I have stuck another 2 gigs of ram into my rig and I am wondering at this point if a page file is even needed or not? I figure that if I do not need one, my machine would definitly run faster, but if I need one and shut it off I could suffer. One of those damned if you do, damned if you don't things you know.
View 6 Replies
I used HDClone to clone a 10 GB to a 40 GB disk. The program is very simple dealing with Source and Target, bit to bit copy. I left the option bit to bit copy unchecked in order to leave the recommended setting.After finishing this I connected the cloned drive to the master connector and removed the original disk from the system. I already thought it wouldn't let me boot to XP because it's a different disk. After the error I restarted booting the XP-Disk. I tried repairing using bootcfg /add. It found the Windows installation and I could add it. But after the restart, same again:Error loading operating system.So, what could be the reason. Partition not set to active? MBR? Should I make a bit to bit copy?
View 1 Replies View RelatedI am used to running windows xp Pro 32 bit with 4 gigs of ram and only 3.5 showing up, but ever since I installed a new motherboard, the ram is only showing 3.24 now. Does anyone know how to fix this or what may be causing this? Even the bios shows my entire 4 gigs of ram.and I am also using 2, 2 gig sticks of DDR2 800 MHz ram for a total of 4 gigs of RAM.
View 1 Replies View RelatedI want to install XP Home 32 bit along side my Vista Ultimate x64 in a dual-boot configuration. I've set up numerous dual-boot systems so I got that covered.This is on my new build and I'm currently running Vista with RAID 0 on two Raptor 150's. I'm going to put XP on the third Rap-tor.My only concern is the 32 bit XP install will have problems with so much RAM. I know it will only use and recognize 3 gigs or so but will it have any other effects?
View 1 Replies View RelatedI've heard a lot of good things about Sure Delete, which is used to delete files from your computer permanently (I'm really paranoid about identity theft). When I used it, I just expected it to clear these deleted files from my system so they couldn't be brought back, but what actually happened was much different. I came back to my computer to find that my 400 gigabyte hard drive that was originally less than 90 gigabytes full now has 397 gigabytes used and runs at an astoundingly slow speed. The readme for the program claims that if such a case occurs to delete the sdel.tmp files in the directory cleared, which in my case was C:. Unfortunately, they don't exist there, or anywhere else. I've done over 15 full system scans, used the Windows XP Disk Cleanup tool 3 times, as well as 2 3rd-party disk cleaners, attempted a System Restore (Which didn't work), tried to email the makers of Sure Delete (Which returned an error every time), re-ran the program twice, and uninstalled the program, restarted my computer, and checked again. Nothing has done anything. If you wanna check out Sure Delete,
View 14 Replies View RelatedWhat is using all the space on my Hard Drive, When I go online I always lose a lot of space, a lot more than I what I start with. I know how to do all the maintenace of temp. I-net files and stuff, but when I gain 30 megabytes I lose 200-300 Megs next day or two, All my settings regarding these areas are good.I was looking at my Restore Points and notice sometime 2-3-times a week I gat a Software Distribution Service 3.0 ,, When I put the curser on it, it reads
View 6 Replies View RelatedI used Win98SE before installing WinXP Pro about a year ago. I have 2 internal hard drives and am running a dual boot with 98SE on the C drive and the K drive has the XP Pro. C drive was partitioned at the outset of dual booting and has drives E through H. Drive K which has XP Pro is beginning to fill and in fact, I currently have only 4 gigs available for use. Now the question: can I move some of the unused gigs in drives G and H to the K drive?? Oh, 98SE is FAT32 and Pro has NTFS formatting. If the answer is yes then, of course, I will need to know how. And as usual, TIA.
View 11 Replies View RelatedIn one of my technical college class books, MCSE Guide to Microsoft Windows XP Professional Second Edition, Enhanced, on page 492, Chapter 10, it talks about performance tweaking. It talks about the page file, which I know uses free space on the hard drive to act as RAM, and says that to choose the third option of no page filing, you must have have at least one gig of RAM or greater. I have 1.24 Gigs of RAM on my computer and I used to assign 1-2 gigs of hard drive space as Virtual memory(I no longer do that) and now I let Windows choose for me. This chapter also discussed about how using the page is stored on the boot partition by default by Windows and can slightly slow down the computer. My question is, will turning off page filing help or hurt my computer? Should I keep the "system managed" or is it safe for me to turn it off?
View 14 Replies View RelatedCan someone explain to me in plain English (tec talk makes my eyes glaze over :? ) what the page file is? should I configure it a special way? Defrag it?
View 12 Replies View RelatedI am in the process of editing a 30 min movie and am having severe slow-down problems-the same type I had on my old comp with only 1 GB of RAM. I checked the performance tab and only 900 MB of my 2 gig of RAM were being used, with 1.1 GB of PF used. Is it just me, or is this extremely poor resource management? Is there a setting in XP that lets me manage the average RAM and PF usage myself? Edit: If this problem can't be fixed without more RAM, I was thinking about and have the funds to buy another 1 GB of the same RAM to speed it up.
View 2 Replies View RelatedI am currently testing some third-party software on Win XP Pro and my page file has grown to 1.75 Gig and still growing.Is there a utility that can tell me what is in the pagefile and how much space it is taking up.
View 2 Replies View RelatedI read somewhere that after adding RAM you also need to adjust the Paging File. I just found an informative article on this. I checked my Page File properties and it reads: C Drive (that's the only drive, no partition)
Custom Size:
Initial: 336 MB
Maximum: 672 MB
I have 990 MB RAM, hence the recommended 1485 MB (1.5 times)Should I increase the Page File size? I don't have a problem with performance, but I also haven't used any memory intensive programs. Also, is there a risk in allowing the system to set Page File? "System managed size"?And why some people recommend the same size for minimum and maximum?
I have 256 MB stick of ram in this system. when i attempt to set my pagefile to static custom size of 800 initial 800 maximum, even in registry, i click set, and reboot the computer. when it restarts its back at the system managed size of 383. if i change to safe mode, i can set it jsut fine and it saets and stays at 800. however when i reboot after setting it into the safemode, ITS BACK AT 383! EVEN THOUGH THE CUSTOM SETTINGS ARE STILL SET, IT nags AT ME ABOUT VIRTUAL MEMORY BEING TO LOW!@!
This is really offensive to me because i can handle almsot any xp problem and this keeps bugging the crap out of me. i cant run with this crappy of a system without that pagefile being set right and i need this solution ASAP >.<
I'm using Diskeeper 7 to defrag my hard disk. Although it has the Defrag MFT and Pagefile feature, I just can't get it to work when I click on it. I'm showing 6 fragmented files in these areas. Anybody had this problem?
View 7 Replies View Relatedi've been running dvd2svcd to convert my dvd's and since i stopped (yesterday), the system cache in the task manager keeps sucking up all my ram.i restarted-nothing i ran a ram optimizer-reset to 500mb free, then system cache swallowed it up again my page file is set for 1150mb. before, the system ran at about 300-400 mb free with normal programs running (int explrer, solitaire, movies, music, etc).
View 12 Replies View RelatedI'm running XP Home on an E6750 system with 2 GB (1x1 GB) DDR2 800 Crucial Ballistix. I'm a big multitasker with nine windows from FireFox usually open with about fiver or more Tabs open with in them and sometime have two or more BT open. My memory jump up 1+ GB and my system starts to slow down in responding with changing windows and task.
I set up my Page File with 33 MB on my C: drive for Dump File and 3072 MB on my E:drive for my main Page File. When I looked at my % Usage in the Performance console in Administrative Tools, the C: drive's Page File are the only one being use just under 100% and the E: drive is barely reaching 3% usage... I think that not allocating my second drive's Page File is what's causing the slow down. Does anyone know what's happening with the Page File on my second drive?
hi guys,i,m having a problem changing my pagefile.i have it set to 1536 and when i restart the pc it says currently allocated is 671mb.how can i reset to 1536mb.i have 512 memory and a amd xp 2600 hp.
View 2 Replies View Relatedhow do i reset my page file back to regular it wont let me do it again it says its too small for the operation
View 1 Replies View RelatedI will be creating a partition on the second Hdd for the pagefile.I have 2 Gig of Ram installed.My question is what size should the partition be? Less than than 8 Gigs I am aware of.But more importantly, what Min and Max should the settings be for the PagFile. Perhaps let the system decide?If I do set a PagFile on the OS partition I am considering 2MB - 200Mb to generate a kernel dump report. Note: Although I will have an Image of OS If the issue at hand is small enough I amy gain some experience in trying to fix it using the reports.
View 9 Replies View RelatedI am running 2 gig of ram on a 160 gig harddrive Presario. I don't usually keep over 3 windows open at any given time. I know Windows suggests 1-1/2 times ram for page file size, but that seems to slow the start-up. What is the minimum I can get away with and be safe? Or do I really need a page file? any input is helpful.
View 3 Replies View RelatedThis isnt really a problem but i was wondering if your page file size really makes a difference on performance. I tried to switch it up from 755MB to 900MB hoping it would make games run faster but it switched right back to 755.
View 5 Replies View RelatedI have a Dell Dimension 5100 with Winxp pro sp3 1 Meg of RAM and extra 500 gig hd:
I changed (increaded) the Page File zise (Virtual Memory) on both drives and it corrupted the Registry. Now it does not even let me re-install winxp on that drive. Towards the end of the installation I get a message that it cannot copy certain files. The file names varies according to the SP version on the winxp pro cd.
Also, I lost the original OS disk from DELL.
pagefile.sys is corrupted since it is fixed a 2GB whatever setting (no page file, system managed...). I choose in the virtual memory panel. I can't changed its size and would like to delete it so windows xp (sp2) can recreate a new correct one. the purge at shutdown does not work too and I don't know the password for
the recovery console under the DOS. I am looking for a simple solution to delete this file which is on an ntfs partition.
I got the error message that there is "Not enough paging file or virtual memory" and instructed me to change the paging file size. Which I did.My RAM is 256MB btw.
Here's a pic of the Virtual Memory ctrl panel:after changing the page file size, the "Currently allocated" file size is still at 0 MB. No matter how many times I've changed it (Yes I've clicked Set everytime) and rebooted my PC, it's still at 0 MB. And then the error message keeps coming out at every reboot.Here's a pic of the Performance Option control panel.
I am running Windows XP, i want to change my virtual memory to custom page file size, can someone tell me the ideal minimum and maximum sizes recommended.
View 8 Replies View RelatedWhen I try to send a multi-page fax from WORD or Power-Point, only the first page or slide appears in the FAX. This is a recently developed problem. I've successfully sent multi-page FAXes in the past.
View 2 Replies View RelatedI continuously get 'ERROR this page cannot be displayed' when I try to send a greeting card or access another web page. What is going on? I tried to fix and enabled all that I thought was necessary on settings.
View 8 Replies View RelatedI keep getting blue screen with page fault in non page area at start up. How do I fix this? I have Windows XP. Dell desktop.
View 6 Replies View RelatedI often right click in IE and select Create Shortcut.It puts a shortcut and my desktop to that page. This mysteriously stopped working. The icon appears on my desktop with the page title and all, but when I double click it, it just opens up my browser and loads about:blank.In the shortcut file's properties, and then gives me the file's size, location,etc.but it doesn't list the URL anywhere. It's just getting on my nerves having to copy a page's URL to a text file on my desktop if I want to remind myself of something.
View 1 Replies View RelatedI was listening to some Good Charlotte, and in my D: and all the sudden I get a blue screen sayin page fault none page area... I also got this problem when I tried to reinstall Media Player 9. It sounds like some system file is triggering tihs
View 2 Replies View Relatedin a fit of "I'm going to clean all the old junk off my computer"... I accidently started to remove something connected to ATI. Then the computer froze. Now when I try to reboot I get the blue screen with the Page Fault in Non Page Area message. I have tried a System Restore
View 3 Replies View Related
