I have a winxp and vista laptop. I am trying to connect both together using cross cable. I configured a static IP 192.168.0.1 and 192.168.0.2 respectively for each system. I have also made sure that they are on the same workgroup. Vista laptop can ping winxp laptop but winxp laptop cannot ping vista laptop.I tried using the same OS i.e winxp it work just fine.
View 4 Repliestrying to "Home Network" between Windows XP Media Center Edition service pack 3 & Windows Vista Home Premium. The Internet connection originates thru a DSL connection from "Westell" Modem to "D-Link" Ethernet Switch and is functioning on BOTH computers. The file sharing is ANOTHER story--The Vista OS "sees" & shares ALL the files/drives shared FROM XP--HOWEVER, the XP computer ONLY "sees" & shares "Public" & "User" Folders--when I try to access the C-Drive Folder (which I have set up to share like the others, I get the following message: "C is not accessible. You might not have permission to us e this network resource. Contact the administrator of the server to find out if you have access permissions."
I have turned off my Windows Firewall on Vista & have tried repeatedly to allow access to "everyone" regarding the C Drive on the Vista computer--and after a restart the same issue exists.
I bought a new laptop with Windows XP in it, I wanted to transfer some files from my Desktop PC which has Vista to my laptop with XP, I bought a Belkin USB Data Transfer Cable to transfer files with help of Windows Easy Transfer but when I installed the software provided with it, it seemed that I can only transfer files from XP to Vista.
View 1 Replies View RelatedI'm trying to make a dual boot system Vista/XP with my HP Media Center purchased in 2007 with Vista pre-installed. Inside Vista I created the partition for XP (disk D and rebooted with the 'XP Pro SP2' inside. After selecting its correct partition for installing it copies all files on hard disk and it reboots in order to start its installation, upon rebooting and starting first time from hard disk, it says that there is an error in the system and stops. If I install only XP on the system it works correctly even though some newest hardware is not recognized. I had already made a dual boot two years ago with a 2007 XP Student Edition and it smoothly. If it is due to the XP version being too old that maybe cannot deal with the boot record created by Vista
Or perhaps such an old XP cannot recognize a boot hard disk that is not C:?
Is there a way to bypass this point (perhaps fixing the boot record) in order to continue correctly the installation?
Thank you,
Al
I originally had Vista Business edition on my laptop and decided to dual boot with XP. So far I created a partition on the same drive (C: ) as Vista and installed XP on it. how do I choose between Vista and XP when my computer boots up? When I turn on my computer it boots straight into XP and doesn't show that menu where it gives me a choice of which OS I want to boot
View 1 Replies View RelatedCan i put Vista on a computer as a second operating system and dual boot with XP? Is there a risk of Vista interfering with the XP partition
View 2 Replies View RelatedIs it possible to have a Vista based system and then load XP on the same system and switch between the two. I know mac's have something similar to this but i have an HP dv7 pavilion notebook with an AMD Turion x2 Dual-core mobile RM-70 2ghz processor, 4 gb of ram, ATI Radeon HD 3200 graphics chip set, and 156GB of free harddrive space
View 7 Replies View Relatedjust ordered a new pc that is on its way pre loaded with WIN XP PRO SP2. It also come with a free VISTA BUSSINES upgrade. I want to set up a dual boot system when i get my VISTA disk. should i use partition magic and set up a new partition for vista or is there a better way of doing this
View 2 Replies View RelatedI initially started with XP and created a separate partition for Vista, installing Vista on the other partition, Vista sees the (XP) Earlier version of windows. When I choose XP, I get the following error: NTOSKRNL.EXE is missing or corrupt. If I repair the XP with fixmbr - I end up screwing up Vista. Then when I repair Vista, it end's screwing up XP
View 3 Replies View Relateddoes ne1 know if vista can dual boot with xp no problems yet only wonderin cuz we are very close to vista, and i want it. i cannot use my dorm room internet with vista cuz of bs security shit.
View 1 Replies View RelatedI was dual booting XP and Vista but didn't want Vista anymore. So I got rid of Vista, and that's all said and done now. Problem is, the boot loader is still coming up telling me to choose between "Earlier Version of Windows" and "Windows Vista". How to I get rid of it without using Vista's boot manager?
View 6 Replies View RelatedI'm currently running Vista on a raid 0 array, and want to dual with XP. I have two partitions, one with vista and the other that I tried installing XP on. After it finishes the initial installation and restarts it says to press any key to boot from the CD. I wait without pressing anything and than it says that there was an error reading the disk. If I remember correctly, after it restarts it goes strait into windows setup. This happens every time I try restarting, but I can get back into vista by putting the hard drive to boot first. In vista I can see the other partition where XP was installed, and inside is just a folder titled WINDOWS and it seems like all the windows files are in there
View 5 Replies View RelatedI cannot ping xp computers. I can ping win2k machines all day long. The xp boxes are running
sp2, but I have a policy in effect that disables the firewall. I also have a
policy in effect that renames the administrator and guest accounts. IF the
firewall is disabled is there any reason that any of these machines would
not respond to a ping request. Wouldn't be a big deal, but my print tracking
app requires it. All XP machines can communicate with the network just fine.
I can ping anything from each XP machine successfully.
I am using a borrowed computer which has Windows XP installed. I am having difficulty getting a brand new game to load a saved file. I don't know where to look to do a scandisk on this OS.
View 6 Replies View RelatedWhen I opened up the case, the northbridge heatsink clip had snapped off. I put the case on it's side and reseated the heatsink, and put a case fan over it. I reformatted and installed winXP. The computer freezes a minute or so after entering windows. Also ran ubuntu linux off a usb stick and it would freeze after 5 or so minutes. Ran memtest and no errors after 9 hours, Speedfan s.m.a.r.t says the hard drive is fine. I booted into Safemode, and ran orthos small ffts cpu test, and no errors after an hour.
View 6 Replies View RelatedMay I know what's WinXP's basic RAM? or how can I know how much RAM I have.
View 14 Replies View RelatedHow do I block a single cookie in IE6? There is one particular one that I wish to block without blocking others.
View 1 Replies View RelatedI have a Gateway FX530XM desktop which came pre-loaded with Winxp mce. I believe that mce is the cause of a lot of problems I've been having so I want to install winxp pro as a second OS.I have created a new primary partition on my HD and set it as active then rebooted with the winxp pro cd in the drive.The cd gets read and I can see my HD access light blinking. The installer asks me for a cd with a qualifying OS because my winxp pro is an upgrade. I go through this and then the installer goes to the screen that says to select a partition to install to. The problem is that what is displayed is several lines saying there is no hard drive to install to. Quite strangely, if my external hard drives (LaCie or Seagate) are on, the installer sees them as partitions that I could install to. I can't use the external hd because I don't think I can boot to it. If I could boot to it I could probably copy the new install to my internal hard drive.
View 8 Replies View RelatedI have at home a desktop connected by dial up (snail version), and a laptop in the office, connected by DSL.If I want to update Win XP, or others programs (all licenced, don't worry), can I download on my laptop, save on a stick, and install on my desktop?
View 7 Replies View RelatedI have 2 maxtor (60gb pr master and 200gb pr slave) that worked perfectly until I reinstalled Winxp, just to see that the 200gb hdd has become invisibile in My Computer but can be seen as hardware with all its stats and is operative. But there’s no way to access it. Is there a way to set that?
View 11 Replies View RelatedI'm having a problem with the screen saver not working on my IBM T21 WinXP SP2 No matter where I set the settings it will never kick in. It works when you test it but not otherwise. The monitor power settings are also not working. Any suggestions? I'm out of ideas.
View 6 Replies View RelatedIt had Windows vista in it and she had someone put Windows XP in it. It now has a virus and my friend wants Vista put back in it. I have a cd here that says TOSHIBA recovery and applications / drivers, Satellite A130/ A135 series, Windows Vista Home Basic 32-bit. I put this cd in the rom and restarted. it did nothing. just loaded XP up again.
View 5 Replies View RelatedI'm trying to get a new usb mouse to work on it, and I have the drivers for it - but when installing the 'new hardware', it reaches a point wherein it asks to insert the "Windows XP Home Edition CD-ROM", but I don't have one! It won't allow me to skip this, and if I click cancel, the mouse isn't installed, and an error window appears saying that an error occured during the new hardware's installation.
View 3 Replies View RelatedWhen I click on start - all programs, the list opens, but only three programs are there now. Set program access and defaults, Internet Explorer, and Windows media player.
All other program links are gone. This is very recent, and the only thing that has changed recently is the XP service pack 2 downloaded and installed. I am currently running McAffee 2004
I just bought this comp. I ' pretty sure it has a 20gig hard drive. I want to put in my old one with 80Gig
View 1 Replies View RelatedI just bought a new hard drive today (120 GB Fujistsu) for my laptop computer. I installed it, and I am now trying to boot Windows XP onto it with the CD-ROM. But for some reason, the CD is not booting up and my computer keeps saying "Operating System Not Found." I tried changing the boot order from the hard drive to the CD-Drive, but that didn't help either.
View 3 Replies View RelatedI've heard that when burning DVD ISO files to you HD, you need to have NTFS file system, is this true?I bought a new laptop running XP and it has FAT32 file structure. Is there any what to convert this to NTFS without loosing information and reformatting?
View 14 Replies View RelatedI get this error when i launch a setup file
<<16 Bit Windows Subsystem>> //Title\
<<C:WINDOWSSYSTEM32AUTOEXEC.NT.The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close to terminate the application'>> //Description\
and there is another button 'ignore'
<<>>
i tried both choices and neither of them worked
i think it's a compatibility issue but the problem is that i launched the same setup files b4 and they worked,,i have WINXP Pro SP2 and i think i've had this problem after i installed the SP2,,i right-clicked the setup file and i changed some of the compatibility options and it still doesn't work.
I have trouble getting it to stop. I'm running WinXP Pro SP2 on a Dell Optiplex. About 50% of the time, when I want to shut down, I get past the "Saving your settings" screen, to "Windows is shutting down". And that's as far as it goes. I then have to manually turn off the computer. It doesn't matter whether I've selected "Shut Down" or "Restart". The other 50% of the time it shuts down like it's supposed to.
View 6 Replies View RelatedI have a dell inspiron 6000, with a dvd drive. I've installed Roxio Easy media creator 8, evertyhing was perfect, until i insert a data disc, the computer became freezed! and the problem is with every disc, it looks like a conflict, because i leave the computer, for like 20 minutes, and when i came back, the computer was normal, and allow me to use it like nothing happened. I uninstalled the Roxio Software and the problem was solved,
View 2 Replies View RelatedSomehow I lost the ability to create new users. First I could create Administrators and Limited Users, then only Administrators, now even though I can create an Administrator User, it acts like a limited Limited User. I cannot modify anything with it.
View 4 Replies View Related