Is there a way to get Vista to automatically change power setting plans depending whether a laptop is on mains or battery? I want to run mine on high performance when plugged in but on balanced when using the battery. I know I can manually change which plan to use, but surely there must be a way to get Vista to recognise which power supply it is using and change settings accordingly.
View 5 Repliesis there any way to show the power plan in tray like in winxp so i can change between plans (balanced, power saver...)
View 7 Replies View RelatedHi! I've just gotten a new Vista machine after having XP Pro for a few years. So far, I've had no difficulties and am qvery pleased with perfomance etc., with one exception.
In XP, the moment I pulled the plug on my laptop, it would switch power plans to my "battery" one (i.e. darken the screen, change how it shuts down and so forth.)
In Vista, when I pull the plug, other than the screen going darker, nothing happens. I'm told that I'm still in "High Perfomance" mode, which could affect battery life.
So how do I tell my computer that when I switch to battery, it's to change plans to Power Saver automatically?
Many of the guides on this forum recommend setting the Vista power plan to "High Performance". After some research, I've found that the Balanced Power Plan is equal, if not better, in performance while also saving power. Instead of copy everything over to this thread, I recommend you read my info here: Power Plan Controversy - Notebook Forums and Laptop Discussion
View 5 Replies View RelatedI recently purchased a HP 6180, Intel Core 2 Quad 2.5ghz. 6 gig of ram, 1333 fsb. Here is my problem. I purchased a Corsair 750 watt power supply to run the new video card I just purchased. I believe in installing one thing at a time and test it to make sure all is well. (I have not installed the video card until I get the power supply Issue resolved first). The power supply was a pretty basic install. When I start the system everything runs ok until windows starts to load. The black screen with the little green night rider bar then the system shuts down. I went into cmos and looked for adjustments and tried a few and no luck. I ran the diagonistics for the processor and hard drive and ram. All checked out ok. The power supply is working ok, otherwise I would not be able to do anything. Every time windows vista 64 home prem goes to boot the system shuts down and then restarts. I tried the reload f11 tool and no luck. As soon as I reinstall the 300watt stock power supply back into the computer, everything works fine.
HP is sending me recovery disks or something, but I don't think that is the problem. Maybe if I reload windows with the new power supply installed it will work.
Is there a definitive description of the Vista Power Management options? Something like a system adminstrator description of all the options and what affect each change will have.
View 4 Replies View RelatedI'm on a Toshiba Satellite that's worked fairly well except for a few self-repaired hiccups. However, about a week ago my power management plans suddenly stopped working. I can switch from different plans that change how quickly my display turns off, but my screen has been stuck at the lowest brightness possible for a while now. It has nothing to do with the plans themselves, I've restored all to their default settings and still no change in brightness when I switch between all of them. The little slider to adjust
brightness simply does not appear anymore. I can't find what exactly it is that's malfunctioning to reinstall, as no power management driver appeared on my disk from Toshiba. Can anyone provide an explanation or perhaps a link to repair this?
After three months of failing to make two Vista Business PCs network via a crossover cable, I gave up and I now have the following:
A Netgear GS605 (5 port) ethernet switch. To this switch, I have connected two identical Vista PCs (call them A and B), and a Livebox.
Computer A connects to the Internet perfectly well via the Netgear switch to its attached Livebox; computer B connects to the Internet using a wireless connection to a different Livebox.
However, the PCs can not see each other.
On computer A, all I can see is "Network", "Access: Local and Internet". The network map shows "This computer->Gateway->Internet".
The network is Private On computer B, I see the wireless network (Private) plus "Local Area Connection", "Unidentified Network", "Access: Limited Connectivity".The Local Area Connection is Public and will not stay Private when I change it. After a short time, or a reboot, it reverts to Public.
I recently bought a laptop with VISTA. My software will not run on it. I have contacted the seller of the software and they do not plan to modify their software to run on any platform except XP. I did buy XP and install it on the laptop. My program does run, but many of the basic PC functions do not run properly. even the mouse pad and keyboard acts very erratic. It is driving me crazy! I am ready to give up and buy a different laptop. When I look for one via Google, all I get are ones that run VISTA or 7. I would be willing to even buy a used PC. I need a reputable source. I need around 2GHZ and 3MB. All the basic functions PLUS XP. I am not a gamer.
View 4 Replies View RelatedI purchased the business version of vista from Windows marketplace, then I performed an anytime upgrade to Ultimate, now I would like to change to vista 64 but I don???t have a disk and I am not sure that my current key will work. I called Microsoft about obtaining alternate media (64 bit disk) however they informed me that I couldn???t get a dish through the alternate media plan because I bought from marketplace and not a retail canter. This is nuts to me. There must be some reasonable way to get a 64 bit disk in which my key will work without purchasing an entirely new version of vista. I mean dang I paid a ton for this, and now with me still playing fair they won't send me a 64 bit disk or let me purchase one for a minimal fee. Surely there must be some avenue I have over looked.
View 6 Replies View RelatedI need to use C:WindowsMicrosoft.NETFramework64v2.0.50727jsc.exe very hoften from cmd console.
I don't remember how you set up so that I don't need to write the whole path each time I wanna access this program
How can I prevent Vista from automatically shutting down after a given period of time? I like to listen to online audio all day, but not necessarity while working on the computer.
View 5 Replies View RelatedI use a laptop at the office and at home. My problem is that Vista won't update its network settings automatically when I change from one network to another. Per example, my office network has 192.168.0.0/255.255.255.0 addresses and my home network has 192.168.1.0/255.255.255.0 addresses. When I arrive at home and the computer connects to the network, it keeps its 192.168.0.0/255.255.255.0 address, which of course results in limited connectivity. I have to use the Repair tool each time to get the connection back (and it means waiting for a looooong minute in front of the computer...)
View 9 Replies View RelatedI created my folder pair, but SyncToy doesn't do anything unless I manually go in there and tell it to sync the pair up. I am upset it won't the sync without waiting for me. As long as the computer is relatively idle, sync away.
View 5 Replies View RelatedI have just recover my window vista business. But i don't know why the IE7 always opens automatically. Many times i cancel it but it still opens again and again. The possibility of having virus if very low because i have just recovered the window.
View 4 Replies View RelatedAnyone know if its possible and if so how to prevent Vista from keeping the message balloon of "Automatic Updates is off" from popping up?, each time I reboot after a few minutes this pops up and its irritating me, I don't have automatic updates on as I choose when to go and check for any, but this message will insist on popping up to remind me, but I'm not daft and would like it to know if its possible to stop it
View 3 Replies View RelatedI've noticed that my computer automatic shut the computer off and I was
wondering if somehow that I might have set up in my computer somewhere
without realizing it.
Can anyone help me on this?
I'll be reading something and before I know it, the computer turn it self off.
I turned it back on and it works fine.
Does anybody know how I can set a scheduled restart to occur regularly overnight.
View 9 Replies View Relatednow i know there is an automatic way of backing up files and folders using windows vista but i was wondering if there was a way of automatically backing up my complete system. now i've tried using Acronis True Image for this but i'm afraid that i won't be able to restore if my boot drive gets corrupt or i don't have an OS to installed Acronis to and load the back up image.
View 9 Replies View RelatedI can only retrieve my mail at start up. I can't get mail when I click on Send/Receive or automatically. I only get an error message when I click on Send/Receive...no other time. It says that an error has occured and to check the details below...but there is nothing below.
View 9 Replies View RelatedUnder vista I no longer get an address or selection of possible addressees after typing in several characters of the recipient's address. I was told previously in this forum that this would happen after I entered the addressee's name three times. I've done that many times over and still no auto recognition.
View 9 Replies View RelatedI am using Vista x64 on my Laptop. The Problem - Vista Automatically logs me off, if i am inactive for 2 minutes (it brings me on logon page - and asks me to enter password) I have checked -
- Control Panel
- Screensaver settings
- Power Settings
- Searched on google
But could not find anything there. Can someone tell me, how can we set auto log off idle time in Vista :o ? Enable or disable this function?
I just left a job and want to leave an automatic message to my former clients that they need to contact someone else. How do I do that?
View 6 Replies View RelatedDoes anyone know a freeware program that can convert multiple dvr-ms files automatically to wmv or avi? My Playstation 3 can play media from my Vista desktop computer. Unfortunately, it can not play the dvr-ms file type Media center creates.
I record multiple TV shows on a day. Vista windows movie maker can convert them from dvr-ms to wmv, but can convert 1 file per project. Converting takes very long, so if I have to convert them manually 1 by 1, it takes too much time.
What I would like is to have a program that can convert multiple dvr-ms files simultaneously or through a automatic waiting list. Just like Windows media player can do with MP3. You place a CD in your computer, choose which songs you want to convert to MP3, and media player converts them automatically 1 by 1. You don???t have to do anything else.
How can I send a automatic notification when I'm on vacation or away for a couples days? I'm using windows mail.
View 7 Replies View RelatedI'm running Vista Home Premium. I have the Vista defrag set to go automatically on the first day of each month at 9 PM. The settings are correct on screen. However, it says next scheduled defrag = never, and the automatic defrag does not occur. I have to start it manually each month. I do not know what is wrong, nor how to fix it.
View 5 Replies View RelatedVista Ultimate. For some reason, when booting, Vista is automatically logging the computer on as Administrator rather than to my account. I then have to "Switch User" and log the administrator out. This is a pain the the hind portion of my
body.
I am running Windows Vista Home Premium and connect to the internet via a wireless router (Sky). I installed MSE a couple of weeks ago, but upon checking yesterday I found that it actually does not update (automatic or manual), instead it gives me the error message "Virus & Spyware definitions update failed. MSE was not able to check for updates - make sure computer is connected to the interned and try again", even though I am clearly connected to the internet (actually using it whilst trying to update MSE).
Having read your forum I uninstalled MSE, used a clean up tool to remove any potential remainders of previous anti-spyware programs and re-installed MSE. Initially the virus update worked fine, scanned the laptop and thought problem sorted. This morning, out of interest, I tried to update the virus definitions again, just to see if it works, but no, I am now getting the same error message again...also, for quite some time now, when Windows informs me that there are updates available and I try to install these I get an error message, plus I can't log into Messenger either?
The other day I recieved a automatic update, so as normal I accepted it since then IE8 does not even load. Things I've tried: Tried to uninstall IE8, but can't find it in "Remove programs" Tried to system restore, but won't allow past the download date Tried Re-installing it, but keeps giving me a error message "you have a newer version already installed on system"
View 8 Replies View RelatedThis is my 4th Vista install on this box in a week and a half. This time I failed to uncheck the "activate automatically" box after I entered the key. Checking System, it says I have 3 days before automatic activation. How do I kill that? - if this one flies, it won't be ready for at least 5 days.
View 5 Replies View RelatedI have gone to "Control Panel" and selected "system" and turned automatic update to automatic and set a time to that it should happen at every day. I have also gone into "Security Center" and tried to turn it on, but it says error:1058 and won't let me. I've even gone onto windows.com to scan computer for updates, but won't allow me to without having automatic updates on. And then it gives steps of how to do so. clicking on START and clicking RUN typing in services.msc to change all 3 things of what it says to to get automatic updates to turn on. NOTHING HAS WORKED, I've defragmented and cleaned disk for the computer, upgraded my virus/ spyware software and tried lookin up for solutions and haven't found any.
View 5 Replies View Related