Device Driver For Hardware Code 39
Aug 4, 2005
I have HL-ST CD-RW GCE-8481 B and IDE-DVD Rom 16x I run windows xp home edition. A few days ago I had to do a system restore, but couldn't go back any farther than the month of July.. At any rate, both drives show up in Device Manager as well as my computer. They both light up, but nothing plays. I have unistalled both of them, windows finds new hardware, but the same error message is still there "windows cannot load the device driver for this hardware, the driver may be corrupted or missing code 39" I have read about going into the registry and I usualy get into alot of trouble with that. What I would like to do is a complete recovery using the hp recovery disks that I made when I got the HP. Windows came pre- installed with no disks other than the ones I created. My question if I do this will I be able to use the disks since nothing is playing in either of these drives? My computer is a Desktop , HP Pavillion model is 220N.
View 6 Replies
ADVERTISEMENT
May 19, 2005
Windows XP. I have bought two keyboards, one USB, the other ps/2, but neither has changed a thing as far as eliminating the code 39 message I am getting when I go to device driver. There's also the exclamation point in yellow, that hasn't changed either. Things I have done include uninstalling and reinstalling, but since I can't do anything more than copy and paste, there isn't much I have been able to do as far as msconfig or safe mode. (I've tried to go to diagnostic mode via misconfig but it asks for an administrator password and I have learned passwords can't be copied and pasted).
View 1 Replies
View Related
Oct 1, 2005
I have an AMD 2.1 athlon, i try and re-install my C-MEDIA AC97 Audio Device, i dont have the CD and i dont know how to fix this
View 1 Replies
View Related
Jul 21, 2005
I've been using a Buslink 40G disk-to-go for about 2 years and love it. Today I plugged it into the USB port and the drive did not display. I've searched forums half the night since this drive contains financial data that hasn't been backed up for a month (yes, bad practice, I know) and I need to get it working. I've uninstalled, reinstalled, updated drivers, removed and reinstalled drivers, rolled back drivers and tried everything short of bios changes I've seen recommended.
View 1 Replies
View Related
Dec 13, 2004
Have some strange problem that nags me every so often. when i boot up the computer i will periodically get a bsod with "bugcode_usb_driver" listed as the cause. I suspect it may be from some webcam i had tried to install, though i thought i had deleted everything. The error only shows up every so often randomly, and then sometimes when i do certain things. For instance, I disabled startup item Navcpl which i believe is norton antivirus (which just came with the computer, im using another program). the computer would not boot up until i went in in safe mode and reenabled it. Yesterday I partitioned my hd using a linux program (though linux is not yet installed, just a cd boot), and since then windows keeps asking me to do run a disk check when i boot up. if i skip it i will boot up fine, but if i let it run, i will count down to about 2 seconds (from 10 that it gives you to skip) and then give me the bsod. very strange.unfortunately the problem had started a long time ago, so i cant do a system restore (i thought i had solved the problem a while ago, but like i said every so often i would get the error on boot, i had been keeping my computer on for long times and so i didnt notice it).googling and checking the forums have turned up nothing. i saw some solutions online and on microsofts site about the same driver error, but under different circumstances, nothing like the problem im having.
View 9 Replies
View Related
Aug 30, 2005
I am trying to get my usb flash drive to work, and I get this error message. Windows cannot use this hardware device because it has been prepared for "safe removal", but it has not been removed from the computer (Code 47). To fix this problem, unplug this device from your computer and then plug it in again.The only problem is, is that i don't have the device plugged in. I tried uninstalling the device and restarting, but there it is again at the start up. When I plug the device in, the computer will not read it.
View 2 Replies
View Related
Feb 23, 2008
I get the following message when I go to device manager and look at my cd rom drive, which has an ! on it."A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)"Recommended resolution The start type for this driver is set to disabled in the registry. Uninstall the driver, and then click Scan for hardware changes to reinstall or upgrade the driver.On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard. If the driver is required, and if reinstalling or upgrading does not work, change the start type in the registry using Registry Editor. For more information, see the Registry Reference in the Microsoft Windows 2000 Server Resource Kit I have done extensive research on this and all the work arounds that have been suggested do not work for me. The only course of action I feel is possible for me is to edit the registry. I have not been able to find any directions on how to do this short of buying microsoft's "Windows 2000 Server Resource Kit" which is suggested in all my research. This book is Hugely expensive.
View 6 Replies
View Related
Dec 15, 2004
My computer no longer recognizes my cd drive or even brand new dvd drive. It says it has sucessfully loaded the device driver but cannot find the hardware device, code 41. I have tried the troubleshooter, updating the driver, checking the conections, uninstalling / reinstalling the device. Bought a new DVD drive (good enough reason) but it has the exact same message. Any ideas on what else I could try before having to pay the boffins to have a look?
View 10 Replies
View Related
Jul 14, 2005
Every so often, when I start my computer, the graphics controller does not register correctly and my computer loads some default monitor controller and gives this error that's in the Subject heading. The font turns huge and annoying. I've reloaded, updated, deleted, changed, etc. to the graphics controller. Nothing cures it, except, I was able to do a restore and get it to load correctly. Sometimes it would take a couple of times to do this. Right now, it's on it's 5th time and I'm getting annoyed. It's not working. Does anyone know what I'm talking about?
View 3 Replies
View Related
Apr 27, 2010
I have been receiving a bsod error lately it says BUG_CODE_USB_DRIVER I Have Done Lots Of Searches On Google But Nothing Has Helped Me Out So I Am Asking My Self. Here Are Some Pics Of My Error Report.
View 7 Replies
View Related
Sep 28, 2005
my computer with xp was running fine until i found that it was not showing my cd drive. I've checked the neccesary connection and they were all fine. the device manager shows the drive with a yellow sign giving error code 39 which says that driver is corrupt or missing. now my cd drive is a plug and play and does not have any driver bundled with it. uninstalling and reinstaling the drive wont help. xp detect the new hardware at the start up but again same problem.i wanted to reinstall xp but since cd drive is not available i tried to run it from hard disk. but it too was not running.
View 9 Replies
View Related
Jan 29, 2008
I couldn't get drivers for my other keyboard so I bought a new one. The manual said to plug the keyboard then install drivers. I did that then restarted the computer. This is my keyboard: The error I got was: Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)
Click Troubleshoot to start the troubleshooter for this device.
Drivers:
Driver Provider: Micro Innovations
Driver Date: 3/15/2007
Driver Version: 7.1.0.315
Digital Signer: Not digitally signed
View 10 Replies
View Related
May 19, 2005
I have a USB device (Motorola V3 phone) and when connected it the driver did not install properly (something like there was an error installing the device) and the only option was to close the device wizard (no back option) I tried this on all my USB ports. The problem now is that when I plug the phone into a USB nothing happens at all - it doesn't try and load a new driver and since the driver it installed before didn't work it doesn't use that.How can I remove all trace of the phone from the PC so that it will have another go at installing the driver (I used the CD that came with the phone before, but I have since got it to work on another PC by letting it search the web for a driver).
View 3 Replies
View Related
Feb 11, 2006
After reformatting/reloading Win2K I have one yellow question mark in the device manager: Under "Other devices" it says "PCI device" has no driver. Doesn't have any details at all about the device. tried searching the original driver CD from Dell but it didn't find a driver there. Any ideas?
View 14 Replies
View Related
Jan 9, 2006
My device manager lists my USB Imaging Device as unknown and has no Drivers attached to it, is there any download link for a driver I could install on it?
View 10 Replies
View Related
Apr 30, 2008
I was reading a string from 2007 on this site about a similar problem I'm having. My XP computer keeps resetting and after the computer restarts and an error report is sent I get a rather vague web page from Microsoft that a device driver might be at fault.
The string I mentioned reading involved a member here that seemed very knowledgeable and quite helpful, I think it was "The Hound" at any rate in reading the string The Hound recommended setting up the error process, for lack of a better term, to not automatically reboot so the message on the bluescreen could be read. I've done that but the system is stable for now.
View 7 Replies
View Related
Jul 24, 2008
After going through many trials, tribulations, and attempts to fix my computer, i was left with only one option, to fully restore it back to factory settings. i thought this would cleanse all of my problems. now i have no sound. i have tried running services.msc and windows audio is correctly enabled. it is likely to be a missing sound driver, but i have no clue how to determine where i can get this said driver. i think it is important to note that it appears that none of my usb ports in the front or back of my computer are active.
View 7 Replies
View Related
Feb 21, 2006
I have been getting error message: stop 0X000000EA Thread Stuck in Device Drier (Q293078). I have tried disabling device drivers, but I can't seem to find the driver that is causing the problem. MS says it does not know what device driver and is looking into problem. Is there any software that can identify corrupt or bad device drivers?
View 7 Replies
View Related
Aug 22, 2005
I'm using windows xp home addition on a notebook from gateway with an HID Compliant mouse. It freezes constantly. No new driver device available.
View 4 Replies
View Related
Sep 8, 2005
I have been getting BSOD for about 2 months now and always when i play a game especially bf2 and cod
after every BSOD it comes up device driver error but all drivers are fine,I have changed RAM,PSU and mobo after last time i was pulling my hair out and now its started doing it again after nearly 2 weeks
my system is as follows:
AMD A64 3200(winchester)skt 939
MSI neo 2 platinum NF3 ultra mobo
Giel pc 4000 ultra 2x512
Radeon X850 XT PE (agp)
View 14 Replies
View Related
Feb 9, 2008
Can't run programs from my cmd.exe or command.comI have to open my Command Prompt throughStart>All Programs>Accessories. When I type cmd or cmd.exe in Run it comes up with an error"cmd is not a valid Win32 application." If i type command into Run I get "C:WINDOWSsystem32command.comC:PROGRA~1SymantecS32EVNT.DLL. An installable Virtual Device Driver failed DLL initialization. Choose 'close' to terminate the application."| close | ignore |After it opens I still can't do much...I type:
notepadand I get an error:'notepad' is not recognized as an internal or external command,operable program or batch file. Same goes for all other .exe and programs that I try to open through cmd.
View 14 Replies
View Related
Apr 17, 2006
When trying to install farstone virtual drive on a computer it reboots during the driver installation phase. After the reboot at the desktop windows says new hardware found and asks to install it. It's the offending driver, fcdabios. Windows installs it and says it was installed successfully. Then the computer spontaneously reboots again. It seems to start alright back at the desktop but again reboots after 2 minutes. The only cure is to do a restore from a norton ghost image. I sent a debug file to farstone but haven't received a reply yet.
View 2 Replies
View Related
Dec 14, 2005
I'm getting pretty frequent shutdowns with the below information. When the box re-boots, the message says device driver but never can point which device driver. Can anyone have a look at this and give me some advice?
View 7 Replies
View Related
Mar 26, 2010
I need to track down drivers for my Packard Bell Imedia 3082 XP Pro service pack 3 desktop. I have been to the packard bell support/drivers site and found 5 out of 7 missing drivers. I had tried the suggested site previously but when i clicked on download products i kept getting a "server not found message". Tried it yesterday again and it worked so thanks to the people who suggested that. Problem now is I am still missing my ethernet controller driver and my multimedia controller driver. I dont know the exact device details in order to download the two missing drivers. to tracking down the ethernet and multimedia controller. I have downloaded and installed the multimedia driver from the Pack Bell Imedia 3082 site but still it is yellow with exclamation mark. And i still cant connect to my Belkin router. So in brief: I need the device details to my ethernet controller and multimedia controller so that i can track down the drivers.
View 3 Replies
View Related
Sep 12, 2009
I've tried deleting the hiberfil.sys file and looking everywhere I can think on the interwebs to find a solution, but have been unsuccessful.
When I try to hibernate, I get this:
The device driver for the 'WDC WD6400AACS-00G8B0' device is preventing the machine from entering hibernation. Please close all applications and try again. If the problem persists, you may need to update this driver. That's my boot drive. It's a Caviar green. From what I've read, it's rarely a driver problem, but caused by something indirectly.
View 11 Replies
View Related
Dec 6, 2004
I just got a blue screen with the following information:STOP: 0x0000008E (0xC0000005, 0x805677C4, 0xEF8C7D40, 0x00000000)I'm currently running Windows File Protection...but I don't know if there is anything else I should do.
View 2 Replies
View Related
Feb 2, 2007
I was informed today that our home computer has been freezing over the last day or so. I logged on and looked up some info on the error i was described, then perhaps fortunately, i got the vile BSOD. This is what was contained:Then it began a memory dump.It claims a device driver error, but i do not recall installing anything recently. the windows report proved less than helpful (surprise).
View 1 Replies
View Related
Oct 23, 2008
Blue screen error caused by a device or driver You received this message because a hardware device, its driver, or related software has caused a blue screen error. This type of error means the computer has shut down abruptly to protect itself from potential data corruption or loss. In this case, we were unable to detect the specific device or driver that caused the problem.
iam running windows xp....ive been having problems with my pc forever and i can never seem to work out if its bad ram or a memory issue. Anytime my pc is running for a long period of time it seems to hang and give me the blue screen, if i try to run a media program or burn a cd or anything along those lines it hangs also....What could this problem be? do i need to let someone look into my system or can it be resolved at all. Ive had every error msg i believe...it seems to always tell me its a device error when it hangs or when i reboot it gives me that msg and then reports the proble
View 14 Replies
View Related
Dec 10, 2008
Im using windows xp home. And when im running a dskchk it stops and doesnt complete to 100%. when it gets to stage 5 it gets to 56% and restarts and I recently had major issue with blue screens. the message i got was a device or driver caused it but windows doesnt know which one and today my pc shut down and it kept looping to the start up and i had to use recovery console to fix it but im not sure it did.
View 9 Replies
View Related
May 16, 2006
When I want to install certain programs, there is a set of error messages that makes the installation fail.If I push "ignore" then this message appears:
"c:Windowssystem32autoexec.nt. The system file is not suitable for running ms-dos and microsoft windows applications. Choose 'close' to terminate the application." I have a feeling that this is caused by a Norton antivirus program I installed couple years ago that I had a heck of a time removing. Could there be a chance that some parts of the program is still lingering to cause this? I've been having this problem for the longest times and threw away a bunch of software.
View 3 Replies
View Related
Mar 20, 2008
I recently just re-installed windows xp on my hp pavilion laptop. When I attempted to install the sound driver off of hp site I receive an error message stating."Driver Installation Failed: Could not find the Media device for this driver."I have a basic understanding of operating systems. If you can please explain in detail. I don't know what other information to list. So if more is necessary I do my best to provide.
View 5 Replies
View Related
