about two weeks ago my PC started to display Windows Boot Manager everytime I
started the PC. This is a new PC and only has Vista Home Premium loaded and has never had any other OS loaded on the hard disk, so is not Dual Boot. I Have loaded EasyBCD and can find no problems there, see log below:.....
annoying pop up when the system tray is being loaded at boot up. This is the message. SiSTray has stopped working a problem has arisen .windows will close this program down and if the problem can be resolved windows will let you know. The computer works fine after this window is closed down.
View 7 Replies View Relatedwanting to add XP as an addl os using dual boot. I managed to get XP installed along with Vista home basic, but apparently messed up the boot sequence. I can can boot Vista, but not XP ...error window says file: tldr status: 0xc000000f the selected entry could not be loaded as the application is missing or corrupt
I used Vista Boot Pro 3.3 to set the booting. If I set VPR to install legacy booting, it will boot up with XP (no dual boot choice), but not Vista. If I select use legacy boot for selected drive E (XP), it says it is set, but a reboot brings me back to the error above. If I use VBR and set booting for Vista, only Vista boots. I have tried using the XP CD to do a repair install, but it asks for a password, which I never have set. When I hit enter, it keeps asking for password, then times out after the 3rd failed attempt. I only have the Vista backup CD (2 actually) from Dell, not an install Vista CD. My hd is a SATA, and I see that may be a problem by reading other threads here, but I have no floppy drive, only the cd/dvd. If I need another file which may be missing, can someone point me in the right direction ?
I have a Dell Inspiron 530 Desktop and every now and then it won't boot up. I get a black screen with 'Windows Boot Manager' ," Windows failed to start. A recent hardware or software change might be the cause."
File: BootBCD
Status: 0xc000000f
Info: An error occurred while attemping to read the boot config data.
When I boot the PC with the Installation disc, it repairs it and it works until the next time. When I click on the details to see what is to be repaired, this come up:.......
I have a HP pavilion laptop which came with 64 bit vista ultimate pre-installed. I shrinked the OS partition (160 GB), created new partition (40 GB) for 64 bit windows 7 ultimate. After installation of Windows 7, I cannot see the vista ultimate boot option when I boot my PC. When I boot into Windows 7, I still can see the vista partition. But instead of C: it is now displayed as E: I used the HP Recovery Disc to repair windows vista but I can only see a blank blue screen with the mouse pointer. How can I recover the vista?
View 9 Replies View RelatedI was having problems with my pc freezing. Took it in for a diognostic and everything came back fine. They said it was a Vista problem.
So, I reinstalled the operating system disk and put windows back on the PC.
Now when I turn on my PC I get the Windows Boot Manager screen asking to choose operationg system to star with two versions of Vista to choose from. The first on the list is the rebooted (new) version. If I click on the second one, it is my old version with all my old files and programs.
Funny thing is, I am not having any issues with the old version any more.(YET)
Is there anyway to get rid of the rebooted (new) version windows so I can stop getting the windows boot manager whenever I start the PC? I rather keep using the version with all my old programs and files since it seems to be fine.
I ran XP, I installed Vista to the next partition, I want to eliminate XP,but the Vista boot MANAGER is on the XP partition. I tried hiding the XP partition, booting the Vista CD and doing a repair (twice) but when it boots, it tells me NTLDR is missing.
View 9 Replies View RelatedMy boot manager appears to be in the D directory (Recovery). Does this mean that this programme is not available for normal use? what the function of boot manager?
View 5 Replies View RelatedI ran Diskeeper in Boot Time mode (2008v),and now my Boot manager is missing or corrupt I reinstalled the windows cd...went to repair section, System recovery options and hit Start up repair......it could not repair,........what are my other options....
View 6 Replies View RelatedI'm stumped.... Whenever vista loads up, it brings the windows boot manager and makes me have to press enter to boot into vista. If I press tab, it gives me the option to get into windows memory diagnostic. How do I disable all of this to boot straight into vista without having to press enter? this is vista home. I tried all, looked around and nothing!
View 9 Replies View RelatedI have loaded a clean vista 64 install on a new system I built. Vista installs but when it is goes to reboot after the clean install it sayas bootmnger missing.
I have tried to repair using the vista repair tools from the vista cd and it sees my op sytem and says it has fixed the problem but when I restart same message?
Boot Manager Failed to load - ntoskrnl.exe. brand new to the forums but have been here for the past two days trying everything I can find to try and get my Vista Ultimate machine working again. I shut the computer off the other night before work, came home in the morning and rebooted... and upon loading got a black screen "Windows Boot Manager" coming up asking/telling me to "Repair" the computer. File: Windowssystem32 toskrnl.exe Status: 0xc000098. Info: Windows failed to load because the kernal is missing, or corrupt
I installed my vista disc and went through the repair... nada. I then tried a restore... nada... and now am at a loss. Is there a way to copy the file via the Command Prompt to the Vista drive from the dvd? Is it that simple (ha... I know... it never is)?
I am picking up a conversation that has been developing in a thread on another topic because I think it is signifacant and should get its own thread. Jawade of Kolibrie Software has been saying that his boot manager can effectively prevent XP volsnap.sys from erasing Vista's shadowcopies in a multiboot scenario. He has been trying a few things to verify this and hopefully he will join this thread and supply some info about it. So far he has verified that restore points and previous versions survive a reboot into XP and a reboot back into Vista.
During the Vista beta program several testers tried some well-known boot managers that were supposed to be able to hide a volume and either they did not function correctly with Vista or they did not hide a Vista volume at a low enough level to prevent XP from damaging Vista files.
It says something in relationship with these words. Windows Boot Manager Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: boot_file Status: 0xc0000225 Info: Unexpected error has occured
From what I gather, sp2 fails to install due to GRUB being my boot manager. If anyone has found a work around...besides ditching Vista...share it. Unplugging a drive isn't an option...I have 5 OS's on 2 drives managed by GRUB. I believe GRUB was written to the MBR.
View 8 Replies View RelatedEvery time I boot my machine (dual boot - 2 x vista 32 home Premium), the boot manager tries to take me into an incomplete, and unwanted, vista setup option which then hangs the machine. I want to delete that option from the boot manager but it doesn't appear in bcdedit, and that is about as far as my technical knowledge goes. how to get rid of an unwanted vista setup option from the bm?
View 5 Replies View RelatedI have re-installed windows vista on my machine and when i boot up it shows 2 vista installations... How do I get rid of the original so that it boots into vista without the boot manager message ?
View 4 Replies View RelatedRecently I had problems with my windows vista so i made a new one but now everytime i turn my laptop on, the windows boot manager comes up with two options, Microsoft windows vista or Microsoft Windows vista. The first one is the old one which doesnt work so everytime i turn my laptop on i have to press down to highlight the new vista option. Does anyone know how i can get rid off this boot manager so my laptop loads straight up to the new vista option.
View 5 Replies View RelatedWhen I've installed vista, the installation have set the boot manager to be on a different disk than the the boot loader. Now, if I want to remove the hard drive containing the boot manager, the system won't load, which is reasonable given these conditions, nonetheless I DO want to remove this hard drive and still be able to boot, therefore I've searched and queried everywhere and done the following: Physically disconnected the hard drive with the boot manager on it (d and boot with the Vista DVD to run startup repair -> this didn't help, the startup repair found the operation system but didn't recognize any problem, when trying to boot the system would not load, the error I'm getting when booting is disk read error occurred press ctrl+alt+del to restart.
(reconnected d:, and system boots flawlessly, then) I've manually changed the boot manger (and memory diagnostic, the only other bcd entry on the d: drive) location with bcdedit to c:, and now bcdedit (and VistaBootPro) show the boot manager (and memory diagnostic) in the c: drive, HOWEVER, if I try to boot from that drive I get the same error: disk read error.................
I have recently been having many with my computer. Firstly, i was having problems with the SID where it says user profile cannot be loaded. After many hours i managed to fix this problem but i've recently got a new problem.
I Installed a new wireless network card into a pci slot and started the computer and it worked. As i hadn't had my computer working for a while i decided to update the video card driver and decided to check for updates for windows. I installed both the video card driver and windows updates and rebooted. But when the computer tried to start up all the fans started and the power light goes on but nothing happens.
I don't know whether the problem is with the new hardware, the driver update or the windows updates. The computer won't start at all and i have some important work on it.
My daughter purchased a Dell PC that has Vista 64 bit loaded. We didn't realize it was the 64 bit version until recently. Her problem is with IE. She has broadband access, but as soon as she drills down more than two levels, her browser slows right down. For some reason, it worked well and fast for about a month, but she recently rebooted her PC and it's s-l-o-w again. Has any else experienced this problem? Is there any way or reason to go to the 32 bit version of Vista?
View 8 Replies View RelatedIve been having problems with my laptop just recently, it was sudden! I had no problem whatsoever with it before, its an acer aspire 5630, ive never had major problems with it and its almost two years old! This is my first major problem, When i try to logon it says 'Profile cannot be loaded' Ive read everything possible on the internet from my desktop to try and find out what to do, most mentioned safe mode, this is another problem, my safe mode Does not work!
I can get into safe mode but as soon as i do it comes up with a black screen that says safe mode in every corner! Ive tried repairing my computer from one of the options listed with safe mode and it tells me it cant repair itself! this happened two days ago and i still have no idea on what to do, i use my laptop for school, it is very important that i get it fixed, im not sure if its something wrong with my laptop or windows, I have windows vista home premium.
Like many serious photographers my workflow is colour profiled so what I see on screen is printed, using separate ICC colour profiles for monitor and printer. I have done this for years. I now have a problem with Vista32 Ultimate SP1 where the monitor ICC file (correctly located in ...spool/color) and with the monitor color options showing my ICC and with "use my profile" checked -- it doesn't. The monitor profiling to generate the profile file runs fine and the result on monitor is great until I sleep/resume or reboot -- at that point my profile is briefly loaded and then "kicked out" as it reverts to native. I need to find a way to stop Vista doing this
View 5 Replies View RelatedI can't get by the login screen, message is "user profile cannot be loaded", seems all of a sudden it doesn't recognize my password. All I can do is shut the darn thing down and try again to no avail. Since I can't access anything how do I fix it.
View 3 Replies View RelatedWhen I bought this computer it had Trial Versions of several Microsoft programs. One was MS Office 2007. I've tried to remove this and some of the other programs, and I get the "error code 2755", and cannot remove them. Some are sizeable and I would like to recover the space.
View 9 Replies View RelatedI am new to Vista. How do I delete sewrvices that startup? I can delete programs but not services. I want to delete a backup program from loading at startup. It is not in the list of programs at startup as seen in Windows Defender. I miss mscongfig!!
View 5 Replies View RelatedI have a new Dell Studio 1535 laptop with Windows Vista Home Premium installed. After where it says 'Home Premium',it is blank. No 32 bit or 64 bit is listed. How can I tell for sure which operating system has been loaded on my computer?
View 5 Replies View RelatedI am new to Vista. How do I delete sewrvices that startup? I can delete programs but not services. I want to delete a backup program from loading at startup. It is not in the list of programs at startup as seen in Windows Defender.
View 5 Replies View Relatedi got a picture loaded on my profile now can't find it.. is the forum administrator responsible for that??
View 3 Replies View RelatedHow can I change the folder to which files are down loaded to in Vista?
View 9 Replies View RelatedI've been trying to install Vista Home Premium (clean install from Upgrade media) on my primary desktop for over a week with major issues. Most appear to be driver related on an nVidia board using nForce drivers for the SATA control. I installed using the default drivers that Vista loaded and had to deal with multiple hangs during installation. Finally got it installed only to have it hang during Win Update and blue screen, then fail to boot. Recovery was unsuccessful and so another reinstall was done. Next blue screen ended up with a "Corrupt or missing" error on ci.dll and absolutely no ability to reboot to Windows.
Decided I'd had enough and went to reinstall XP. Now I have issues with the drives being accessible to either XP setup or Vista setup. Tried loading SATA drivers and nothing worked. No drives visible........