Online Update Keeps On Failing For Several Programs?
Feb 21, 2009
I have malwarebytes antimalware, ad- adware and spybot search and destroy installed in Windows xp service pack 2, 32 bit.All 3 has problems updating with the following error messages: malwarebytes update failed. Make sure you are connected to the internet and your firewall is set to allow malwarebytes anti malware to access teh internet.ad-adware connection error,check your settings.spybot search and destroy not seeing new updates.Also when I search the problems online the,I am denied access to the support pages for those problems.The web page is not being displayed just as if I don't have internet access
hope someone can help me! I have windows XP and a while ago IE stopped being able to download, i have resolved that by reinstalling IE, however about the same time my windows update installations were failing and i thought it was because of my download problem in IE however now IE is fixed but i still cannot install windows updates.Before anyone tells me to go into tools, options, security blah blah, i have done that already but it has not resolved the problem. The error message i get is just a box that says updates were unable to be successfully installed then a list of the updates it was unable to install, but no reason for the error or number is given.
Compaq Presario 6470NX running Windows XP. Automatic updates are continually trying and failing to update my system. One of the popups I get is: "SQLDUMPER library failed initialization. Your installation is either corrupt or has been tampered with. Please uninstall then re-run setup to correct this problem." I restored to an earlier date and that went away. But, I'm still not getting my updates done. Last Tuesdays are (KB928365, 928366, and 928367).
just recently i did somthing to my computer i have no clue wat the computer than started to come up with this intel this n says error 111 down the bottom...press F4 thing.i press F4 n it goes to bios setup utility..than i usually just press escape n enter[ok] and at the moment it goes to the black screen where u choose wat to use..eg start windows normally, safe mode, safe mode with networking. i use the last known working configuration n the loading windows black screen comes up n my computer than restarts...can someone please tell me how to fix this. i feel like throwing my computer out the window! its 1 1/2 yr old
2.2 GHz Athlon 64 512 MB DDR2 Windows XP Media Center Last night, the right-click function on my optical mouse starting acting up, wouldn't work unless I pressed hard. As I was furiously right-clicking on the desktop to get it to work, all of the text backgrounds on the desktop icons turned from invisible to black. Oops, no problem, I thought, I'll restart and it'll return to normal. Nope. So I right-clicked (replaced the mouse with a PS2 model, works fine now) on the desktop, went to the Desktop tab, Customize, Web, and unchecked "Lock desktop items". The icons looked fine after that. More weirdness followed: when I went into hibernation, no problems (it stated "preparing to hibernate", etc.). But touch the mouse, and it returns to life as if in standby mode. All the power settings are normal for using hibernation. Please don't tell me to not use hibernation, I've always used it with no problems. No new or weird processes running in the background. What on earth could my idiotic right-clicking have done to my settings to result in these two problems? Oh yeah, I did update Windows a few hours before this, but the hibernate feature definitely worked prior to my problem. I'd hate to have to restore to the previous restore point since I'm on dialup and I hate updating Windows manually.
I have never had a sound problem on my computer until very recently. I can restore it back and the sound is restored. However, every morning, the sound is "gone". I then restore it back to Sept. 14, and the sound returns. I use the "automatic update" feature. Last night after I restored back to 9/14, I changed the option to "notify me of updates". So far, this morning, I still have sound. Is it possible that one of the automatic updates is causing this problem. Or do you have any suggestions as to what may be causing it. By sound, I am just taking about the sound you hear when you reboot or play online games not the cd room
Hey, I just reinstalled Windows XP Pro SP2 (I've done like a hundred times before). After Installing my WiFi I install Norton 360, theni fully update my PC with Microsoft Update. This meant Downloading Service Pack 3. I've had Service Pack 3 on the same PC before. Whenever I try to install updates now they all totally fail with no error codes, and Winodws Live Installer fails all its installations. I manage to be able to install .exe applcations fine. but its bugging me not to be able to instal MSN
I am running Windows XP (SP2) on an eMachines T2080 desktop. All Windows security patches and other OS updates are current. McAfee virus scan is run weekly, as is SpyBot S&D and AVG/Ewido. I am running a GeForce FX 5200 graphics card with up-to-date drivers
The problem is, while using this computer, i had a hung-up process that was slowing things down. After doing CNTL-ALT-DEL to see the process list, i accidentally shut down the explorer process, thinking it was a hung-up internet explorer. Naturally, the computer shut down, but ever since, it does not seem to want to boot appropriately. From a cold power-up, it will go through the "Windows" logo screen with the blue scrolling bar for about 10 seconds, then the screen goes black and stays black for about a minute. Rather than coming to the light blue screen where the user-id's live, the system instantaneously flashes a "blue screen" (with some white characters on the screen), however, it's so fast that I can't read it, nor can I get a screen shot of it. Once that blue screen flashes, it goes back and tries to boot again, only it gives me the options of safe mode, start windows normally, start from last known good configuration, etc. I can boot up just fine in safe mode, but the blue screen phenomenon happens for all the other options. I have tried a system restore to a previous day, and that doesn't work either.
any ideas on how to proceed, short of an OS reinstall / repair. I have seen some suggestions for CMOS battery replacement,I can copy any utility files I need just fine while in safe mode, but I'd like to try and do additional troubleshooting
My computer has automatically tried to install it over 30 times now, and i tried manually about 5 times, and everytime it just fails, and doesn't complete! PLEASE HELP!
I copied/cloned my failing C: to a drive on USB. C: drive has now failed and I need the copy to become bootable. Why can't this question be a simple answer. What happened to fdisk utilities?
For the past several days, MS has been downloading and trying/failing to install their MS NETframework 3.0 service pack1 (KB959300) update.can anyone tell me what to do so it can go ahead and install?
I installed Windows XP Pro over my Windows XP home a few days ago. My Windows XP Pro seemed to be working fine except it didn't feel or acknowledge my built in speakers and various other hardware. My dad said this might stem from the fact that the Windows I have (being from 2001) is older than my laptop. He suggested I DL the service pack onto on desktop computer, put it on a disk and open it on my laptop and install. I did that, and everything seemed to go fine until I restarted my PC as I usually do when I install new software. My laptop told there had a been a error that Windows was failing to boot properly due to some failed installation of software or failed hardware installation. It had a few options like "start with the last known configuration of windows that worked on your computer" so I did that. And I tried the other options too. But after a few screens of the usual booting up stuff my laptop just goes to a black screen and I can't get away from it. Windows Support won't help me so I'm asking you guys.
I installed XP x64 (Yes, I know, that was a mistake) on my machine a while ago and was tired of having to put up with all the incompatibility issues that had been arising, whether it was not having iTunes work properly to even some of my favorite software just not loading and prompting me with error messages.
Running XP Pro and SP2. For some reason my icons in my bottom Right hand tray keep losing themselves. The only ones shown are my Wireless Adaptor, Bluetooth and Kaspersky. But when I go to Control Panel, Sounds and Audio devices Properties and turn the icon on and 'apply' etc. all of my missing icons pop up, "sound, wireless connection, cable network connection and safely remove hardware". But when the system is restarted for use at another time, Its back to as described with missing icons. I've been into Control Panel, System Services and down to Universal Plug and Play properties, this was set to "Manual" to which I changed to "Automatic". I did this following a subject at MSN Knowledge. But again starting the system today its just the same. One thing not mentioned, I did a registry clean a few weeks ago, whether someting had changed at that point.
At random times, my Firefox will freeze, and I have no other choice to get it away but to restart my entire computer, and that is VERY annoying.And at other times, explorer.exe (obviously the start menu, task bar, etc) just fails by saying:"Explorer.exe has encountered a problem and has to close. Sorry for the inconvenience."
lately my computer has been having these symtoms:- Hanging while left on and not used- Crashing Randomly, maybe 5 Minites into startup- Failing to start with a black screen where i should reach the login screen but i dont- Failing to start with the message "A Disk Read Error Has OccuredThe only way i have found around these problems, was taking the case off and disconnecting wires to the hard drive or the mother board and then putting them back in, even then i may have to restart it once or twice.
I've got an HP / Compaq notebook where the smart diags indicated a failing hard drive, HP shipped me a replacement drive under warranty and I removed the drive and used a couple of notebook hard drive adapters to hook them up as master and slave on the secondary channel of one of my desktops. I then used Ghost to clone the failing drive to the replacement since I really didn't want to have to reinstall all my applications again. The clone completed without any seeming problems however I haven't been able to get the new drive to boot up, the problem is that I just get a blank screen with a flashing cursor and no boot menu, end of story...
I happen to have a Win XP Pro full version CD and I am able to boot from the CD to the recovery console, I've tried the following: Chkdsk /R - Did find and fix some problem the first time around, but didn't find anything wrong on subsequent runs. Fixboot - ran with no problems but still no go. FixMbr - indicated "This computer appears to have a non-standard or invalid master boot record", no matter how many times I've run this and it says it's rewritten the MBR successfully it still says the same thing. In-place upgrade - I've run an in-place upgrade twice and both times it completes and says the system will reboot and the installation will continue but it still gets stuck on the reboot. Following the two in-place upgrades I've rerun all of the previous steps and I still can't get it to boot, nor do I get any type of error message that indicates what the problem is.
When I startup Windows XP I get the following message:
"Windows cannot create a temporary profile directory. This may be caused by insufficient security rights. If this problem persists, contact your network administrator"
DETAIL: Insufficient system resources exist to complete the requested sequence
My computer is Toshiba Satellite A215, with Windows XP home edition. I had Service Pack 2, but about a week ago, I updated to Service Pack 3. After installing Service Pack 3, the whole computer slowed down and started acting weird. The speaker started to make noise, it started to show error messages often, the internet does not work smoothly, spyware & virus search take 10 hour or more and never finish (it used to take only a few hours), etc.
So, I wanted to put the Service Pack 2 back to my computer. I tried uninstalling SP 3. But it failed uninstalling and I got a message says something like "couldn't uninstall SP3". I thought it might let me uninstall if I restart the computer and I tried to restart, and it never start again. This blue screen with a message, something like "autochk program not found-autochk skipped" comes up and then it goes back to the Windows LOGO screen and keeps doing the same thing. I read about some similar problems, and tried a few things, like starting with safe mode or last setting that worked, etc, but they do not seem to work....
I have a hardrive( Maxtor 6Y200P0) wich have got corrupted and bad segments. (this seme to be a common problem with Maxtor drives) Im almmost sure this drive have psychical damaged clusters, cause i have tested alot & alots of tools that should fix this has failing in repairing this damaged clusters and segments. this includes Maxtor official PoweMax v 1.21, wich fails to complete the surface test. i have got an Error Diagnostic Code=de676679. a code with a 8 numeral should indicate that a Maxtor Drive drive is broken,and is in need of replacement. thats all i know where should i send this code for a real analyz?, cant find anything on Maxtor Website, Another question, there is allso an option to do a Low ore High level formatation of the drive. I have heard that this could fix corrupted segments, If so,this must only be possible on logical damaged hardrives, not psycial damaged drives right? i have waiting with reformatation cause im unsure what type damage the drive have, and this is my last alternative to do.? should i do a low/high level formatation anyway?
The Plug & Play Software Device Enumerator is failing to load the required drivers. now i've done alot of searching and i've found a solution that worked for others uninstall Plug & Play Software Device Enumerator from the Device Manager find the 'machine.inf' file and copy it to your desktop open your copy of 'machine.inf' and delete the following (on line20)- ExcludeFromSelect=* then, Add new hardware. follow the steps until you see the Have Disk button click Have Disk and select 'machine.inf' from your desktop[not sure abt this step] if you need to, re-install your sound drivers
I have recently just moved to another city. I had Comcast broadband service before which worked great and now Im hooking up with Comcast again on the same computer but in a different city. But somehow my computer (home pc) cant get back online anymore. Do I have to do some kind of reset on ip address? please advise. I'm using XP Pro service pack 2.
after upgrade my OS to windows xp sp2. i did a clean installation my ip address has change for what reason i don't know? i can get online if is anybody who can help me to fix this problems
I reformated a mans pc the other day here at home but i took it to his house to get port #'s to get online for updates.We got 3 updates restarted and went back to updates and got pop ups galore.reformatted again OFF-LINE and still got pop ups. I have the pc at home again. What am i dealing with here?I am now in the process of installing ONLY the XP CD and not the other 3.
It has been 5 days since this problem started. The computer freezes, sort of lags for about 2-3 seconds only while I'm online. It happens about every 15 seconds, but sometimes gets random. Offline there is no problem. I'm on a wireless network (Netgear), none of the other computers have this problem. While it freezes I can still move the mouse and click things but nothing loads for the 2-3 seconds. I'm getting normal temperatures on the PC so I don't believe it's overheating.I did a system restore and it didn't fix the problem. I have also ran several antivirus scans with AVG Pro 7 and PC-Cillin 2005. I've also done scans for worms such as bagle. I've ran Spybot/AdAware/MS Antispyware several times, no pick ups.
My computer has been freezing randomly for the past couple of days. I have run spybot, microsoft anti-spyware, ad-aware, and norton. Found a bunch of spyware that was successfully removed. No viruses detected at all. Had a friend who does tech support remove a bunch of startup items on my computer too. I usually have my computer connected to the Internet (cable modem), however, just to see what would happen i disconnected it during the day yesterday and it hadn't frozen by the time i got home. It appears that if i'm disconnected from the Internet my computer has no problems, however when connected sometimes it'll freeze after 5 min, sometimes after a few hours. When it freezes i loose control of everything: no mouse movement, caps lock key light won't turn on etc. have to press the reset button each time. Then it starts up and works fine. The computer i'm using is a Toshiba Satellite A-70 notebook. OS is Windows XP. Up until a couple days ago i had no problems with it at all.
Apologies for not scrolling through reams of searches but I'm struggling to get to grips with my 'new' XP computer. Sadly, my much loved '98 computer bit the dust on 14th March (as the result of something I allowed a security program to do), and I was unable to revive it.Now I am back online and having to d/l and reinstall all the programs I had on the old computer I find I have things spread over three User Accounts!! I have been looking through the Help files but I thought someone might know of a useful online 'idiots guide' which could get me off to a less confusing start?
I run XP with a broadband connection that works perfectly for browsing etc. However, when I click the "help" button in any program that uses a web based help system I get an error screen saying that my PC cannot connect to the internet.
I recently tried to use my webshots program to install their calendar to my desktop, and it wound up sending my computer into 'safe mode'. So a friend installed Windows XP Pro for me, and it worked beautifully, got the computer up and running again just fine....but now I can't get online. No internet what-so-ever. I called my internet service Tech guys, they sent me a new modem, and everything there works fine this friend also lent me her old computer, which is what I am using right now, which is how I know the stuff works.
I hope this is the correct forum for my problem. I'm unable to get online on my notebook computer although I can log on using my desktop computer! This is driving me crazy, I've tried everything I know, rebooting, system restore, virus check, ran spysweeper, checked the settings in internet options/connections, did renewal of ipconfig/all, etc, but all to no avail. I have a pentium M with Windows XP Home Edition SP2 and have a dlink router connecting both computers via ethernet cables. The internet connection icon in the taskbar area shows that I'm connected, But when I try to open a web browser (IE) I'm getting a "Cannot find server....page cannot be displayed".
