I've installed an Access database on our network. Can I connect to my db while it's on the network using IIS? I've tried in the past and have always gotten the message telling me that the db has to be local.
View 1 Replies
Just yesterday, my wireless was working. I have not added or removed any programs. Today, my computer shows that my wireless card is working properly but it is not finding any wireless networks in range, which is wrong. Yesterday, while at my apartment, I could see 9 networks, today I see none. When I go to the coffee shop, it does not see that network either. Right now I am sitting at my school and it is not picking up the network in here either. Everyone else around is picking up the network, just not me. I have checked everything and cannot figure out what the problem is. I have a Compaq Presario R3000Z, running on an AMD Athlon XP Processor (3000+), 800 MHz and 2 GB Ram. Running XP Pro w/Srvc. Pack 2.
My internal network card is a Broadcom 802.11b/g WLAN. I even uninstalled this and rebooted and after reload, it still does not want to pick up any of the networks. Any ideas where I can start? Already tried the program that fixes corrupt TCP/IP drivers (WinSock XP) and it did not work. Again, nothing was changed prior to this problem. All the settings are the way they have been for the last 3 years.
I have three computers that i need to connect to each other and to my network. What I want to do is put 2 NICs in each of the three computers and connect Computer A to Computer C and Computer B to Computer C via crossover cable. The second NIC in each of the three computers will be used to connect each of the computers to my network
View 5 Replies View RelatedMy wireless connection says that it is connected to the network, but can't connect to the internet. Tried to repair through MSN and said that my default gateway is down or something of that nature.
View 1 Replies View Relatedi reformated compaq laptop presario 700 have WAN network driver and bunch of aol stuff
Aol uninstall not in Add/Remove list shouldn't i be able to connect the cable modem here at work to this laptop i've been working on?i plug cable in and no connection to interenet.am i forgetting a basic thing to do?
This is my boss's daughter laptop that was Kazaa infected so i reformated.
I had a problem trying to connect my Canon Pixma 4000 so that I could access it wireless via our home LAN. I have one laptop(the wife's) attached directly to the router (cable service from Optimum). My laptop is used wirelessly from another part of the home. All was working well, except I could never get the printer to work so that I could use it wirelessly, so I had it plugged in directly to my laptop. Up to this point, it was all ok. I have AVG and ZoneAlarm running on both computers. A friend, (really) was at my home and volunteered to connect the printer so that it would work wirelessly. He is a UNIX administrator, manages a number of pc's too. I thought, "this is great, my own administrator".
To shorten the story, he removed ZA, the computer will not work wirelessly, only works when connected directly to the modem and the printer doesn't work wireless. I called ZA, and they guided me through removing all the "orphans" that were left behind, so that cleared up a problem whereas I could connect to the net, but couldn't get to another url. I did not re-install ZA yet, because I don't want to add anything else into the mix. I will post a HJT log if that is what is needed. I DO NOT care if the printer works wirelessly. I will live with it connected to the back of my computer, BUT, I do want my laptop to work wirelessly so that both me and my Frau can be on-line at the same time. I have been through the IP address checking, all is ok there. If I try to connect via the SYSLINK wireless, I get nothing, even PING ing different sites gets no valid response. Regrettably, I have some tech knowledge, but not enough to figure out this one.
I have just installed Windows XP and am trying to connect to a network via Ethernet on a Compaq Presario SR5130NX.I have green lights on the network cable and when I boot into Ubuntu (Linux), the network works fine. In Windows XP, when I go to Control Panel > Network Connections > Set up a home or small office network, I get a message: "The wizard cannot find your network hardware." Under Device Manager, there is nothing to do with network components, so I'm pretty sure that I need drivers.
View 3 Replies View RelatedI have read that you can get network connections such as Dial-up, and VPN to connect at boot of windows using windows services. - But it did'nt say how. I have found out how to add a new service, But I don't know where the root for the network connection I want to connect to is. Can anyone give me any advice or tell me where the network connections root is?
View 7 Replies View RelatedI have had numerous problems with my PC - including disappearing icons, connectivity problems (I have cable internet and all seems to be in order but I can't connect a lot). I also have settings on my PC that somehow change themselves. So, I've read through the forums and decided to try the Hijack this solution and was hoping someone could help. I also cannot use Internet Explorer - I get a window that mentions internet settings. Before that window came up I saw something to the effect of c:windowssystem 32 error.
View 11 Replies View RelatedI can't get it connect to the internet. I know the connection is good, because I can see other computers on my home network, and those computers can get to the internet (like this one). The Bad computer has IE 7, which loads ok but then I can't get anything on the web. Also have Mozilla Firefox loaded which I was using for a while, but now it won't even open up.
View 10 Replies View RelatedI just installed XP pro Sp2 over Vista Home Premium on my laptop. Please note that I originally had XP and upgraded to VISTA (big mistake) a year ago. The installation process went well, however I can't connect to Internet. My network connection shows that I have a connection. I tried to do ipconfig from command menu and did nor get any IP address.
View 14 Replies View RelatedMy home wireless network is connected at excellent signal strength, and the other computer on the network can access the internet, but once or twice a day, none of the browsers on my operating system can load anything until I restart. Also, TrendMicro can't update until restart. Possibly related: The last time this happened, I checked task manager and found two copies of rundll32.exe, but only one copy once I restarted. The computer was nuked about a month ago, I've kept my user privileges to the minimum and I perform frequent updates and scans, so a trojan seems unlikely, but maybe it's a driver problem? Also, on one occasion the wireless showed limited/no connectivity, but this is not usually the case.
View 3 Replies View RelatedI tried to install ZoneAlarm last week which crashed during the installation. This has caused multiple issues:1 - Can't shut computer down - I can get to the "log off", "shut down" and "restart" option of which none do anything so I'm forced to unplug as the power on/off doesn't work either. I've checked the power management options and these are normal.2 - Can't connect to the internet via my network card. Replaced the card as the network cable works on laptop and though it was the card but no luck(Modem goes to router which splits to 2 PC's and laptop
View 3 Replies View Relatedi am unable to connect 10 systems using windows xp, i am using dlink 16 port switch, each systems detects network at a speed of 100 Mbps, the network is not connected to internet, so i used manual configuration of ip. all other settings i know of is ok, the fire walls are off, it uses norton antivirus. what do i do to get the systems connected. pls help it is hanging on my neck.
View 3 Replies View RelatedMy toshiba laptop detected the wireless network in range, but when I try to browse nothing comes out!!!will reinstalling the windows solve the problem, to ensure that all drivers are defined??
View 1 Replies View RelatedWhen i connect to the internet, The Icon of the two small computers does not go to my Task bar ( near the tasks eg: msn messenger ), until i go to My Network Connections, Right click and press Refresh... i mean it does'nt go automaticaly, same as my network connection when its aquiring the ip, it stays there in my tray until i refresh my Network connections, Anybody knows a workaround ? I don't have any idea why that happened, i don't remember missing with anything
View 3 Replies View RelatedMy dad's Dell 8400 is having a series of issues. He posted a similar thread in the Hardware forum, but it's possible it might be more than hardware, so checking here to see if ya'll might have some suggestions (as I know this forum gets more visibility and he's getting anxious).He turned on the computer last night to have it not booting up at all. It gave a series of 4 beeps followed by 2 beeps, and then wouldn't do anything after that. He tried multiple times, with one or two of them bring him to the BSD asking to boot in safe mode or system restore.
View 3 Replies View RelatedI am at a friends house and one of their computers are not connecting to the internet, they have a network set up and all tha good stuff and its working fine on allt he other computers BUT hers. She recently moved her desktop from the floor to her desk to get it away from the pet hair, and i made sure the wires are all in good condition and plugged in correctly. The computer will not repair the connection nor will the internet work.
View 2 Replies View Relatedname of pc is not accessible. you might not have permission to use this network resource. contact the administrator of this server to find out if u have xs permissions. Logon failure : the user has not been granted the requested logon type at this computer
View 10 Replies View Relatedi have a laptop that i cant connect to the internet. this is so since i tried to create a peer to peer network (!) with another computer.. Any way i change my mind and after that reinstalled this laptop and so on. but i cant connect to the internet and when i log on the welcome screen is as if i have network, i mean it is not the default xp screen that display users etc.
View 6 Replies View RelatedI am trying to set up a home network to connect my laptop (with xp pro) to my desktop (with xp home) i am using a 3com office conect router as a hub. With the fire walls on each machine switched off I can see each of the machines from each other.I can share files on the laptop with the desktop, but when I try to access the desktop from the laptop I get the following message : xxxxxxx is not accessible. You might not have permission to use this network resource.
Login Failure : the user has not been granted the requested logon type at this computer.
I had the XP Security Center virus and, perhaps foolishly, reformatted - or more formally, "system reformat" for "returning the computer to factory conditions", as my friend who helped me with this process called it - my computer and reinstalled the operating system. But when I turned it on for the first time, there was, naturally, no internet connection. However, while I would normally proceed to set one up, there was, for some reason, no "View Available Wireless Networks" option when I right click on the little connection icon at the bottom right hand corner of the screen.
Am trying to set up a network with xp Home edition. I am curious about a couple of things. What is the difference in copying verses moving a file to the shared document folder? I would thing that by copying it, one is "duplicating" it and thereby using up resources. IF that is the case, when you access a file and make changes, are the changes saved to both places?
View 5 Replies View RelatedI recently changed my OS from Vista to XP Pro. Wireless worked fine on Vista and was brilliant. Now however, I am unable to see wireless networks in the list, without following the instructions on the Microsoft Knowledge Base website, which occurs every time my computer is restarted. This is annoying, because , if i dont have the net I cant see it and is also time consuming. Also my wireless connections are less stable, and I keep disconnecting.
View 1 Replies View RelatedI switched ISPs and the rep came to my home to help. He could not get a connection, so he installed some different lan cards until one worked. Since then, I installed a Wireless. Now, I have several drivers under networks in device manager that will not uninstall. Why? and how can I uninstall them like other devices there?
View 1 Replies View RelatedIf you have ever used a computer at a high school or college, then you might have seen that pesky software that prevents you from installing any programs or web content filters that prevent you from accessing instant chat sessions. Well here is a way to send instant messages to your friends over such networks as long as you have their ip or the name of the computer on the network. An easy way to find a computer's ip address is to type cmd in the run box on your start menu. This will start the command prompt. Type "ipconfig /all" with a space between "ipconfig and /all".That will list the computer's ip address along with other network specs. Now that you have the ip of that computer, you may send instant messages to it.Go to the run command in your start menu. Type cmd in the box which will open the command prompt just like above.Type: net send "ip address" message. If the computer you were trying to send a "Hello" message to had the ip address of 127.10.1.1,you would type "net send 127.10.1.1 Hello" Additionally, it is possible to use a wild card such as * in the ip address parameter. Example: net send * message
The above command will send your message to every computer on your subnet. This is great for system administrators to send out messages to all windows computers on the network notifying them that you are going to be taking down the server or something. However, if you are a student and feel like pulling a prank at school by sending some message across the school network, you will screw yourself. With today's zero tolerance policies in schools, you will be suspended possibly even expelled. Trust me; it's happening all over the USA.
I've just got a new laptop (Dell Inspiron 1545; Celeron Dual Core T3000; Dell Wireless 1397; Vista SP1 Home Basic with Media). Not liking Vista I decided to re-install my old Windows XP (Home Edition SP2). I had already set up the Wireless connection so I went online and got information on how to install this new OS whilst keeping the Vista one on the same HD. I set up a new partition, installed XP...and now can't access Vista or get any wireless. I've tried going into Network Connections, but I don't have a wireless connection icon, there's no choice for searching for local wireless connections & I'm completely flummoxed!
Anyway, I've tried to find out how to restore my wireless - I've re-installed the XP System Software (which was for an earlier Dell Inspiron model btw), tried installing the ISP Eurotools system software as well. I have tried to set up a new network connection etc, but obviously what I really need is for my laptop to detect the available wireless connections so I can re-join the wireless network we use throughout the house. I'm currently borrowing my dad's laptop, and am really hoping someone will know how I can fix this problem!Also, please note that I'm mostly a novice at computers, so I'd really appreciate step by step instructions on how to correct this.
Apple introduced a new social network in the latest version of iTunes called Ping that allows you to "follow your favorite artists and friends to discover the music they're talking about." If you are a music junkie that does not use Facebook you will love the service, for everyone else, almost all of the features already exist in the Facebook world. Although using Facebook may not be as elegant as using Ping, it is worth the few extra clicks to avoid another separate list of friends and likes.
View 9 Replies View RelatedAt 32 minutes in the windows XP home setup, in the "installing network" stage, my computer freezes. This has happened twice now
View 9 Replies View Relatedafter having good wireless connection,my desk top PC shows no wireless networks in range, although the wireless adaptor is shown as working,and connection to the router is ok from my laptop,how can I reset my desk top PC?,no,restore facillity available
View 1 Replies View Relatedhi everybody.every since i install sp2 on my pc ,kazaa lite has a problem with connection.it keeps trying connecting but it reemains on trying, even if i let for 2 hours
View 2 Replies View Related
