Device Driver Preventing The Machine From Entering Hibernation

Sep 12, 2009

I've tried deleting the hiberfil.sys file and looking everywhere I can think on the interwebs to find a solution, but have been unsuccessful.

When I try to hibernate, I get this:

The device driver for the 'WDC WD6400AACS-00G8B0' device is preventing the machine from entering hibernation. Please close all applications and try again. If the problem persists, you may need to update this driver. That's my boot drive. It's a Caviar green. From what I've read, it's rarely a driver problem, but caused by something indirectly.

View 11 Replies


ADVERTISEMENT

3D RAGE IIC AGP Device Preventing Machine From Entering Standby

Jan 16, 2010

I have windows XP SP2 PemtiumIII. The computer supports standby and hybirnate mode, but comes back with error message complaining about "3D RAGE IIC AGP device preventing the machine from entering Standby". What shall I do?

View 1 Replies View Related

Preventing Device Discovery At Boot

May 7, 2010

I have a Windows XP PC dedicated to a machine that is constantly sending data via a serial port to the PC. When we power up the system the PC will sometimes think that the serial data coming in is a "new device" and installs it as a serial mouse. When the boot process is complete the PC runs a program from the Startup folder. When this program tries to open the serial port it is blocked by the "serial mouse" it thinks is there.

We have tried many things to prevent this problem. Disabling the mouse in Device Manager works for a while but eventually XP decides there is something wrong and does things like disable the COM port. We have tried disabling the Plug N Play services using MSCONFIG. This does not seem to prevent the detection of the "serial mouse" on boot up. We have a fixed set of hardware and software for this system that will never change. So I'd like to just disable all (or serial) device discovery on boot up. How is this done on XP?

View 1 Replies View Related

Preventing "This USB Device Can Perform Faster" Popup

Aug 24, 2006

I have an older PC running XP Home that I know only has USB 1.1 ports.

How do I permanently stop the "This USB device can perform faster if you connect it to a Hi-Speed USB 2.0 port. For a list of available ports, click here." balloon pop-up whenever I plug in a USB 2.0 device? This reminder is starting to be as annoying as MS-Office's Clippy or the Windows Search Assistant dog.

View 5 Replies View Related

USB Device Driver Won't Install

May 19, 2005

I have a USB device (Motorola V3 phone) and when connected it the driver did not install properly (something like there was an error installing the device) and the only option was to close the device wizard (no back option) I tried this on all my USB ports. The problem now is that when I plug the phone into a USB nothing happens at all - it doesn't try and load a new driver and since the driver it installed before didn't work it doesn't use that.How can I remove all trace of the phone from the PC so that it will have another go at installing the driver (I used the CD that came with the phone before, but I have since got it to work on another PC by letting it search the web for a driver).

View 3 Replies View Related

PCI Device Driver Missing

Feb 11, 2006

After reformatting/reloading Win2K I have one yellow question mark in the device manager: Under "Other devices" it says "PCI device" has no driver. Doesn't have any details at all about the device. tried searching the original driver CD from Dell but it didn't find a driver there. Any ideas?

View 14 Replies View Related

USB Imaging Device Driver

Jan 9, 2006

My device manager lists my USB Imaging Device as unknown and has no Drivers attached to it, is there any download link for a driver I could install on it?

View 10 Replies View Related

Resetting Device Driver Might Be At Fault.

Apr 30, 2008

I was reading a string from 2007 on this site about a similar problem I'm having. My XP computer keeps resetting and after the computer restarts and an error report is sent I get a rather vague web page from Microsoft that a device driver might be at fault.

The string I mentioned reading involved a member here that seemed very knowledgeable and quite helpful, I think it was "The Hound" at any rate in reading the string The Hound recommended setting up the error process, for lack of a better term, to not automatically reboot so the message on the bluescreen could be read. I've done that but the system is stable for now.

View 7 Replies View Related

Code 39 Message In Device Driver

May 19, 2005

Windows XP. I have bought two keyboards, one USB, the other ps/2, but neither has changed a thing as far as eliminating the code 39 message I am getting when I go to device driver. There's also the exclamation point in yellow, that hasn't changed either. Things I have done include uninstalling and reinstalling, but since I can't do anything more than copy and paste, there isn't much I have been able to do as far as msconfig or safe mode. (I've tried to go to diagnostic mode via misconfig but it asks for an administrator password and I have learned passwords can't be copied and pasted).

View 1 Replies View Related

Audio Device Missing Driver

Jul 24, 2008

After going through many trials, tribulations, and attempts to fix my computer, i was left with only one option, to fully restore it back to factory settings. i thought this would cleanse all of my problems. now i have no sound. i have tried running services.msc and windows audio is correctly enabled. it is likely to be a missing sound driver, but i have no clue how to determine where i can get this said driver. i think it is important to note that it appears that none of my usb ports in the front or back of my computer are active.

View 7 Replies View Related

Device Driver For Hardware Code 39

Aug 4, 2005

I have HL-ST CD-RW GCE-8481 B and IDE-DVD Rom 16x I run windows xp home edition. A few days ago I had to do a system restore, but couldn't go back any farther than the month of July.. At any rate, both drives show up in Device Manager as well as my computer. They both light up, but nothing plays. I have unistalled both of them, windows finds new hardware, but the same error message is still there "windows cannot load the device driver for this hardware, the driver may be corrupted or missing code 39" I have read about going into the registry and I usualy get into alot of trouble with that. What I would like to do is a complete recovery using the hp recovery disks that I made when I got the HP. Windows came pre- installed with no disks other than the ones I created. My question if I do this will I be able to use the disks since nothing is playing in either of these drives? My computer is a Desktop , HP Pavillion model is 220N.

View 6 Replies View Related

Thread Stuck In Device Driver

Feb 21, 2006

I have been getting error message: stop 0X000000EA Thread Stuck in Device Drier (Q293078). I have tried disabling device drivers, but I can't seem to find the driver that is causing the problem. MS says it does not know what device driver and is looking into problem. Is there any software that can identify corrupt or bad device drivers?

View 7 Replies View Related

Mouse Freeze Constantly-no Driver Device?

Aug 22, 2005

I'm using windows xp home addition on a notebook from gateway with an HID Compliant mouse. It freezes constantly. No new driver device available.

View 4 Replies View Related

System Reboots - Device Driver Error ?

Sep 8, 2005

I have been getting BSOD for about 2 months now and always when i play a game especially bf2 and cod

after every BSOD it comes up device driver error but all drivers are fine,I have changed RAM,PSU and mobo after last time i was pulling my hair out and now its started doing it again after nearly 2 weeks

my system is as follows:

AMD A64 3200(winchester)skt 939

MSI neo 2 platinum NF3 ultra mobo

Giel pc 4000 ultra 2x512

Radeon X850 XT PE (agp)

View 14 Replies View Related

Cmd.exe Prompt - Virtual Device Driver Failed

Feb 9, 2008

Can't run programs from my cmd.exe or command.comI have to open my Command Prompt throughStart>All Programs>Accessories. When I type cmd or cmd.exe in Run it comes up with an error"cmd is not a valid Win32 application." If i type command into Run I get "C:WINDOWSsystem32command.comC:PROGRA~1SymantecS32EVNT.DLL. An installable Virtual Device Driver failed DLL initialization. Choose 'close' to terminate the application."| close | ignore |After it opens I still can't do much...I type:
notepadand I get an error:'notepad' is not recognized as an internal or external command,operable program or batch file. Same goes for all other .exe and programs that I try to open through cmd.

View 14 Replies View Related

Device Driver Caused The System Crash?

Apr 17, 2006

When trying to install farstone virtual drive on a computer it reboots during the driver installation phase. After the reboot at the desktop windows says new hardware found and asks to install it. It's the offending driver, fcdabios. Windows installs it and says it was installed successfully. Then the computer spontaneously reboots again. It seems to start alright back at the desktop but again reboots after 2 minutes. The only cure is to do a restore from a norton ghost image. I sent a debug file to farstone but haven't received a reply yet.

View 2 Replies View Related

Stop Error Caused By A Device Driver

Dec 14, 2005

I'm getting pretty frequent shutdowns with the below information. When the box re-boots, the message says device driver but never can point which device driver. Can anyone have a look at this and give me some advice?

View 7 Replies View Related

Ethernet Controller & Multimedia Device Details And Driver

Mar 26, 2010

I need to track down drivers for my Packard Bell Imedia 3082 XP Pro service pack 3 desktop. I have been to the packard bell support/drivers site and found 5 out of 7 missing drivers. I had tried the suggested site previously but when i clicked on download products i kept getting a "server not found message". Tried it yesterday again and it worked so thanks to the people who suggested that. Problem now is I am still missing my ethernet controller driver and my multimedia controller driver. I dont know the exact device details in order to download the two missing drivers. to tracking down the ethernet and multimedia controller. I have downloaded and installed the multimedia driver from the Pack Bell Imedia 3082 site but still it is yellow with exclamation mark. And i still cant connect to my Belkin router. So in brief: I need the device details to my ethernet controller and multimedia controller so that i can track down the drivers.

View 3 Replies View Related

Device Driver Error / Getting Blue Screen All The Time?

Dec 6, 2004

I just got a blue screen with the following information:STOP: 0x0000008E (0xC0000005, 0x805677C4, 0xEF8C7D40, 0x00000000)I'm currently running Windows File Protection...but I don't know if there is anything else I should do.

View 2 Replies View Related

BSOD Stop Error, Caused By Device Driver

Feb 2, 2007

I was informed today that our home computer has been freezing over the last day or so. I logged on and looked up some info on the error i was described, then perhaps fortunately, i got the vile BSOD. This is what was contained:Then it began a memory dump.It claims a device driver error, but i do not recall installing anything recently. the windows report proved less than helpful (surprise).

View 1 Replies View Related

Blue Screen Error Caused By Device / Driver

Oct 23, 2008

Blue screen error caused by a device or driver You received this message because a hardware device, its driver, or related software has caused a blue screen error. This type of error means the computer has shut down abruptly to protect itself from potential data corruption or loss. In this case, we were unable to detect the specific device or driver that caused the problem.

iam running windows xp....ive been having problems with my pc forever and i can never seem to work out if its bad ram or a memory issue. Anytime my pc is running for a long period of time it seems to hang and give me the blue screen, if i try to run a media program or burn a cd or anything along those lines it hangs also....What could this problem be? do i need to let someone look into my system or can it be resolved at all. Ive had every error msg i believe...it seems to always tell me its a device error when it hangs or when i reboot it gives me that msg and then reports the proble

View 14 Replies View Related

Blue Screen Comes During DSKCHK Due To Device Driver Problem

Dec 10, 2008

Im using windows xp home. And when im running a dskchk it stops and doesnt complete to 100%. when it gets to stage 5 it gets to 56% and restarts and I recently had major issue with blue screens. the message i got was a device or driver caused it but windows doesnt know which one and today my pc shut down and it kept looping to the start up and i had to use recovery console to fix it but im not sure it did.

View 9 Replies View Related

Error Message: Virtual Device Driver Failed Dll Initialization

May 16, 2006

When I want to install certain programs, there is a set of error messages that makes the installation fail.If I push "ignore" then this message appears:

"c:Windowssystem32autoexec.nt. The system file is not suitable for running ms-dos and microsoft windows applications. Choose 'close' to terminate the application." I have a feeling that this is caused by a Norton antivirus program I installed couple years ago that I had a heck of a time removing. Could there be a chance that some parts of the program is still lingering to cause this? I've been having this problem for the longest times and threw away a bunch of software.

View 3 Replies View Related

Reinstalled: No Audio Device Found / Driver Installation Failed?

Mar 20, 2008

I recently just re-installed windows xp on my hp pavilion laptop. When I attempted to install the sound driver off of hp site I receive an error message stating."Driver Installation Failed: Could not find the Media device for this driver."I have a basic understanding of operating systems. If you can please explain in detail. I don't know what other information to list. So if more is necessary I do my best to provide.

View 5 Replies View Related

Getting System32 Message / Virtual Device Driver Failed DLL Installation?

Jan 6, 2009

My son went to sign onto his computer and this is the message that came up Windows/system32/command.com C:/program~1/symantec/s32evnt1.dll. An installable Virtual Device Driver failed DLL installation. Choose close to terminate application

View 14 Replies View Related

Computer Restarts And Freezes - Device Driver Is Causing The Error?

Apr 20, 2006

This happens when I watch videos, or do anything that has to do with videos such as windows movie maker or use media player, anyways, I keep getting this page http://oca.microsoft.com/en/response...&SID=10.My question is, how do I find out which device driver is causing the error so I will stop getting to many unexpected restarts/freezes?

View 14 Replies View Related

Standby Mode Not Working - Microsoft Natural PS2 Keyboard Device Driver

Jan 5, 2006

Since installing Windows XP SP2 (upgrade from SP1) I noticed that Standby does not function. When I manually go to Standby, or if my laptop tries to go into Standby as per the power management settings I have set, I get the following message: "Standby has been prevented by the Standard 101/102-Key or Microsoft Natural PS/2 Keyboard device driver. You may need to install an updated driver."

Any ideas on what I can try. I have tried uninstalling the keyboard in safe mode and rebooting to reinstall the keyboard drivers. I have also checked my BIOS settings, and tried resetting the power management settings. I have even updated my ATI video adapter drivers. I noticed the problem shortly after installing SP2. There are no updated drivers available from Gateway for the keyboard.

View 2 Replies View Related

Remotely Accessed Machine's Data Can Be Copied To Local Machine?

Nov 20, 2009

Can I copy the data of remote desktop to my Local machine.

View 1 Replies View Related

Entering Certain Web Site Got White Screen?

Aug 28, 2007

How come when my daughter tries to log onto certain kids web sites she just gets a blank white screen? It appears as if the site is not loading. Do I need to load or install something?

View 7 Replies View Related

Cookie - I Was Blocked From Entering The Site

Oct 20, 2006

I did for a while activate the "prompt" alternative on Favorites/Tools/Internet Options/Privacy/Advanced to block unwanted cookies. Then I blocked cookies from a site that I usually visit, marking the "always." option. The result was that I was blocked from entering the site. I then reversed all of my previous actions, letting the browser deal automatically with cookies as it saw fit (greying out all the rest of the alternatives on that window), restarted the computer and returned to the site. But all I get is a pop-up saying "You must activate cookies on your browser", at various stages, sometimes after I give the password and all, sometimes as soon as the home window comes up. I repeated all the a/m actions several times, but with the same result. I have XP with SP2, IE6, Pentium d.
Any help will be appreciated - Amos.

View 9 Replies View Related

Computer Not Entering Into BIOS Setup?

Sep 27, 2010

my pc not go bios setup how to get into the bios?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved