I've just got a new laptop (Dell Inspiron 1545; Celeron Dual Core T3000; Dell Wireless 1397; Vista SP1 Home Basic with Media). Not liking Vista I decided to re-install my old Windows XP (Home Edition SP2). I had already set up the Wireless connection so I went online and got information on how to install this new OS whilst keeping the Vista one on the same HD. I set up a new partition, installed XP...and now can't access Vista or get any wireless. I've tried going into Network Connections, but I don't have a wireless connection icon, there's no choice for searching for local wireless connections & I'm completely flummoxed!
Anyway, I've tried to find out how to restore my wireless - I've re-installed the XP System Software (which was for an earlier Dell Inspiron model btw), tried installing the ISP Eurotools system software as well. I have tried to set up a new network connection etc, but obviously what I really need is for my laptop to detect the available wireless connections so I can re-join the wireless network we use throughout the house. I'm currently borrowing my dad's laptop, and am really hoping someone will know how I can fix this problem!Also, please note that I'm mostly a novice at computers, so I'd really appreciate step by step instructions on how to correct this.
I had the XP Security Center virus and, perhaps foolishly, reformatted - or more formally, "system reformat" for "returning the computer to factory conditions", as my friend who helped me with this process called it - my computer and reinstalled the operating system. But when I turned it on for the first time, there was, naturally, no internet connection. However, while I would normally proceed to set one up, there was, for some reason, no "View Available Wireless Networks" option when I right click on the little connection icon at the bottom right hand corner of the screen.
I recently changed my OS from Vista to XP Pro. Wireless worked fine on Vista and was brilliant. Now however, I am unable to see wireless networks in the list, without following the instructions on the Microsoft Knowledge Base website, which occurs every time my computer is restarted. This is annoying, because , if i dont have the net I cant see it and is also time consuming. Also my wireless connections are less stable, and I keep disconnecting.
Just yesterday, my wireless was working. I have not added or removed any programs. Today, my computer shows that my wireless card is working properly but it is not finding any wireless networks in range, which is wrong. Yesterday, while at my apartment, I could see 9 networks, today I see none. When I go to the coffee shop, it does not see that network either. Right now I am sitting at my school and it is not picking up the network in here either. Everyone else around is picking up the network, just not me. I have checked everything and cannot figure out what the problem is. I have a Compaq Presario R3000Z, running on an AMD Athlon XP Processor (3000+), 800 MHz and 2 GB Ram. Running XP Pro w/Srvc. Pack 2.
My internal network card is a Broadcom 802.11b/g WLAN. I even uninstalled this and rebooted and after reload, it still does not want to pick up any of the networks. Any ideas where I can start? Already tried the program that fixes corrupt TCP/IP drivers (WinSock XP) and it did not work. Again, nothing was changed prior to this problem. All the settings are the way they have been for the last 3 years.
after having good wireless connection,my desk top PC shows no wireless networks in range, although the wireless adaptor is shown as working,and connection to the router is ok from my laptop,how can I reset my desk top PC?,no,restore facillity available
My son had his Dell laptop at college and was using their wireless network successfully. He came home last week and tried using his laptop on our home wireless network (w/Linksys router). He said he was not able to always connect so he tried to set up (configure, repair) the wireless connection himself (always a dangerous thing to do).Now he gets no internet at all (IE always goes into 'offline' mode) under Windows XP home.I've tried to trouble shoot the connection but so far I have been unsuccessful. The laptop can see the wireless network (it shows as available and connected). There is something wrong with the network connection that IE uses but I don't know how to go about fixing it.
I have a laptop, HP dv6000, with Vista previously installed. Yesterday, I created a partition on my hard drive and installed XP on it. So, ideally, I should have two windows system installed. Maybe in fact, there are 2 systems installed. However, the problem is after I installed XP, it directly loaded into XP without letting me choose which system I wanted to load into when I restarted the pc. In other words, I can not log in my vista system now.
I recently downgraded my HP PAVILION DV6500 from vista to xp because I was having complications with connecting a dial up plus other downloading other softwares. Now that my system is with xp, I have lost sound and some other drivers. I have tried downloading several drivers but none seem to work. Right now I have a laptop without sound or even VGA.I need help.Please,if anyone can send me a software to get back my sound and other drivers I will be most grateful. I like my laptop and don't want to lose it.
I've installed an Access database on our network. Can I connect to my db while it's on the network using IIS? I've tried in the past and have always gotten the message telling me that the db has to be local.
Am trying to set up a network with xp Home edition. I am curious about a couple of things. What is the difference in copying verses moving a file to the shared document folder? I would thing that by copying it, one is "duplicating" it and thereby using up resources. IF that is the case, when you access a file and make changes, are the changes saved to both places?
I switched ISPs and the rep came to my home to help. He could not get a connection, so he installed some different lan cards until one worked. Since then, I installed a Wireless. Now, I have several drivers under networks in device manager that will not uninstall. Why? and how can I uninstall them like other devices there?
If you have ever used a computer at a high school or college, then you might have seen that pesky software that prevents you from installing any programs or web content filters that prevent you from accessing instant chat sessions. Well here is a way to send instant messages to your friends over such networks as long as you have their ip or the name of the computer on the network. An easy way to find a computer's ip address is to type cmd in the run box on your start menu. This will start the command prompt. Type "ipconfig /all" with a space between "ipconfig and /all".That will list the computer's ip address along with other network specs. Now that you have the ip of that computer, you may send instant messages to it.Go to the run command in your start menu. Type cmd in the box which will open the command prompt just like above.Type: net send "ip address" message. If the computer you were trying to send a "Hello" message to had the ip address of 127.10.1.1,you would type "net send 127.10.1.1 Hello" Additionally, it is possible to use a wild card such as * in the ip address parameter. Example: net send * message
The above command will send your message to every computer on your subnet. This is great for system administrators to send out messages to all windows computers on the network notifying them that you are going to be taking down the server or something. However, if you are a student and feel like pulling a prank at school by sending some message across the school network, you will screw yourself. With today's zero tolerance policies in schools, you will be suspended possibly even expelled. Trust me; it's happening all over the USA.
Apple introduced a new social network in the latest version of iTunes called Ping that allows you to "follow your favorite artists and friends to discover the music they're talking about." If you are a music junkie that does not use Facebook you will love the service, for everyone else, almost all of the features already exist in the Facebook world. Although using Facebook may not be as elegant as using Ping, it is worth the few extra clicks to avoid another separate list of friends and likes.
My problem is : When I called Verizon yesterday, I was told that to connect the printer to the router, I do not need the print server. I was asked to locate the ethernet port at the back of my printer, plug the ethernet port cable and connect it to the Verizon router. Unfortunately, my printer does not have an ethernet port. I was told to call HP,and I did but did not get much help.What should I do to get my wireless printer work? I have a PC and a laptop. Prior to Verizon, I have a DSL and Vonage, both routers and print server did not have the same problem.
I took my daughters Gateway M320 laptop and did a restore from the CDs that came with the laptop. After doing all the Microsoft Updates, ALL the wireless driver installs from Gateway there is no 'Wireless Network Connection' icon. I have also checked Device Manager and there is no wireless adapter. Before this exercise she was running wireless fine. It does work 'hard wired' but no wireless icon.
I'm trying to make a dual boot system Vista/XP with my HP Media Center purchased in 2007 with Vista pre-installed. Inside Vista I created the partition for XP (disk D and rebooted with the 'XP Pro SP2' inside. After selecting its correct partition for installing it copies all files on hard disk and it reboots in order to start its installation, upon rebooting and starting first time from hard disk, it says that there is an error in the system and stops. If I install only XP on the system it works correctly even though some newest hardware is not recognized. I had already made a dual boot two years ago with a 2007 XP Student Edition and it smoothly. If it is due to the XP version being too old that maybe cannot deal with the boot record created by Vista Or perhaps such an old XP cannot recognize a boot hard disk that is not C:? Is there a way to bypass this point (perhaps fixing the boot record) in order to continue correctly the installation? Thank you, Al
I originally had Vista Business edition on my laptop and decided to dual boot with XP. So far I created a partition on the same drive (C: ) as Vista and installed XP on it. how do I choose between Vista and XP when my computer boots up? When I turn on my computer it boots straight into XP and doesn't show that menu where it gives me a choice of which OS I want to boot
Is it possible to have a Vista based system and then load XP on the same system and switch between the two. I know mac's have something similar to this but i have an HP dv7 pavilion notebook with an AMD Turion x2 Dual-core mobile RM-70 2ghz processor, 4 gb of ram, ATI Radeon HD 3200 graphics chip set, and 156GB of free harddrive space
just ordered a new pc that is on its way pre loaded with WIN XP PRO SP2. It also come with a free VISTA BUSSINES upgrade. I want to set up a dual boot system when i get my VISTA disk. should i use partition magic and set up a new partition for vista or is there a better way of doing this
I initially started with XP and created a separate partition for Vista, installing Vista on the other partition, Vista sees the (XP) Earlier version of windows. When I choose XP, I get the following error: NTOSKRNL.EXE is missing or corrupt. If I repair the XP with fixmbr - I end up screwing up Vista. Then when I repair Vista, it end's screwing up XP
does ne1 know if vista can dual boot with xp no problems yet only wonderin cuz we are very close to vista, and i want it. i cannot use my dorm room internet with vista cuz of bs security shit.
The wireless internet isn't working... I don't know what wireless card I have.. I should only have to install the driver, but I can't get online to download it.
We have two laptops and one wireless (HP Photosmart C7280) printer. Our laptops both connect to the internet wirelessly through a router. I was able to install and can print wirelessly from my laptop (a Mac) with no problems. However, we cannot figure out how to print wirelessly from my boyfriend's laptop (a Dell). We have installed the printer software and the printer itself on his laptop, and the laptop is able to identify the wireless printer over the network. We made sure that the printer is set to "online" and that file/printer sharing is turned on. But, whenever we go to print any kind of a file, we get an error message simply stating that the printer was unable to print and that we should run the troubleshooter. So, we run the troubleshooter, and we get this message:"The troubleshooter was not able to ping (detect a connection with) your print server. This might be the cause of the problem. Verify that your network is configured correctly and that you are connected to the network."
I am more used to working with Macs and my boyfriend is computer illiterate, so we're a bit lost as to what this means. I was able to set up a wireless network connection on his laptop, but beyond that I'm not sure what else to do. Most of the other advice I've seen online involves a wireless printer that is wired to one computer, and another laptop trying to wirelessly access that printer through the connected computer...if that makes any sense. Our printer isn't wired to anything, and we just can't figure out why it'll print wirelessly on the Mac but not on the Dell laptop. Any ideas?
I have aproblem with my XP machine.when i boot up the small wireless icon says its not connected,Also when i click to view available wireless networks that there are none in range, i reboot the pc and it might resolve it .More often than not it doesnt.Also i sometimes get a yellow exclamation mark over the wlan in device manager.I update the driver and it resolves until next time i boot back up the pc.Wireless switch is on. My 2 other pcs wrk perfect.
Does anyone happen to know how to successfully create a network in Windows XP Pro for a wireless laptop and for an Ethernet-hooked-up (non-wireless) computer. I'm trying to printer and file share the two together BUT I've exhausted myself in trying to make it happen. Has anyone successfully done this? Am I missing something? Perhaps hardware?I would truly appreciate any help or advice.
If i log onto my computer and just go into network connections, the computer is not able to look for wireless networks. if i hit the button to find networks, it gives me some strange error message. i have noticed though that i can fix the problem if i manually go into services and start the wireless zero configuration service myself. i configured this service to start automatically, and to keep restarting if attempts to start fail, but for whatever reason, the service does not start on its own when i boot the computer. once i start the service, i am able to connect without any problems.
The error message i get says something about finding more than one wirless device. i have a belkin usb wireless card, and before i installed the one i have now, i had another that coincidentally was the same size and also made by belkin. thinking that maybe some software was still on the computer, causing it to find both, and consequently not being able to connect to either, i uninstalled all the software for both routers and deleted all the related program files off of the computer. then i reinstalled and...got the same exact problem.
I was dual booting XP and Vista but didn't want Vista anymore. So I got rid of Vista, and that's all said and done now. Problem is, the boot loader is still coming up telling me to choose between "Earlier Version of Windows" and "Windows Vista". How to I get rid of it without using Vista's boot manager?
I'm currently running Vista on a raid 0 array, and want to dual with XP. I have two partitions, one with vista and the other that I tried installing XP on. After it finishes the initial installation and restarts it says to press any key to boot from the CD. I wait without pressing anything and than it says that there was an error reading the disk. If I remember correctly, after it restarts it goes strait into windows setup. This happens every time I try restarting, but I can get back into vista by putting the hard drive to boot first. In vista I can see the other partition where XP was installed, and inside is just a folder titled WINDOWS and it seems like all the windows files are in there
It had Windows vista in it and she had someone put Windows XP in it. It now has a virus and my friend wants Vista put back in it. I have a cd here that says TOSHIBA recovery and applications / drivers, Satellite A130/ A135 series, Windows Vista Home Basic 32-bit. I put this cd in the rom and restarted. it did nothing. just loaded XP up again.
