just recently i did somthing to my computer i have no clue wat the computer than started to come up with this intel this n says error 111 down the bottom...press F4 thing.i press F4 n it goes to bios setup utility..than i usually just press escape n enter[ok] and at the moment it goes to the black screen where u choose wat to use..eg start windows normally, safe mode, safe mode with networking. i use the last known working configuration n the loading windows black screen comes up n my computer than restarts...can someone please tell me how to fix this. i feel like throwing my computer out the window! its 1 1/2 yr old
2.2 GHz Athlon 64 512 MB DDR2 Windows XP Media Center Last night, the right-click function on my optical mouse starting acting up, wouldn't work unless I pressed hard. As I was furiously right-clicking on the desktop to get it to work, all of the text backgrounds on the desktop icons turned from invisible to black. Oops, no problem, I thought, I'll restart and it'll return to normal. Nope. So I right-clicked (replaced the mouse with a PS2 model, works fine now) on the desktop, went to the Desktop tab, Customize, Web, and unchecked "Lock desktop items". The icons looked fine after that. More weirdness followed: when I went into hibernation, no problems (it stated "preparing to hibernate", etc.). But touch the mouse, and it returns to life as if in standby mode. All the power settings are normal for using hibernation. Please don't tell me to not use hibernation, I've always used it with no problems. No new or weird processes running in the background. What on earth could my idiotic right-clicking have done to my settings to result in these two problems? Oh yeah, I did update Windows a few hours before this, but the hibernate feature definitely worked prior to my problem. I'd hate to have to restore to the previous restore point since I'm on dialup and I hate updating Windows manually.
I have never had a sound problem on my computer until very recently. I can restore it back and the sound is restored. However, every morning, the sound is "gone". I then restore it back to Sept. 14, and the sound returns. I use the "automatic update" feature. Last night after I restored back to 9/14, I changed the option to "notify me of updates". So far, this morning, I still have sound. Is it possible that one of the automatic updates is causing this problem. Or do you have any suggestions as to what may be causing it. By sound, I am just taking about the sound you hear when you reboot or play online games not the cd room
Hey, I just reinstalled Windows XP Pro SP2 (I've done like a hundred times before). After Installing my WiFi I install Norton 360, theni fully update my PC with Microsoft Update. This meant Downloading Service Pack 3. I've had Service Pack 3 on the same PC before. Whenever I try to install updates now they all totally fail with no error codes, and Winodws Live Installer fails all its installations. I manage to be able to install .exe applcations fine. but its bugging me not to be able to instal MSN
I am running Windows XP (SP2) on an eMachines T2080 desktop. All Windows security patches and other OS updates are current. McAfee virus scan is run weekly, as is SpyBot S&D and AVG/Ewido. I am running a GeForce FX 5200 graphics card with up-to-date drivers
The problem is, while using this computer, i had a hung-up process that was slowing things down. After doing CNTL-ALT-DEL to see the process list, i accidentally shut down the explorer process, thinking it was a hung-up internet explorer. Naturally, the computer shut down, but ever since, it does not seem to want to boot appropriately. From a cold power-up, it will go through the "Windows" logo screen with the blue scrolling bar for about 10 seconds, then the screen goes black and stays black for about a minute. Rather than coming to the light blue screen where the user-id's live, the system instantaneously flashes a "blue screen" (with some white characters on the screen), however, it's so fast that I can't read it, nor can I get a screen shot of it. Once that blue screen flashes, it goes back and tries to boot again, only it gives me the options of safe mode, start windows normally, start from last known good configuration, etc. I can boot up just fine in safe mode, but the blue screen phenomenon happens for all the other options. I have tried a system restore to a previous day, and that doesn't work either.
any ideas on how to proceed, short of an OS reinstall / repair. I have seen some suggestions for CMOS battery replacement,I can copy any utility files I need just fine while in safe mode, but I'd like to try and do additional troubleshooting
My computer has automatically tried to install it over 30 times now, and i tried manually about 5 times, and everytime it just fails, and doesn't complete! PLEASE HELP!
I copied/cloned my failing C: to a drive on USB. C: drive has now failed and I need the copy to become bootable. Why can't this question be a simple answer. What happened to fdisk utilities?
For the past several days, MS has been downloading and trying/failing to install their MS NETframework 3.0 service pack1 (KB959300) update.can anyone tell me what to do so it can go ahead and install?
I installed Windows XP Pro over my Windows XP home a few days ago. My Windows XP Pro seemed to be working fine except it didn't feel or acknowledge my built in speakers and various other hardware. My dad said this might stem from the fact that the Windows I have (being from 2001) is older than my laptop. He suggested I DL the service pack onto on desktop computer, put it on a disk and open it on my laptop and install. I did that, and everything seemed to go fine until I restarted my PC as I usually do when I install new software. My laptop told there had a been a error that Windows was failing to boot properly due to some failed installation of software or failed hardware installation. It had a few options like "start with the last known configuration of windows that worked on your computer" so I did that. And I tried the other options too. But after a few screens of the usual booting up stuff my laptop just goes to a black screen and I can't get away from it. Windows Support won't help me so I'm asking you guys.
I installed XP x64 (Yes, I know, that was a mistake) on my machine a while ago and was tired of having to put up with all the incompatibility issues that had been arising, whether it was not having iTunes work properly to even some of my favorite software just not loading and prompting me with error messages.
Running XP Pro and SP2. For some reason my icons in my bottom Right hand tray keep losing themselves. The only ones shown are my Wireless Adaptor, Bluetooth and Kaspersky. But when I go to Control Panel, Sounds and Audio devices Properties and turn the icon on and 'apply' etc. all of my missing icons pop up, "sound, wireless connection, cable network connection and safely remove hardware". But when the system is restarted for use at another time, Its back to as described with missing icons. I've been into Control Panel, System Services and down to Universal Plug and Play properties, this was set to "Manual" to which I changed to "Automatic". I did this following a subject at MSN Knowledge. But again starting the system today its just the same. One thing not mentioned, I did a registry clean a few weeks ago, whether someting had changed at that point.
hope someone can help me! I have windows XP and a while ago IE stopped being able to download, i have resolved that by reinstalling IE, however about the same time my windows update installations were failing and i thought it was because of my download problem in IE however now IE is fixed but i still cannot install windows updates.Before anyone tells me to go into tools, options, security blah blah, i have done that already but it has not resolved the problem. The error message i get is just a box that says updates were unable to be successfully installed then a list of the updates it was unable to install, but no reason for the error or number is given.
I have malwarebytes antimalware, ad- adware and spybot search and destroy installed in Windows xp service pack 2, 32 bit.All 3 has problems updating with the following error messages: malwarebytes update failed. Make sure you are connected to the internet and your firewall is set to allow malwarebytes anti malware to access teh internet.ad-adware connection error,check your settings.spybot search and destroy not seeing new updates.Also when I search the problems online the,I am denied access to the support pages for those problems.The web page is not being displayed just as if I don't have internet access
At random times, my Firefox will freeze, and I have no other choice to get it away but to restart my entire computer, and that is VERY annoying.And at other times, explorer.exe (obviously the start menu, task bar, etc) just fails by saying:"Explorer.exe has encountered a problem and has to close. Sorry for the inconvenience."
lately my computer has been having these symtoms:- Hanging while left on and not used- Crashing Randomly, maybe 5 Minites into startup- Failing to start with a black screen where i should reach the login screen but i dont- Failing to start with the message "A Disk Read Error Has OccuredThe only way i have found around these problems, was taking the case off and disconnecting wires to the hard drive or the mother board and then putting them back in, even then i may have to restart it once or twice.
Compaq Presario 6470NX running Windows XP. Automatic updates are continually trying and failing to update my system. One of the popups I get is: "SQLDUMPER library failed initialization. Your installation is either corrupt or has been tampered with. Please uninstall then re-run setup to correct this problem." I restored to an earlier date and that went away. But, I'm still not getting my updates done. Last Tuesdays are (KB928365, 928366, and 928367).
I've got an HP / Compaq notebook where the smart diags indicated a failing hard drive, HP shipped me a replacement drive under warranty and I removed the drive and used a couple of notebook hard drive adapters to hook them up as master and slave on the secondary channel of one of my desktops. I then used Ghost to clone the failing drive to the replacement since I really didn't want to have to reinstall all my applications again. The clone completed without any seeming problems however I haven't been able to get the new drive to boot up, the problem is that I just get a blank screen with a flashing cursor and no boot menu, end of story...
I happen to have a Win XP Pro full version CD and I am able to boot from the CD to the recovery console, I've tried the following: Chkdsk /R - Did find and fix some problem the first time around, but didn't find anything wrong on subsequent runs. Fixboot - ran with no problems but still no go. FixMbr - indicated "This computer appears to have a non-standard or invalid master boot record", no matter how many times I've run this and it says it's rewritten the MBR successfully it still says the same thing. In-place upgrade - I've run an in-place upgrade twice and both times it completes and says the system will reboot and the installation will continue but it still gets stuck on the reboot. Following the two in-place upgrades I've rerun all of the previous steps and I still can't get it to boot, nor do I get any type of error message that indicates what the problem is.
When I startup Windows XP I get the following message:
"Windows cannot create a temporary profile directory. This may be caused by insufficient security rights. If this problem persists, contact your network administrator"
DETAIL: Insufficient system resources exist to complete the requested sequence
My computer is Toshiba Satellite A215, with Windows XP home edition. I had Service Pack 2, but about a week ago, I updated to Service Pack 3. After installing Service Pack 3, the whole computer slowed down and started acting weird. The speaker started to make noise, it started to show error messages often, the internet does not work smoothly, spyware & virus search take 10 hour or more and never finish (it used to take only a few hours), etc.
So, I wanted to put the Service Pack 2 back to my computer. I tried uninstalling SP 3. But it failed uninstalling and I got a message says something like "couldn't uninstall SP3". I thought it might let me uninstall if I restart the computer and I tried to restart, and it never start again. This blue screen with a message, something like "autochk program not found-autochk skipped" comes up and then it goes back to the Windows LOGO screen and keeps doing the same thing. I read about some similar problems, and tried a few things, like starting with safe mode or last setting that worked, etc, but they do not seem to work....
I have a hardrive( Maxtor 6Y200P0) wich have got corrupted and bad segments. (this seme to be a common problem with Maxtor drives) Im almmost sure this drive have psychical damaged clusters, cause i have tested alot & alots of tools that should fix this has failing in repairing this damaged clusters and segments. this includes Maxtor official PoweMax v 1.21, wich fails to complete the surface test. i have got an Error Diagnostic Code=de676679. a code with a 8 numeral should indicate that a Maxtor Drive drive is broken,and is in need of replacement. thats all i know where should i send this code for a real analyz?, cant find anything on Maxtor Website, Another question, there is allso an option to do a Low ore High level formatation of the drive. I have heard that this could fix corrupted segments, If so,this must only be possible on logical damaged hardrives, not psycial damaged drives right? i have waiting with reformatation cause im unsure what type damage the drive have, and this is my last alternative to do.? should i do a low/high level formatation anyway?
The Plug & Play Software Device Enumerator is failing to load the required drivers. now i've done alot of searching and i've found a solution that worked for others uninstall Plug & Play Software Device Enumerator from the Device Manager find the 'machine.inf' file and copy it to your desktop open your copy of 'machine.inf' and delete the following (on line20)- ExcludeFromSelect=* then, Add new hardware. follow the steps until you see the Have Disk button click Have Disk and select 'machine.inf' from your desktop[not sure abt this step] if you need to, re-install your sound drivers
Got a bit of a problem with my housemates pc.A friend gave him some extra RAM, i checked it out and it was crucial 512mb pc2100 CL2.5, and although it didn't match his exsisting RAM it seemed to me that his mobo would only run the FSB at 200mhz anyway so i went ahead and fitted it.It worked fine I then noticed his system temp was running a little high (60-65 degrees), so i took his heatsink off and cleaned the dust and refitted it with some new thermal compound.I added too much and the temp went up. To nearly 90 degrees.I shut it dwon as i didn't want the cpu to pop, cleaned it off, reapplied less compound and figured this would work fine.Now we have the problem. Most of the time: Power on and nothing happens. No bios, no beeps. Occasionally: Power on, i jump into the bios, the temp looks fine (30-40 degrees) and then it freezes right there in the bios after about 30 seconds to a minute.This sounds like a heat issue, but the last temp reading before freeze is 33 degrees.?I've double and triple checked that the heatsink is on properly and thats fine. I followed the official guide on how much compound to use (a blob the size of an uncooked short grain of rice).
okay at first this wasn't too anoying but now it is a major problem at first it was just that when i went to windows update it would get stuck in the thing where it says that it is checking for the latest updates.to try and solve this issue i did these things:i ran windows update for 3 days straight and didn't do anything on my computer (it was stuck in the screen i mentioned before)i reinstalled windows, but for some reason the problem carried over a friend of mine told me about windows defender and that it was free, so i installed it and behold it uses windows to update and im stuck with the bare bones of the program.
I have a Logitech M305 wireless USB mouse that my XP won't recognize on any port. However MY XP recognizes my wired USB mouse and printer, and scanner. The M305 works fine on my other machines?
i have MCE and whenever i try to play a video or tv, it says that the files needed to display a video are missing or corrupted. How can i fix this. The videos work fine in Media player, but not in Media Center
I am using the IIS on Windows XP to test pages I develop. Is there a limitation that Includes are not processed? I know they work on the server but do not seem to work from the local IIS install.
I just got a laptop with 200 server installed on it and I would like to learn about it. I need some help with what I thought would be a simple setup. I want to set up 2 users for this laptop. myself and my daughter. I have it set with myself as the admin and her as a user. I want to be able to limit the amount of damage she does to the poor thing. My main question is how to set up certain programs to work and not work for her. I have one program music match that works in admin but not on user even though it seems to say it will work for users. From what I have seen from this operating system its not real easy to set it up. I have a book from the library but its a que and not good for me. Any advise on a good book would be great. I know it would be easier to use xp or win 2000 pro but thats not nearly challenging enough for me.
I have a Toshiba laptop satellite series A205-S5814.the time i bought it the USB ports were working but after a period of a year they are no longer working I updated the drivers but still now. I also changed the operating system that is from vista to XP but the problem persisted. It did not stop on that only, the DVD-ROM also failed to read DVDs.
i bought a new road adventures USA game and it says it will work for windows XP, Me, and 98 but my computer is a windows 7 so will this game work on my computer or not? i cannot open it and see if it works because if i do and it dosen't work i will not be able to return it.
Device Manager malfunctions after you install Windows XP Service Pack 2 View products that this article applies to. Article ID : 893249 Last Review : October 25, 2007 Revision : 3.0 Notice The hotfix that this article describes has been replaced by hotfix 914450.
