I am currently testing some third-party software on Win XP Pro and my page file has grown to 1.75 Gig and still growing.Is there a utility that can tell me what is in the pagefile and how much space it is taking up.
View 2 Replies
i've been running dvd2svcd to convert my dvd's and since i stopped (yesterday), the system cache in the task manager keeps sucking up all my ram.i restarted-nothing i ran a ram optimizer-reset to 500mb free, then system cache swallowed it up again my page file is set for 1150mb. before, the system ran at about 300-400 mb free with normal programs running (int explrer, solitaire, movies, music, etc).
View 12 Replies View Relatedone of my svchost instances just keeps on growing and growing. after 2 days of uptime it is about 70mb. i have used process explorer to determine that it is the RPC service that has started the instance of svchost from the Network service account. is it normal that this process keeps growing like this, usually when people have a problem with svchost it is because i hogs the cpu but in my case it is hogging the pagefile. i dont experience any XP slowdowns so i dont know if this actually is a problem. but i want to solve this before it becomes a problem. one time the svchost process was 100mb and kept growing
View 6 Replies View RelatedIt all started when I noticed that my bootup time was about 30 seconds slower than it should be. For 30 seconds after the BIOS post screen, my monitor is black and the computer sits there HD LED going full bore. Then it goes to the normal WINXP bootup screens, blah blah blah, then I'm in windows. I ran a safe mode startup and I noticed that the bootup would hang for 30 seconds on windows/system32/config/system. What the heck is that file? I'm certain this can't be normal behavior. What's the problem? The size of my system32/config folder is now 70.3 MB.
View 8 Replies View RelatedMy computer is growing tired. Below this message are some stats about my setup that might be useful. The computer is 5 years old now. I know, ancient by today's standards, but it's what we have right now. Over time, between installed software, uninstalled software, etc., it seems to have gotten slower. I've heard that every once in a while, it's not a bad idea to initialize the hard disk and reinstall the software.
View 2 Replies View RelatedIn one of my technical college class books, MCSE Guide to Microsoft Windows XP Professional Second Edition, Enhanced, on page 492, Chapter 10, it talks about performance tweaking. It talks about the page file, which I know uses free space on the hard drive to act as RAM, and says that to choose the third option of no page filing, you must have have at least one gig of RAM or greater. I have 1.24 Gigs of RAM on my computer and I used to assign 1-2 gigs of hard drive space as Virtual memory(I no longer do that) and now I let Windows choose for me. This chapter also discussed about how using the page is stored on the boot partition by default by Windows and can slightly slow down the computer. My question is, will turning off page filing help or hurt my computer? Should I keep the "system managed" or is it safe for me to turn it off?
View 14 Replies View RelatedCan someone explain to me in plain English (tec talk makes my eyes glaze over :? ) what the page file is? should I configure it a special way? Defrag it?
View 12 Replies View RelatedI am in the process of editing a 30 min movie and am having severe slow-down problems-the same type I had on my old comp with only 1 GB of RAM. I checked the performance tab and only 900 MB of my 2 gig of RAM were being used, with 1.1 GB of PF used. Is it just me, or is this extremely poor resource management? Is there a setting in XP that lets me manage the average RAM and PF usage myself? Edit: If this problem can't be fixed without more RAM, I was thinking about and have the funds to buy another 1 GB of the same RAM to speed it up.
View 2 Replies View Relatedmy C: Drive is growing. I have erased a lot of files, and it's still showing that there is not enough space. What should I do??
View 5 Replies View RelatedI had Windows Explorer open while running my compter today and noticed that C:Program Files and C:Windows folders was growing. They must have started out at about 1GB or so and by the time they had stopped growing the C:Program Files folder was a little over 3GB and the C:Windows folder was a little over 4GB. I don't know if this is normal or not but am including the text from a HiJackThis log. I am running Windows XP Pro. Can someone tell me if there is a problem or if this is normal?
View 4 Replies View RelatedI have stuck another 2 gigs of ram into my rig and I am wondering at this point if a page file is even needed or not? I figure that if I do not need one, my machine would definitly run faster, but if I need one and shut it off I could suffer. One of those damned if you do, damned if you don't things you know.
View 6 Replies View RelatedI read somewhere that after adding RAM you also need to adjust the Paging File. I just found an informative article on this. I checked my Page File properties and it reads: C Drive (that's the only drive, no partition)
Custom Size:
Initial: 336 MB
Maximum: 672 MB
I have 990 MB RAM, hence the recommended 1485 MB (1.5 times)Should I increase the Page File size? I don't have a problem with performance, but I also haven't used any memory intensive programs. Also, is there a risk in allowing the system to set Page File? "System managed size"?And why some people recommend the same size for minimum and maximum?
I have 256 MB stick of ram in this system. when i attempt to set my pagefile to static custom size of 800 initial 800 maximum, even in registry, i click set, and reboot the computer. when it restarts its back at the system managed size of 383. if i change to safe mode, i can set it jsut fine and it saets and stays at 800. however when i reboot after setting it into the safemode, ITS BACK AT 383! EVEN THOUGH THE CUSTOM SETTINGS ARE STILL SET, IT nags AT ME ABOUT VIRTUAL MEMORY BEING TO LOW!@!
This is really offensive to me because i can handle almsot any xp problem and this keeps bugging the crap out of me. i cant run with this crappy of a system without that pagefile being set right and i need this solution ASAP >.<
I'm using Diskeeper 7 to defrag my hard disk. Although it has the Defrag MFT and Pagefile feature, I just can't get it to work when I click on it. I'm showing 6 fragmented files in these areas. Anybody had this problem?
View 7 Replies View RelatedI'm running XP Home on an E6750 system with 2 GB (1x1 GB) DDR2 800 Crucial Ballistix. I'm a big multitasker with nine windows from FireFox usually open with about fiver or more Tabs open with in them and sometime have two or more BT open. My memory jump up 1+ GB and my system starts to slow down in responding with changing windows and task.
I set up my Page File with 33 MB on my C: drive for Dump File and 3072 MB on my E:drive for my main Page File. When I looked at my % Usage in the Performance console in Administrative Tools, the C: drive's Page File are the only one being use just under 100% and the E: drive is barely reaching 3% usage... I think that not allocating my second drive's Page File is what's causing the slow down. Does anyone know what's happening with the Page File on my second drive?
hi guys,i,m having a problem changing my pagefile.i have it set to 1536 and when i restart the pc it says currently allocated is 671mb.how can i reset to 1536mb.i have 512 memory and a amd xp 2600 hp.
View 2 Replies View Relatedhow do i reset my page file back to regular it wont let me do it again it says its too small for the operation
View 1 Replies View RelatedI will be creating a partition on the second Hdd for the pagefile.I have 2 Gig of Ram installed.My question is what size should the partition be? Less than than 8 Gigs I am aware of.But more importantly, what Min and Max should the settings be for the PagFile. Perhaps let the system decide?If I do set a PagFile on the OS partition I am considering 2MB - 200Mb to generate a kernel dump report. Note: Although I will have an Image of OS If the issue at hand is small enough I amy gain some experience in trying to fix it using the reports.
View 9 Replies View RelatedI am running 2 gig of ram on a 160 gig harddrive Presario. I don't usually keep over 3 windows open at any given time. I know Windows suggests 1-1/2 times ram for page file size, but that seems to slow the start-up. What is the minimum I can get away with and be safe? Or do I really need a page file? any input is helpful.
View 3 Replies View RelatedThis isnt really a problem but i was wondering if your page file size really makes a difference on performance. I tried to switch it up from 755MB to 900MB hoping it would make games run faster but it switched right back to 755.
View 5 Replies View RelatedI have a Dell Dimension 5100 with Winxp pro sp3 1 Meg of RAM and extra 500 gig hd:
I changed (increaded) the Page File zise (Virtual Memory) on both drives and it corrupted the Registry. Now it does not even let me re-install winxp on that drive. Towards the end of the installation I get a message that it cannot copy certain files. The file names varies according to the SP version on the winxp pro cd.
Also, I lost the original OS disk from DELL.
pagefile.sys is corrupted since it is fixed a 2GB whatever setting (no page file, system managed...). I choose in the virtual memory panel. I can't changed its size and would like to delete it so windows xp (sp2) can recreate a new correct one. the purge at shutdown does not work too and I don't know the password for
the recovery console under the DOS. I am looking for a simple solution to delete this file which is on an ntfs partition.
I got the error message that there is "Not enough paging file or virtual memory" and instructed me to change the paging file size. Which I did.My RAM is 256MB btw.
Here's a pic of the Virtual Memory ctrl panel:after changing the page file size, the "Currently allocated" file size is still at 0 MB. No matter how many times I've changed it (Yes I've clicked Set everytime) and rebooted my PC, it's still at 0 MB. And then the error message keeps coming out at every reboot.Here's a pic of the Performance Option control panel.
I am running Windows XP, i want to change my virtual memory to custom page file size, can someone tell me the ideal minimum and maximum sizes recommended.
View 8 Replies View RelatedWhen I try to send a multi-page fax from WORD or Power-Point, only the first page or slide appears in the FAX. This is a recently developed problem. I've successfully sent multi-page FAXes in the past.
View 2 Replies View RelatedI continuously get 'ERROR this page cannot be displayed' when I try to send a greeting card or access another web page. What is going on? I tried to fix and enabled all that I thought was necessary on settings.
View 8 Replies View RelatedMy Hard Disk is growing itself , every time i check it , the space just keeps getting lower and lower . This keeps happening only to local disk C where my windows is installed , it seems there's a virus that infected it , I already scanned it but nothing happened , he still kept growing . Around 25 Gb are alredy filled by this "virus" thing if I can call it that way .
View 16 Replies View RelatedI keep getting blue screen with page fault in non page area at start up. How do I fix this? I have Windows XP. Dell desktop.
View 6 Replies View RelatedI often right click in IE and select Create Shortcut.It puts a shortcut and my desktop to that page. This mysteriously stopped working. The icon appears on my desktop with the page title and all, but when I double click it, it just opens up my browser and loads about:blank.In the shortcut file's properties, and then gives me the file's size, location,etc.but it doesn't list the URL anywhere. It's just getting on my nerves having to copy a page's URL to a text file on my desktop if I want to remind myself of something.
View 1 Replies View RelatedI was listening to some Good Charlotte, and in my D: and all the sudden I get a blue screen sayin page fault none page area... I also got this problem when I tried to reinstall Media Player 9. It sounds like some system file is triggering tihs
View 2 Replies View Relatedin a fit of "I'm going to clean all the old junk off my computer"... I accidently started to remove something connected to ATI. Then the computer froze. Now when I try to reboot I get the blue screen with the Page Fault in Non Page Area message. I have tried a System Restore
View 3 Replies View Related
