trying to "Home Network" between Windows XP Media Center Edition service pack 3 & Windows Vista Home Premium. The Internet connection originates thru a DSL connection from "Westell" Modem to "D-Link" Ethernet Switch and is functioning on BOTH computers. The file sharing is ANOTHER story--The Vista OS "sees" & shares ALL the files/drives shared FROM XP--HOWEVER, the XP computer ONLY "sees" & shares "Public" & "User" Folders--when I try to access the C-Drive Folder (which I have set up to share like the others, I get the following message: "C is not accessible. You might not have permission to us e this network resource. Contact the administrator of the server to find out if you have access permissions."
I have turned off my Windows Firewall on Vista & have tried repeatedly to allow access to "everyone" regarding the C Drive on the Vista computer--and after a restart the same issue exists.
I have a winxp and vista laptop. I am trying to connect both together using cross cable. I configured a static IP 192.168.0.1 and 192.168.0.2 respectively for each system. I have also made sure that they are on the same workgroup. Vista laptop can ping winxp laptop but winxp laptop cannot ping vista laptop.I tried using the same OS i.e winxp it work just fine.
I'm trying to make a dual boot system Vista/XP with my HP Media Center purchased in 2007 with Vista pre-installed. Inside Vista I created the partition for XP (disk D and rebooted with the 'XP Pro SP2' inside. After selecting its correct partition for installing it copies all files on hard disk and it reboots in order to start its installation, upon rebooting and starting first time from hard disk, it says that there is an error in the system and stops. If I install only XP on the system it works correctly even though some newest hardware is not recognized. I had already made a dual boot two years ago with a 2007 XP Student Edition and it smoothly. If it is due to the XP version being too old that maybe cannot deal with the boot record created by Vista Or perhaps such an old XP cannot recognize a boot hard disk that is not C:? Is there a way to bypass this point (perhaps fixing the boot record) in order to continue correctly the installation? Thank you, Al
I originally had Vista Business edition on my laptop and decided to dual boot with XP. So far I created a partition on the same drive (C: ) as Vista and installed XP on it. how do I choose between Vista and XP when my computer boots up? When I turn on my computer it boots straight into XP and doesn't show that menu where it gives me a choice of which OS I want to boot
Is it possible to have a Vista based system and then load XP on the same system and switch between the two. I know mac's have something similar to this but i have an HP dv7 pavilion notebook with an AMD Turion x2 Dual-core mobile RM-70 2ghz processor, 4 gb of ram, ATI Radeon HD 3200 graphics chip set, and 156GB of free harddrive space
just ordered a new pc that is on its way pre loaded with WIN XP PRO SP2. It also come with a free VISTA BUSSINES upgrade. I want to set up a dual boot system when i get my VISTA disk. should i use partition magic and set up a new partition for vista or is there a better way of doing this
I initially started with XP and created a separate partition for Vista, installing Vista on the other partition, Vista sees the (XP) Earlier version of windows. When I choose XP, I get the following error: NTOSKRNL.EXE is missing or corrupt. If I repair the XP with fixmbr - I end up screwing up Vista. Then when I repair Vista, it end's screwing up XP
does ne1 know if vista can dual boot with xp no problems yet only wonderin cuz we are very close to vista, and i want it. i cannot use my dorm room internet with vista cuz of bs security shit.
I was dual booting XP and Vista but didn't want Vista anymore. So I got rid of Vista, and that's all said and done now. Problem is, the boot loader is still coming up telling me to choose between "Earlier Version of Windows" and "Windows Vista". How to I get rid of it without using Vista's boot manager?
I'm currently running Vista on a raid 0 array, and want to dual with XP. I have two partitions, one with vista and the other that I tried installing XP on. After it finishes the initial installation and restarts it says to press any key to boot from the CD. I wait without pressing anything and than it says that there was an error reading the disk. If I remember correctly, after it restarts it goes strait into windows setup. This happens every time I try restarting, but I can get back into vista by putting the hard drive to boot first. In vista I can see the other partition where XP was installed, and inside is just a folder titled WINDOWS and it seems like all the windows files are in there
It had Windows vista in it and she had someone put Windows XP in it. It now has a virus and my friend wants Vista put back in it. I have a cd here that says TOSHIBA recovery and applications / drivers, Satellite A130/ A135 series, Windows Vista Home Basic 32-bit. I put this cd in the rom and restarted. it did nothing. just loaded XP up again.
Trying to get printers networked for our computers. We have about 8 computers and 4 printers. I have a "cheat book" called XP for Dummies that I got the computers networked but tried to get the printers to work on 2 computers and kept getting this message that I had either put in the wrong printer name or the printer wasn't hooked up to the network.
I am trying to network two laptops together via Ethernet cable rather than through the wireless router, as I am trying to transfer large files quickly.I am using a Dell Inspirion 8100 and a Sony Vaio PCG-Z1A.I was able to connect the Vaio PCG-Z1A to a MacBook Pro via Ethernet cable just a couple of days ago, so I don't think that the problem is with the Vaio.When I plug the Dell into the router with the Ethernet cable, it automatically detects the connection and DHCP assigns an address. Thus, I can only assume that the Ethernet adapter is working fine. But when I plug the Dell directly into my Vaio with the Ethernet cable, the tray icon on the Dell says "Local Area Connection - A network cable is unplugged."
I just recently bought a D-Link DI-604 Wired Router and I hooked it up to one computer running Windows XP and one running Windows 98 I got the connection working and now I am trying to share files between the two computers.
I plan to use my notebook (roaming from room-to-room) on a WinXP Home Network with a desktop (the ICS host) in my bedroom.. I also will be using it with public hot spots when I travel. Given my planned usage do you recommend a Wi-Fi router Presumably my first step is to use the Network Setup Wizard to configure my desktop as the ICS host. Is this correct Also, if I use the Windows XP ICS software on my ICS host to share its DSL connection with my notebook, do I need the DSL software from my ISP installed on my notebook as well
Two XP Pro machines on a hard-wire network with SP2. The host computer (A) can see the shared files of the other machine (B), and the B machine can see the files for A. However, when I try to access A shared files from B, I get a message that I "might not have permissions." I'm the admin on both machines.
I have a gateway desktop running win 2000 pro spk 4 and a Dell laptop running win xp pro spk2, i have a wireless router that allow my desktop thru a wired to conect to the internet and the laptop also connect wireless, but i want to be able to access the files and folders from each other, what do i need to do in order to browse each other i tried to share both hds and also created in both of them same workgroup name but when i browse from one each i don't see the other one and viceversa.
First off I am a power user and there is rarely a problem I cannot fix, so you can probably reserve any Tier type fixes. Desktops all running Windows XP SP3 of them are HP Pavilions, mine is custom built with ASUS mobo I've been through 6 different routers of 3 different brands and styles, because it SEEMS like a router issue but it simply cannot be after that many replacements.
We have a network of computers running at work. 5 comps in total. All running XP Pro. They all connect to the network and internet through a net gear router. My net gear router has only 4 ports so i connected a netgear switch to one of the ports to extend it and allow another 2 connections. One of the computers would run a server application software, and the other computers would run the client application which would connect to the server thru the LAN. All was working fine, with no issues at all.
The problem: Recently we upgraded all of our computers to DELL. Optiplex 740's. Specs are nothing special:
OptiPlex 740MLK SF AMD X2 4800 (2.5Ghz 1MB 65W) E-Star : Energy E-Smart enable Memory : 1024MB (2x512MB) 667Mhz DDR2 Dual Channel NON-ECC Hard Drive : 160GB (7200Rpm) Serial ATAII 3Gb/s All running Windows XP PRO – Some have been updated fully, others no updates at all.
one of my client application stopped responding and was hanging.
This is what I have going on. My office PC is hooked up to a Linksys wired router, which is powered to the internet by a cable modem. I also have a belkin wireless access point plugged into the 2nd input to power my laptop (both run on winXP home). I want to be able to print to my printer from my laptop. I have tried to do the ADD PRINTER and when it searches all I get is the INTUIT INTERNAL PRINTER. I have turned sharing on for both the laptop and office PC. I should also add that I added the PC printer driver on my laptop, and still nothing.I was told to go to my computer then tools then to folder options then view and scroll to the bottom and click on file sharing, however this is not there.
I am a company supervisor I have created a "Staff Chart 2010" by using Microsoft Excel. The purpose is to facilitate all staff when applying theirs leave/Time off/course.My company computers all networked with every staff aloted with one PC to work.Now, I do not know how to put Chart 2010 on network so that everyone could make full use of it
connecting to a specific website and contacted my ISP as i was being blocked by someone and still am. I then installed a IP blocker and since have been able to connect. When i contacted the ISP they were getting me to do a heap of things with ipconfig netish ip reset and a few of ipconfig commands. Since ive done all these my home network hasnt been able to work. I have gone back into My Network and done the network wizard again and again I have also reinstalled another network card and still wont work. I have assigned IP address to all computers on the network. On all other computers you can see everyones computer with the exception of the host. The host computer cant been seen on the network and cant access any other computer as well. The internet wont work on any other computer either but the host internet works. i have another bootable HDD and booted from it and everything works fine.
XP Pro SP2. In Network Connections folder I had an icon for a dial-up connection (which I use), a LAN connection (for wired NIC), A Wireless connection (for built in wireless card), and a 1394 connection (firewire port that XP likes to list as a connection). The NIC, wireless, and 1394 I keep set to disabled when I'm not using them. I enabled the wireless card and set up ad-hoc connection to another laptop with built-in wireless, so I could transfer some files between the two.
After I was finished, I disabled the wireless connection again. My dial-up networking connection disappeared from the Network Connections folder, and it's shortcut icon on desktop disappeared. It still showed in IE Intenet Options, and I could dial-up from there, but when I did, no computer icons appear in the taskbar, leaving me no way to disconnect except by pulling the phone cord............
Is it possible to start networking once I've entered Safe Mode without it? I am using Windows XP Pro. Maybe there is a command or something to start the service?
I have two desktops and one wireless notebook running on win xp home OS on a home network using router. I recently bought a new notebook running xp-pro and I am unable to get it in the network to function with the other three. My main issue is that I have one printer which I use for all the pc's running on home they all print and are recognized on the network. I want to be able to use the new notebook that has xp pro installed so I can use the printer on the network.
I just got a new XP computer which I put on my home network. For some reason, I can't see it from another XP machine on the net nor can I see the other machine from the new one. I'm logged on under the same user name on both machines and both machines have sharing set up on their hard drives.
I have a work laptop I'm trying to share files to a home desktop. The laptop connects to the work network using a PD and domain name. Both systems run XP plus both systems can ping by IP addr and hostname. However, when I attempt to map a network drive via the laptop, I receive a login screen, but the laptop's domain name's prepended to the login id. How do I set up a workgroup on the laptop without loosing the domain info ?
I am having a terrible problem my cursor works for a short period of time then freezes. I reboot and it happens again. When I am in Safe Mode Networking it does not happen. So I do not believe it is my Hard Drive.
I recently got a few notifications of viruses on my computer. Along with it came a lot of adware pop-ups. I downloaded Kaspersky AV 7.0 from their site and am using it as a trial version. I had an older version of McAfee, but hadn't renewed and do not have up-to-date virus definitions. As the title reads, my computer will only work when I boot windows in safe mode with networking. When I try to boot it up regularly, it goes very slow at the log-in screen and then once I log in, there's only a black screen with the mouse pointer. I left it at that window for a few hours hoping it would eventually load. Not the case. Same thing happens when I boot in safe mode with the exception that ctrl+alt+del works and will bring up the Windows Task Manager and then I can run/terminate programs from there. But no start toolbar or icons or anything else. I have done several full scans and they come up with viruses every time.
