So I just got a custom built computer with Windows 8.1 installed on it, When I go to settings > Networks, It says No Connections are Available, every other device in the house has connection to our WiFi.
View 4 Replies
My 8.1 laptop shows multiple network connections to my Samsung Smart TV --- One as "media connections" and 3 as "other connections". Both devices are on a simple wireless network using Linksys WRT54GS.
Under the "Network" page, most of the "Properties" of the TV connections are the same except for "Serial Number" and "Unique Identifier". Did I do something wrong when setting things up? Are these extra connections harmful? Should I delete some? How?
I'm trying to set up VPN to connect immediately upon startup.
I decided to try setting up my VPN in Windows itself, instead of using Open VPN as before.
This is the Windows VPN functionality that's available from the Metro themed interface and . But it's so dumbed-down that I can't even see what type of VPN connection this actually is.
If this connection if PPTP or L2TP? Or something else?
Whichever it is, is that connection considered to have integrity or is it more or less cracked?
My computer has 2 wireless cards and a gigabit ethernet port. I have my own internet and my neighbors each allow me to connect to their internet. If I were to set the Wi-Fi to connect to theirs, and the ethernet to connect to my internet would I be able to take advantage of the extra bandwidth?
View 1 Replies View RelatedI user FTP & Telnet a lot to connect to devices on our LAN.
With Windows 8 I've been using ZoneAlarm as my firewall as I found Windows Firewall caused a 5 -10 second delay in every FTP / Telnet Connection.
Last night I upgraded to Windows 8.1 and ZoneAlarm no longer works, so I'm back with the Windows Firewall and the delay in connections.
I've ensured the APPS I use have access via the firewall and they do connect and work fine... but after establishing the connection there is a 5 - 10 second delay in the connection. With ZA this was all instant..
I am having a problem with bridging my connection I have been online look around and I could not seem to find anything that has worked ok basically I have 2 connections I want to bridge together but after is done bridging no bridge appears under network adapter settings ?
View 4 Replies View RelatedOn my Toshiba laptop (I've only had it since the 8th of August) under Networks it says, "No connections are available". I was playing Diablo3 and then it suddenly said not connected to battletnet. That is besides the point, but I think I might have hit something that turned the wifi off. After failing to fix it with a system restore it blue screened saying something about an error and collecting a data and that it was going to restart itself. Then it said to get more information or something like that the error code was MEMORY_MANAGEMENT. After restarting I thought it was still messed up (it showed no networks available in the lock screen) then I logged on and it still did. Then it showed I was connected to WiFi again, then after leaving for a few brief minutes it was back to no connections available. It did the blue screen thing again and restarted.
View 3 Replies View RelatedI'm trying to create a shortcut to "Control PanelNetwork and InternetNetwork Connections". I am not able to. Is there something about going to this folder that is forbidden?" If I have inserted the incorrect path please give me the correct answer.
I am preparing a lesson and a short cut to the adapters will make it easier.
I have my ethernet cable connected right now, but I can't even load my wifi connections at all. I live in apartments so everyone around me has wifi and my phone and iPad is clearly connected, but it won't load any connections.
View 3 Replies View RelatedWhen I turn on my Toshiba Satellite laptop, it does not see my i-phone hotspot. Wi-Fi status says "No Wi-Fi connections available". I always have to turn the hotspot off and then back on after the laptop is up and running for the laptop to find it. This does not happen with my desktop. It sees the i-phone hotspot without the need to cycle the hotspot off and back on, so I'm thinking that it has to do with the Toshiba rather than the i-phone. Both laptop and desktop are running Windows 8. Not a big problem, but I thought some one may know of a setting which I need to change.
View 3 Replies View RelatedSo I've set up my desktop PC to function as a portable WiFi hotspot for my other mobile devices. First I used the Cmd Prompt to create a sharing network, but since I had to open that every time I started up the computer, I switched to using a program called MyPublicWiFi (1 click setup).
However, in the last few days, my WiFi connection was getting kind of buggy. (No internet connection with my phone while I was connected to the WiFi network, etc)
Just now, I looked at the Network Connections, and there are 3 LAN connections that weren't there before. (picture: [URL] ....) Are they part of the problem, and how do I remove those networks?
I have a new Dell laptop with Windows 8.1 - I work from home & connect to the internet via my home wifi network. The problem I have been experiencing is that my laptop connects to the internet at boot up but then disconnects for several minutes & then re-connects again. This coincides with the Network & Sharing Centre showing a number of Local Area Connections (numbered 3,4,5,6 etc) being created under Unidentified Public Networks. I have tried disabling the LAC's but they re-enable whenever I re-boot & I have the same issues again. My networking knowledge is very limited so how to rectify this issue.
View 9 Replies View RelatedLive Tiles missing. I recently refreshed my comp. as i had issues with my live tiles as you can see in the link above. And now none of my tiles connect to the internet. I checked my connections, which is fine.
I keep getting a constant error msg saying that the tiles cannot be displayed as there are no internet connections available.
This problem occurs unexpectedly. I usually use my laptop to connect to WIFI in our school then suddenly i cannot detect any wifi connection even bluetooth disappear.
View 9 Replies View RelatedMy fully updated Windows 8.1 notebook suddenly will not show any wifi connections when I click on the icon in the system tray (it shows "No Connections are Available", although it is connected, and I can surf and browse normally).
To connect to a new network, I have to manually enter the details of the network, and then it connects. This is something new, since previously it would show all the available networks, and allow me to make a selection (which is normal). What setting could have flipped do enable the above situation?
The computer turn off the wireless connections and defaults into airplane mode. I had this problem with Windows 8. The option to easily toggle airplane mode on and off become grayed out unchangeable. The only way I found to temporarily fix the problem was to rightclick the airplane icon and then troubleshoot the wireless connections which would then turn wireless back on. I had the option to upgrade to 8.1 and I did and it fixed the problem for a while. It did happen again which is why I'm back on the web searching for possible more permanent solution for this. Luckily it only happened once a week ago and hasn't happened again. I was wondering if this bug was known about and if you possibly know of a way to fix.
View 3 Replies View RelatedI was trying to configure the WiFi on this laptop when I 'discover' this. You cant configure the network by doing a right click over the net I want to configure. This means that I cant change the password of this WiFi connection and so on.
Im not sure whats wrong. It was installed from this MICROSOFT.WINDOWS.8.1.PROFESSIONAL.RTM.X64.VOLUME. WITH.ROLLUP-1.ENGLISH.DVD-WZT and nothing more.
I installed Windows 8.1 build 9471 into my desktop. I use a TP Link TL-WN781ND wireless adapter to access my home network and the internet. I tried copying the drivers from Windows/System32/Drivres and installing them manually, I also downloaded the exe from the site but they still wouldnt connect. It would just say no connections found.
View 7 Replies View RelatedIs there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies View RelatedProblem with Windows 8.1 on December 31st, and then I found a video on youtube with the same problem.
I couldn't see any wireless connections and my sound didn't work no matter what. So I ended up having to factory reset my computer. Sucks. It happened again later, but I system restored that crud and it was restored. It ever happens again without any system restore points that I can use.
[URL]
I am trying to share a specific folder on my Windows 8 computer with my Windows 7 computer. They are both on the same network connected to the same router. The Windows 8 computer is connected through ethernet, while the Windows 7 computer is connected wirelessly.
Here are my settings on my Windows 8 Computer:
This is the error I get on my Windows 7 computer:
What's up with this? On a related note, is it possible to share this folder with a specific PC, rather than "Everyone" on the network?
I am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
I've been trying to set up an old Savin 9033 printer through the company's router, but I couldn't find the network it's set up on from any other computer.
So I pull up Network & Sharing, see that Network Discovery is turned off.
I check it, go to click on "Save Changes" and nothing happens. I click it a few times and it kicks me back to the previous page, nothing saved. No password prompt or anything.
I double checked that all the appropriate services are running (DNS Client, SSDP Discovery, UPnP Device Host, Function Discoveryr Resource Publication, etc.) and made sure Network Discovery was allowed through Windows Firewall.
I have my default Windows firewall option set to block all outgoing connections. What are the applications that I need to allow in order for the tiles on the start menu like weather, news, etc to work?
View 3 Replies View RelatedThis morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
I am trying to get file sharing to work with my win 8 machine and my OS X Server. The computers are on the same network with the same workgroup but I can't seem to connect. I was able to connect with the wife's win 7 home machine until I upgraded it to win 7 Ultimate now it wont connect either.
View 1 Replies View RelatedOkay, so in Windows 7 I am able to connect my wireless to my phone, and run an ethernet cable over to my Xbox. If I use the ICS feature and configure it under services to allow ports 88 and 53 UDP, it works fine. This also allows my Xbox to seemingly add to this list of ports as it finds necessary.
The issue is however, with Windows 8, although I can connect to Xbox Live the same way, it does not seemingly allow the Xbox to add more ports that it deems necessary. This leads to that NAT error message that I am actually trying to do this as a way to bypass it.
In Windows 7 this only works if the connection is set to Home (not sure about Work), but not public. I'm curious if the reason this does not work in Windows 8 is that Windows 8 does not have a Home option, but rather only Private or Public settings. There is some small setting buried deep somewhere that I just need to change to treat it like Windows 7 allows Xbox to treat home networks and configure/add ports automatically.
I would like to make a folder share from a tablet with windows 8 with password protected to a laptop of windows 7 and another of vista. I have followed the tutorial of File Sharing - "Share with" & "Stop Sharing" in Windows 8. My PCs have been set in the same workgroup and same user account, network discovery and file and printer sharing turned on. At the first time, it is OK for windows 7. However after some changes of account (delete and create them on both windows 8 and windows 7), it doesn't work anymore with the error from windows 7 "Login failure: user has not been granted the requested logon type at this computer" whenever password protected turned on in windows 8 and only OK when password turned off.
View 1 Replies View RelatedI just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies View RelatedI re-installed Windows 8 yesterday evening (thought it would be quicker than to cleanup and fix my old install) and then directly upgraded it to Windows 8.1. The problem I am experiencing is quite weird: The Operating System doesn't detect the network cable.
With that being said, do not jump straight to the "Did you turn it on and off again" questions. Here is what I have done so far:
Hardware-Side: Cross-check the cable with another computer --> Working fineCross-check the wall plug with another computer --> Working fineTest the connection with the BIOS's connection diagnostic utility --> Link detected
Software-Side: Checking if Windows was up to date --> Nothing to updateUpdating the motherboard's BIOS --> Not betterUpdating the LAN's drivers with the ones I found on the manufacturer's website --> Not better
I am wondering what is wrong with my installation. It was working A1 a few days ago, except for the issues I re-installed the operating system for.
In my network 4 Desktop running windows XP all are connected LAN cable and my modem is tplink and 1 laptop running windows 8.1 pro accessing network through wireless in my laptop network place all the pcs are visible but I am not able to ping them and when I click I am getting message that Network path not found Error code 0x80070035
View 2 Replies View Related
