlight the new vista option. Does anyone know how i can get rid off this boot manager so my laptop loads straight up to the new vista option.
View 5 Replies
View Related
Mar 23, 2008
When I've installed vista, the installation have set the boot manager to be on a different disk than the the boot loader. Now, if I want to remove the hard drive containing the boot manager, the system won't load, which is reasonable given these conditions, nonetheless I DO want to remove this hard drive and still be able to boot, therefore I've searched and queried everywhere and done the following: Physically disconnected the hard drive with the boot manager on it (d and boot with the Vista DVD to run startup repair -> this didn't help, the startup repair found the operation system but didn't recognize any problem, when trying to boot the system would not load, the error I'm getting when booting is disk read error occurred press ctrl+alt+del to restart.
(reconnected d:, and system boots flawlessly, then) I've manually changed the boot manger (and memory diagnostic, the only other bcd entry on the d: drive) location with bcdedit to c:, and now bcdedit (and VistaBootPro) show the boot manager (and memory diagnostic) in the c: drive, HOWEVER, if I try to boot from that drive I get the same error: disk read error.................
View 4 Replies
View Related
Jun 13, 2009
Im not really good with hardware and those stuff, so I just wanted to know..this programs like " Hide my IP " Does they really work? Have anyone of you guys tried them? (with a router/without) Can there be any consequences, etc?
and I have a router, wireless, Will these be a problem for me too hide my IP or change it with this applications. I know there is an tutorial but thats not what im looking for. Btw, if I change / hide my IP can I go in too websites that I was banned from ?
View 7 Replies
View Related
Aug 6, 2009
In XP I could use TweakUI to hide a disk drive from the kids and was still
able to use the hidden drive.
There is no TweakUI for Vista and I've tried to hide a drive with registry
tweaks(HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer)
and via command prompt (using diskpart). The problem is that both ways leave
hidden drives that are not usable. It's as if they truely do not exist.
View 9 Replies
View Related
Feb 13, 2009
I've run across a couple of applications (Avira Premium Security Suite, Spyware Terminator) that, despite choosing the "Always Hide" option for their tray icon, every time the computer reboots, they default back to "Hide When Inactive." Sure, it's a minor issue to set them back to "Always Hide" when I reboot, but is there some sort of tweak somewhere that will force these applications to remember the "Always Hide" setting, instead of defaulting back to "Hide When Inactive?"
View 9 Replies
View Related
Feb 11, 2009
There are some usernames that I do not want to be displayed on Vista Welcome Screen. I could not find a TweakUI for Vista to accomplish this. I googled and found a solution that concerned with the registry [HKEY_LOCAL_MACHINE SOFTWARE Microsoft Windows NT CurrentVersion Winlogon SpecialAccounts UserList]. I added the usernames[DWORD32:0] under the key, but the username still appears on WelCome Screen
View 5 Replies
View Related
Aug 29, 2008
How do i completely hide a folder so that no one can see it. I can't simply use hidden...
View 9 Replies
View Related
Feb 12, 2009
My alumni group website received an anonymous letter with invalid (fake ) address. This alumni group site is Membership Only. Members must provide valid e-mail addresses and nobody is to send messages to the group without membership and valid acknowledged address. So, my question is, how did this happen ? How did the message get through, and how did the sender use faked address and still be able to send the message out? We want to stop this.
View 9 Replies
View Related
Mar 1, 2009
I have a new Dell Vostro 1510 laptop running 32-bit Vista. When I open BlueTooth Settings > Options Even though the Show the Bluetooth icon in the notification area is unchecked, it still shows up. Is there another way to hide it in the system tray?
View 4 Replies
View Related
Apr 30, 2008
I am running a new Sony Vaio laptop with Vista Home Premium installed (no SP1 offered to me as yet). My question is not one for the Outlook newsgroup (I reckon) but simply as to the path in Windows Vista leading to the Outlook Address Book. I ask because it was my custom to back up Outlook Express daily on to an external hard drive by drag and drop. I would transfer to related address book in a similar manner. Having upgraded to Outlook, I am able to back up that folder daily in a similar manner. But when I find the new address book, in .csv format, it does not relate directly to the new address book that I have edited in Outlook format. My question is, put simply, is there a proper address book lurking away in the background that is invisible to me?
View 4 Replies
View Related
Nov 5, 2008
I am having a problem with Vista Home Premium 64bit, I have it setup to hide any inactive icons but it does not. I hvae ticked and unticked the option to hid inactive icons but this problem is still the same. I was wondering if any one on here knows how to fix this problem?
View 4 Replies
View Related
Jan 1, 2009
Sometimes when watching a video in vista media center, the screen control's won't auto hide. The mouse cursor also won't disappear like it should when mouse is kept idle. A reboot of PC fixes problem but I'm hoping someone has a solution other than having to restart my computer multiple times in a day.
View 1 Replies
View Related
Aug 12, 2009
except hiding Hidden+System files, of course.
View 9 Replies
View Related
Jun 29, 2009
I keep changing a Notification Area Icon to 'Show' but it keeps getting changed to 'Hide when inactive'. I do have the 'Hide inactive icons' checked. So what good does it do to be able to change the icon setting to 'Show' in 'Customize' if it keeps changing back? Any way to keep this icon showing without unchecking 'Hide inactive icons'???
View 9 Replies
View Related
Feb 27, 2009
How hide & display windows sidebar on desktop?
View 3 Replies
View Related
