Buisness Start: Black Screen And Won't Load
Jun 19, 2008
I have vista buisness, and it won't load. I have to restart at least twice and restart it via safe mode. I am a real noob when it comes to this so please forgive this novice question. Does anyone have an idea whats wrong with it or a route i can take to attempt to find out whats wrong? It gives me a black screen and won't load for a while. I noticed after i posted someone on this forum had the same problem. Are there any updates to that problem?
View 9 Replies
ADVERTISEMENT
Mar 18, 2009
my windows vista home will not load to the login page. it all started when my computer would not shut down. as it wouldnt i pressed the off button left it for a couple of mins and turned it back on again. it came up saying that there was a problem and i selected to have it automatically fix the problem. it said it could take a few times for it to work. on the second try it said it could not fix the problem and gave option send message to windows.....
View 4 Replies
View Related
Oct 16, 2009
Dell Inspiron 1525, running Vista Home Premium. When turned on shows DELL start up screen with blue load bar. Load bar gets about 3/4 way and freezes for about 5 mins then goes to black screen, with no mouse cursor. Put vista recovery DVD in DVD Rom = same Tried F2, F8, F12, and ctrl alt del at start up before it freezes = same
View 5 Replies
View Related
Mar 24, 2009
Every time i try to start Vista it gets to the black screen with the progression bar and Microsoft Corportion under it and it doesnt go pass that point. I tryed to fix the startup wit the vista disk and it said fixing boot errors but it ran for over 24 hours and didnt do anythings.
View 4 Replies
View Related
Dec 20, 2009
i am running a acer am1201 and i have a problem with my gts 250 1 gb oc but i get the acer screen with the f10 and f2 but after that it goes to a black screen and sits there for like 45 secs and then it goes to logon on screen wich takes like 2 seconds after it starts to load again and pic shows up just wondering what i can do about this
View 5 Replies
View Related
May 2, 2009
I recently got a virus on my dell laptop so i decided to do a system restore to an earlier date, this fixed the problem. Then as an option a message popped up asking me if i wanted to install windows service pack so i clicked yes, so as the laptop was shutting down it was installing the service pack but unfortunatly in the process the laptop was switched off by mistake. Ever since i have tried to do a recovery and tried starting windows normally but either way it ends up with a black screen with the message.
!!0XC0190036!! 603/76439 (CAPILOCK.DAT) and it just stops and freezes at this point.
View 5 Replies
View Related
Jan 1, 2010
When I start my computer, it would load fine until the loading green bar. After that screen, my computer would have a black screen for 15 or so minutes until the screen for the password shows up.
I've disabled nearly everything in startup in msconfig, did a restore to manufacture settings the day before to try and solve this, but it didn't help.
I have:
Dell XPS420
3.00 GB RAM
32-bit operating system
Number of processor cores 2.
View 9 Replies
View Related
Mar 6, 2009
my laptop has been having some problems running, so i was in the process of repairing my compter when i ran into a problem. my laptop was set to hibernate (which i find out now is a stupid idea due to the problems) but anyways, now when i try to start it up my bios screen isnt the same (where i can select it to boot from a cd/dvd) those options arent there, and ive tried hitting the keys but nothing happens...
when it gets past the opening screen, it stays stuck on a black screen with a small cursor int he top left corner... and i have no idea how to get out of this or anything... it will stay on this screen untill i try and restart my comp by hitting the power button... and when i hit the power button it turns off right away, when my computer is on i have to hold it in... so is there anyway to hard start bios? or vista? or am i going to have to connect the hard drive to a diff computer and try and fix it that way?
View 6 Replies
View Related
Mar 15, 2008
I have a problem with this graphic card, when I run a game with better graphic details. My computer freeze for 2-5 second, next is black screen for 2seconds(as monitor is shuted down) and next is black screen while i don't stop the game. Next I see this-> I hope that you solve my problem(and see that image) BTW: if this problem was solved on this forum sorry, but on system instantForum i was never been and i don't know how it control. Or if this post is in bad category please send message for me when you move it.
View 9 Replies
View Related
Mar 26, 2008
I have been asked by my company to evaluate Vista Buisness for use in our company. All of our laptops are purchased from HP and as of a few months ago come with Vista OEM licenses so licenses are not a problem. But as soon as we receive a new laptop it is imaged with XP removing the original windows vista installation and recovery partition. So we have no copy of Vista oem. Does anyone know a place I can download Vista OEM, (Note I only want the files don't want a pirate copy) which I can use with our OEM key.
View 4 Replies
View Related
Mar 24, 2008
I am building a new system and have a new copy of Vista Home Premium 32bit.
I got it all put together and tried to load Vista. It got to the Windows is loading files screen and then screen in getting black video. Keyboad and mouse stopped working at times. So I updated the board BIO's per intel through iso image and same thing. So I tried installing XP and got to the F8 screen to accept lic. and it just reboots everytime.
Any ideas why Vista would stop? Added the info about the XP install so it may help.
System:
Intel D975XBX2 mobo
Corsair 2048MB PC6400 DDR2 800MHz DHX
BFG GeForce 8800 GTX OC 768MB PCIe
Intel Quad Core Kentsfield 2.4Ghz Q6600 CPU
SoundBlaster xFi XtremeMusic
500GB SATA/300 Baracuda
Siteck Eclipse keyboard
Logitech G5 laser mouse
Viewsonic VX924 LCD
Lite-ON 20X DVDRW SATA LH-20A1S-12 Super-Multi Int
Masscool 8WA741 CPU FAN w/Heat Pipes 775
View 9 Replies
View Related
May 19, 2008
my windows vista home premium doesnot start up completely It stops when it has to load the sidebar and the programs that are in the start up file like my virusscanner After a few minutes it automatically continues the start up and loads all programs which are in the startup folder I just bought this vista and it worked fine I dont know what went wrong I disabled all start up folders and services but I cannot locate the problem
View 5 Replies
View Related
May 14, 2008
I have recently bought a new PC running Windows Vista Home Premium. I have loaded the above programs for my son and when they a running the screen is not centred and the is a black bar to the right of the screen approx 3 cm wide. I have tried to run the games in compatibility mode and as adminstrator as recommended with other games but with no success.
View 7 Replies
View Related
May 2, 2009
I am having a very wierd issue with vista's screen saver. So basically when I leave the comp idle it goes into screen saver then turns off the monitor after 15 mins. Sometimes, more often than not, I come back and move the mouse and hit a few keys on the keyboard and nothing. The monitor wont come out of standby I try turning it off and back on, and nothing. I have the latest drivers for everything in my system and I checked the power management settings and they both are able to wake the computer up. I have a G15 keyboard and I keep the leds on and when this happens the leds are off and the lazer for the mouse is off too.
View 5 Replies
View Related
Nov 13, 2007
i went into my HDD and scheduled an error checking..well windows loaded as normal, but no error checking occurred i guess...now after the green bar is done, the screen hangs on a black screen.
View 7 Replies
View Related
Nov 19, 2009
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 3081
Additional information about the problem:
BCCode: 1000007e
BCP1: C0000005
BCP2: 98DD3A3D
BCP3: 8837B8FC
BCP4: 8837B5F8.......
My one guess is its something to do with the display driver maybe because that has been stuffing up a bit of late, in the way of the screen going black for a couple of seconds then recovering.
View 4 Replies
View Related
Oct 5, 2009
Why do I get black picture after I have pressed PrtSc button? Of course it shouldn't be black and it happens only when the screen is on full screen mode (for an example videos, games etc.). It also doesn't matters if I am using just PrtSc or Alt + PrtSc - the result is the same. It looks like this ---> http://img525.imageshack.us/i/blackba.jpg/ (and, no, I didn't painted it black).
View 4 Replies
View Related
Feb 3, 2010
I have a Toshiba laptop with 2Gb Ram, running Vista. I have no major problems, but my pc does seem to take a long time to start up and to load / run large files, and sometimes seems to go into a coma. I use CCleaner and Defraggler, and I uninstall/delete anything that I dont need. But my pc does seem to be struggling sometimes. I could add another 2Gb Ram, or I could upgrade to Windows 7 (which I read has much lower overheads??). Or perhaps I should buy a new PC? My question is, how do I decide what the best route is??
View 9 Replies
View Related
Feb 17, 2010
i had a vista home premium, without any problem, for a while. yesterday my anti-virus detected a suspicious file located in c:UsersuserappdataLocalTemp and i allow it to delete mentioned file. after a restart windows start up couldn't be completely done and instead of log in screen, i faced with a black screen just with mouse enabled on it!! however windows boots in safe mode correctly. i have already tried start up repair but it didn't solve the problem!
View 5 Replies
View Related
Jun 6, 2009
I turned off my computer yesterday then turned it on again and switched it off again using the power switch repeatedly yesterday in a span of a few mins. I then went out for a day and when i came back home and tried to boot my computer again vista wouldnt load the login screen. I changed my loading screen and it gets past that alright but when it gets to the logon screen everything just turns black?
View 7 Replies
View Related
Mar 23, 2008
I've been getting the same blue screen as early as attempting to load the Vista install PE environment from the DVD. Would like some specifics as to what that is pointing to. Initially, I had a bad stick of RAM. I have since RMA'd the RAM, and tested the new RAM. I'm not showing any errors with the new RAM. It does it irregardless of 64 bit mode, or 128 bit mode. It does it, when I add a second stick of RAM however.
View 5 Replies
View Related
Nov 14, 2009
On start up lately, the computer freezes, goes black, and tower unit beeps.
Unplug it and start up in safe mode, then back to normal start up OK.
First time, all Norton definanitions gone and Vista defender shut off. restored them,
all OK.
Tried to back up files and got i/o device error (Ox8007045D)...
View 9 Replies
View Related
Jan 30, 2010
windows seems to boot up partially but does not get to the log-on screen and instead goes to a black screen and all you can see is the arrow shaped mouse pointer and thats all. I put the windows cd in to try to repair the installation and booted from that but still the same thing happens
View 6 Replies
View Related
Apr 21, 2009
Alrighty I went off to work with my pc turned on a few days ago, I come back and the screen is black and nothing I do is responsive to the screen. I then reboot the Pc it leading to a blue screen. Some times when I reboot it will blue screen some times it will just be a black screen that is un responsive. I have tried f8 options in advance boot optiotns, Ive tried re installing windows- it claiming my disk is full. Ive tried system restore it also says I have a disk failure. It wont let me check errors in the properties options on my hard drive. I have done a virus scan(no virus's) and I have 300gigs left of space.
View 8 Replies
View Related
Jul 21, 2008
is that when he tries to delete some files that he previously stored in the C:"Account Name",he gets a message saying that the file is unavailable in the specified location.However,that is not my main problem now,because when I was trying to help fix this problem I typed "msconfig" into the RUN box to get the startup utility box and I unchecked some of the background programs to prevent them from loading automatically when the system starts,in order to speed up the system;but when I restarted the system I can see the first screen, which is by the manufacturer of the labtop;then when vista starts loading, the screen becomes black and don't display anything,although I am sure that Vista is loading successfully but I cannot see it on the screen.
I am assuming that one of the programs that I have unchecked is responsible for displaying. I have tried to do a repair installation by using a bootable Vista DVD but I couldn't because I cannot see anything on the screen.I tried logging in on safe mode but that did not work either. How can I undo the changes that I have made to startup utility.
View 5 Replies
View Related
Jun 12, 2010
I have two users set-up, user K (with Administrator rights I believe and a password) and user N. If I login as user K, after I enter my password my computer will run for a bit (I can see/hear it logging in) but after a few minutes the screen goes black except for my white cursor and nothing else happens. If I then hit ctrl-alt-del I can see the Task Manager and switch users to user N which will start up normally and give me access to my desktop.
View 4 Replies
View Related
Jun 27, 2009
I have tried installing many different games on my pc, which are quite new and have been released in the last few years. The installation goes fine, and everything is great. When it comes to launching the game, well, i double click the file to run the game, and i get a black screen. Nothing happens afterwards. It just stays black. 'Ctrl + Alt + Delete' does not work, and neither does 'Alt + Tab', or any other keyboard shortcuts. This results in me having to hold in the power button and turn my pc off like that.
Any idea's on what could be wrong? It is extremely frustrating, due to the fact that i've tried running about 3 - 5 games on my computer, and neither of them work, without a black screen coming up after trying to launch any of them. I've tried numerous things like 'Running as Administrator' and changing compatibillity modes and so on and so forth, but none of that works.
View 9 Replies
View Related
Apr 26, 2008
I was having a weird problem with my screen going black at random after installing any version of Vista, and kept having to force a restart because there was no way to get the screen to come back on. I searched all the forums and it seemed to be very common, but as with most of the forums everyone was argueing about how to fix the problem instead of helping the people with the problem. So I'm posting this one in the hope that it may just help one or two people with the same problem.
My remedy was simply to update the BIOS to the latest version P32 I think from the XFX website, and the problem was no more, I also updated the High def audio driver from the same site, now my machine has been running flawlessly for three days now.
View 3 Replies
View Related
Jan 18, 2010
I was hoping that some of you guys could help me with a problem. As the title says, my screen goes completely black after the loading screen with the green loading bar, but before the usual windows vista circle is supposed to appear. I have also tried to use a vista x64 recovery disk. Here I only get the blue background a mouse I can move around on the screen, meaning I have no options to choose from. Does anyone know what the problem might be? And if so, how to possibly fix it?
View 9 Replies
View Related
Jun 18, 2008
I have Vista Ulimate 64-bit and everytime that I reboot I get a black screen before the Microsoft Windows scrolling bar.
This is the sequence.
- I reboot.
- I get my bios information screen.
- I get the white, blinking line in the upper left corner of the screen.
- Then the screen goes black with no hard drive activity.
I then can perform a Complete PC restore from my second partition on the same SATA Hard Drive and I will then be able to boot into Vista with no problem.....until I reboot, then I get the Black screen again. It is a vicious cycle.
I have tried to remove video cards (2 x 8800 GTS), memory (4 GB), sound cards (X-Fi Music), load the default bios settings....nothing works. Only a Complete PC Restore cures it, but only until I need to reboot the PC.
View 9 Replies
View Related
Oct 8, 2009
I run Vista HP/SP2. The other day after various installs, updates and maintenance tasks I ran with no problems and ended the day by putting my laptop into hibernate mode. The next day when I powered on, my system would not come up...my system disk C: was corrupt. I finally got System Repair to run and it appeared to fix and recover my C: disk to the point that I can see my files still exist via Recovery command prompt. However when I
restart, my screen goes and stays blank (black) with my cursor usable but to no purpose. I tried System Repair again but it tells me it can find nothing to repair. I tried starting in safe mode and it loads two screens worth of windows files before going to a blank (black) screen with my cursor usable but to no purpose. The last windows file loaded is a crcdisk driver file.
View 9 Replies
View Related
