Cannot Ping Winxp Pc's
Sep 16, 2005
I cannot ping xp computers. I can ping win2k machines all day long. The xp boxes are running
sp2, but I have a policy in effect that disables the firewall. I also have a
policy in effect that renames the administrator and guest accounts. IF the
firewall is disabled is there any reason that any of these machines would
not respond to a ping request. Wouldn't be a big deal, but my print tracking
app requires it. All XP machines can communicate with the network just fine.
I can ping anything from each XP machine successfully.
View 6 Replies
ADVERTISEMENT
Jan 14, 2006
I am using a borrowed computer which has Windows XP installed. I am having difficulty getting a brand new game to load a saved file. I don't know where to look to do a scandisk on this OS.
View 6 Replies
View Related
Sep 9, 2010
When I opened up the case, the northbridge heatsink clip had snapped off. I put the case on it's side and reseated the heatsink, and put a case fan over it. I reformatted and installed winXP. The computer freezes a minute or so after entering windows. Also ran ubuntu linux off a usb stick and it would freeze after 5 or so minutes. Ran memtest and no errors after 9 hours, Speedfan s.m.a.r.t says the hard drive is fine. I booted into Safemode, and ran orthos small ffts cpu test, and no errors after an hour.
View 6 Replies
View Related
May 30, 2005
May I know what's WinXP's basic RAM? or how can I know how much RAM I have.
View 14 Replies
View Related
Oct 13, 2005
How do I block a single cookie in IE6? There is one particular one that I wish to block without blocking others.
View 1 Replies
View Related
Nov 15, 2007
I have a Gateway FX530XM desktop which came pre-loaded with Winxp mce. I believe that mce is the cause of a lot of problems I've been having so I want to install winxp pro as a second OS.I have created a new primary partition on my HD and set it as active then rebooted with the winxp pro cd in the drive.The cd gets read and I can see my HD access light blinking. The installer asks me for a cd with a qualifying OS because my winxp pro is an upgrade. I go through this and then the installer goes to the screen that says to select a partition to install to. The problem is that what is displayed is several lines saying there is no hard drive to install to. Quite strangely, if my external hard drives (LaCie or Seagate) are on, the installer sees them as partitions that I could install to. I can't use the external hd because I don't think I can boot to it. If I could boot to it I could probably copy the new install to my internal hard drive.
View 8 Replies
View Related
May 12, 2006
I have at home a desktop connected by dial up (snail version), and a laptop in the office, connected by DSL.If I want to update Win XP, or others programs (all licenced, don't worry), can I download on my laptop, save on a stick, and install on my desktop?
View 7 Replies
View Related
Jul 9, 2005
I have 2 maxtor (60gb pr master and 200gb pr slave) that worked perfectly until I reinstalled Winxp, just to see that the 200gb hdd has become invisibile in My Computer but can be seen as hardware with all its stats and is operative. But there’s no way to access it. Is there a way to set that?
View 11 Replies
View Related
Jun 25, 2006
I'm having a problem with the screen saver not working on my IBM T21 WinXP SP2 No matter where I set the settings it will never kick in. It works when you test it but not otherwise. The monitor power settings are also not working. Any suggestions? I'm out of ideas.
View 6 Replies
View Related
May 30, 2006
I'm trying to get a new usb mouse to work on it, and I have the drivers for it - but when installing the 'new hardware', it reaches a point wherein it asks to insert the "Windows XP Home Edition CD-ROM", but I don't have one! It won't allow me to skip this, and if I click cancel, the mouse isn't installed, and an error window appears saying that an error occured during the new hardware's installation.
View 3 Replies
View Related
Oct 29, 2004
When I click on start - all programs, the list opens, but only three programs are there now. Set program access and defaults, Internet Explorer, and Windows media player.
All other program links are gone. This is very recent, and the only thing that has changed recently is the XP service pack 2 downloaded and installed. I am currently running McAffee 2004
View 3 Replies
View Related
Dec 18, 2006
I just bought this comp. I ' pretty sure it has a 20gig hard drive. I want to put in my old one with 80Gig
View 1 Replies
View Related
Sep 7, 2007
I just bought a new hard drive today (120 GB Fujistsu) for my laptop computer. I installed it, and I am now trying to boot Windows XP onto it with the CD-ROM. But for some reason, the CD is not booting up and my computer keeps saying "Operating System Not Found." I tried changing the boot order from the hard drive to the CD-Drive, but that didn't help either.
View 3 Replies
View Related
Apr 14, 2005
I've heard that when burning DVD ISO files to you HD, you need to have NTFS file system, is this true?I bought a new laptop running XP and it has FAT32 file structure. Is there any what to convert this to NTFS without loosing information and reformatting?
View 14 Replies
View Related
Aug 30, 2010
I have a winxp and vista laptop. I am trying to connect both together using cross cable. I configured a static IP 192.168.0.1 and 192.168.0.2 respectively for each system. I have also made sure that they are on the same workgroup. Vista laptop can ping winxp laptop but winxp laptop cannot ping vista laptop.I tried using the same OS i.e winxp it work just fine.
View 4 Replies
View Related
Mar 11, 2005
I get this error when i launch a setup file
<<16 Bit Windows Subsystem>> //Title\
<<C:WINDOWSSYSTEM32AUTOEXEC.NT.The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close to terminate the application'>> //Description\
and there is another button 'ignore'
<<>>
i tried both choices and neither of them worked
i think it's a compatibility issue but the problem is that i launched the same setup files b4 and they worked,,i have WINXP Pro SP2 and i think i've had this problem after i installed the SP2,,i right-clicked the setup file and i changed some of the compatibility options and it still doesn't work.
View 3 Replies
View Related
Mar 2, 2008
I have trouble getting it to stop. I'm running WinXP Pro SP2 on a Dell Optiplex. About 50% of the time, when I want to shut down, I get past the "Saving your settings" screen, to "Windows is shutting down". And that's as far as it goes. I then have to manually turn off the computer. It doesn't matter whether I've selected "Shut Down" or "Restart". The other 50% of the time it shuts down like it's supposed to.
View 6 Replies
View Related
Dec 17, 2005
I have a dell inspiron 6000, with a dvd drive. I've installed Roxio Easy media creator 8, evertyhing was perfect, until i insert a data disc, the computer became freezed! and the problem is with every disc, it looks like a conflict, because i leave the computer, for like 20 minutes, and when i came back, the computer was normal, and allow me to use it like nothing happened. I uninstalled the Roxio Software and the problem was solved,
View 2 Replies
View Related
May 26, 2005
Somehow I lost the ability to create new users. First I could create Administrators and Limited Users, then only Administrators, now even though I can create an Administrator User, it acts like a limited Limited User. I cannot modify anything with it.
View 4 Replies
View Related
Oct 19, 2009
Last night I upgraded to Internet Explorer 7 from some old version (I use a different browser which is why my copy of IE was so out of date.) When I rebooted to complete the installation I got a BSOD that said IRQL_NOT_LESS_OR_EQUAL. Tried again. Same. Last known good configuration, same. Safe Mode, same. Everything I've tried, same. It's a Dell Inspiron 500m laptop running XP SP2. I'm 99.999% sure it's not a hardware problem.I can't find my XP CD and no one I know seems to have one either so a fix that doesn't require the disc would be ideal.
View 14 Replies
View Related
May 30, 2007
what this might mean and what I might can do to rectify it win32k.sys - Address BF8CE1CC base at BF800000, Datastamp45f013fs
View 3 Replies
View Related
May 25, 2008
I have Windows XP with SP2 formatted to NFTS. My Ghost program is Ghost 2003. I have been using this program for a number of years now with good results Ghosting the entire C Drive onto my slave drive that is formatted to FAT32. I now find that the slave is getting rather full and now need to Ghost the C Drive image onto and external hard drive.
View 3 Replies
View Related
Oct 19, 2007
I have set up an XP-Pro classic-file-sharing network and want the client computers to share folders on the "server" computer . I have arranged a number groups and placed users into the groups. Each user is a member of GROUP_nnn and also of USER(group). I have shared c:SHARED_ROOT to allow all groups to have full-control on SHARED_ROOT, but for some reason access is denied to the sub-folders SUBF_A , SUBF_B and SUBF_C. As ADMIN, I have set the permissions to allow each user full-control in these sub-folders but I still get "access is denied" when a user tries to navigate into one of the sub folders. I removed INHERIT from the SHARED_ROOT and from each of the sub-folders.
Do I have to "share" the subfolders? Should I allow INHERIT on the subfolders?
View 5 Replies
View Related
Sep 1, 2005
I recently purchased a 160 GB SimpleTech SimpleDrive (external-USB) for backup purposes. The enclosed software StorageSync (Pro) did a satisfactory job of backing up, although a little slow (1 hr - 40 min for 11.5 GB, no compression).
Neither the on-line manual or website gives information whether a restore is possible from a catastrophic-type incident of the O/S, requiring restoration from a bootup procedure. There's no instruction about preparing a "Recovery CD." I have Ghost 9.0; would this be more advisable to backup the image file; and would Ghost see the external HD from its Recovery CD?
View 8 Replies
View Related
Apr 2, 2005
As soon as it starts to run windows setup a blue screen appears and says:A problem has been detected and windows has been shut down to prevent damage to your computer.The problem seems to be caused by the following file setupdd.sys Page_fault_in_nonpaged_area This is the first time you have seen this stop error screen, restart you computer. If this screen appears again follow these steps. Check to make sure any new hardware or software is properly installed.
If problems continue, disable or remove any newly installed hardware or software disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select advance startup options, and then select safe modeTechnical Information: *** STOP: 0x00000050 (0xe1607088, 0x00000000, 0xfc44bf3e, ox00000001)
View 1 Replies
View Related
Aug 5, 2007
When i try to do the ping command in the cmd prompt, it says "'ping' is not recognized as an internal or external command, operable program or batch file."
View 14 Replies
View Related
Jan 7, 2006
Just how can you "ping"?
View 11 Replies
View Related
Nov 14, 2007
I have 4 pcs on a network. All with same static IP, and Gateway. Connected to 1 Hub. There is no internet connection.
Im having problems getting the pcs to speak to each other. Some PC's can ping anohter, but it wont work the other way fround (eg, pc a can ping pc b, but pc b can't ping pc a). Why?
they are all part of a network, have the same protocols and clients in Netowrking proertys. Firewalls are turned off.
View 2 Replies
View Related
Sep 22, 2009
I have this type of internet http://www.incomich.com in my pc and i am confuse cuase sometimes is fast and sometimes so slow ok wen the guy came and install the internet he came and install a big pole with antena in top of my house and he did a check on the computer inserting a PING number so i was wondering what is that for? (so i copy the number wen he was inserting it) so i did it last night it just show me this number and letters
doing ping to the number i have insert with 32 bytes
bytes=32 time=2ms TLL=63
bytes=32 time=3ms TLL=63
bytes=32 time=3ms TLL=63
bytes=32 time=3ms TLL=63
STADISTICAS
packages
SEND =4 RECIVE=4 LOST=0
APROXIMATE ROUND TRIP TIMES IN MILLISECOND
MINIMUM=2ms MAXIMUM=3ms MEDIUM =3ms
View 1 Replies
View Related
Mar 23, 2010
I use the TP link router(192.168.1.1) to connect two PC together and there is PPPoE in router
and connect to internet .
Both PC use cable connect to router.
The XP HOme PC get IP 192.168.1.11 .
The XP prod notebook get IP 192.168.1.10 .
Both network adpator use DHCP to get IP from router.
Both XP/PC bootup safe mode with networking .
There is no firewall/virus scanner startup .
Both PC can connect internet and web browse without problem.
I can ping from the notebook 192.168.1.10 to PC 192.168.1.11
But I cannot ping from the PC 192.168.1.11 to notebook 192.168.1.10.
Why I can ping one PC from one direction , but it is failure from another PC?
View 2 Replies
View Related
Jun 30, 2005
My Windows XP Professional SP2 computer connect to the internet ok
through Ethernet cable to my cable broadband modem. If I use the command
prompt to ping my modem or any other address it just hangs until I close it
down, I have also tried connecting the modem via USB with the same results.
Anyone got any ideas as to the cure for this problem. I also have McAfee
internet security suite installed and have run complete virus checks and
also run Adaware & Spybot S&D.
View 2 Replies
View Related
