Set Outo Log On To Computer After Power Failure
May 18, 2010how to set auto log on to the computer after power failure?
View 1 Replies
ADVERTISEMENT
Computer Won't Boot Up After Power Failure
Apr 28, 2010I was on the computer this morning (plugged into a power bar) when all of a sudden the power went out in my neighbourhood. I was just on the desktop at the time I believe. I unplugged everything to prevent anything from surging to be safe, and I went out for the day.When I got home, the power was back on, and so I plugged the computer back in. However, as I plugged in the computer, it turned on by itself. Normally it does not do this when I plug it in after it was forced to shut down for a blackout. I immediately knew something was up.When it started to turn on, it immediately went to a blue screen of death.
It won't get past this screen. I've tried Safe Mode, Last Known Good Configuration, Normal Mode and it just keeps going back to this screen. I also noticed it doesn't make the normal noises when it's booting up. It doesn't make that 'click click' sound when I'm booting up (I believe that's a hard drive sound?). I do have access to the Windows Recovery Console (I think - it appears as an option - I don't know if it will work) but I don't know what to do. It sounds like it did something to the hard drive... when I boot up the computer normally it asks me to press F1 (because my CMOS battery is low)... now on that screen it says Serial ATA at the top. I don't know why that is, or if this has anything to do with the low CMOS battery before, but I can't get it to turn on at all at the moment. I don't understand why the power failure would do this (or what it did)... I've never not been able to boot up after a power failure. And surely there wasn't a surge since it wasn't plugged in when the power came back on.Did it kill the HD? Anything I can do to at least recover some files?
Computer Continuously Restarts After Power Failure
Apr 18, 2006can anyone help we had a power cut whilst my daughter was using her computer which runs xp.Now when we restart it it just continually restarts, I tried pressing f8 at the welcome screen and started in safemode this made no difference just went to the welcome screen and started again!
View 5 Replies View RelatedComputer Server Crashed / Power Failure
Dec 12, 2005I have a windows 2000 server crash. Assumed I had a power failure this weekend. The monitor also died. I replaced monitor. I hear the computer start up. Power to system, but no visuals.I do have a boot disk made on 3.5 floppy disk. What are some simple tips or things to do before I begin to restore the system.I have checked all power cords.Computer is AMD with raid system unsure of rest.
View 4 Replies View RelatedDisk Boot Failure: Computer Freezes / Held Power Button?
May 15, 2005well i have read a lot about this problem but im dont think i really found a solution so i thought i would make a new thread. Well i was just on my computer using p2p file sharing program. and then my computer froze. first the program itself and then the whole computer just froze. So i held down the power button until it turned off and then i turned it back on and then i received this error. Disk boot failure. insert system disk and press enter.
I have my stuff backed up, i used it as a secondary and i backed up the things i needed, so i dont really care that much if i need to format. The funny thing though is that it actually froze once on my brothers computer when i was transferring files and when i restarted it wouldnt boot up and when i took out my hard drive my brothers computer booted up perfectly and after it booted up perfectly i shutted it back down and then i attached my hard drive as a slave again and then it booted up.
Cant Boot Since Power Failure
Mar 22, 2010Ever since a power failure yesterday, my computer is not booting 100% of the way - it seems to stall at the end after loading desktop etc, can't see anything missing but I am unable to do anything. Nothing opens when clicked on. It works perfectly in Safe Mode with Networking.
I checked Device Manager and found 3 things highlighted:
HID Non-user input Data Filter
HID Non-user input Data Filter in HID section, and
WAN Miniport (IP) in Network Adaptors.
I do not have a wireless network, only a hard-wired one, so not sure what that is about.
Power Failure Then Will Not Open
Nov 21, 2007The computer shut down due to a power failure in the house. I started it up and the windows loads OK till I get to the page where it has the users names listed. I click on any user name. When I click on the name, it opens the page for a second and shuts down. I can see the wallpaper of each user and it closes immediately. It reads LOADING PERSONAL SETTINGS and then it reads LOGGING OFF, then it says SAVING YOUR SETTINGS.
View 10 Replies View RelatedPower Failure During Install
Dec 20, 2008During an installation of XP we experienced a power failure.The installation had been running for about 8 minutes when power went out.I After electricity was restored, I attempted to reinstall XP on the laptop however, now it will get to the Windows horizontal bar screen, and then a Windows Message comes up and says The system is not fully installed.
View 14 Replies View RelatedFreeze At Desktop After Power Failure
Jul 31, 2009My power went out for ten seconds yesterday, and when my desktop re-botted, it says drive D (hard drive) needs to confirm file consistency. It then performs a check and says all is well. The desktop then appears and the whole computer freezes. Anyone have any ideas on a fix? I have Windows XP with SP2.
View 2 Replies View RelatedStart Failure After Power Surge
Jun 17, 2005Or at least I think so, there was a whopper of a lightning storm and then Windows wouldn't start up the next morning. I've been trying to trouble shoot and am at a standstill close to the answer.
It will start in safe mode
I cannot restore it using the disc
I disabled several things in device manager and that didn't help
I tried the repair from disc as well, doesn't work
I finally reformatted - still doesn't work.
Power Failure - Port In Use By Another Program
Jun 15, 2005I was on-line several nigths ago, when the we suffered a power failure. Since then, everytime I try to use the modem(covenant 56k), I get a message indicating the port is in use by another program, and the dial-up attempt is aborted. I have re-installed the device-drivers for the modem and the port(COM1 -modem acutally is uses COM3), but still get the same results.
View 18 Replies View RelatedUnable To Start Up After Power Supply Failure
Aug 10, 2009I have a problem I have a new system installed Windows XP professional. Everything was ok till yesterday. I just have a few more things to install and I have the computer plugged into the 4 plug UPS so if the power goes down the computer has 5 minutes to shut down. Well the hydro went off yesterday for a few seconds and all of the other computers came back up but the new one. It was booting into Windows got to the Windows logo and the bar going across loading then after 10 minutes still sat there. I decided to re-boot to see what was wrong as I am a computer tech. Nothing so I went into safe mode that was fine got out of there same thing logo looks like it was starting nothing. I did put in the Windows XP disk thinking to just do a repair still the same thing. I get the Windows screen like it is loading nothing. Go back to safe mode and here is what it says and there is no disk at all in the drive. Can not run setup from Safe Mode rebooting computer.
View 14 Replies View RelatedBoot Failure: Possible Power Surge Or Hardware Problems?
Jul 19, 2005My PC starts up fine, BIOS all OK. Then I get the message about Windows failing to load because of possible power surge or hardware problems or something, and a choice between loading Windows normally, loading the last known working setup, or the three variations on loading safe mode.
Disk Boot Failure: Started Pc After Power Outrage?
Jul 1, 2010I had a power outage last night and when I turned the computer back on this morning, it says that error. "Disk Boot Failure - Insert system disk and press enter" I do not have a working CD drive in the computer so I hope that doesn't have anything to do with it.
View 4 Replies View RelatedLost Admin User Acct Due To Power Failure
Mar 21, 2009loss of power to the house has resulted in loosing all administrative accounts & profiles. Cant log into anything on the admin section. Only 1 acount acces and has no admin privlages. Have been told it may possibly be a damaged user profile. Need help on how to repair this so i can log on . Thanks PS its a dell optiplex gx260 :with pent 4 & windows xp prof., version 2002, service pack 3
View 5 Replies View RelatedPower Failure - Copying Files - Full Version
May 17, 2010The power failed during the "copying files" stage. Now when I try to reinstall it it says that "Setup cannot find a previous version of Windows installled on your computer." Then it wants me to insert a full version of xp in the cd-rom drive.
After I did this, it says that it cannot read the cd, or that its invalid, I tried it on another cd (same os and everything except its service pack 1) and then it says the same thing.
Does Not Start Up Properly - Power Failure Start Windows Normally
Aug 18, 2008We are trying to start a laptop but windows is not starting up properly. As the boot begins, it takes you to a screen that says, :"if a previous start up attempt was inturrupted due to a power failure, then choose Start Windows Normally". We follow the directions, takes us the Window XP screen trying to boot it up and then takes us to the Gateway screen and then back to the screen where it asks the same question again.The cycles continues without any other options.
View 6 Replies View RelatedDesktop Manager For Power Users Must Have Power Toys
Aug 12, 2002Desktop Manager allows you to switch between multiple desktops creating more elbow room for those who like to stay organized while pushing the max thread limit.1. First grab XP PowerToys from microsoft.com Once installed right click then check: task bar > toolbars > Desktop ManagerYou may now view up to four new desktops. I prefer not to have "Shared Desktops" on as it reminds me more of linux (and is cleaner).Now you may hide the buttons etc. and use Windows key + 1-4 to switch between desktops and Windows key + v to preview.
View 9 Replies View RelatedPower Up Immediately Once The Computer Plugs In?
Jan 12, 2009I am trying to get my PC to automatically boot up once it recieves a power source. My reason is that I am using a small pc as a server to a salon server and i work elsewhere off site so if the power were to go out the salon staff wouldn't know how to get the machine back up.
View 9 Replies View RelatedPower Light Comes - Computer Will Not Boot Up.
Oct 21, 2006She's unplugged it for five minutes and tried again and also unplugged everything from the back of the box and tried again, but still nothing.
The power light at comes on when she hits the on button but apart from that nothing happens
Computer Slow To Power Up With Home SP2
Aug 24, 2010I have a 4 year old Dell Dimension 3100 desktop PC which when I turn it on first thing in the morning everything seems to be slow coming on. I have Avast AV, SuperAntispyware and Malwarebytes which I scan with daily. This morning it took about an hour before I could use the computer, the SuperAntispyware banner which comes up every morning came up this morning and just froze on my screen, this stupid box which has something to do with my wireless connection kept popping up asking me to enter my username and password, I kept hitting cancel to make it go away, it wouldn't go away.
View 7 Replies View RelatedComputer Won't Start - New Power Supply Did Not Help
Oct 12, 2006computer for a few days you would press the start button on the tower and it wouldn't start right away but then after a few sec would come on. Yester day I tried it twice I pressed the start button on the tower and you could hear the power supply try to start but would die and the computer would not come on. so about the thired time press the button and nothing, would even try to start. I figured it was the power supply. I put a tester on the power supplyh and it said it was bad, so I bought a brand new one put it in and it still would n't do anything just dead.I tested the new one and my tester sasid it was bad, I changed it for another one and the store I bought the 1st one from tested the 1st one and there tester showed it was good, so my tester must not be working.
View 5 Replies View RelatedDisk Boot Failure On HP Computer
Feb 27, 2008I've had this computer for a year and a half, and this is the third time it's done this. I want to know if it's something I can fix on my own - I dont' know much about computers at all. To get into setup, I have to press F1 from the start up menu. If I don't do that, it takes me to a black screen where it says, Disk Boot Failure, please insert system disk and press enter. I have taken this computer to a repair shop, where I have been charged 200 dollars each time I get this message. Please advise me on what I should do, or if I'm doing something wrong? I have windows XP and it has only one DVD/CD drive, no floppy or anything like that. It started doing it this time when it froze and then I pressed cntrl-alt-delete and got the above error message.
View 5 Replies View RelatedComputer Running - Failure To Initialize
Jun 3, 2007i keep my computer running all the time. At irregular intervals approximately every 2-3 days the computer will partially freeze. I say partially, because programs already loaded continue to work, but any attempt to run any new application produces the message "failed to initialize". So for example I can still use or save an Excel worksheet that was already open but if Excel were not open and I try to open it I would get the "failed to initialize" message. Outwardly the computer appears fine - it is only when I go to use it or realise I haven't had an email in a long while that I suspect it has "gone again". Re-starting the computer without pulling the plug takes 30 minutes, but does eventually work after several non-responsive programs are terminated (not the same ones each time). All very frustrating....
View 14 Replies View RelatedPower Schemes Are Missing From Power Options
Nov 19, 2004I'm running WinXP pro and have lost all the reguler power schemes from the power options propreties window. Also I'm unable to Save a new scheme.I beleive the schemes where deleted from the power properties window by right clicking and selecting delete. They used to be there anyway Unknown is listed above Turn off monitor-Turn off hard disks-System standby-System hibernates and everything is greyed out. They are still listed in the registry but with no value set.How do I go about getting the schemes back?
View 5 Replies View RelatedComputer Wont Turn On - Bad Power Supply?
Jan 10, 2006I recently put together a new computer. I have used it for about a week now, today I got home and my computer won't turn on. I am guessing bad power supply but wanted to check if it might be something else.
The mother board that I have is a Biostar K8NHA GRAND Socket 754 ATX Motherboard, DDR400, 1394, SATA RAID, 6ch Audio & GB LAN
Power User Privileges - Computer Management
Jan 11, 2007I am trying to uninstall a program and it says I need to have administrator
or power user privileges to uninstall the program. When I set my computer up
I set it up so it assumes I am logging on and I am the administrator. How do
I get the privilege? It says I am an administrator in computer management,
local users and groups.
Unable To Power Off The Computer / Getting Black Screen?
Sep 27, 2006After a hard disk crash I replaced the disk and did a clean install of Windows XP. Now when I do a Shut DOwn, the operating system will shut down and I get a black screen but the actual machine will no longer power off.I have not changed anything in the bios but cannot find out what the problem is. Can anyone help?
View 2 Replies View RelatedUnplug Computer From Power Supply To Shutdown
Feb 23, 2005I have just upgraded one of my old Windows 98SE computers to XP Pro. The installation went well.But, for some reason now after I shutdown the computer in order for me to turn it back on I have to unplug it from the power supply and then plug it back in. Before i upgraded the computer I was already having a shutdown problem with Windows 98SE.Every time that I would shutdown, it would restart on its own.I tried to trouble shoot the problem.I even downloaded a patch from the Microsoft Website but it still didn't work.So i figured if i upgraded it to XP it would solve the problem, but I ended up with a different problem.
View 2 Replies View RelatedBoot Failure: Computer Cycles Through Startup?
Apr 29, 2010I have recently had a major system failure, specifically my Windows XP will no longer fully boot. When I power on my computer, it gets to the "windows had
a problem starting up" page, where it gives options for starting in safe mode, normal mode, etc. However, no matter which option I choose, the computer cycles through startup and comes back to this same page. I have tried hitting F8 and getting to the advanced options, but I get the same result. Nothing I try works. I suspect there are corrupted sectors in the core system somewhere.
Disk Boot Failure While Starting The Computer?
Jun 17, 2010When I start my non-brand PC with an MSI mobo I receive the following message:disk boot failure insert system disk and press enterAt first I thought it was the SATA hard drive but when hooked up to another machine I can see all the files. When I went into the Phoenix/Award Bios all the drives are IDE drives. Not an SATA drive option anywhere. The computer was working great for a number of years. I hooked a brand new SATA drive and the BIOS does not recognize the drive.