The power failed during the "copying files" stage. Now when I try to reinstall it it says that "Setup cannot find a previous version of Windows installled on your computer." Then it wants me to insert a full version of xp in the cd-rom drive.
After I did this, it says that it cannot read the cd, or that its invalid, I tried it on another cd (same os and everything except its service pack 1) and then it says the same thing.
I have a Dell 2350 Pentium4 1.8 gig Running WinXP Servicepack 1. When trying to install service pack2 thru automatic updates, the installation seems to be going fine. Then, while copying new files to the computer (after backing up and setting a restore point) I get a message that says "Generic host proces for Win32 Services encountered a problem and needs to close". The file copying continues in the backround. The standard message asks if I want to send the error to Microsoft. I send it and the file copying continues. After five more minutes copying files an error message pops up:"Access is denied". The system requires a click on "OK" and the old system is restored. I have tried to install several times with the same results.
View 5 Replies View RelatedI have a computer that came with OEM Windows Me and I want to upgrade to Windows
XP Pro. Is it possible to acquire a retail upgrade version of Windows XP for that
machine?
I have acquired a computer with an oem copy of xp installed I have a full version cd of xp pro recently acquired can I do a reformat and then install the full version with no complications. I dont know much about oem's.
View 14 Replies View RelatedThis forum has been incredibly helpful, and now I must ask another "ignorant" question to maintain my computer loving insanity. I recently acquired a used laptop running XP Home. I use Pro for work, so I thought it wise to install Pro over the top of the the former owners' OS and thereby effectively delete his old files etc. Well, what I found was that Windows simply imported the old OS info right into the new install, leaving folders, files and programs I didn't want on the hard drive. So my question for you guys and gals is this. How do I destroy everything on my hard drive, then make the laptop (without floppy drive available), accept the reloading of my XP Pro CD? It is a full OEM version by the way. If I can format the HD, and have BIOS boot from CD-ROM, will I have a "fresh" CD-only install at that point, or will there still be little goblins of information running around in my system
View 14 Replies View RelatedEver since a power failure yesterday, my computer is not booting 100% of the way - it seems to stall at the end after loading desktop etc, can't see anything missing but I am unable to do anything. Nothing opens when clicked on. It works perfectly in Safe Mode with Networking.
I checked Device Manager and found 3 things highlighted:
HID Non-user input Data Filter
HID Non-user input Data Filter in HID section, and
WAN Miniport (IP) in Network Adaptors.
I do not have a wireless network, only a hard-wired one, so not sure what that is about.
The computer shut down due to a power failure in the house. I started it up and the windows loads OK till I get to the page where it has the users names listed. I click on any user name. When I click on the name, it opens the page for a second and shuts down. I can see the wallpaper of each user and it closes immediately. It reads LOADING PERSONAL SETTINGS and then it reads LOGGING OFF, then it says SAVING YOUR SETTINGS.
View 10 Replies View RelatedDuring an installation of XP we experienced a power failure.The installation had been running for about 8 minutes when power went out.I After electricity was restored, I attempted to reinstall XP on the laptop however, now it will get to the Windows horizontal bar screen, and then a Windows Message comes up and says The system is not fully installed.
View 14 Replies View Relatedhow to set auto log on to the computer after power failure?
View 1 Replies View RelatedI was on the computer this morning (plugged into a power bar) when all of a sudden the power went out in my neighbourhood. I was just on the desktop at the time I believe. I unplugged everything to prevent anything from surging to be safe, and I went out for the day.When I got home, the power was back on, and so I plugged the computer back in. However, as I plugged in the computer, it turned on by itself. Normally it does not do this when I plug it in after it was forced to shut down for a blackout. I immediately knew something was up.When it started to turn on, it immediately went to a blue screen of death.
It won't get past this screen. I've tried Safe Mode, Last Known Good Configuration, Normal Mode and it just keeps going back to this screen. I also noticed it doesn't make the normal noises when it's booting up. It doesn't make that 'click click' sound when I'm booting up (I believe that's a hard drive sound?). I do have access to the Windows Recovery Console (I think - it appears as an option - I don't know if it will work) but I don't know what to do. It sounds like it did something to the hard drive... when I boot up the computer normally it asks me to press F1 (because my CMOS battery is low)... now on that screen it says Serial ATA at the top. I don't know why that is, or if this has anything to do with the low CMOS battery before, but I can't get it to turn on at all at the moment. I don't understand why the power failure would do this (or what it did)... I've never not been able to boot up after a power failure. And surely there wasn't a surge since it wasn't plugged in when the power came back on.Did it kill the HD? Anything I can do to at least recover some files?
My power went out for ten seconds yesterday, and when my desktop re-botted, it says drive D (hard drive) needs to confirm file consistency. It then performs a check and says all is well. The desktop then appears and the whole computer freezes. Anyone have any ideas on a fix? I have Windows XP with SP2.
View 2 Replies View RelatedOr at least I think so, there was a whopper of a lightning storm and then Windows wouldn't start up the next morning. I've been trying to trouble shoot and am at a standstill close to the answer.
It will start in safe mode
I cannot restore it using the disc
I disabled several things in device manager and that didn't help
I tried the repair from disc as well, doesn't work
I finally reformatted - still doesn't work.
I was on-line several nigths ago, when the we suffered a power failure. Since then, everytime I try to use the modem(covenant 56k), I get a message indicating the port is in use by another program, and the dial-up attempt is aborted. I have re-installed the device-drivers for the modem and the port(COM1 -modem acutally is uses COM3), but still get the same results.
View 18 Replies View Relatedcan anyone help we had a power cut whilst my daughter was using her computer which runs xp.Now when we restart it it just continually restarts, I tried pressing f8 at the welcome screen and started in safemode this made no difference just went to the welcome screen and started again!
View 5 Replies View RelatedI have a windows 2000 server crash. Assumed I had a power failure this weekend. The monitor also died. I replaced monitor. I hear the computer start up. Power to system, but no visuals.I do have a boot disk made on 3.5 floppy disk. What are some simple tips or things to do before I begin to restore the system.I have checked all power cords.Computer is AMD with raid system unsure of rest.
View 4 Replies View RelatedI have a problem I have a new system installed Windows XP professional. Everything was ok till yesterday. I just have a few more things to install and I have the computer plugged into the 4 plug UPS so if the power goes down the computer has 5 minutes to shut down. Well the hydro went off yesterday for a few seconds and all of the other computers came back up but the new one. It was booting into Windows got to the Windows logo and the bar going across loading then after 10 minutes still sat there. I decided to re-boot to see what was wrong as I am a computer tech. Nothing so I went into safe mode that was fine got out of there same thing logo looks like it was starting nothing. I did put in the Windows XP disk thinking to just do a repair still the same thing. I get the Windows screen like it is loading nothing. Go back to safe mode and here is what it says and there is no disk at all in the drive. Can not run setup from Safe Mode rebooting computer.
View 14 Replies View RelatedMy PC starts up fine, BIOS all OK. Then I get the message about Windows failing to load because of possible power surge or hardware problems or something, and a choice between loading Windows normally, loading the last known working setup, or the three variations on loading safe mode.
I had a power outage last night and when I turned the computer back on this morning, it says that error. "Disk Boot Failure - Insert system disk and press enter" I do not have a working CD drive in the computer so I hope that doesn't have anything to do with it.
View 4 Replies View Relatedloss of power to the house has resulted in loosing all administrative accounts & profiles. Cant log into anything on the admin section. Only 1 acount acces and has no admin privlages. Have been told it may possibly be a damaged user profile. Need help on how to repair this so i can log on . Thanks PS its a dell optiplex gx260 :with pent 4 & windows xp prof., version 2002, service pack 3
View 5 Replies View RelatedMy system totally crashed. I reformatted the drive and reinstall XP. Well, everything seems to be going along just fine until I get to 70% finished with copying installation files and I get message after message saying that the files cannot be copied.
View 3 Replies View Relatedwell i have read a lot about this problem but im dont think i really found a solution so i thought i would make a new thread. Well i was just on my computer using p2p file sharing program. and then my computer froze. first the program itself and then the whole computer just froze. So i held down the power button until it turned off and then i turned it back on and then i received this error. Disk boot failure. insert system disk and press enter.
I have my stuff backed up, i used it as a secondary and i backed up the things i needed, so i dont really care that much if i need to format. The funny thing though is that it actually froze once on my brothers computer when i was transferring files and when i restarted it wouldnt boot up and when i took out my hard drive my brothers computer booted up perfectly and after it booted up perfectly i shutted it back down and then i attached my hard drive as a slave again and then it booted up.
I have a little problem maybe someone has a answer for me. I have a WD 250 GB HDD labeled as the D Drive. Well this morning I cannot get to it from windows at all a error message pops up saying MBR is corrupted or unreadable and that is it, the drive has worked flawlessly until the past week. Whenever I copied a file to it then tried to view or play it it wouldn't let me into the folder where i placed it saying a similiar message the folder has become corrupted and locked me out as to say. Today the system doesn't even recognize the drive at all.
View 2 Replies View RelatedI suspect we did not allow the write operation to finish but why this should affect boot up is beyond me.WE were copying a Folder containing word docs and gif files using right click/Send to/CD Drive. The files were copied ready for burning in the usual way and the burned to the CD.Being anxious to check the copy my partner clicked on the ready to burn icon instead of exiting and looking at the drive and the system froze. the only way was to power down and now it will not boot.It hangs on the windows logo screen (with the blue horizontal scrolling bar) and eventually the screen goes blank.I booted to safe mode and the screen hung at the end of the files loading, at least I thought it hung but in fact i had not waited long enough because on the second attempt it booted to safe mode after 4 minutes.Device manager shows no problems so rebooted as normal. Got the usual windows has encountered a problem screen and selected safe mode again. This time it took 25 minutes to boot.
View 14 Replies View RelatedI'm trying to install Win XP pro onto a brand new hard drive. I'm able to fully format it to NTFS without any problem. Once the format is complete, it then begins to copy over all the Windows system files from the disk to drive. It gets between 70-80% complete when it starts to encounter errors copying files over.
I've used two seperate rom drives as well as 3 different installation disks and I get the same error at the same point in time after every attempt.
I am trying to copy a file (4gig) from another computer. When I copy with a wired adapter it takes about 10 minutes. When I copy with the wireless adapter it takes about 50 minutes. I am using Windows XP Pro.
View 5 Replies View RelatedI have a computer that I need to take all of my existing files off of so that I can erase the HDD. I also have a 150gb external USB HDD. What is the fastest way to transfer all of my files on to my external HDD, and make them so that they are viewable by my other computers. I am running all Dell computers with Windows XP Professional on them.
View 1 Replies View RelatedMy old XP crashed 2 days ago (All thx to WIndows Auto Update). I tried to use the Windows XP original CD but after repairing, it just stuck at the loading bar with an error message saying that "System32drivers tfs.sys is missing or corrupted".Using the recovery console, I copied the ntfs.sys from the CD to replace the new one, but it didn't solve the problem.
Tired & Frustrated, I decided to install a new one on D:. Now my new XP worked great, but I kinda need all the program that I installed on the old XP back. They're all there on my hard drive with my old XP system. So I guess if there's someway for me to copy all the registration files from my old XP system to my new one, I can run all my programs. I'm really appreciate if anyone can help me with this.
I am trying to install Windows XP Prof. and it keeps failing to copy over files right after a format. It never is the same files, it has been about 15-20 different files on about 5-6 tries of installation.It asks you if you want to retry and sometimes that works, sometimes it doesn't, sometimes you have to skip. It says it could be the windows disk, but the windows disk works fine in my test machine and I can install windows perfectly over there.
View 3 Replies View RelatedIm trying to copy a file from one folder to another but the batch file is not working, it says incorrect syntax. the command line im using is: COPY C:TEST *.* C:BACKDIR Does anyone know why this isnt working?
View 2 Replies View RelatedI'm trying to write a batch file that will copy files from a folder on the desktop to various files on the C drive. From what I understand it should be like this: copy c:documents and settings\%userprofile%desktopinstallfilename.txt c:windowsfilename.txt
with %userprofile% in place of the actual user profile name because it will be different each time I run this batch file.This, however, is not working.
desktop computer crashed (motherboard) and I purchased her a new laptop. I am trying to copy her files from her "My Documents" directory - I have converted the old HD into an external drive - but it is telling me that there is nothing there. She was an Administrator on the old PC and she is an Administrator on the new laptop. What am I doing wrong? What have I not done? I don't want to lose two years of info. Even the backups will not work.
View 6 Replies View Related