I want to use file recovery software to recover files from a HDD that was accidentally formatted. I am told not to save anything I can recover to the same drive I am recovering from. The computer only has a CD RW drive and a floppy drive. Can anybody tell me exactly how I can save the files the software finds to either the CD drive or the floppy drive? I downloaded three file recovery programs (1). pci_file recovery (2.) testdisk 6.8 (3.) free undelete. All have similar interface but they don't say how to save to floppy or CD. They just say do not save to same drive from which you recover. The computer is using windows xp and it has about 25 Gigs of free HDD space.
I somehow accidentally formatted my "E" Drive, I know all my MP3s were in there and some other stuff I don't know yet.is there any way I can recover them?
info on recovering lost/ deleted files? I have accidentaly deleted some documents from my computer while performing a backup. Actually I deleted them from the backup before I reintroduced them to my computer. They were backed up on there own slave drive.
I have two laptop computers. The primary machine is 8 months old and is of fairly advanced spec. It has a DVD/CD R/W but no floppy drive. The secondary machine, which was replaced by the primary some 8 months ago, is of much lesser spec but may have either a CD R/W or a Floppy Disk drive inserted into the media bay, but not both at the same time. Both machines are running Windows XP Professional SP2 with all updates and patches installed.
I have just finished completing the installation of a new computer system. Along with a complete overhaul (see signature for specs) I have installed a new SATA hard disk with Windows XP MCE 2005 to boot , and the existing hard disk (which has a non bootable version of windows on it) is plugged in as "spare storage". However I have some valuable pictures on the old hard disk which have been ecrypted for security and under the new installation I cannot access these files at all. I cannot even copy the files to the SATA drive as it claims Access is denied. Going into the properties of the files does nothing as again...access is denied. I would have gone into the existing windows installation had it not screwed up and decrypted the files before copying them over but unfortunatey I didn't know my motherboard and Windows installation was going to fail
I just recently deleted a folder that i wasn't supposed to delete inside my EXTERNAL HARD DRIVE. Inside that folder were 2 other very important sub folders. It was over 8 gigs so when i deleted it, i unfortunately commited the same mistake of pressing the "yes" button again when it asked the files to bypass the recycling bin being permanently deleted from the computer. In fact it happened so fast it seemed like it vaporized. It was hard to believe that over 8 gigs of files were eliminated that fast, whereas usually any big file i would delete would normally take a while for the computer to process
I have an XP and I deleted a file (.doc) and I wish to recover it; from what I understand when a file is deleted it's not "wiped" off the HD, just the path to it is gone. How hard is it to recover the file?
The files were deleted (and Norton Protected recycle bin emptied) from both the C: (boot drive/OS) and D: drives and when I tried to run System Restore, it gave me an error message, so I assume some of the system files may have been deleted as well. I am not the primary user of this computer and while the computer was functioning after I discovered this, I made the mistake of re-booting the computer and now get a ''NTLDR is missing - press Ctrl + Alt + Delete'' at boot. I have the Sony System recovery discs (no Windows XP disc that I can find) but I don't want to lose any more data and I would still like to try and recover the previously deleted files.
I get a phone call from someone who had the missing NTLDR message. THey said they were on the phone with microsoft for hours. The person outsourced told them to do another install of Windows to get in so they can back up their files. They tell him to install to Windows1 instead of Windows. I guess the smart outsourced agent thought this wouldn't delete any files since my friend told him he has some very important documents on this hard drive. So he installs another Windows and guess what, his documents and settings get overwritten. Looks like these guys really know what they're talking about since any Microsoft person should know this happens no matter where you install Windows
I just recently deleted a folder that i wasn't supposed to delete inside my EXTERNAL HARD DRIVE. Inside that folder were 2 other very important sub folders. It was over 8 gigs so when i deleted it, i fortunately commited the same mistake of pressing the "yes" button again when it asked the files to bypass the recycling bin being permanently deleted from the computer. In fact it happened so fast it seemed like it vaporized. It was hard to believe that over 8 gigs of files were eliminated that fast, whereas usually any big file i would delete would normally take a while for the computer to process. I seriously doubt the worst here, and i have tried about 4 data recovery programs that were only able to detect the very main folder that was deleted but not the more important 2 subfolders inside of it containing the big chunk of the data. I've even been able to detect files that were deleted months ago through these programs, but not the important 8 gigabyte chunk i just deleted an hour ago. By the way i tried scanning both the C rive(main) and the external hard drive and browsing through the :/recycle folders, but to no avail
Does anyone know how i can manually recover my files. I would prefer to do it myself cause its free or if you can point me to some good freeware that will help me recover my files.
Did something really stupid the other day. Was doing a Windows install and I mistook a drive for a different drive.In short, I deleted the partition, recreated the partition, but I haven't reformatted yet. The partition was the same size before and after so that shouldn't be a problem. the files should still be there but I don't know how to get at them. I've already tried Recuva, UndeletePlus, Restoration, and a Knoppix boot disk but none of these were able to do anything because of the lack of a file system/boot sector.
my cousin was using th comp the other day an she threw away a bunch of stuff on here. it happened before so i check the stuff ppl throw away on here now. so i opened it up an check ed what was in there an it was just nothing. so she clicked empty bin an i glanced real quick an saw that rundll with the windows logo as icon but it was to late. is there a way of recovering sumthing after emptying the recycle bin?
I've searched the internet for a simple way to do this, but it seems it all revolves around paying for the privilege, hence I hope you can help. I introduced a new hard drive into my machine which was going to be the primary drive, along with a secondary hard drive which contained all my MP3, MPEGs, JPEGs, etc. And before I go further, the second HDD hadn't been backed up for new a year. As I type this, I now understand the importance and value behind ackup!! Anyway, I inserted my Windows XP operating disk, and started the machine. It went through the usual start up procedure, asked me to format and partition the new hard drive BUT, for some unknown reason, when I was prompted to choose which HDD
This probably isn't really a Windows question but I can't find a better place to put it.I'm trying to recover files from a Dell laptop that won't boot into Windows. I think the partition is corrupt but I don't know enough to say for sure. When I try to boot normally, it says "NTLDR is missing".When I use a Windows installation disk (as if I were going to install or repair Windows), and I get to the part where it asks me to choose a partition, it shows the partition as "C: Unknown" where the other partitions (from Dell) are FAT or FAT32. When I run Ubuntu off of a LiveCD, I can see a "52.1 GB Volume: disk", but when I try to open that it tells me "The folder contents could not be displayed". The DellRestore and DellUtility partitions can be browsed normally.
I had two OS on two partitions, one WIN98 (c:/ drive) and the other winXP pro (d:/).I loaded win98 and then rebooted to dos, formatted c (need the disk space).I reboot and it tries to load win98 and not winxp (which is located on d:/).How do i change the boot process so it lods winxp pro from d ? BIOS?
I just did a restore on a compaq laptop that is about 5 years old. It was having problems connecting to internet so I started the restore a few years ago. When I started the restore it was just shutting off on me. I gave up and bought a new computer. Well just a few days ago a good friend of mine passed away, and his family wants pictures that I had on this computer. Went to start it up and see if it would turn on. It did and continued with the restore, It finished the restore, but now there is none of my data left. I would love to get these pictures back
The way my recovery partition works on my netbook is when it was first used (I didnt not use it first) is it creates an image of the system when all the system has been setup then when ever I have to use the recovery it used that image to just overwirte and replace everything.I have access to the partition where the Recovery is stored and I have my Recovery Disk but as its a netbook I have no Drive, I can copy the disk files onto my Pen drive (if my pen drive is big enough)
I want to know if there is anyway I can change it so I can use the recovery and do it from scratch like when it was first turned on (first use) because there are setting there and other items that I want to change. If I could do it by editing the files in the partition that would be easier but I can try and use the disk if needs be?
I have a Compaq Presage SR1800NX and it has a virus on it, I can't tell which one I did multiple boot only disk virus scanners, but I don't think they caught it. I can't boot to windows anymore and I don't have the recovery disks, I can't get into safemode, but I can get into the recovery console. What are my options?
after forcing my laptop off, i restarted it only to find that the registry had become corrupted blue screen message: stop:0000218 {registry file failure}i searched the forums and found that i need to restart the computer using the windows xp (home) start up cd to access the recovery console.the problem is that the laptop came with an OEM installed operating system so not only do i NOT have a start up disk,but i also found a caution that the recovery console proceedure will not work with an OEM installed system.
This follows on from my previous thread "Error messages when trying to log in to internet"I dug out the instructions for my 6 year old PC and discovered for the first time that there was a recovery option by pressing F10 during boot up. I really need to repair or reinstall windows as the PC is so messed up but there are two options.Default option: Recovers factory- shipped applications, drivers, and the operating system without affecting any data files that you may have created since purchasing this PC.
A year ago, I was having ME/XP opr sys problems and reformatted my HD. Being cute, I formatted into a 29 G section and an 8 G HD and put ME upgraded to XP in the 8 and all 'personal' and controllable programs into the 29G section "C". All photos and video are in the 29G section. The 29G section has 23G free. The 8G "D" has filled up (careless on loading software, etc). I have now deleted programs, looked for large files, emptied trash, etc to try to get back to Opr Sys files only (as best I can determine). No matter what I do the free space seems to shrink. Now 7.97 G. total, 472 M free. I have XP and 97? office. Except for deleted programs (I have the discs), everything seems to work, although slow.
I have a 320G hard drive but Xp's just showing 127G after I clean installed due to system crash.Does any one know how I can go about recovering the remaining space?
bought a new portable HDD -Western Digital Passport 320GB, and I formatted it to NTFS on my laptop on XP. My main gaming PC has Windows 7 x64 on it and when I got home from my holiday I transferred my files to it and put BitLocker on it.Once I had done this I plugged it back into my laptop with XP on it, and it picks it up as Local Disk (F: ) and says it needs to be formatted. Why would this be? I thought okay, so I took off BitLocker off of it on Windows 7, and plugged it back in, and it was still saying it. What is the problem here? I right clicked it and it said the FileSystem is RAW, which didn't make sense as I formatted it to NTFS on the same computer.
I have a hard disk (non-booting) that was formatted by windows 98. I put a new drive in the system and put xp pro on it. The drives show up in device manager, and on my computer, but when I attempt to access the drive, it says "unformatted drive, do you want to format". I hit no,because I don't want to lose the info on it.
I formatted a computer with NTFS (not quick) which reached 100% which had a hal.dll error on it when trying to boot. All seemed well and it let me install a new copy of XP on it.The only thing is now when the computer is turned on it asks which install of windows I want to boot from but I already formatted it so can't understand why the old one is showing up at all - the computer is running fine now as long as when it's booting I don't pick the original install of XP which has the hal.dll error on it.
I had to do a reinstall of XP on a brand new HD I just bought and I can't remember how to get XP to utilize my seperate HD I use for storage. It keeps asking me to format it. I have all my data on it so I definatley can't do that. I did something a year ago to get this to work, but I can't remember what I did. I installed XP service pack 2. Anyone know what to do? I remember I did something in disk managment. The drive I can't get to work is used for my backups. It is formatted and partitioned using XP and the same NTFS system as the new HD with XP on it. Even my bios detects the 320gb HD at 136gb max capacity. So its not showing that the drive is a 320gb HD. I am pretty sure my bios specified that it was 320 gigs before.
When I go into disk managment the drive I am having problems says it has 128gb as a primary partition(in blue), but then in the black highlighted box to the right says 170 gb unallocated. Shouldn't all the drive be in blue as being partitioned like it was before I did an install?
Ok here's the story, I bought Windows Vista, hated it with a passion, so I went to reinstall XP. Everything's going fine, then it gets to the stage where it wants to pick a hard drive to install it on. I have a 120GB (split into 40GB/80GB partition), and 2 250GB HDDs. So it tells me I have a previous version of Windows installed. I say format that (I was on the phone to a friend while doing this, so I wasn't paying much attention, but I've done this hundreds of times before), then "Storage 2 (E Formatting"...I pulled out the power supply in haste, but it was to late, logged into Windows, and gone 250GB of files that would take years to recover, if they are even recoverable... and I just realised all my web development work was on the drive as well... I have back ups but not everything is backed up...I only did a quick format, so I don't know if that makes it easier to recover but I need a good, reliable, and possibly free program to get my stuff back.
A co-worker cannot locate a folder containing templates for form letters. He has searched for the files, checked other locations and recycle bin. He thinks someone may have moved or deleted it. How can we find/recover the files
