Network / Sharing :: VPN - Connects On Win 7 But Not Win 8
Jun 24, 2013
I have 2 PC's, on the SAME IP range and the same network. The one is a Win 7 Pro machine and the other one a Windows 8 Pro machine
Both connect to a VPN network using the SAME Cisco VPN Client
Now BOTH connect fine to the VPN (status on Cisco VPN client says Connected).
Here is the problem:
The Windows 7 machine can access and ping to a local address on the VPN, nl 192.165.34.20.
The Windows 8 machine, however, cannot ping to that same address, although it is connected to the VPN.
I have done a CLEAN install on the windows 8 machine and have NO antivirus programs - Windows firewall is also disabled.
I have run the Client on the Windows 8 machine in various compatibility modes, but no luck..
View 2 Replies
ADVERTISEMENT
Feb 27, 2013
My laptop is few months old HP Pavilion g6 OS: Windows 8 uses a ralink rt5390r 802.11bgn wifi adapter.
The wifi was working just fine suddenly it stopped. It detects my home network but every time it tries to connect ends up "unable to connect to this network". It connects to my friends wifi but not mine. And it connects with cable.
There is a red cross on the wifi network but it's green not GREY. It is not a modem problem because the other PC connects just fine. When I'm on wifi, cmd ipconfig gives me disconnected media for all the network cards on the laptop. Command netsh shows failure and access denied.
What I have tried to do for the past week :
I upgraded the adapter/ driver. My windows is fully updated. I re-installed the network card. I tried a USB wifi. I uninstalled the private server. I uninstalled my Norton because I thought it was blocking the connection I also deactivated the windows fire wall. I changed the SSID and PSW ... nothing worked. and of course I tried restarting, resetting, rebooting, deactivating and activating, disabling and enabling every single thing but nothing works.
View 9 Replies
View Related
Jun 11, 2013
I have two Win 8 Pro comps that will connect to one XP Pro computer but will not connect to another. They are online, on the web and can access data from our server but they are not able to access the non-server computers even though they show in the computers near me list. I never had an issue before and now no matter what I fix they will not connect to the other computers. The XP Pro I want to connect to has my counter dot matrix printer and if Win 8 is not connecting we cannot print. I CAN see and access the Win 8 computers FROM the XP PRo computer with the printer attached.
As a side note the two Win 8 comps see each other but will not connect to each other either.
View 3 Replies
View Related
Jul 9, 2014
i have a lenovo idea pad that will connect to wifi but says limited connection. I can use the iternet via ethernet cable with no issues. My ISP is comcast and I have one of their modems that came with wifi im guessing it doubles as a router seeing i direct connect to it with my laptop. however my wifi works for my xbox one, a nexus 7 tablet a xbox 360 ,a printer and two smartphones with no issues what so ever. They are not all on at once so max connections shouldnt be a issue. I've spent hours on the phone with comcast and they insist its the laptop and not the wifi, how to go about fixing the issue. I've checked the drivers and their up to date then uninstalled and reinstalled still no luck. i use firefox for browsing and AVG for antivirus.
View 9 Replies
View Related
Nov 13, 2013
Problem on some or all of our 8.1 devices.
We have a user without local admin rights, whenever he changes location or between wifi/lan on the office he gets an UAC prompt, it doesn't say anymore then "Network" but i assume it is for network profiles.
Why and how to get rid of it? it is an domain account with a microsoft account attached to it, syncing skydrive and som stuff.
View 2 Replies
View Related
Feb 1, 2014
I did NOT create a restore point before doing the upgrade.
About a week ago, I updated my Windows 8 laptop (a year-old Lenovo Ideapad) to Windows 8.1. At first, it appeared that the upgrade went flawlessly. After a couple of hours though, the crack started showing. I found two issues:
1. I could connect to the internet after a reboot, but if I didn't ACTIVELY continue working on the internet, the connection would die. The only way that I could get it to 'resume' was to reboot. I was using a wireless connection. Tried a wired connection with the same issue. No other machine on the network were experiencing the issue.
2. I use Remote Desktop EXTENSIVELY to connect to client machines. All connections work EXCEPT for one which uses an RD Gateway within the connection. That connection will appear to start connecting after I enter the credentials, then simply close. No error. No message. The RDP connection simply closes. I tried building the connection again from scratch. Same issue.
3. Meanwhile, I noticed that my email (via Outlook 2010) never stopped...THAT part of the internet connection remains 'solid'. Very odd.
No matter what troubleshooting I did, I couldn't solve the problem. So, I decided to see if it was Windows 8.1 or my machine.
I went out an purchased (albeit probably temporarily) a brand new Toshiba Satellite (L55-A5284) with Windows 8.1 ALREADY INSTALLED. No upgrade required. I turned on the machine, and did NOTHING ELSE, but create a Remote Desktop connection to my client. I was able to connect instantly. YEAH! Must be MY upgrade on the Lenovo, not Windows 8.1.
Then, things get REALLY weird (or weirder). I signed off of the client site (I mean, after all, I'd proven that it was my old machine and NOT Windows 8.1, hadn't I?). Almost as soon as I'd signed off and shut the computer off, I realized that I needed something from the client machine. Since it will take me a while to restore my Lenovo, I figured that I'd get work taken care of first, and went to turn on and use the new laptop (Toshiba). Well, imagine my surprise when I could NOT CONNECT again via RDP on the new Toshiba with nothing additional installed on it except for the Remote Desktop connection.
I had let the system update Windows when I shut down and figured that it must be the update that was just installed, so I restored the machine back to factory (I mean why not...I had only created one Remote Desktop connection on the machine). After the restore THE CONNECTION WORKED AGAIN. Sign on, check. Sign off, check. Sign on again, NOPE. Restore computer (again), Sign on, check. Sign off, check. Sign on again, NOPE. So, while I am far from being a hardware specialist, it seems to me that something isn't 'releasing' when I sign off. EVEN A REBOOT (hard or restart) doesn't work. The only thing which solves the issue is a RESTORE - either the kind that saves your files or the one that resets to factory...either one 'resets' the connection, so that I can get on again ONE TIME.
I'm guessing that whatever's the issue with the new laptop (Toshiba) is also causing the internet instability AND the RDP problem on the old laptop (Lenovo).
View 9 Replies
View Related
Sep 15, 2014
I have an HP Pavilion g7-2233cl Laptop running Windows 8. I bought it new (refurbished) about a year and a half ago.
Until recently, I’ve had no problem connecting to the Internet via WiFi. But recently, although everything says I’m connected to our home WiFi and things are working swimmingly, I cannot access anything on the Internet. I get messages like “Unable to connect” or “Cannot show this page.”
We have other computers on the same WiFi, and none of them are having a problem.
I’ve tried several remedies based on tips I’ve seen on the Internet (using a different computer, of course). For example, I:
Deleted all the temp files.
Flushed a bunch of stuff using the Admin. Command Prompt:
ipconfig /flushdns
nbtstat –R
nbtstat –RR
netsh int ip reset c:
esetlog.txt
[code]....
View 9 Replies
View Related
Feb 23, 2014
I have a tiny wireless piece from realtek that my dad had bought. This piece was working fine up until recently. I had built my own tower and put the piece in there from our old one.. All has been working up until now. Now when I turn on my new tower the wifi connects but does not work. No browsers load and none of my services are working. It also messes up the wifi connection for the other devices around. My sibling will be using their laptop playing something like WoW and when I power up my tower the lag hits. From time to time it will drop my laptop's internet connection entirely. However, this is not the case recently. The router we use is a linksys e2000.
Every now and then the pages load but they are slow and blocky. My dad says it is usually caused by a loss of packets but I did the packet test in cmd and only had a 1% loss.
View 3 Replies
View Related
Apr 16, 2013
I'd like to submit an annoying issue that concerns my Windows 8 Samsung XE700T1A. I've just bought a new wifi access point, that is 8.11n compliant (300Mb). The problem is that the tablet connect only in 8.11g (54Mb).
The wifi board is Qualcomm option gtm67x, and the driver has been released on July 2002. I'm wondering if it's a windows 8 issue or a slate issue.
View 7 Replies
View Related
Aug 12, 2013
I am trying to share a specific folder on my Windows 8 computer with my Windows 7 computer. They are both on the same network connected to the same router. The Windows 8 computer is connected through ethernet, while the Windows 7 computer is connected wirelessly.
Here are my settings on my Windows 8 Computer:
This is the error I get on my Windows 7 computer:
What's up with this? On a related note, is it possible to share this folder with a specific PC, rather than "Everyone" on the network?
View 5 Replies
View Related
Apr 23, 2013
I am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
View 9 Replies
View Related
Aug 20, 2014
I've been trying to set up an old Savin 9033 printer through the company's router, but I couldn't find the network it's set up on from any other computer.
So I pull up Network & Sharing, see that Network Discovery is turned off.
I check it, go to click on "Save Changes" and nothing happens. I click it a few times and it kicks me back to the previous page, nothing saved. No password prompt or anything.
I double checked that all the appropriate services are running (DNS Client, SSDP Discovery, UPnP Device Host, Function Discoveryr Resource Publication, etc.) and made sure Network Discovery was allowed through Windows Firewall.
View 2 Replies
View Related
Aug 2, 2013
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies
View Related
Feb 27, 2013
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
View 5 Replies
View Related
Jul 24, 2014
When you first connect to a new network Windows 8.1 opens up the following window:
I am trying to automate a way so that the answer is always: yes, turn on sharing and connect to devices.
It needs to be automatic without requiring the user to click on the window. This will be used in systems where no keyboard/screen/mouse are present.
View 8 Replies
View Related
May 25, 2014
Windows 8.1 Pro with Media Center,
Windows 8.1
Comcast Gateway.
Pro Media can access 8.1 Network and Homegroup.
8.1 cannot access ant Pro Media. Network Error "Windows cannot access DesktopUsersPeteDocuments' (or any other folder)
Can access IP4 address.
Windows 8.1 new machine, came with 8, updated to 8.1 then 8.1 Update.
View 5 Replies
View Related
Jul 24, 2014
I am trying to get file sharing to work with my win 8 machine and my OS X Server. The computers are on the same network with the same workgroup but I can't seem to connect. I was able to connect with the wife's win 7 home machine until I upgraded it to win 7 Ultimate now it wont connect either.
View 1 Replies
View Related
Feb 6, 2013
I am in the midst of the final steps in setting my my new Win 8 system.
I have a Win XP and Win 8 computer on my home network. I believe that I have set up file and printer sharing correctly. I can access the files and printer on the XP system from the Win 8 system. However, when I attempt to access the Win 8 files from the Win XP system, I get a long delay (about a minute or two) and then it asks me for the User Name & Password. I enter them and then and it works fine.
If I try to print on the printer attached to the Win 8 system from the XP system, I get a printer error unless I have already signed in with the ID & PW when accessing files. It never asks me for an ID & PW before attempting to print.
On the Win 8 system, I have selected "Turn off password protected sharing" in the "Network and Sharing Center/Advanced Sharing Settings".
The Win XP system has previously been correctly sharing files and printers with another XP system for some time and I haven't changed any settings on the XP computer.
Both the XP and Win 8 systems are assigned the same Workgroup name.
View 9 Replies
View Related
Aug 9, 2014
I want to backup my photos from my computer's D: drive to OneDrive. But when I start to upload them, it says those photos are also available offline. That means, all photos uploaded from my D: drive are also copied to my C: drive. But it wastes my space on the C: drive. All my settings are set to upload photos with online access only. I tried to delete the copied photos from my C: drive but it also deleted them from OneDrive. Is it possible to upload only to OneDrive without copying the photos to C: drive?
View 1 Replies
View Related
Jan 3, 2014
Okay, so in Windows 7 I am able to connect my wireless to my phone, and run an ethernet cable over to my Xbox. If I use the ICS feature and configure it under services to allow ports 88 and 53 UDP, it works fine. This also allows my Xbox to seemingly add to this list of ports as it finds necessary.
The issue is however, with Windows 8, although I can connect to Xbox Live the same way, it does not seemingly allow the Xbox to add more ports that it deems necessary. This leads to that NAT error message that I am actually trying to do this as a way to bypass it.
In Windows 7 this only works if the connection is set to Home (not sure about Work), but not public. I'm curious if the reason this does not work in Windows 8 is that Windows 8 does not have a Home option, but rather only Private or Public settings. There is some small setting buried deep somewhere that I just need to change to treat it like Windows 7 allows Xbox to treat home networks and configure/add ports automatically.
View 3 Replies
View Related
Jun 8, 2013
I would like to make a folder share from a tablet with windows 8 with password protected to a laptop of windows 7 and another of vista. I have followed the tutorial of File Sharing - "Share with" & "Stop Sharing" in Windows 8. My PCs have been set in the same workgroup and same user account, network discovery and file and printer sharing turned on. At the first time, it is OK for windows 7. However after some changes of account (delete and create them on both windows 8 and windows 7), it doesn't work anymore with the error from windows 7 "Login failure: user has not been granted the requested logon type at this computer" whenever password protected turned on in windows 8 and only OK when password turned off.
View 1 Replies
View Related
Jun 16, 2013
My ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so:
- WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar.
- Under the wired network properties IP Version 4, I manually set addresses to be
IP 192.168.10.1
Subnet 255.255.255.0
Gateway 0.0.0.0
Laptop B has only a wired network, set to
IP 192.168.10.2
Subnet 255.255.255.0
Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
View 2 Replies
View Related
Sep 15, 2014
I've got a new Win 8.1 computer (Surface Pro 3), and on that computer, as an adiministrator, I turn off Password Protected Sharing for my network (Control Panel -> Network and Sharing Center -> Advanced sharing settings -> All networks). Once this is done, the other computers on the LAN have good access to the disks I have shared. However, when my new computer sleeps and wakes up, or even sometimes if I merely close the cover and open it, something has reset the password protected sharing option and turned it back on. The other computers no longer can access the shared data. I have to open up the control panel (as above) and turn password protected sharing off. Again. Many times a day.
How do I get this option to stick the way I set it?
View 3 Replies
View Related
Aug 10, 2013
I just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies
View Related
Dec 24, 2013
windows 8.0
I was happily using file history, it was backing up to my G partition, which is located on my second hard drive (both drives are internal)but now I get error message:
I think the problem is that this partition got added to my user, that's what the network path shows:
How do I get it out of my user, and back on a normal path?
View 1 Replies
View Related
Jul 17, 2014
I have a 20mbps upload with my ISP and I'm getting around 18.5 consistently. I've started using Zoolz for backing up and I have been assured it does not throttle the bandwidth. It reports it is uploading at around 15-16mbps which would be absolutely fine but Task Manager and NetSpeedMonitor show the upload speed as considerably lower.
I've attached a screenshot showing the difference but I was wondering if Task manager and NetSpeedMonitor could be wrong at all? It seemed quite coincidental that the speed reported by Zoolz was roughly what I would expect. Is there any sort of traffic that wouldn't show with Task Manager?
View 1 Replies
View Related
Dec 15, 2013
I re-installed Windows 8 yesterday evening (thought it would be quicker than to cleanup and fix my old install) and then directly upgraded it to Windows 8.1. The problem I am experiencing is quite weird: The Operating System doesn't detect the network cable.
With that being said, do not jump straight to the "Did you turn it on and off again" questions. Here is what I have done so far:
Hardware-Side: Cross-check the cable with another computer --> Working fineCross-check the wall plug with another computer --> Working fineTest the connection with the BIOS's connection diagnostic utility --> Link detected
Software-Side: Checking if Windows was up to date --> Nothing to updateUpdating the motherboard's BIOS --> Not betterUpdating the LAN's drivers with the ones I found on the manufacturer's website --> Not better
I am wondering what is wrong with my installation. It was working A1 a few days ago, except for the issues I re-installed the operating system for.
View 4 Replies
View Related
Aug 19, 2014
In my network 4 Desktop running windows XP all are connected LAN cable and my modem is tplink and 1 laptop running windows 8.1 pro accessing network through wireless in my laptop network place all the pcs are visible but I am not able to ping them and when I click I am getting message that Network path not found Error code 0x80070035
View 2 Replies
View Related
Dec 30, 2013
I have a lenovo G505 laptop - it will no longer connect to my BT home hub despite it showing as being available. I suspect it might be to do with the fact that it is has a passkey - I entered it yesterday when prompted and it connected fine, but now I'm not being given the option of entering the key.
I've also tried connected using the BT wifi (as opposed to homehub) but once again it will not connect me. I've been through all the troubleshooting options, and searched under every term I can think of, but nothing is working.
View 2 Replies
View Related
May 6, 2014
My 8.1 laptop shows multiple network connections to my Samsung Smart TV --- One as "media connections" and 3 as "other connections". Both devices are on a simple wireless network using Linksys WRT54GS.
Under the "Network" page, most of the "Properties" of the TV connections are the same except for "Serial Number" and "Unique Identifier". Did I do something wrong when setting things up? Are these extra connections harmful? Should I delete some? How?
View 1 Replies
View Related
Mar 23, 2013
Windows 8 64. To date all my networking needs are just fine
Though I do have just one last loose end to tie up with the adhoc wifi it just fails after sleep.
View 1 Replies
View Related
