System Not Allocating Page File On Second Drive?
Jul 20, 2010
I'm running XP Home on an E6750 system with 2 GB (1x1 GB) DDR2 800 Crucial Ballistix. I'm a big multitasker with nine windows from FireFox usually open with about fiver or more Tabs open with in them and sometime have two or more BT open. My memory jump up 1+ GB and my system starts to slow down in responding with changing windows and task.
I set up my Page File with 33 MB on my C: drive for Dump File and 3072 MB on my E:drive for my main Page File. When I looked at my % Usage in the Performance console in Administrative Tools, the C: drive's Page File are the only one being use just under 100% and the E: drive is barely reaching 3% usage... I think that not allocating my second drive's Page File is what's causing the slow down. Does anyone know what's happening with the Page File on my second drive?
View 4 Replies
ADVERTISEMENT
Oct 14, 2009
I'm slowly running out of space on my Windows C Drive, with all the updates and stuff like that. Is there any way to move free space from other drives into the C drive?
View 4 Replies
View Related
Aug 4, 2007
Is it possible to allocate more space to a drive without doing the whole formatting process?
View 11 Replies
View Related
Jul 17, 2009
I will be creating a partition on the second Hdd for the pagefile.I have 2 Gig of Ram installed.My question is what size should the partition be? Less than than 8 Gigs I am aware of.But more importantly, what Min and Max should the settings be for the PagFile. Perhaps let the system decide?If I do set a PagFile on the OS partition I am considering 2MB - 200Mb to generate a kernel dump report. Note: Although I will have an Image of OS If the issue at hand is small enough I amy gain some experience in trying to fix it using the reports.
View 9 Replies
View Related
Aug 1, 2005
i've been running dvd2svcd to convert my dvd's and since i stopped (yesterday), the system cache in the task manager keeps sucking up all my ram.i restarted-nothing i ran a ram optimizer-reset to 500mb free, then system cache swallowed it up again my page file is set for 1150mb. before, the system ran at about 300-400 mb free with normal programs running (int explrer, solitaire, movies, music, etc).
View 12 Replies
View Related
Nov 3, 2009
in a fit of "I'm going to clean all the old junk off my computer"... I accidently started to remove something connected to ATI. Then the computer froze. Now when I try to reboot I get the blue screen with the Page Fault in Non Page Area message. I have tried a System Restore
View 3 Replies
View Related
Jan 24, 2009
Would someone please help me if possible,to resolve these problems and why these problem occurred.I've got blue page three times before these problems occurred.windows xp home sp3 1-right click on drive c and selecting check disk ,enter: check disk was unable to complete the disk check.2-type chkdsk c: x f
in command prompt and restart...this message:the type of file system is raw.check disk is not available for raw drives. 3-disk management shows drive c healthy and with the FAT32 file system structure.
4-type chkdsk c: in command prompt...enter:the type of file system is FAT32....windows find errors in file system.
View 13 Replies
View Related
Feb 3, 2006
Trying to help upgrade my hard drive. I have a Local C drive 20 GB and I have a Maxtor 120 GB in my E: drive. I have previously sent an exact image copy of my C drive to my E: drive using Norton's ghost 9.0 symantec. Since he has tinkered with my Hard drive it is not even recognizing a file system at all. It asks if I want to format the drive and I know that will wipe it out completely if I do that. The exact warning or prompt that shows goes as follows. The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and the volume is not corrupted. I run windows XP home edition and my computer is a pentium 3 300 SE by gateway.
View 20 Replies
View Related
Nov 30, 2008
I am trying to install driver for blackberry storm. I installed the driver but Wizard installer wouldn't find it, even when I identified specific location. I did workaround on device manager by pointing to the device (USB controller) then browsing to the driver's location and when it recognized it I hit the "next" button for the install, the file transfer hangs.
View 12 Replies
View Related
Oct 12, 2008
H i have an old 80gb drive that i wish to use for storage by use of a hard drive enclosure. It had an old xp installed on it which ino longer wish to use, but when i hook it up to the pc the drive doesn't show up, i mounted the drive on a linux(ubuntu) system and managed to delete everything except the windows folder, i believe the ntfs file system is stopping it from being deleted, my question is how can i delete the windows folder so that i can format and reuse the drive without putting it into the pc, any further info needed will be duly supplied
View 3 Replies
View Related
Jul 18, 2009
In one of my technical college class books, MCSE Guide to Microsoft Windows XP Professional Second Edition, Enhanced, on page 492, Chapter 10, it talks about performance tweaking. It talks about the page file, which I know uses free space on the hard drive to act as RAM, and says that to choose the third option of no page filing, you must have have at least one gig of RAM or greater. I have 1.24 Gigs of RAM on my computer and I used to assign 1-2 gigs of hard drive space as Virtual memory(I no longer do that) and now I let Windows choose for me. This chapter also discussed about how using the page is stored on the boot partition by default by Windows and can slightly slow down the computer. My question is, will turning off page filing help or hurt my computer? Should I keep the "system managed" or is it safe for me to turn it off?
View 14 Replies
View Related
Jul 20, 2006
Can someone explain to me in plain English (tec talk makes my eyes glaze over :? ) what the page file is? should I configure it a special way? Defrag it?
View 12 Replies
View Related
Jun 10, 2007
I am in the process of editing a 30 min movie and am having severe slow-down problems-the same type I had on my old comp with only 1 GB of RAM. I checked the performance tab and only 900 MB of my 2 gig of RAM were being used, with 1.1 GB of PF used. Is it just me, or is this extremely poor resource management? Is there a setting in XP that lets me manage the average RAM and PF usage myself? Edit: If this problem can't be fixed without more RAM, I was thinking about and have the funds to buy another 1 GB of the same RAM to speed it up.
View 2 Replies
View Related
Aug 8, 2005
Running Windows XP home, well-protected from viruses and spyware with all the usual recommended programs. I have a 160G external firewire hard drive, NTFS system. Cannot access data all of a sudden, I am getting an error message, "file system corrupt and unreadable." In disk management, the drive is listed as healthy, 160G, but no NTFS listed. What could have caused this, and is there a way to retrieve the data? Are there any low-cost or freeware programs to do this, or is it inevitable to spend a "fortune?"
View 32 Replies
View Related
Jul 10, 2005
I recently sent my computer for repair due to virus-related problems. Anyway, the repair person had to reinstall Win XP(Home) from scratch and told me that he had partitioned the drive (and without my permission!) in two: DBackup and CSystem (Backup consists of the files from the previous system). I notice that there is a duplication of files due to this partition. For example, song A would appear twice on Win Media PlayerCDocumentsandSettings/Owner/My Documents/MyMusic/SongA AND Dmydocbackup/MyMusic/SongA). I don't know if there are any duplication of other files yet. Plus, I realised during Disk Cleanup that the system's Temporary Internet Files is located in 'Backup drive' instead of 'System'. Shouldn't this folder be in the other drive i.e. system drive, since Backup is just,well, backup(of the old drive). The WINDOWS folder also appears in both drives.
I've never had partitioned drives so this is causing major headaches for me. If there is a need for me to un-partition my drives to clear the mess, can I do it without re-installing the whole system from the Cd? Sorry it's a long one How many times can you reinstall from the Cd before it cannot be used anymore (I hear there is a limit)
View 6 Replies
View Related
Apr 1, 2006
I have stuck another 2 gigs of ram into my rig and I am wondering at this point if a page file is even needed or not? I figure that if I do not need one, my machine would definitly run faster, but if I need one and shut it off I could suffer. One of those damned if you do, damned if you don't things you know.
View 6 Replies
View Related
Jul 19, 2006
My prob is a bit of a saga I defragged my Win XP Media PC a few days ago and then I noticed a clicking noise coming from the hard drive, I called PC servicecall managed to find a freephone number and the chap suggested I do a scandisk, he said to call back with the diagnosis later.
After the PC did two scandisks I managed to stop it when it was about to do a 3rd, I rebooted the PC and it loaded with no 'start' button or clock on the taskbar, so I rebooted. Then I got a message saying 'it can't load as a file was missing or corrupt windows/system32/configuration/system' it said to put in the original CD and type 'r' to repair.
Well the PC didn't come with any CD's and I only have one that I made after I'd had the PC for a month - a recovery disk.
So I called PC Servicecall back and told the guy what happened and I've got another harddrive arriving tomorrow - trouble is I need to get the info from my hard drive before I send it back to them.
I've looked at MS support site and there's options to do a manual repair (I'll copy and paste info here)
Method 1: Replace the SYSTEM Hive
Method 2: Restore the SYSTEM File from the SYSTEM.ALT Backup File
Method 3: Reduce the Size of the SYSTEM File
Method 4: Restore the SYSTEM Hive from Backup
Which all sound hunky dorey but I don't have any original bootable CD (the PC doesn't have a floppy drive), so I can't type 'r' to repair!!!!
In my possesion I do have an XP Pro CD, a Win2000 CD and a Win98 CD - my question is can I use these other CD's to try a 'repair' and get into the 'manual' area to try the methods above (the OS is Win Media Edition on the PC)?
View 8 Replies
View Related
Aug 22, 2007
I got a computer from my boss that had a bad motherboard and processor, i put a new in it and now im trying to format the hd but it has xp on it and has a password, my boss forgot what it was so im trying to format it from dos i wrote "format c:" and it says
"The type of the file system is NTFS. Enter current volume lable for drive C:
View 4 Replies
View Related
Jun 29, 2005
I am currently testing some third-party software on Win XP Pro and my page file has grown to 1.75 Gig and still growing.Is there a utility that can tell me what is in the pagefile and how much space it is taking up.
View 2 Replies
View Related
Nov 23, 2008
I read somewhere that after adding RAM you also need to adjust the Paging File. I just found an informative article on this. I checked my Page File properties and it reads: C Drive (that's the only drive, no partition)
Custom Size:
Initial: 336 MB
Maximum: 672 MB
I have 990 MB RAM, hence the recommended 1485 MB (1.5 times)Should I increase the Page File size? I don't have a problem with performance, but I also haven't used any memory intensive programs. Also, is there a risk in allowing the system to set Page File? "System managed size"?And why some people recommend the same size for minimum and maximum?
View 4 Replies
View Related
Jan 11, 2005
I have 256 MB stick of ram in this system. when i attempt to set my pagefile to static custom size of 800 initial 800 maximum, even in registry, i click set, and reboot the computer. when it restarts its back at the system managed size of 383. if i change to safe mode, i can set it jsut fine and it saets and stays at 800. however when i reboot after setting it into the safemode, ITS BACK AT 383! EVEN THOUGH THE CUSTOM SETTINGS ARE STILL SET, IT nags AT ME ABOUT VIRTUAL MEMORY BEING TO LOW!@!
This is really offensive to me because i can handle almsot any xp problem and this keeps bugging the crap out of me. i cant run with this crappy of a system without that pagefile being set right and i need this solution ASAP >.<
View 14 Replies
View Related
May 7, 2005
I'm using Diskeeper 7 to defrag my hard disk. Although it has the Defrag MFT and Pagefile feature, I just can't get it to work when I click on it. I'm showing 6 fragmented files in these areas. Anybody had this problem?
View 7 Replies
View Related
Sep 4, 2005
hi guys,i,m having a problem changing my pagefile.i have it set to 1536 and when i restart the pc it says currently allocated is 671mb.how can i reset to 1536mb.i have 512 memory and a amd xp 2600 hp.
View 2 Replies
View Related
Sep 20, 2009
how do i reset my page file back to regular it wont let me do it again it says its too small for the operation
View 1 Replies
View Related
Jul 3, 2010
I am running 2 gig of ram on a 160 gig harddrive Presario. I don't usually keep over 3 windows open at any given time. I know Windows suggests 1-1/2 times ram for page file size, but that seems to slow the start-up. What is the minimum I can get away with and be safe? Or do I really need a page file? any input is helpful.
View 3 Replies
View Related
Mar 21, 2005
This isnt really a problem but i was wondering if your page file size really makes a difference on performance. I tried to switch it up from 755MB to 900MB hoping it would make games run faster but it switched right back to 755.
View 5 Replies
View Related
Oct 3, 2009
I have a Dell Dimension 5100 with Winxp pro sp3 1 Meg of RAM and extra 500 gig hd:
I changed (increaded) the Page File zise (Virtual Memory) on both drives and it corrupted the Registry. Now it does not even let me re-install winxp on that drive. Towards the end of the installation I get a message that it cannot copy certain files. The file names varies according to the SP version on the winxp pro cd.
Also, I lost the original OS disk from DELL.
View 1 Replies
View Related
Sep 5, 2005
pagefile.sys is corrupted since it is fixed a 2GB whatever setting (no page file, system managed...). I choose in the virtual memory panel. I can't changed its size and would like to delete it so windows xp (sp2) can recreate a new correct one. the purge at shutdown does not work too and I don't know the password for
the recovery console under the DOS. I am looking for a simple solution to delete this file which is on an ntfs partition.
View 8 Replies
View Related
Apr 23, 2006
I got the error message that there is "Not enough paging file or virtual memory" and instructed me to change the paging file size. Which I did.My RAM is 256MB btw.
Here's a pic of the Virtual Memory ctrl panel:after changing the page file size, the "Currently allocated" file size is still at 0 MB. No matter how many times I've changed it (Yes I've clicked Set everytime) and rebooted my PC, it's still at 0 MB. And then the error message keeps coming out at every reboot.Here's a pic of the Performance Option control panel.
View 12 Replies
View Related
Dec 7, 2007
I am running Windows XP, i want to change my virtual memory to custom page file size, can someone tell me the ideal minimum and maximum sizes recommended.
View 8 Replies
View Related
Jul 6, 2005
when I double click any drive (including zips cd ets) instead of opening the drive to show its contents it goes to the search page? also I have noticed that "search" is at the top of the drives' right click menu shown in this ...
View 1 Replies
View Related
