Network / Sharing :: Computer Connects To WiFi But Does Not Load Browsers
Feb 23, 2014
I have a tiny wireless piece from realtek that my dad had bought. This piece was working fine up until recently. I had built my own tower and put the piece in there from our old one.. All has been working up until now. Now when I turn on my new tower the wifi connects but does not work. No browsers load and none of my services are working. It also messes up the wifi connection for the other devices around. My sibling will be using their laptop playing something like WoW and when I power up my tower the lag hits. From time to time it will drop my laptop's internet connection entirely. However, this is not the case recently. The router we use is a linksys e2000.
Every now and then the pages load but they are slow and blocky. My dad says it is usually caused by a loss of packets but I did the packet test in cmd and only had a 1% loss.
View 3 Replies
ADVERTISEMENT
Jul 9, 2014
i have a lenovo idea pad that will connect to wifi but says limited connection. I can use the iternet via ethernet cable with no issues. My ISP is comcast and I have one of their modems that came with wifi im guessing it doubles as a router seeing i direct connect to it with my laptop. however my wifi works for my xbox one, a nexus 7 tablet a xbox 360 ,a printer and two smartphones with no issues what so ever. They are not all on at once so max connections shouldnt be a issue. I've spent hours on the phone with comcast and they insist its the laptop and not the wifi, how to go about fixing the issue. I've checked the drivers and their up to date then uninstalled and reinstalled still no luck. i use firefox for browsing and AVG for antivirus.
View 9 Replies
View Related
Feb 27, 2013
My laptop is few months old HP Pavilion g6 OS: Windows 8 uses a ralink rt5390r 802.11bgn wifi adapter.
The wifi was working just fine suddenly it stopped. It detects my home network but every time it tries to connect ends up "unable to connect to this network". It connects to my friends wifi but not mine. And it connects with cable.
There is a red cross on the wifi network but it's green not GREY. It is not a modem problem because the other PC connects just fine. When I'm on wifi, cmd ipconfig gives me disconnected media for all the network cards on the laptop. Command netsh shows failure and access denied.
What I have tried to do for the past week :
I upgraded the adapter/ driver. My windows is fully updated. I re-installed the network card. I tried a USB wifi. I uninstalled the private server. I uninstalled my Norton because I thought it was blocking the connection I also deactivated the windows fire wall. I changed the SSID and PSW ... nothing worked. and of course I tried restarting, resetting, rebooting, deactivating and activating, disabling and enabling every single thing but nothing works.
View 9 Replies
View Related
Sep 15, 2014
I have an HP Pavilion g7-2233cl Laptop running Windows 8. I bought it new (refurbished) about a year and a half ago.
Until recently, I’ve had no problem connecting to the Internet via WiFi. But recently, although everything says I’m connected to our home WiFi and things are working swimmingly, I cannot access anything on the Internet. I get messages like “Unable to connect” or “Cannot show this page.”
We have other computers on the same WiFi, and none of them are having a problem.
I’ve tried several remedies based on tips I’ve seen on the Internet (using a different computer, of course). For example, I:
Deleted all the temp files.
Flushed a bunch of stuff using the Admin. Command Prompt:
ipconfig /flushdns
nbtstat –R
nbtstat –RR
netsh int ip reset c:
esetlog.txt
[code]....
View 9 Replies
View Related
Apr 25, 2014
I have my ethernet cable connected right now, but I can't even load my wifi connections at all. I live in apartments so everyone around me has wifi and my phone and iPad is clearly connected, but it won't load any connections.
View 3 Replies
View Related
Oct 22, 2013
So after I upgraded to 8.1 I have been having internet connectivity issues, it says Im conected fine but cant load any web pages. So I ran trouble shoot and this is is what I got back. (See below). Sometimes troubleshoot will fix it other times not, this time it did.
Issues found :
The default gateway is not available
The default gateway is not available
The default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
[Code] ......
View 9 Replies
View Related
Jun 16, 2013
My ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so:
- WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar.
- Under the wired network properties IP Version 4, I manually set addresses to be
IP 192.168.10.1
Subnet 255.255.255.0
Gateway 0.0.0.0
Laptop B has only a wired network, set to
IP 192.168.10.2
Subnet 255.255.255.0
Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
View 2 Replies
View Related
Jun 24, 2013
I have 2 PC's, on the SAME IP range and the same network. The one is a Win 7 Pro machine and the other one a Windows 8 Pro machine
Both connect to a VPN network using the SAME Cisco VPN Client
Now BOTH connect fine to the VPN (status on Cisco VPN client says Connected).
Here is the problem:
The Windows 7 machine can access and ping to a local address on the VPN, nl 192.165.34.20.
The Windows 8 machine, however, cannot ping to that same address, although it is connected to the VPN.
I have done a CLEAN install on the windows 8 machine and have NO antivirus programs - Windows firewall is also disabled.
I have run the Client on the Windows 8 machine in various compatibility modes, but no luck..
View 2 Replies
View Related
Jun 11, 2013
I have two Win 8 Pro comps that will connect to one XP Pro computer but will not connect to another. They are online, on the web and can access data from our server but they are not able to access the non-server computers even though they show in the computers near me list. I never had an issue before and now no matter what I fix they will not connect to the other computers. The XP Pro I want to connect to has my counter dot matrix printer and if Win 8 is not connecting we cannot print. I CAN see and access the Win 8 computers FROM the XP PRo computer with the printer attached.
As a side note the two Win 8 comps see each other but will not connect to each other either.
View 3 Replies
View Related
Jun 21, 2014
How to see other computer(s) in a free wifi spot area?
The case: We have here 2 laptops (Windows 8) side by side in free wifi spot . I know that in such spots, for safety purposes I have to set my laptop not to share and mine is set accordingly.
But how can I see the other laptop next to mine on my own screen? It is my mom's brand new laptop. It is not set for safe hot spot browsing by default. So, I should be able to see it, but how?
So, question is how to set my laptop to show my mom's laptop sitting next to mine? I believe something must be set in control panels, perhaps?
View 9 Replies
View Related
Jul 13, 2014
I am facing a strange problem with my internet connection on Windows 8.
I have a netgear WNR612 wifi router and two laptops connected to it running Windows 7 on first and Windows 8 on second.
The connection in Windows 8 laptop shows sufficient signal strength but when I try to access internet, it does only shows connecting. I have changed browsers, wifi router, adsl router, released and reconnected IP address, forgot and re-added wifi network, reset wifi router to factory almost everything.
The strange part is that as soon as the other Windows 7 laptop is disconnected from the network, Windows 8 internet start working fine. I have tested this many times and there is no doubt in this behavior.
I dont know whether the problem is in any update installed on Windows 8 the older Dell Wireless 1703 wifi card or some virus in the other Windows 7 laptop.
My ipconfig output:
Ethernet adapter Bluetooth Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : F4-B7-E2-59-1E-42
[Code] .....
Note that I have assigned preferred IP addresses to both laptops based on MAC.
View 4 Replies
View Related
Nov 13, 2013
Problem on some or all of our 8.1 devices.
We have a user without local admin rights, whenever he changes location or between wifi/lan on the office he gets an UAC prompt, it doesn't say anymore then "Network" but i assume it is for network profiles.
Why and how to get rid of it? it is an domain account with a microsoft account attached to it, syncing skydrive and som stuff.
View 2 Replies
View Related
Feb 1, 2014
I did NOT create a restore point before doing the upgrade.
About a week ago, I updated my Windows 8 laptop (a year-old Lenovo Ideapad) to Windows 8.1. At first, it appeared that the upgrade went flawlessly. After a couple of hours though, the crack started showing. I found two issues:
1. I could connect to the internet after a reboot, but if I didn't ACTIVELY continue working on the internet, the connection would die. The only way that I could get it to 'resume' was to reboot. I was using a wireless connection. Tried a wired connection with the same issue. No other machine on the network were experiencing the issue.
2. I use Remote Desktop EXTENSIVELY to connect to client machines. All connections work EXCEPT for one which uses an RD Gateway within the connection. That connection will appear to start connecting after I enter the credentials, then simply close. No error. No message. The RDP connection simply closes. I tried building the connection again from scratch. Same issue.
3. Meanwhile, I noticed that my email (via Outlook 2010) never stopped...THAT part of the internet connection remains 'solid'. Very odd.
No matter what troubleshooting I did, I couldn't solve the problem. So, I decided to see if it was Windows 8.1 or my machine.
I went out an purchased (albeit probably temporarily) a brand new Toshiba Satellite (L55-A5284) with Windows 8.1 ALREADY INSTALLED. No upgrade required. I turned on the machine, and did NOTHING ELSE, but create a Remote Desktop connection to my client. I was able to connect instantly. YEAH! Must be MY upgrade on the Lenovo, not Windows 8.1.
Then, things get REALLY weird (or weirder). I signed off of the client site (I mean, after all, I'd proven that it was my old machine and NOT Windows 8.1, hadn't I?). Almost as soon as I'd signed off and shut the computer off, I realized that I needed something from the client machine. Since it will take me a while to restore my Lenovo, I figured that I'd get work taken care of first, and went to turn on and use the new laptop (Toshiba). Well, imagine my surprise when I could NOT CONNECT again via RDP on the new Toshiba with nothing additional installed on it except for the Remote Desktop connection.
I had let the system update Windows when I shut down and figured that it must be the update that was just installed, so I restored the machine back to factory (I mean why not...I had only created one Remote Desktop connection on the machine). After the restore THE CONNECTION WORKED AGAIN. Sign on, check. Sign off, check. Sign on again, NOPE. Restore computer (again), Sign on, check. Sign off, check. Sign on again, NOPE. So, while I am far from being a hardware specialist, it seems to me that something isn't 'releasing' when I sign off. EVEN A REBOOT (hard or restart) doesn't work. The only thing which solves the issue is a RESTORE - either the kind that saves your files or the one that resets to factory...either one 'resets' the connection, so that I can get on again ONE TIME.
I'm guessing that whatever's the issue with the new laptop (Toshiba) is also causing the internet instability AND the RDP problem on the old laptop (Lenovo).
View 9 Replies
View Related
Apr 17, 2013
I just got a new laptop (Acer Aspire One 756) and keep having an issue with the internet connection not being able to connect after the computer sleeps or hibernates for a few hours. It usually says identifying network... no internet access. I copied and pasted the trouble shooting that I did below. It still works if I restart or the computer sleeps or hibernates for less than an hour or so. The other computer and devices that use this connection work fine when mine isn't working. I can fix this problem by restarting the router and it works fine again.
It's just annoying to have to restart the router a few times a day. It also only does this with my network at home. I've tried uninstalling and reinstalling the network adapter with the most updated driver, power cycling the router and all the devices, changing the network adapter settings to do not turn this device off to save power, and resetting the Winsock like I've seen on other forum posts. None of these has worked so far. The router is a dlink WBR-1310 and it's pretty old. My wireless network adapter is a Qualcomm Atheros AR5B125.
Issues found:
"WiFi" doesn't have a valid IP configuration
"WiFi" doesn't have a valid IP configuration Not fixed Investigate router or broadband modem issues Failed Reset the "WiFi" adapter Completed
View 9 Replies
View Related
Sep 8, 2013
My Windows 8 laptop is having some WiFi connection issues.
Basically what happens is that every 5-20 minutes I cannot access the internet on browsers and the wifi connection is listed as "Limited".
The laptop: ASUS Vivobook S200E
The WiFi: Sky wireless router (no idea about model, it's almost two years old) But what I will say is that my Windows 7 laptop never skips a beat on this network, nor does my wife's Mac, nor do our 2 Android tablets, the iPad, the iPhone, the Android phone, and various devices that our friends connect when they come round. Literally no other device has any problems on this network, so I know (by the process of elimination) the Windows 8 laptop is the one with the problem.
In order to fix the issue I have to disconnect from the network, wait about 30 sec and reconnect again.
View 7 Replies
View Related
Apr 16, 2013
I'd like to submit an annoying issue that concerns my Windows 8 Samsung XE700T1A. I've just bought a new wifi access point, that is 8.11n compliant (300Mb). The problem is that the tablet connect only in 8.11g (54Mb).
The wifi board is Qualcomm option gtm67x, and the driver has been released on July 2002. I'm wondering if it's a windows 8 issue or a slate issue.
View 7 Replies
View Related
Aug 2, 2013
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies
View Related
Jun 27, 2014
This ONLY happens to the windows 8 and none of my other computers, this happens to a lot of people and on other forums they say "Change your MTU, set subinterface "Wireless Internet Connection" mtu=1492 store=persistent" but that DOESNT work, It says theres bad syntax even though i type it the exact same way I see it. what is "Wirelesss Internet Connection" ? do I put the name of my connection? How do I know if 1492 is the right number?
View 6 Replies
View Related
May 18, 2013
I just checked in my device manager and found and new device installed that I didn't install. It's a WAN miniport (Network Monitor) #2, which has the yellow triangle and exclamation point in it. Windows can't laod drivers required for this device. (code31)
I don't have any wireless hardware on my PC. This was installed on 5/15 and I believe it came with the last the 8 auto updates (18 of them I think) because the dates match. It wont update through device manager, it wont uninstall.
View 3 Replies
View Related
Feb 19, 2014
When I ran a video with subtitles in Windows 7 over RDP, the video worked perfectly but my subtitles didn't load. But when I played the same video in Windows 8 over RDP, they did.
Is there something...different about Windows 8's RDP that allows this to work?
View 3 Replies
View Related
May 11, 2014
Basically, whats happening is, it says connected to the internet, however, it won't load any site. We've attempted this on Internet Explorer, Firefox, and Google Chrome. The weird thing is, we have found that she can connect to sites by using the site's IP, but not with the actual address. Also, Skype is working perfectly fine with the connection. Its just, web addresses that cause a problem.
Running on Windows 8 and her computer model is a Satellite c55-A and the processor is intel(r) core(TM) i3-3120m cpu @ 2.50ghz 2.50 ghz. The manufacturer is Toshiba.
Also, this was a problem encountered on any router connected to. However, if we can not get this solved, will resort to attempting to restore to factory settings.
View 9 Replies
View Related
Dec 24, 2013
I've got a new desktop which is connected to my house wifi using an USB adaptor. The signal quality is constantly at 5 bars but I find myself frequently having to refresh multiple times whenever I load a new page on the browser either because it's not loading or pictures or not showing. Pages become near impossible to load when i am downloading stuff(torrents, upgrades, games etc). Also noticed other computers in the house are also affecting mine when they are in the process of downloading files. Torrents, updates all make it impossible for me to browse the net. Pages literally refuse to be loaded at all whenever something is downloading. I also have to infrequently refresh pages even when nothing is downloading because it's not loading or pictures are not showing. None of the other computers are affected however.
Any program that requires an internet access is also struggling to get connected. I had to use direct links to install certain programs such as Adobe reader/flash. It's often impossible to check for updates in programs or even sign on to clients like Steam/Origin which requires a connection. I had to try for ages before it signed in online but it's still having trouble loading images and such.
What is strange however is that I'm having no issues holding a connection when downloading bigger files such as direct downloads, windows update, steam game downloads and torrents. No drop outs that I've noticed. But it is faily slow averaging 400kb/s.
Everything else in my house including my laptop, another desktop, ipad and phone works fine. No issue browsing the net while downloading.
Wireless is connected through an USB adaptor pluged in to the back of my desktop. I've tried two adaptors (ASUS USB-N13 and Linksys AE1200) and both of them runs into the same problems. Running windows 8.1 and using ESET NOD32 as an antivirus with the windows firewall turned on. Desktop specs are as follows:
CPU: i5 4670K
Mobo: Gigabyte GA-Z87X-UD3H
RAM: G.Skill Ares F3-1866C9D-8GAB 8GB (2x4GB)
GPU: EVGA GeForce GTX 780
SSD: Samsung 840 EVO Series 250GB
HDD: Seagate 2TB
OS: Windows 8.1
This is extremely frustrating and has never happened with any other computers I've used before.
View 6 Replies
View Related
Aug 10, 2013
I just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies
View Related
Jun 9, 2014
I purchased a new Windows 8, Inspiron 15 7000 series - 7537 last December. I had been using a router at a hotel for the time, and it worked correctly. When I arrived home, I had a Belkin router, and i experienced network issues in that i could not connect to the wifi. I could connect with Ethernet cable. The problem was fixed through customer support eventually, but I now have a new Comcast router, and i'm experiencing what appears to be the same or a similar issue. I can access the internet fine by wire. With wifi, it says i have access to the internet over the internet icon in the bottom right, but i cannot access webpages. I can use skype, and communicate through it.
Here is the result from the ipconfig /all :
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
[Code] .....
I really need the wifi on this router working for this laptop. Let me note that it works on other laptops, so it should be an issue with hardware or settings on this laptop.
View 8 Replies
View Related
May 10, 2014
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
View 6 Replies
View Related
Dec 7, 2012
I prefer to keep my home WiFi network from public view by disabling the SSID broadcast, i.e "hiding" the network.
With two modem/routers (a Belkin Play Max F7D4401 ADSL modem/router and now a Cisco EPC2325 DOCSIS modem/router) on two computers (home-built desktop and Acer TM8172T notebook), after the initial connection Windows 8 Pro would not reconnect without tediously re-entering the SSID name and password. Once it does connect, it displays the original SSID name with a new one with an incrementally increasing appended number like:
I was manually deleting them all (except the original) using netsh, until I realized you can <right-click> on an entry in the screen above and choose "Forget this network."
This is the process I go through each time to re-connect. Is there something I'm missing?
I read that if Windows 8 saves too many WiFi connections, it cannot "remember" them to automatically reconnect to them, so on the notebook, I deleted all but wpcTrue (the original), and it now automatically reconnects, although occasionally it will add a new connection with an incrementally increased number -- currently the notebook shows both wpcTrue and wpcTrue 2. I had used the notebook on the road, so had about five WiFi connections saved. On the Desktop my home network is the only WiFi connection I've ever made. However, no matter what I do on the desktop, it NEVER remembers to automatically log on when the SSID is not broadcast.
I even tried manually setting up a connection via Network and Sharing Center > Set up a new connection or network, to no avail -- the desktop computer will not automatically reconnect.
I doubt that this is relevant, but the Belkin modem/router, the Belkin USB adapter I use on my desktop computer, and the notebook's Broadcom internal modem are all b/g/n. The Cisco modem/router is b/g.
If I "unhide" the SSID, i.e. broadcast the SSID, all is well in the world. Both computers automatically reconnect to the modem/router. If I hide the SSID, and then disconnect or reboot, the desktop computer will not automatically reconnect.
I just noticed that the pop up WiFi connection column shows "WiFi-2 Off" -- what does the "Off" mean?
And, why is it "-2" ? My notebook just shows "WiFi', period. (The first image with "WiFi (Off)" was from a previous Windows 8 installation on the desktop computer. I decided to change from EFI-boot to non-EFI so reinstalled Windows 8. I simply used the old image as a quick way to show how the connection name assignment runs away.)
View 3 Replies
View Related
Jun 27, 2014
How can i create local WIFI network without having internet access on my pc. This seems to work if I have access to internet but when i disconnect internet connection my PC ( virtual router ) cannot see anymore other devices..
All other devices that are connecting to my virtual hostednetwork are working without any problems expect my pc. What have i missed that my PC where virtual hostednetwork is running cannot see devices in "virtual" network without internet access?
View 3 Replies
View Related
Jul 18, 2013
I want to forget a Wi-Fi network from my network list i windows 8.1 . But when I right click on that network (to forget that network) nothing happens i.e. right click menu does not open.
View 6 Replies
View Related
Nov 1, 2013
I'm having a serious problem trying to connect my other laptops running windows 8, the host laptop that is connected to internet with modem is Compaq Presario g56 laptop also running windows 8, I'm connected to the internet with my evdo modem and this laptop is browsing fine, I download mhotspot to share this connection, this other computers are connected but showing limited connection in their network and sharing panel, the modem have access to internet and the private network I created on the host computer also show access to internet, so why are other computers connected to this computer are not browsing with this internet connection. attached is the screen shot of the host computer this problem had been persistent for more than one week
View 2 Replies
View Related
Jun 23, 2013
I just bought a msi s30 laptop yesterday. So everything went fine when I test the wifi connection before I go to sleep. When I say fine, I mean I could connect to the internet. Then when I woke up this morning, I turn on the wifi but it says "no network found". I check the router and it is working perfectly fine. I also checked the device driver and its also working properly.
View 5 Replies
View Related
Sep 15, 2014
Reinstalled lan driver and it is not showing in device manager. This is an acer aspire v3-371. Light doesn't come on when I toggle fn-f3 combo.
I think there is a service that is not running or it has been deleted. The driver files seem to have installled but it doesn't show under network adapters in device manager.
View 9 Replies
View Related
