I've been getting the same blue screen as early as attempting to load the Vista install PE environment from the DVD. Would like some specifics as to what that is pointing to. Initially, I had a bad stick of RAM. I have since RMA'd the RAM, and tested the new RAM. I'm not showing any errors with the new RAM. It does it irregardless of 64 bit mode, or 128 bit mode. It does it, when I add a second stick of RAM however.
View 5 Replies
I've been getting the same blue screen as early as attempting to load the Vista install PE environment from the DVD. Would like some specifics as to what that is pointing to. Initially, I had a bad stick of RAM. I have since RMA'd the RAM, and tested the new RAM. I'm not showing any errors with the new RAM. It does it irregardless of 64 bit mode, or 128 bit mode. It does it, when I add a second stick of RAM however. One stick = no problems!
View 5 Replies View RelatedDell Inspiron 1525, running Vista Home Premium. When turned on shows DELL start up screen with blue load bar. Load bar gets about 3/4 way and freezes for about 5 mins then goes to black screen, with no mouse cursor. Put vista recovery DVD in DVD Rom = same Tried F2, F8, F12, and ctrl alt del at start up before it freezes = same
View 5 Replies View RelatedI would like to check the memory for errors BEFORE I load/install Windows Vista Home Premium x64 to avoid install hang-ups. Can you make an ISO CD of this program, load it in your CD/DVD drive and check your memory for errors? I recently updated the BIOS on the board (DP35DP) and it does show all of the 4GB of Kingston ValueRam PC800 1.8v (2x2gb) installed. I have good reason to believe that it's from a respectable manufacturer. Just want to make sure the memory is good before I load up the OS.
View 9 Replies View RelatedI installed ActivClient 6.1 (CAC reader sw), on a Dell Inspiron XPS Gen2 laptop running Vista Ultimate SP1. When performing the suggested restart to complete the install, I received this error ""Windows failed to start. A recent hardware or software change might be the cause....blah, blah, blah...File: windowssystem32DriverspxHelp20.sys Status: 0xc0000098 Info: Windows failed to load because a critical system driver is missing, or corrupt."
I tried the Vista Repair option multiple times and though it indicated success, I still could not start windows. I then attempted to perform a restore from three separate restore points, each time it stated to reboot as if all was well, but returned the same errors with alternating bad files PxHelp20 or winload. I went to the Vista repair utility command prompt and attempted to run sfc /scannow, but was given "Windows Resource Protection could not start the repair service."
So my HP started acting up, it's dual boot XP/Vista. I used the boot recovery dvd's from HP to attempt to re-install XP. It caused a blue screen, and messed up the boot sector so I can't now get to Vista either. So after a few hours I finally gave up trying to save the data and went for a full recovery (reformat-install XP clean) that toolead to a blue screen So I finally get Vista to install fresh (wouldn't allow me to install w/my code, said I had to be in windows to use the code.) So I install Visa w/o a code, go to activate and says this had to be an upgrade! technally it still is! So I go to try to find an e-mail or ph for MS and they say $59 to talk to someone! That is BS! If I could get the boot recovery to work I'd go back to XP and never look at vista again! Is there anyway I'm going to be able to save this machine? I'm going to try to contact HP, but have little faith as it's over a year old now, but I'm sure they'd gladly sell me a boot dvd! I relize the first message was in the wrong group.
View 4 Replies View RelatedI am new to this forum so I hope you'll be patient with me. I have a MSI MS-163C laptop with 2GB of RAM and a Intel Dual Core Processor. I have received a copy of Vista Ultimate 64 Bit addition as part of my MAPS subscription and thought that would give it a go, my current version is 32 bit. I have researched and found that 3 to 4GB of RAM is recommended for 64 bit so I purchased 2 x 2GB sticks from FutureShop [Buffalo DDR II / 667mhz PC2 5300 However, anytime that I install any more than the 2GB already in the computer the computer goes to a "Blue" crash screen and I can't go any further. I checked the ram that is in the computer and they are 1GB sticks 667mhz, pretty much the same. If I take both of them out and install just one of the 2GB sticks the computer seems OK, but even if I install a 1GB with it to make it 3GB it crashes again. I am trying to determine for myself it this might be a BIOS problem or what,
View 4 Replies View RelatedSo my HP started acting up, it's dual boot XP/Vista. I used the boot recovery dvd's from HP to attempt to re-install XP. It caused a blue screen, and messed up the boot sector so I can't now get to Vista either. So after a few hours I finally gave up trying to save the data and went for a full recovery (reformat-install XP clean) that too lead to a blue screen So I finally get Vista to install fresh (wouldn't allow me to install w/my code, said I had to be in windows to use the code.) So I install Visa w/o a code, go to activate and says this had to be an upgrade! technally it still is! So I go to try to find an e-mail or ph for MS and they say $59 to talk to someone! That is BS! If I could get the boot recovery to work I'd go back to XP and never look at vista again!
Is there anyway I'm going to be able to save this machine? I'm going to try to contact HP, but have little faith as it's over a year old now, but I'm sure they'd gladly sell me a boot dvd!
my system is vista business sp2 32bit , about a mouth ago after i installed ubuntu 9.10 , it randomly shows blue screen , today it happened again , the detail about one them is below: i did not have any hardware problem before ,
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.256.6
Locale ID: 1033
Additional information about the problem:
BCCode: be
BCP1: 837020B7
BCP2: 28EA0860
BCP3: 8BB63A18
BCP4: 0000000E
OS Version: 6_0_6002
Service Pack: 2_0
Product: 256_1
Files that help describe the problem: C:WindowsMinidumpMini020110-01.dmp, C:Users afisehAppDataLocalTempWER-50060-0.sysdata.xml, C:Users afisehAppDataLocalTempWER8304.tmp.version.txt , Read our privacy statement: Microsoft Online Crash Analysis
Am running Vista 64 Business on XFX 680i Sli LT with 2Gb ram, Quad core 6600, 600GT video. System runs fine, but I want more memory to help performance. When I try to install additional 2Gb, I get a blue-screen every time I boot (some blue screens have an IRQL_NOT_LESS_THAN_OR_EQUAL, most have no error msg). Is there a way to determine if my installation of Vista already has this installed? I've already checked the Control Panel/Windows Update/Review Update History, it's not in there, I thought it may be in the core install on the DVD?
View 9 Replies View RelatedI was thinking about re-installing vista to fix my blue screen problems, and a few other problems that have been going on with my computer lately. I have the installation disc for the same os I'm using now 32 bit vista home premium. If i create a partition in my hard drive and put the folder/files/media i want to KEEP on that partition and reinstall on my current one. will they the files be accessible and i can just copy them back to the new re-installed vista?
View 9 Replies View RelatedWhen I boot my computer with Vista 64 , I always get a blue screen with the
following error message :
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
If this is the first time you've seen this Stop error screen, restart your
computer. If the screen appears again, follow these steps :
Check to be sure you have adequate disk space. If a driveris identified in
the Stop message, disable the driver or check with the manufacturer for
drivers updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updated. Disable BIOS memory
options such as catching or shadowing. If you need to use Safe Mode to
remove or disable components, restart your computer, press F8 to select
Advanced Startup Options, and then select Safe Mode.
Thecnical informations:
*** STOP: 0x0000007E (0xFFFFFFFFC0000005, 0xFFFFFA600117F603,
0xFFFFFA6002D84ED8, 0xFFFFFA6002D848B0)
*** fltmgr.sys - Adress FFFFFA600117F603 base at FFFFFA600115C000.
DateStamp 47919082
Same thing with Windows 7. But, with Vista 32 bits DVD, no problem. I
suspect my DVD burner to be the problem, since it make the hell of a noise
at the startup with Vista 64 an Windows 7 DVD's.
Thank you.
I seem to be getting a blue screen error and crash on Vista Ultimate 64. Can't figure out what it is exactly, It has happened while using firefox and IE. But no common denominators. So far I am using firefox now without a crash, but it has crashed 3 times. I also saw a pop-up about task manager not working after one of the crashes.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 1a
BCP1: 0000000000004000
BCP2: FFFFFA800856D250...........
I have the blue screens problem. I'm not good with computers but a friend of mine told me that vista and webcams hardware are sometimes the problem to the blue screens and I also noticed that it happens when my webcam is open, I have vista 32-bit Operating System. This is what happens: The blue screen appears ( my blue screen is weird because usually theres a lot of text that comes with it but mine is just all blue with nothing on it) after the computer restarts itself.
View 4 Replies View RelatedBusiness with SP1
Sony laptop, fast core2duo, 4GB
Defender+Avast!
Working beautifully for many months, and then a few
weeks ago this began happening:
Perhaps 2-3 times a week, and with no consistency of circumstances, a blue screen will appear. It might happen while working or when returning from hibernate. There's a countdown as memory is stored, and then a freeze. The only way to recover is to do a hard OFF (5 seconds on the power switch) and restart. When it first happened, I had not installed or changed anything, so I was comfortable doing a restore. It happened again.
It's confusing because the stated cause is inconsistent. I've checked to ensure that all drivers are updated and nothing that's contraVistarian is installed. What analytical steps can I undertake to discover what's causing this, and then to help me make the necessary changes?
This never happened for a couple of days but as I started updating Vista, the Blue Screen Error has been occurring. the Problems Center in Vista advised me to update to SP1 because it said that this issue has been resolved in the latest service pack. After updating, the problem is still here. When i boot Vista up its normal, and operates perfectly. But when the issue of putting my computer on sleep or shutting down/restarting, the Blue Screen appears and restarts my computer so i
have to resort to turning it off manually.
i bought myself a new hard drive 500gb sata 2 and i have Vista Home Basic..I tried to do a fresh install of Windows on the new drive and the windows seems to load ok until it gets to the end of installation and my machine just restarts over and over and wont load windows..just before it restarts everytime you can just see the "blue screen of death" for a second before it restarts...any clues? Also i tried to do a fresh install over my old hard drive and that wont work either..after it says loading windows files..i get the blue screen again
View 9 Replies View Relatedim new to this forum, my computer is running fast but for some reason recently its taking a very long time for the web pages to load up, it starts up quick and everything but i think it might be something ive done, it might be something simple, i recently cut out stuff from the STARTUP menu so its quicker on loading and ive done disck defrag and cleanup and all that, can someone tell me if ive deleted something or what to look for, im running AOL, it was ok before but was running a little slower than normal, its running fast now it just the web pages wont fire up and when i click on a link again it takes a long time, the blue bar does not load at all then suddenly about a minute or so later it loads really quickly,
View 8 Replies View RelatedProblem Blue Screen. No new hardware or software installed recently, last Windows vista update was on 01/15. When I start first, PC passes user registration (boots fine) and
does the normal stuff like loading software and starting the wireless internet connection via Netgear, opening some windows/programms I will close. All normal, but than comes a Blue Screen and very fast shut down of system with restart. Hardly can read the message...Look like Blue Screen appears when to much action is going on like opening of IE and Outlook... or open to many windows... or some bad programm/hardware is booting. But when I restart, restart gives a different blue screens and trouble is much earlier or directly after registering to the system.
But all starting or booting turn slower, real slow now. Start in --safe mode with net working-- the PC works, but the PC can't handle heavy workloads, is really slow in action. I cannot open --My pictures-- to see all picture files displyed on screen (2.7 GB) (the process trying to access the files in safe mode is real slow) and when I attempt to transfer the file to a USB stick, the computer is stopping in middle of action (after 50% transfer)..........
I've been doing a clean install of Vista x64 for about a week and have been getting many random blue screens of deaths yesterday I did another clean install and only had about 4 drivers or so installed and I got a BSOD but no dump file was created for some reason so I kept installing more drivers and it work for about 4 hours till it crahsed again this time it gave me a dump file so here are the results.......
View 5 Replies View RelatedI got me a Nvidia Nforce 4 SLI mobo with the Nvidia MCP chip and Vista hates this chip. Anyway, I have installed the Vista Ultimate package 64 bit and 32 bit at different times...both choke badly. I finally set the whole thing aside for many months and decided to come back to it after the OS got some patches and tweaking. Well now I tried it again and still, with all the patches and upgrades...hot fixes and such...still blue screen of death after BSOD.... always it comes back to the MCP and I am getting tired of messing with this, when windows said "Your machine is compatible for Vista!".
View 4 Replies View RelatedI'm trying to install Forsaken on Windows Vista 64bit and the screen just blacks out after the intro messages. It works fine on XP even though its an old game. I've tried right-clicking on the .exe files and setting compatability to Windows 95, 98 and 2000 and nothing changes. I used to love this game, does anyone know how to get it working?
View 4 Replies View RelatedI've had voltage issues causing my computer to freeze or reboot during games and dvds. Fixed that and the computer was fine after memtest showing no problems. That was late Dec.
A few days ago, the computer would go to a blue screen saying it's dumping physical memory and then automatically reboots. Thinking my harddisk might be collapsing on me (I have a seagate barracuda 7200.11 500Gb HD with the SD15 firmware, the infamous crash friendly HD), I flash the HD with the SD1A firmware from seagate, then it was fine. 2days later, Catalyst started to cause problems by not responding, so I formated the drive and reinstalled vista ultimate, along with Catalyst, drivers from Mobo manufacturer ASUS, plus a couple of other softwares. That was yesterday, and now I'm getting the same blue screen back, or the computer just freezes.
I have installed Vista x32 with SP2 Ultimate. When I installed anti-virus, BSOD came. Same AV version haven't problem with Vista SP1, what is updated to SP2. Then I try to install Vista with SP2 to hyper-v server, but installation stops immediately error screen (STOP: 0x0..8E). Is n_windows_vista_ultimate_sp2_checked_build_x86_dvd_342432.iso packet ok ?
View 9 Replies View RelatedEverytime i try and install sp1 for vista ulitmate 64 bit i allways get a white or black screen when it reaches installing stage 2 of 3.
View 9 Replies View RelatedI commonly get a blue screen. So how do I solve this problem 2ndly, whenever I play music on my WMP, the computer may just hang on me, giving all but zzzz buzzes and the whole screen shows lines.
View 4 Replies View RelatedProblem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 3081
Additional information about the problem:
BCCode: 1000007e
BCP1: C0000005
BCP2: 98DD3A3D
BCP3: 8837B8FC
BCP4: 8837B5F8.......
My one guess is its something to do with the display driver maybe because that has been stuffing up a bit of late, in the way of the screen going black for a couple of seconds then recovering.
I have vista buisness, and it won't load. I have to restart at least twice and restart it via safe mode. I am a real noob when it comes to this so please forgive this novice question. Does anyone have an idea whats wrong with it or a route i can take to attempt to find out whats wrong? It gives me a black screen and won't load for a while. I noticed after i posted someone on this forum had the same problem. Are there any updates to that problem?
View 9 Replies View RelatedI turned off my computer yesterday then turned it on again and switched it off again using the power switch repeatedly yesterday in a span of a few mins. I then went out for a day and when i came back home and tried to boot my computer again vista wouldnt load the login screen. I changed my loading screen and it gets past that alright but when it gets to the logon screen everything just turns black?
View 7 Replies View Relatedmy windows vista home will not load to the login page. it all started when my computer would not shut down. as it wouldnt i pressed the off button left it for a couple of mins and turned it back on again. it came up saying that there was a problem and i selected to have it automatically fix the problem. it said it could take a few times for it to work. on the second try it said it could not fix the problem and gave option send message to windows.....
View 4 Replies View RelatedAbout six weeks ago I had an issue with my computer that seems to be related to an update downloaded at that time. I had Automatic Update set to download and install updates automatically and after one such update, the computer instructed me to restart which I did. All went well until I logged in. The log in screen came up, I logged in and hit enter and the desktop started to load...and froze there. I restarted in safe mode and system restore failed. I called Dell and they walked me through diagnostics until they were fairly sure that it was not a hardware problem. I finally got it to reboot from the Windows disk that came with the computer, but the problem persisted. No error message, no lights, no beeps. Just frozen at the same place at the same time. In addition, each time I had to hold the power button down to reboot, my RAID array would have to 're-verify' the data on both disks which would take about 4 hours before I could even think of doing anything with the box.
Finally Dell had me restore the system from a partition on my hard drive which reset the computer to how it was from the factory... It worked fine till I downloaded the updates again. The last bunch included a Vista security update and a bunch of Office updates. I had to Factory Image reinstall again. I have now shut off my Auto Update. It tells me that there are updates to download, but I have not done any of them in the last month........
