4 Gigs DDR3 Ram Showing At 2 Gigs In Vista 64
Dec 15, 2008
I have a really weird issue, here are the details.Firstly, as stated in the title i do have Vista 64 bit. Recently bought 2x2 Gig DDR3 1600 (corsair TW3X4G1600C9DH) with timings 9-9-9-24. My motherboard is an Asus P5Q3 Deluxe. This chipset (Intel P45) has know issues with DDR3 running at higher than 1066, but this has supposedly been rectified with a BIOS update which i have flashed, so not sure if that is relevant as my problem is not speed related.
Under system properties the ram is shown as 4 Gigs but in task manager it says: Physical Memory, Total: 2046. The usage graph shows about 1.1 used and is just over half-way full. Not sure if this is valid but i have a pre-release SP2, not sure if this could cause such a problem. CPU-z shows both modules are there, but shows total 4 gigs, however Everest only shows 2 Gigs. Screenshot below, hope this is not too big, but theres a lot of info to squeeze in.
View 9 Replies
ADVERTISEMENT
May 16, 2008
(1) Would i be able to run some sound cards in vista x-64 with greater then 4 gigs of ram....lets say 8 gigs of ram?
View 6 Replies
View Related
Aug 4, 2009
I wanted to know if I can use 4 gigs of RAM on Vista 64 as opposed to 8 gigs? I will be using this rig mostly for gaming. I haven't had any luck finding two 4 gig packs of memory locally unless I spend a lot of money. Could I use four 2 gig sticks of the same mfg? I am hesitant not to use bundled memory if I want 8 gigs.
View 9 Replies
View Related
Jun 2, 2008
I am have vista 64 bit premium and i have a asus m2n-sli deluxe with a 1.02 Bios Will i need to update the bios before install of vista? i also will useing 8 gigs of ram. ty for any tips and advice
View 4 Replies
View Related
Apr 14, 2010
So, just wondering. I have 4 gigs of Ram (1 x 2 Gig stick and 2 X 1 gig Sticks) My Board is listed in my Specs (And yes i grouped the two single gig sticks together on the same channel thing.) So i was wondering why it shows up as 3326 MB Instead of just 4 Gigs. My Buddy says its a Binary thing and the way that the computer reads the Ram, but my Task Manager says the same thing too, and i just want to make sure that this really is just a cosmetic thing. Here is a screenshot of some stuff.
View 4 Replies
View Related
Oct 12, 2009
When i bought my system it came with 4 gigs and Vista Home Premium x64.I had many compatibility issues with games and programs so i then putUltimate 32bit on it. Now i would like to put another 4gigs of ram on mysystem and just wanted to make sure that it would accept more. I plan onputting windows 7 x64 on it shortly. It has enough slots for 8gigs ofram and was originally a 64bit system.
View 9 Replies
View Related
May 29, 2008
I think this is a bios update thing - although I can not get an update from msi as their update thing doesn't support 64 bit os. Here's the poop. Windows will boot with 1, 2, and 3 one gig modules in all different combos but when I stick in the 4th it doesn't even get to post. However, when I take out the cmos battery, then replace it along with the 4 gigs installed - it boots, but with a beep and a post that says bad checksum and something about setting the clock. If I select go ahead with the default settings it boots right into windows and things are sweet. But from there if I reboot I'm back to square 1. If I select at the post thing (f1) to go in to change the clock - then f10 out, I'm again back to square one.
View 7 Replies
View Related
Nov 9, 2009
so i have an E-machines T5082, i upgraded the Ram, put a better Graphics card in it, the like A few years ago after tinkering around with some weird stuff that i didn't understand, my drive got smaller. After looking around i learned that i had partitioned it or the like, so i deleted the partition and the drive went back to normal. A virus later took hold and the partition thing happened again.
Long story short, for some reason, i am missing 11 Gigs from my HDD, and i KNOW its not Windows Vista taking 11 gigs. I mean, in My Computer, its reading my HDD as 149 GB instead of 160 like it USED TO. How can I get back these 11 gigs, WITHOUT reformatting or anything like that?
View 4 Replies
View Related
Apr 19, 2009
im going to be putting another 4 gigs of ram into my machine when I get my new motherboard. I am going to need to upgrade from Vista Ultimate 32bit to Vista Ultimate 64bit. I know there's no native support to just upgrade, so I was wondering if someone knew the easiest way to do this. I especially don't want to have to reinstall my programs and games, so is it possible just to back up my program files and copy them into the new program files folder? Also, is there any way to transfer the registry information? I know the registry's won't be compatible, but is there some sort of 32 to 64 conversion method?
View 6 Replies
View Related
Jan 3, 2009
I know the machine I have upgraded to vista 64 bit ultimate is not the ideal machine to do this on.. But I am going to eventually upgrade the hardware thats slacking. I cannot get my pc to work with 8 gigs of ram. Tried 6, no luck.. only 4 gigs will allow the system to boot. I get an alert saying the system memory has increased when I have all 8 gigs snapped in, press the required key to continue then the screen goes blank, tried waiting a little to see if OS would load, but no dice. according to www.crucial.com, my pc will support 8 gigs. I have gone to dells support page and there are no vista drivers available
View 6 Replies
View Related
Apr 28, 2009
I am running vista 64 bit with 12 gigs-intel i7 cpu 965, and it is only showing 8gb in system props but when I do a cpuid test it shows all 12...i have tried flashing bios and just about everything to get it to show without luck. I was hoping someone had something similar and could share the fix.
View 6 Replies
View Related
Apr 2, 2008
it may be because I got the one with all languages in it, but do they all require 9 gigs to install on the windows partition? and if they do, is there a work around? I only made my vista partition 25gigs.
View 4 Replies
View Related
Nov 29, 2008
I have a 320 GB HD. When I checked it, I only have 25 gigs of free space. However I can only find about 180 gigs of files/data. Any ideas as to how I lost 100 gigs of available of space? Just a couple of weeks ago I checked and I had plently of space. No recent installs, only recent changes are the removal of Mcaffee monitoring software and running JkDfrag.
View 9 Replies
View Related
Sep 15, 2009
is it best to run ddr3 dual or tri or does it not make any diffrence
View 9 Replies
View Related
Mar 27, 2009
Has anyone seen any decent 4gb DDR3 modules out yet?
View 9 Replies
View Related
Apr 12, 2008
right now ddr3 is a lil bit better than ddr2 but its so much higher in prices.
View 4 Replies
View Related
Mar 23, 2008
Is anyone else having problems installing this speific KB937287 update?
I am unable to get it to stop showing up in my 64-bit Vista UE's Windows
Update even though it was a success. All other today's updates were fine
except one (KB937287 failed) and then rebooted, but now KB937287 keeps
showing up even after successful installs.
View 9 Replies
View Related
Apr 22, 2008
So I just bought my 2nd Evga 8800gt card Superclocked Edition. I tried running SLI with it and when I enable SLI, I'm only getting 10 fps on 3dmark06. When I disable SLI, I'm getting a much higher fps running just 1 card. Is it some bug with Vista x64? Does anyone have any idea why this might be happening? I've tried everything from reinstalling the drivers to reinstalling the cards themselves. Both cards show up in my device manager and both are bridged. I can't figure out why this is happening.
View 6 Replies
View Related
Oct 27, 2009
I just noticed on my fairly new HP laptop that Windows Vista Home Premium 64 bit with SP1 is showing double listings for most of the installed programs in Programs and Features (ie the Add or Remove Programs in XP).What is wrong, what is the cause, how can I fix it?
View 7 Replies
View Related
Mar 26, 2008
Is anyone else having problems installing this speific KB937287 update? I am unable to get it to stop showing up in my 64-bit Vista UE's Windows Update even though it was a success. All other today's updates were fine except one (KB937287 failed) and then rebooted, but now KB937287 keeps showing up even after successful installs.
View 9 Replies
View Related
May 10, 2008
my computer showing white screen. I maybe turn it on and a few minutes later it's completely white. Sometimes it showes first stripes, black and white. I've googled it but not found much so I went here to ask. For about 2 months ago I had problem with BSOD but re-installed Vista and it was OK. My computer is Packard Bell SB87 (something like that, not sure) and with Vista Home Premium.
View 7 Replies
View Related
Apr 18, 2009
I wonder why my Windows Vista Business is showing Servive Pack 3 as I only installed SP1 last year?
View 6 Replies
View Related
Apr 27, 2009
I just bought my 'puter a few days ago and it had this problem. If anyone is still having this same problem, here's how I fixed mine...Start > All Programs > Accessories > System Tools > Disk Cleanup Then just check Recycle Bin and run the program.
View 0 Replies
View Related
May 18, 2008
I just installed an additional 2gb of RAM on my system, but this is not showing in the Task Manager. It iniitally was not showing in either, but after installing SP1 Sys info was updated.
View 4 Replies
View Related
Oct 17, 2009
I have 6gigs of DDR3 memory at 1600hz. Running on Vista 64bit and every now and again my memory performance just maxes out. The problem can occur around the time when I am installing something but I dont think its always this way. I have read forums where it could be the hardrives performing self diagnostics. I have all the latest patches for vista.
View 7 Replies
View Related
Jun 16, 2009
I have Vista without sp1 and installed the updates of 2007/2008 and I don't see the sp1 in WU. How does it show? How do I check if I have sp1 installed? I do not want to download the 434MB standalone pack, is there a solution?
View 9 Replies
View Related
Feb 26, 2008
i was away for a long time so i do not know exactly what happened but the wife had let me know that the cd she had put in for my son was not playing so i aske her to look at "my computer" to see if the dvd icon was there but no. so i told her to go to device manager and uninstall which she did then restsart the computer. On restart the computer said installing driver for new hardware but it failed..have tried other ways of deleting then reinstalling but still i cannot use the cd/dvd drive..have even gone down the route of purchasning a new dvd writer but that did not work. by the way error code is" Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
View 9 Replies
View Related
Sep 22, 2008
When I connect my Epson CX3200 printer to a PC with XP o.s., I can see the ink levels in the properties window. Wen I connect to a PC with Vista o.s. I am unable to view any ink levels.
View 9 Replies
View Related
Nov 17, 2009
I have a laptop running vista and all my documents and pictures and music folders are showing as empty.. I removed the hard disk connected it to a test bed and run treesize and try to explore "my documents" but telling access denied or showing it as empty.. I donot want to take the risk of doing a restore as there were important files on there..
I am going to try to run it on safe mode and see and also check the folders options as whether it is not on hidden files.
View 9 Replies
View Related
Mar 23, 2008
Why doesnt my CD/DVD drives show up in My Computer?! Everytime I reinstall VISTA it appears, but after a while theyre not there? And when I put XP on the machine, it never happens. Only in VISTA, first I thought theyre not supported but when I first install VISTA theyre there...then as I said...give it a month and they dont show up and when I put a disc in nothing happens and I cant even type in their location ex. D:/ WHY?
View 6 Replies
View Related
Feb 12, 2009
My friend is having an issue long distance and can't see what's going on but is having a problem His DVD drive is not working. What happens is that it is not showing up under "computer" and will not read any disks of course. What does work is when we go to device manager it is listed, but has a yellow warning under it. The drive did work before, but no longer does. Any ideas? He really needs the help and I did everything I could.
View 8 Replies
View Related
