I have my ethernet cable connected right now, but I can't even load my wifi connections at all. I live in apartments so everyone around me has wifi and my phone and iPad is clearly connected, but it won't load any connections.
View 3 Replies
When I turn on my Toshiba Satellite laptop, it does not see my i-phone hotspot. Wi-Fi status says "No Wi-Fi connections available". I always have to turn the hotspot off and then back on after the laptop is up and running for the laptop to find it. This does not happen with my desktop. It sees the i-phone hotspot without the need to cycle the hotspot off and back on, so I'm thinking that it has to do with the Toshiba rather than the i-phone. Both laptop and desktop are running Windows 8. Not a big problem, but I thought some one may know of a setting which I need to change.
View 3 Replies View RelatedThis problem occurs unexpectedly. I usually use my laptop to connect to WIFI in our school then suddenly i cannot detect any wifi connection even bluetooth disappear.
View 9 Replies View RelatedMy fully updated Windows 8.1 notebook suddenly will not show any wifi connections when I click on the icon in the system tray (it shows "No Connections are Available", although it is connected, and I can surf and browse normally).
To connect to a new network, I have to manually enter the details of the network, and then it connects. This is something new, since previously it would show all the available networks, and allow me to make a selection (which is normal). What setting could have flipped do enable the above situation?
So after I upgraded to 8.1 I have been having internet connectivity issues, it says Im conected fine but cant load any web pages. So I ran trouble shoot and this is is what I got back. (See below). Sometimes troubleshoot will fix it other times not, this time it did.
Issues found :
The default gateway is not available
The default gateway is not available
The default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
[Code] ......
I have a tiny wireless piece from realtek that my dad had bought. This piece was working fine up until recently. I had built my own tower and put the piece in there from our old one.. All has been working up until now. Now when I turn on my new tower the wifi connects but does not work. No browsers load and none of my services are working. It also messes up the wifi connection for the other devices around. My sibling will be using their laptop playing something like WoW and when I power up my tower the lag hits. From time to time it will drop my laptop's internet connection entirely. However, this is not the case recently. The router we use is a linksys e2000.
Every now and then the pages load but they are slow and blocky. My dad says it is usually caused by a loss of packets but I did the packet test in cmd and only had a 1% loss.
My 8.1 laptop shows multiple network connections to my Samsung Smart TV --- One as "media connections" and 3 as "other connections". Both devices are on a simple wireless network using Linksys WRT54GS.
Under the "Network" page, most of the "Properties" of the TV connections are the same except for "Serial Number" and "Unique Identifier". Did I do something wrong when setting things up? Are these extra connections harmful? Should I delete some? How?
My computer has 2 wireless cards and a gigabit ethernet port. I have my own internet and my neighbors each allow me to connect to their internet. If I were to set the Wi-Fi to connect to theirs, and the ethernet to connect to my internet would I be able to take advantage of the extra bandwidth?
View 1 Replies View RelatedI am having a problem with bridging my connection I have been online look around and I could not seem to find anything that has worked ok basically I have 2 connections I want to bridge together but after is done bridging no bridge appears under network adapter settings ?
View 4 Replies View RelatedSo I just got a custom built computer with Windows 8.1 installed on it, When I go to settings > Networks, It says No Connections are Available, every other device in the house has connection to our WiFi.
View 4 Replies View RelatedOn my Toshiba laptop (I've only had it since the 8th of August) under Networks it says, "No connections are available". I was playing Diablo3 and then it suddenly said not connected to battletnet. That is besides the point, but I think I might have hit something that turned the wifi off. After failing to fix it with a system restore it blue screened saying something about an error and collecting a data and that it was going to restart itself. Then it said to get more information or something like that the error code was MEMORY_MANAGEMENT. After restarting I thought it was still messed up (it showed no networks available in the lock screen) then I logged on and it still did. Then it showed I was connected to WiFi again, then after leaving for a few brief minutes it was back to no connections available. It did the blue screen thing again and restarted.
View 3 Replies View RelatedI'm trying to create a shortcut to "Control PanelNetwork and InternetNetwork Connections". I am not able to. Is there something about going to this folder that is forbidden?" If I have inserted the incorrect path please give me the correct answer.
I am preparing a lesson and a short cut to the adapters will make it easier.
So I've set up my desktop PC to function as a portable WiFi hotspot for my other mobile devices. First I used the Cmd Prompt to create a sharing network, but since I had to open that every time I started up the computer, I switched to using a program called MyPublicWiFi (1 click setup).
However, in the last few days, my WiFi connection was getting kind of buggy. (No internet connection with my phone while I was connected to the WiFi network, etc)
Just now, I looked at the Network Connections, and there are 3 LAN connections that weren't there before. (picture: [URL] ....) Are they part of the problem, and how do I remove those networks?
I'm trying to set up VPN to connect immediately upon startup.
I decided to try setting up my VPN in Windows itself, instead of using Open VPN as before.
This is the Windows VPN functionality that's available from the Metro themed interface and . But it's so dumbed-down that I can't even see what type of VPN connection this actually is.
If this connection if PPTP or L2TP? Or something else?
Whichever it is, is that connection considered to have integrity or is it more or less cracked?
Live Tiles missing. I recently refreshed my comp. as i had issues with my live tiles as you can see in the link above. And now none of my tiles connect to the internet. I checked my connections, which is fine.
I keep getting a constant error msg saying that the tiles cannot be displayed as there are no internet connections available.
I user FTP & Telnet a lot to connect to devices on our LAN.
With Windows 8 I've been using ZoneAlarm as my firewall as I found Windows Firewall caused a 5 -10 second delay in every FTP / Telnet Connection.
Last night I upgraded to Windows 8.1 and ZoneAlarm no longer works, so I'm back with the Windows Firewall and the delay in connections.
I've ensured the APPS I use have access via the firewall and they do connect and work fine... but after establishing the connection there is a 5 - 10 second delay in the connection. With ZA this was all instant..
I have a new Dell laptop with Windows 8.1 - I work from home & connect to the internet via my home wifi network. The problem I have been experiencing is that my laptop connects to the internet at boot up but then disconnects for several minutes & then re-connects again. This coincides with the Network & Sharing Centre showing a number of Local Area Connections (numbered 3,4,5,6 etc) being created under Unidentified Public Networks. I have tried disabling the LAC's but they re-enable whenever I re-boot & I have the same issues again. My networking knowledge is very limited so how to rectify this issue.
View 9 Replies View RelatedThe computer turn off the wireless connections and defaults into airplane mode. I had this problem with Windows 8. The option to easily toggle airplane mode on and off become grayed out unchangeable. The only way I found to temporarily fix the problem was to rightclick the airplane icon and then troubleshoot the wireless connections which would then turn wireless back on. I had the option to upgrade to 8.1 and I did and it fixed the problem for a while. It did happen again which is why I'm back on the web searching for possible more permanent solution for this. Luckily it only happened once a week ago and hasn't happened again. I was wondering if this bug was known about and if you possibly know of a way to fix.
View 3 Replies View RelatedIs there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies View RelatedThis ONLY happens to the windows 8 and none of my other computers, this happens to a lot of people and on other forums they say "Change your MTU, set subinterface "Wireless Internet Connection" mtu=1492 store=persistent" but that DOESNT work, It says theres bad syntax even though i type it the exact same way I see it. what is "Wirelesss Internet Connection" ? do I put the name of my connection? How do I know if 1492 is the right number?
View 6 Replies View RelatedI just checked in my device manager and found and new device installed that I didn't install. It's a WAN miniport (Network Monitor) #2, which has the yellow triangle and exclamation point in it. Windows can't laod drivers required for this device. (code31)
I don't have any wireless hardware on my PC. This was installed on 5/15 and I believe it came with the last the 8 auto updates (18 of them I think) because the dates match. It wont update through device manager, it wont uninstall.
When I ran a video with subtitles in Windows 7 over RDP, the video worked perfectly but my subtitles didn't load. But when I played the same video in Windows 8 over RDP, they did.
Is there something...different about Windows 8's RDP that allows this to work?
Basically, whats happening is, it says connected to the internet, however, it won't load any site. We've attempted this on Internet Explorer, Firefox, and Google Chrome. The weird thing is, we have found that she can connect to sites by using the site's IP, but not with the actual address. Also, Skype is working perfectly fine with the connection. Its just, web addresses that cause a problem.
Running on Windows 8 and her computer model is a Satellite c55-A and the processor is intel(r) core(TM) i3-3120m cpu @ 2.50ghz 2.50 ghz. The manufacturer is Toshiba.
Also, this was a problem encountered on any router connected to. However, if we can not get this solved, will resort to attempting to restore to factory settings.
I've got a new desktop which is connected to my house wifi using an USB adaptor. The signal quality is constantly at 5 bars but I find myself frequently having to refresh multiple times whenever I load a new page on the browser either because it's not loading or pictures or not showing. Pages become near impossible to load when i am downloading stuff(torrents, upgrades, games etc). Also noticed other computers in the house are also affecting mine when they are in the process of downloading files. Torrents, updates all make it impossible for me to browse the net. Pages literally refuse to be loaded at all whenever something is downloading. I also have to infrequently refresh pages even when nothing is downloading because it's not loading or pictures are not showing. None of the other computers are affected however.
Any program that requires an internet access is also struggling to get connected. I had to use direct links to install certain programs such as Adobe reader/flash. It's often impossible to check for updates in programs or even sign on to clients like Steam/Origin which requires a connection. I had to try for ages before it signed in online but it's still having trouble loading images and such.
What is strange however is that I'm having no issues holding a connection when downloading bigger files such as direct downloads, windows update, steam game downloads and torrents. No drop outs that I've noticed. But it is faily slow averaging 400kb/s.
Everything else in my house including my laptop, another desktop, ipad and phone works fine. No issue browsing the net while downloading.
Wireless is connected through an USB adaptor pluged in to the back of my desktop. I've tried two adaptors (ASUS USB-N13 and Linksys AE1200) and both of them runs into the same problems. Running windows 8.1 and using ESET NOD32 as an antivirus with the windows firewall turned on. Desktop specs are as follows:
CPU: i5 4670K
Mobo: Gigabyte GA-Z87X-UD3H
RAM: G.Skill Ares F3-1866C9D-8GAB 8GB (2x4GB)
GPU: EVGA GeForce GTX 780
SSD: Samsung 840 EVO Series 250GB
HDD: Seagate 2TB
OS: Windows 8.1
This is extremely frustrating and has never happened with any other computers I've used before.
I just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies View RelatedI purchased a new Windows 8, Inspiron 15 7000 series - 7537 last December. I had been using a router at a hotel for the time, and it worked correctly. When I arrived home, I had a Belkin router, and i experienced network issues in that i could not connect to the wifi. I could connect with Ethernet cable. The problem was fixed through customer support eventually, but I now have a new Comcast router, and i'm experiencing what appears to be the same or a similar issue. I can access the internet fine by wire. With wifi, it says i have access to the internet over the internet icon in the bottom right, but i cannot access webpages. I can use skype, and communicate through it.
Here is the result from the ipconfig /all :
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
[Code] .....
I really need the wifi on this router working for this laptop. Let me note that it works on other laptops, so it should be an issue with hardware or settings on this laptop.
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
I prefer to keep my home WiFi network from public view by disabling the SSID broadcast, i.e "hiding" the network.
With two modem/routers (a Belkin Play Max F7D4401 ADSL modem/router and now a Cisco EPC2325 DOCSIS modem/router) on two computers (home-built desktop and Acer TM8172T notebook), after the initial connection Windows 8 Pro would not reconnect without tediously re-entering the SSID name and password. Once it does connect, it displays the original SSID name with a new one with an incrementally increasing appended number like:
I was manually deleting them all (except the original) using netsh, until I realized you can <right-click> on an entry in the screen above and choose "Forget this network."
This is the process I go through each time to re-connect. Is there something I'm missing?
I read that if Windows 8 saves too many WiFi connections, it cannot "remember" them to automatically reconnect to them, so on the notebook, I deleted all but wpcTrue (the original), and it now automatically reconnects, although occasionally it will add a new connection with an incrementally increased number -- currently the notebook shows both wpcTrue and wpcTrue 2. I had used the notebook on the road, so had about five WiFi connections saved. On the Desktop my home network is the only WiFi connection I've ever made. However, no matter what I do on the desktop, it NEVER remembers to automatically log on when the SSID is not broadcast.
I even tried manually setting up a connection via Network and Sharing Center > Set up a new connection or network, to no avail -- the desktop computer will not automatically reconnect.
I doubt that this is relevant, but the Belkin modem/router, the Belkin USB adapter I use on my desktop computer, and the notebook's Broadcom internal modem are all b/g/n. The Cisco modem/router is b/g.
If I "unhide" the SSID, i.e. broadcast the SSID, all is well in the world. Both computers automatically reconnect to the modem/router. If I hide the SSID, and then disconnect or reboot, the desktop computer will not automatically reconnect.
I just noticed that the pop up WiFi connection column shows "WiFi-2 Off" -- what does the "Off" mean?
And, why is it "-2" ? My notebook just shows "WiFi', period. (The first image with "WiFi (Off)" was from a previous Windows 8 installation on the desktop computer. I decided to change from EFI-boot to non-EFI so reinstalled Windows 8. I simply used the old image as a quick way to show how the connection name assignment runs away.)
How can i create local WIFI network without having internet access on my pc. This seems to work if I have access to internet but when i disconnect internet connection my PC ( virtual router ) cannot see anymore other devices..
All other devices that are connecting to my virtual hostednetwork are working without any problems expect my pc. What have i missed that my PC where virtual hostednetwork is running cannot see devices in "virtual" network without internet access?
My ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so:
- WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar.
- Under the wired network properties IP Version 4, I manually set addresses to be
IP 192.168.10.1
Subnet 255.255.255.0
Gateway 0.0.0.0
Laptop B has only a wired network, set to
IP 192.168.10.2
Subnet 255.255.255.0
Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
I want to forget a Wi-Fi network from my network list i windows 8.1 . But when I right click on that network (to forget that network) nothing happens i.e. right click menu does not open.
View 6 Replies View Related
