I have just finished completing the installation of a new computer system. Along with a complete overhaul (see signature for specs) I have installed a new SATA hard disk with Windows XP MCE 2005 to boot , and the existing hard disk (which has a non bootable version of windows on it) is plugged in as "spare storage". However I have some valuable pictures on the old hard disk which have been ecrypted for security and under the new installation I cannot access these files at all. I cannot even copy the files to the SATA drive as it claims Access is denied. Going into the properties of the files does nothing as again...access is denied. I would have gone into the existing windows installation had it not screwed up and decrypted the files before copying them over but unfortunatey I didn't know my motherboard and Windows installation was going to fail
I have two laptop computers. The primary machine is 8 months old and is of fairly advanced spec. It has a DVD/CD R/W but no floppy drive. The secondary machine, which was replaced by the primary some 8 months ago, is of much lesser spec but may have either a CD R/W or a Floppy Disk drive inserted into the media bay, but not both at the same time. Both machines are running Windows XP Professional SP2 with all updates and patches installed.
Did something really stupid the other day. Was doing a Windows install and I mistook a drive for a different drive.In short, I deleted the partition, recreated the partition, but I haven't reformatted yet. The partition was the same size before and after so that shouldn't be a problem. the files should still be there but I don't know how to get at them. I've already tried Recuva, UndeletePlus, Restoration, and a Knoppix boot disk but none of these were able to do anything because of the lack of a file system/boot sector.
I am having a problem with my 400GB HDD not displaying correctly - it displays as 127GB - in a new install of Windows XP on a seperate drive. My original setup was as follows:400GB SATA HDD with Windows XP as the Operating System plus Data - Single Partition - NTFS. 300GB SATA HDD with purely data - Single Partition - NTFS.I bought a new HDD today (SATA 320GB) and installed it in the PC. The original XP install saw it was installed and offered formatting options from Control Panel -> Administrative Tools -> Computer Management - no formatting options were taken.I then installed Windows XP (non-SP2 install, SP2 has been installed afterwards along with Video Card and Motherboard drivers) to the new HDD without removing the old drives first.
I moved some EFS encrypted files to my new PC, but can't open them there. I've been using NTbackup, so the encryption is preserved, and all I get is "access denied" when trying to open them.What is the easiest way of decrypting them? I tried exporting the user certificate from the old pc using CIPHER /X, importing it to the new pc, but that didn't help. So how do I go about to decrypt these files? As it is nearly 50gigs of data and a slow network, I'd rather not decrypt the files and transfer them again.
I want to set a password for the Guest account on my XP Home Edition computer but one of the instructions state not to do so if the Guest account has any encrypted files. However, I don't know how to find that out out. Can someone tell me how to do so?
I have user who created a few ecrypted MS Office docs on the home drive. Instead of using the encrypted folder, the user ecrypted the individual files. The user is unable to do anything with those encrypted files. Copy, move, unencrypte none of them works. The user is running Win XP SP2 and the file server is WS2003 R2 SP1.
I have 2000 some encrypted pictures on hard drive x.(windows xp)Hard drive x is now a slave drive on another computer. I have complete access to hard drive x, but cannot migrate my old profile/keys over to the new computer to decrypt the files.Is there any way to do this short of going back in time and not doing it to begin with?hard drive x gives the stop error when i try to boot with it and the new computer is running windows xp also
i get "access denied" when i try to open any encrypted files created before the restart and incomplete system restore.xp has created or recreated my admin account with the same name/password (new valid from date). is this why i can't access the files now?under encrypted file/properties/advanced/details/add option xp reports "CA Root certificate not trusted, install in Trusted Root Certification Authorities". is this a related problem?
info on recovering lost/ deleted files? I have accidentaly deleted some documents from my computer while performing a backup. Actually I deleted them from the backup before I reintroduced them to my computer. They were backed up on there own slave drive.
I want to use file recovery software to recover files from a HDD that was accidentally formatted. I am told not to save anything I can recover to the same drive I am recovering from. The computer only has a CD RW drive and a floppy drive. Can anybody tell me exactly how I can save the files the software finds to either the CD drive or the floppy drive? I downloaded three file recovery programs (1). pci_file recovery (2.) testdisk 6.8 (3.) free undelete. All have similar interface but they don't say how to save to floppy or CD. They just say do not save to same drive from which you recover. The computer is using windows xp and it has about 25 Gigs of free HDD space.
I just recently deleted a folder that i wasn't supposed to delete inside my EXTERNAL HARD DRIVE. Inside that folder were 2 other very important sub folders. It was over 8 gigs so when i deleted it, i unfortunately commited the same mistake of pressing the "yes" button again when it asked the files to bypass the recycling bin being permanently deleted from the computer. In fact it happened so fast it seemed like it vaporized. It was hard to believe that over 8 gigs of files were eliminated that fast, whereas usually any big file i would delete would normally take a while for the computer to process
I have an XP and I deleted a file (.doc) and I wish to recover it; from what I understand when a file is deleted it's not "wiped" off the HD, just the path to it is gone. How hard is it to recover the file?
The files were deleted (and Norton Protected recycle bin emptied) from both the C: (boot drive/OS) and D: drives and when I tried to run System Restore, it gave me an error message, so I assume some of the system files may have been deleted as well. I am not the primary user of this computer and while the computer was functioning after I discovered this, I made the mistake of re-booting the computer and now get a ''NTLDR is missing - press Ctrl + Alt + Delete'' at boot. I have the Sony System recovery discs (no Windows XP disc that I can find) but I don't want to lose any more data and I would still like to try and recover the previously deleted files.
I get a phone call from someone who had the missing NTLDR message. THey said they were on the phone with microsoft for hours. The person outsourced told them to do another install of Windows to get in so they can back up their files. They tell him to install to Windows1 instead of Windows. I guess the smart outsourced agent thought this wouldn't delete any files since my friend told him he has some very important documents on this hard drive. So he installs another Windows and guess what, his documents and settings get overwritten. Looks like these guys really know what they're talking about since any Microsoft person should know this happens no matter where you install Windows
I just recently deleted a folder that i wasn't supposed to delete inside my EXTERNAL HARD DRIVE. Inside that folder were 2 other very important sub folders. It was over 8 gigs so when i deleted it, i fortunately commited the same mistake of pressing the "yes" button again when it asked the files to bypass the recycling bin being permanently deleted from the computer. In fact it happened so fast it seemed like it vaporized. It was hard to believe that over 8 gigs of files were eliminated that fast, whereas usually any big file i would delete would normally take a while for the computer to process. I seriously doubt the worst here, and i have tried about 4 data recovery programs that were only able to detect the very main folder that was deleted but not the more important 2 subfolders inside of it containing the big chunk of the data. I've even been able to detect files that were deleted months ago through these programs, but not the important 8 gigabyte chunk i just deleted an hour ago. By the way i tried scanning both the C rive(main) and the external hard drive and browsing through the :/recycle folders, but to no avail
I did a terrible mistake today. Typically I install XP in C drive and keep My Documents folder in D drive. All of my hard disk drives (except the linux partitions) are NTFS. I encrypted the My Documents folder and all of its files and subfolders.Today I reinstalled XP in the C drive, after a quick format on it. I was unaware of the fact that what might be happened to My Documents folder. Now I can only view the files and folders inside My Documents folder. Neither I open any file, nor I decrypt those files. Windows is saying access denied.
When I was uninstalling Kaspersky, at the end of the uninstallation, it asked me if I wanted to save the NTFS files, IF i were to use Kaspersky in the future. I figured I wouldn't use the antivirus in the future anyways. So, I just uninstalled the NTFS files, and in the end, this window popped up saying that the NTFS files were replaced by unrecognizable files. Another windows popped up saying to insert the Windows XP Pro CD, to replace those unrecognizable files.Nothing is going wrong with the PC as of now, but I am just a little worried about what this might mean.
Can anyone give a run down of the difference in these 2 files and what am I likely to be using with a new windoes x/p system.Also could I use both or am I using both at the minute I installed a new windows x/p and it gave me the choise of either fat or ntfs files to install on the system..Dont really understand what the difference is and what difference it would make to my sytem having one or the other.
I am currently running Fat32 and as noted in a previous post I am building a new computer. I have copied some files on to cds. What I would like to know (if someone has done this) is that can these files be transfered to the new build as I plan on going NTFS. Will they convert from fat32 to NTFS when copied from the disc or even work at all? Or just out of luck and have to start all over?
I have been able to able my last problem where my computer was always rebooting, but now that this is fixed. I have ran in yet another problem... a BIG problem. My 300 GB Maxxtor Hard Drive now lists as Dynamic Unreadable... I am now trying to find a way to recover my files... I am running a PC Inspector File Recovery Scan and then will be a recovermyfiles Scan. Was wondering if anyone has other ideas to fix this/get the files.
A few days ago I noticed that when I tried to play a video file that I downloaded with VLC, it actually opened another video file on that hard drive (500GB Seagate, partition G: used for video files) instead of the one I selected. It had played fine earlier, so something must have happened to cause the file system to point to the wrong file.
I didn't pay too much attention to it at first, but then this morning I noticed that this wasn't the only occurrence of this weird error. When I tried to play a podcast episode with iTunes which is located on another partition and another hard drive (320GB Seagate, partition H: used for music files) it *also* was pointing to another music file on that same hard drive. Because this struck me as very odd I tried opening other files on these partitions. Some opened the right file, some opened wrong ones. I've done a chkdsk on both partitions. On the H: partition it did fix some errors, but G: seemed to be fine. Nevertheless, the problem remained. I've tried to google for this problem, but I'm having trouble finding a good search term. I've never had a problem like this before, so I'm unfamiliar with the terminology that might be used to document this problem.
I have Win XP Pro SP2 I also have an external Lacie 250GB hard disk I want to store my Virtual PC files on. But, it is formatted at FAT32 and I can't put a file on there that is over 4GB. So, I tried to convert the drive to NTFS, but Windows won't let me do this. It keeps telling me the disk is dirty and to run chkdsk / f. Which I have done and completes fine finding no problems on the drive. Yet convert e: /fs:NTFS still does not convert the drive reporting it is dirty. What is causing this and how do I fix it? I have tons of data on the drive so I can't re-partition it as I don't want to loose that data. I need to convert it to NTFS.
My old m/b got fried, so i changed to another m/b and used the same hd for it, and i reinstalled windows XP after deleting the previous, but now when i'm trying to access a folder or file, i get this error "Document may be write protected or encrypted", i really need to open this file, how can i overcome this error?
I've been having a problem with getting BSOD's for a long time now (assuming you don't know, bsod = blue screen of death). For the first couple months I was ok with my computer randomly crashing like this but I started to get tired of so I wrote down the errors I was getting, which were basically all STOP and irql_driver errors, so I figured I would update my drivers and things would start working better. I did that 5 days ago, and now the messages have just changed.
Before, when I used to get them there was either no files listed or three. They were win32k.sys, ha10kx2k.sys and ntfs.sys. The last two traced to either my graphics drivers or my sound drivers so I updated both of those. Now I'm starting to get totally new files, being Klif.sys and bcmwl5.sys. I haven't looked these up yet but will soon. Now, these errors occur at ANYTIME, and I'm not kidding you. Sometimes I come back to my computer after it's been idle for hours and there's a blue screen sitting there (I turned the timed restart off so I could write down the errors). Now, after reading around the internet the only thing I can come to is that my RAM is messed up, but I haven't done a memory check yet (probably should).
Also, if there is any sort of sound playing when I get the BSOD, the sound skips like a record skip and then after 5 seconds starts making the most annoying, high pitched, scratching, static, fuzz noise you could ever hear. Now I've had my computer for 3 years now and these errors started occuring regularly about 8-9 months ago. When I used to get BSOD's infrequently before this period, the sound problem described above still happened, which has led me to believe that my sound card is bad.
I have 2 internal HDDs, and 3 external HDDs. However, the recent addition of a Mac by my sister has forced me to be able to share the external HDDs between computers. I understand that the Mac OSX reads/not writes NTFS but will read/write FAT32. Having been advised by other senior Windows users many years back, all my HDDs are in NTFS. I have found no solution to convert NTFS back to FAT32. Does anyone know if you can do so; without damage/corruption? There is much family pictures, common music in these external HDDs; so needless to say, they are precious
I have recently reformatted my C drive and have now got windows XP pro and most of programs reinstalled, but I have encountered a very distressing problem; I have an Excel file that contains all of my user names and passwords for web sites, programs, hosting services� everything.But since I have reformatted and restored my programs and data I can no longer open this file. Actually I encrypted and entire folder containing this file and several other QuickBooks files. So I guess I really need to be able to access the entire unencrypted folder.The problem seems to be that I did not register my computer with the same name when I reinstalled windows and now I�m locked out of this previously encrypted folder, and, consequently this vitally important file!Can somebody please help me find a way to open this file.
so i was not sure what i was doing when i was messing around with encrypting files,I have my external hard drive and encrypted around a dozen video files, then my copy of windows xp crashed due to a virus, i lost the previous version of xp due to reformatting, however i would like to access the video files again on my external hard drvie. I do not also remember the password from my previous copy of xp also.
