I'm trying to set a default view for Windows Explorer but everytime I make my changes Windows doesn't seem to save the settings. I would like Windows Explorer to open with the Explorer Bar on the left with Folder view as the default. I've tried saving the view under options but this doesn't seem to work. If I close Windows Explorer it just goes back to the default view before I made my changes. Also is there a way to have Windows Explorer default to a certain directory?
I have the option to 'open explorer window' in winzip checked so it opens an explorer window of the destination I unzip files to. Recently I noticed that stopped working. Then explorer crashed causing my start menu to disapear so I used ctrl-alt-dlt to open task manager and entered 'explorer' in the run box and clicked ok. Nothing happened. explorer did not reopen.I then figured out if I entered 'c:windowsexplorer.exe' in the run box explorer would then open.I'm guessing both these problems are related as it seems winzip is unable to to open explorer.Does anyone know how to fix this? I just recently scanned for virus' with 2 seperate scanners & and scanned for spyware with 2 separate programs and im clean & i only surf with firefox. So its not virus or spyware.
Under device manager/system in windows xp sp2 should it say that no drivers are installed? also shows these devices:direct meory access controller motherboard resources numeric data processor NVIDIA nforce PCI System Management seems like there should be some type of driver installed, I am just trying to figure out why I cant get internet explorer tools>options bar to work.
I recently had a problem on my computer where Internet explorer was not working and would'nt open, and no windows based functions that used the explorer interface would work... So i downloaded the IE7 install package on my other computer and burned to disk to install. everything was going along fine, and when prompted to restart to finsih the installation i did so..... that is when "it" hit the fan.
Was never able to restart after that. Normal boot shows the windows initial screen, but eventually just restarts, safe mode does the same thing whether it's with network, command line or plain safe mode. Last known good configuration does the same.Needed to use a file so decided to remove the HD and re-install to another PC. I did have access to the file in question but now I'd like to fix the problem. The other system uses AVG. I started a scan and it detected Cekar.d (A0003977.exe, wdfmgr.exe and initially ntldr.exe), Dropper.Inor (ntdetect.hta, A0003979.hta), PSW.Generic5.ABVW (ctfmona.exe), PSW.OnlineGames.AAFI (ctfmonb.exe), PSW.Generic5.AFYK (ctfmond.exe), PSW.OnlineGames.ZWT (LotusHlp.exe) and some others but for whatever reason the scan stopped. I restarted it and now the AV still finds most of the threats it was seeing before but not Cekar.d. in the ntldr.exe file.
i installed Windows Vista Ultimate on my C Drive. and then installed Xp SP2 on my D Drive, in that sequence. now when the window boots it doesn't show the booting options and directly boots into XP SP2. i can not boot into Vista now. is there anyway i can make OS choice menu available / boot into Vista.
Whenever I downloaded a picture, I tried to delete it, but it won't delete. When you right click it, the options are, "Preview, Edit, Print, Open With. Send To". You cannot copy, rename, remove, move it or anything. It has no file path.
This isn't my machine it belongs to my grandpa. It has XP SP2 on it. It loads just past cmos screen then reboots itself. no message or nothing. Try run windows normally doesn't work. Try run safe mode with network support NOPE.
my friend tried to reformat my computer but for some reason my f2 key doesnt work out of all the keys on my laptop. i still get blue screens every once in awhile all related to windows. is there any other way to reformat besides going through the f2 during reboot?
Going to START/Search button then adding parameters to close up search such as choosing "Case Sensitive" DOES NOT WORK. When I pressed Go for the search, all kinds of files popped up in the search such as Realization.doc, Capitalization.xls, anything that had the letters liz in it when I had typed in the "File and Folder" box Liz (Capital L lowercase iz) and then a space after the z. I have files named Liz(space).this and Liz(space). that, and that's what I was searching for. But files still appeared that had lowercase liz in the middle of a word like Capitalization. So what's the point of having a Case Sensitive box to check, when it doesn't work! Am I doing something wrong here?
Ctrl now opens the bookmarks side-bar in firefox when I try to ctrl + c to copy something it does in fact copy but it opens the bookmarks sidebar every time. Also I cannot ctrl alt delete to open taskmanager anymore.
Alright, my in laws are having a problem with their computer and they said that last weekend Windows XP (SP3) asked to reactivate so they did without a hitch. I've never had a computer ask to do that unless I changed some hardware (which they did not) but maybe it's just never happened to me! So last week (a couple of days after the reactivation) they said weird things started happening. For instance if you go to the start menu to active windows, it comes up with a blank screen, the Windows search function comes up with a green screen and the little dog but that's it, IE doesn't load unless you type in an address and I couldn't get any web page to load that uses Active X. I ran the Kaspersky online test with no problems found and I couldn't run the antivirus from Eset because it requires Active X. Windows media player also doesn't load, it just brings up a blank screen. My father in law was able to defrag the computer though. I didn't have much time to really play with it so I'm not 100% sure what else isn't working but I know Firefox, Utorrent and VLC work fine. Has anyone had a similar problem or know where I should start to fix this?
some hours ago, I tried to run regedit as usual by using "Start | Run", but it said:regedit.exe - Unable To Locate ComponentThis application has failed to start because clb.dll was not found. Re-installing the application may fix the problem. I checked my running processes as well as restarted the PC. clb.dll was located at SysWOW64 (being a 32-bit dll, obviously) but not at System32 (where only 64-bit-files are stored), copying it to System32 didn't change anything.After a while of searching the inet in vain I realized I hadn't tried to start regedit.exe or regedt32.exe in SysWOW64 (but regedt32.exe in System32, which gives the error), and surprisingly, it worked. Still the problem remains: I can't start it using "Run" anymore (which worked since 18.05.2005), and I didn't change anything big but uninstalled WindowBlinds (a windows skinning software which worked quite well for many months). Could WindowBlinds be the reason, and if so, how? Moreover, will I experience further problems?(msconfig still works normally and can be started by "Run"; often, this isn't possible when encountering the regedit clb.dll error).
A friend of mine has been given a computer without a keyboard. It works fine except WinXP doesn't find a keyboard when a normal PS/2 keyboard is connected. The keyboard is working fine when running DOS or BIOS setup. I tried reinstalling WinXP but the keyboard doesn't work after booting the XP cdrom.Now the computer says "Restarting XP installation" after booting from the hdd. But it doesn't complete the installation without an usable keyboard.
my system only has USB & a new USB2 device I recently bought automatically started to update the USB 2.0 system, now none of my input devices work in Windows XP.I've now read article 813139 & it says:"Note If you are using a USB keyboard and a mouse input device, Microsoft does not recommend that you update the USB 2.0 host controller driver by means of Device Manager. If you do this, the keyboard and mouse do not function, and you cannot control the system or safely restart the computer."
So, I have the same problem few seems to have here, my 2nd HDD doesn't show up. The problem came when I formated my main HDD and installed XP on it. After that I can't get the 2nd HDD working.First of all, it shows on BIOS, its connected with cables (tried several, thought if the cables were broken), shows on control panel, on system. But I can't see any drives, not a single one. It has worked correctly for over 5 years, which 4 of them has been with the main HDD and XP, the same thing I have now.The 2nd HDD is Samsung SV4002H, I have few pics to clear the problem.
i have recently downloaded boot editor and as it did not work the first time i uninstalled it, this was yesterday. Today i turned my pc on and the system speaker beeped and it didnt even show the first loadup screen that says energy at the top.
i just posted this and spell check thought teyh was ok, didn't offer up they. 2:15 isn't bad. you removed 2 checkmarks, how many still remain? what are teyh? i don't see any anti virus system in hjt. you need protection.
My OpticPro 9636T scanner parallel port scanner initially would not work under Windows XP Pro. Plustek does not support XP on this model. I finally found a driver from Germany. When installed with right mouse clicks, it installed in English, and worked perfectly. Since the MS automatic update to SP2, it no longer works, and the driver from Germany won't install.Does anyone know of a driver that will work?
My laptop works fine for wireless connection, but doesn't work for wired LAN's. There is no QoS Packet Scheduler in the Network Properties and if I click on Install it doesn't come up as an option. How do I find QoS or download it in order to install it?
I have a very specific issue here with user wallpapers. I have about 20 remote offices or so that are set up with a company wallpaper and we are using BGInfo so they can easily tell us the info we need to support them. Many computers are on sales floors and we need to keep them from changing the wallpaper for obvious reasons. I have tried the solutions of using a Group Policy, changing the registry keys, denying permission to registry keys, etc . . .
All of these solutions either have the problem that the user can still right click an image and set it as the background (IE, Firefox, Paint, Image Viewer), or it does not let BGInfo work correctly. I have spent a couple days searching forums everywhere and cannot find a a solution yet.
i have MSN (Windows Live Messenger Plus) and sometimes it doesn't work. i type in my username and password then it logs in. but it doesn't do anything. and then i have to close it with the task manager otherwise i can't do anything on my computer at all. can anyone help me with this? 2: my rightclick doesn't work. i don't think it's the mouse cause i'm very good in reparing mouses. sometimes my computer restarts when i'm in the middle of something, without me actually clicking restart.
Just installed XP and "Auto Complete" doesn't work as long as I'm logged-in as Administrator. As soon as I switch to "Guest" user, it's works fine. I've heard of this issue before and I've seen it appear on a number of search engines- just no appropriate fixes for it.
while using windows, i found that i am not able to drag and drop files. i can move them around, but when i place a file into another folder or location on my desktop or through explorer, the file doesn't move. it just bounces back to where it originated from.
Internet Options won't open in Windows Xp Pro Sp3 from Control Panel or anywhere else. I have checked SYSTEM32 and there is inetcpl (control panel extension file) and inetcplc.dll. I have tried opening Internet Options in Run, no luck. I have also run a VB script written by someone on the web to Remove Internet Restriction. Didn't work.Here is the error message I get when trying to open Internet Options from within Internet Explorer 8 (I usually use Firefox BTW, the latest, and this update was two days ago.
It doesn't mater if I use IE tools or control panel, when I click (internet options) it doesn't open. I'm running windows XP and I have not installed anything new. I have all the anti stuff, ( SuperAntiSpyware -Trend Micro - Advance System Care - Easy Cleaner) I've even turned them all off, but it still won't open.
When I go to my documents and open the folders, they always open in the list view. I would like to have them open all the time with thumbnail view.I change the view when the folders are open, but they always revert back to details when I go to them again. Can it be changed permanently?
