Device Manager Error Code 32
Feb 23, 2008
I get the following message when I go to device manager and look at my cd rom drive, which has an ! on it."A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)"Recommended resolution The start type for this driver is set to disabled in the registry. Uninstall the driver, and then click Scan for hardware changes to reinstall or upgrade the driver.On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard. If the driver is required, and if reinstalling or upgrading does not work, change the start type in the registry using Registry Editor. For more information, see the Registry Reference in the Microsoft Windows 2000 Server Resource Kit I have done extensive research on this and all the work arounds that have been suggested do not work for me. The only course of action I feel is possible for me is to edit the registry. I have not been able to find any directions on how to do this short of buying microsoft's "Windows 2000 Server Resource Kit" which is suggested in all my research. This book is Hugely expensive.
View 6 Replies
ADVERTISEMENT
Aug 30, 2005
I am trying to get my usb flash drive to work, and I get this error message. Windows cannot use this hardware device because it has been prepared for "safe removal", but it has not been removed from the computer (Code 47). To fix this problem, unplug this device from your computer and then plug it in again.The only problem is, is that i don't have the device plugged in. I tried uninstalling the device and restarting, but there it is again at the start up. When I plug the device in, the computer will not read it.
View 2 Replies
View Related
May 1, 2005
Every time i try to access the the device manager from the system properties,i get and error.[IMG][/IMG] then i get this window [IMG][/IMG].
View 4 Replies
View Related
Jun 14, 2005
I ran across this in my device manager and I am not sure what Fips.sys is for. I tried to update driver.....no luck. I also tried to uninstall and reinstall no luck.
View 2 Replies
View Related
Aug 12, 2008
I hope somebody can help me, please excuse my lack of pc skills!I am getting BSODs every day, usually 2 or 3 when booting up pc then pc runs fine for rest of the day. BSODs have varied but typically (but not always) IRQL_NOT_LESS_OR_EQUAL with STOP: 0x0000008E or STOP: 0x0000000A. Also, in Device Manager, Ports, Communications Port (COM2) I have a yellow exclamation mark, Code 10 error.I am not sure if these issues are linked.I know it could be a Ram issue but I have run memtest86 with no errors reported.Besides I am reluctant to replace the Ram or motherboard as I wouldn't really know what I was doing.
View 8 Replies
View Related
Jul 22, 2005
My friend just installed XP on his computer using the CD and now, ironically, XP doesn't detect the CD-Rom drive on the system. No CD-Rom drive in either Device Manager, Windows Explorer, or My Computer. The Add Hardware Wizard doesn't detect a CD-rom drive either. All the cables are intact as well. What could be wrong or do I need to provide more specific information on his system?
View 2 Replies
View Related
Jun 11, 2006
Just re-installed xp.In device manager the yellow exclamation mark is beside the mass storage controller icon.
View 3 Replies
View Related
Oct 1, 2005
I have an AMD 2.1 athlon, i try and re-install my C-MEDIA AC97 Audio Device, i dont have the CD and i dont know how to fix this
View 1 Replies
View Related
Jul 21, 2005
I've been using a Buslink 40G disk-to-go for about 2 years and love it. Today I plugged it into the USB port and the drive did not display. I've searched forums half the night since this drive contains financial data that hasn't been backed up for a month (yes, bad practice, I know) and I need to get it working. I've uninstalled, reinstalled, updated drivers, removed and reinstalled drivers, rolled back drivers and tried everything short of bios changes I've seen recommended.
View 1 Replies
View Related
Jul 15, 2005
I have installed a targus 7 port powered USB HUB on my computer. Device manager reports unknown device. I have deleted and it restalled the drived after the system rebooted. Device manager still saying unknown device. Their is not driver needed according to the manufacture. When the PC is booting it does see the IPOD mini and the Flash drive. But once the PC is fully out and login and I look a the device manager is still reporting unlnown device error (code 10).
View 1 Replies
View Related
Aug 4, 2010
I had some trouble last night and today with getting rid of a virus. Now that it is gone, I am having sound problems (maybe related, maybe not). This morning, when I opened iTunes I got a message that there was no audio device detected. After trying several things, I rebooted. Magically, I could play music again. However, a short while later, I again got an error message telling me that there is no audio device found, even though it shows up in Device Manager as working properly. The problem goes away for a short time after I reboot, but returns. It is Realtek AC 97. Why won't my computer keep recognizing it? (It tried going to Realtek's site to download an update. It has updates for Windows 98, 95, etc., but not for XP. Or at least I couldn't find it.)
View 6 Replies
View Related
May 12, 2010
Running Windows XP on Emachines ET1161-07. Installed all drivers that I could find, since EMachines does not represent XP. Tried Realtek audio and HD audio, tried Intel, didn't work. Tried NVidia, as it has an NVidia motherboard. Spent too much time on this computer. Can anyone lend a hand? I know it's got something to do with Audio, as there's no audio device detected in Sounds, under Control Panel.Customer has to have computer today.
View 10 Replies
View Related
Dec 17, 2005
I gotta a XP Home SP2 Machine was running fine then on boot up sound device not found. went to device mng and no items displayed. System restore had been didabled and Norton disabled as well. Done a spyware scan pull nout so did virus
View 3 Replies
View Related
Aug 31, 2005
I had this problem last time when I fresh installed Windows XP Pro on my computer. I don't know the time, but it happens at least 30 days after I reinstall the OS and software. Today, my computer prompted me to install drivers for a PCI Input Device, but I haven't installed any new hardware for months. Basically, I haven't touched the inside of my computer for that long. So why is Device Manager prompting me to install this mystery device? Hardware ID shows that it is from vendor 1102, which is Creative, and I have an Audigy 1. Also, my FireWire port is Code 10, the device cannot start. So I'm thinking the mystery device is the same firewire port. But why show up as a separate device? I tried removing the devices and restarting the computer, but they return to haunt me again. The device properties for the PCI Input Device says PCI SLOT 7, AND I DONT HAVE A 7th slot! Can someone help me, please? Device manager shows my 1394 Net Adapter with a yellow exclamation, and it has code 10, device cannot start. There is an unknown device, the PCI Input Device, which doesn't allow me to install any drivers for it, yet it has the creative Vendor ID 1102. It shows itself as being PCI Slot 7.
View 3 Replies
View Related
Dec 8, 2004
I have a feeling that this is simply a case of some registry settings which need adding/modifying/deleting but exactly which ones and what values I do not know. No, I haven't tried re-installing XP.
View 3 Replies
View Related
May 19, 2005
Windows XP. I have bought two keyboards, one USB, the other ps/2, but neither has changed a thing as far as eliminating the code 39 message I am getting when I go to device driver. There's also the exclamation point in yellow, that hasn't changed either. Things I have done include uninstalling and reinstalling, but since I can't do anything more than copy and paste, there isn't much I have been able to do as far as msconfig or safe mode. (I've tried to go to diagnostic mode via misconfig but it asks for an administrator password and I have learned passwords can't be copied and pasted).
View 1 Replies
View Related
Aug 4, 2005
I have HL-ST CD-RW GCE-8481 B and IDE-DVD Rom 16x I run windows xp home edition. A few days ago I had to do a system restore, but couldn't go back any farther than the month of July.. At any rate, both drives show up in Device Manager as well as my computer. They both light up, but nothing plays. I have unistalled both of them, windows finds new hardware, but the same error message is still there "windows cannot load the device driver for this hardware, the driver may be corrupted or missing code 39" I have read about going into the registry and I usualy get into alot of trouble with that. What I would like to do is a complete recovery using the hp recovery disks that I made when I got the HP. Windows came pre- installed with no disks other than the ones I created. My question if I do this will I be able to use the disks since nothing is playing in either of these drives? My computer is a Desktop , HP Pavillion model is 220N.
View 6 Replies
View Related
Dec 15, 2004
My computer no longer recognizes my cd drive or even brand new dvd drive. It says it has sucessfully loaded the device driver but cannot find the hardware device, code 41. I have tried the troubleshooter, updating the driver, checking the conections, uninstalling / reinstalling the device. Bought a new DVD drive (good enough reason) but it has the exact same message. Any ideas on what else I could try before having to pay the boffins to have a look?
View 10 Replies
View Related
Aug 30, 2005
A friend of mine has a 4 yr. old PC running XP Home with 128Mb of memory. He's had problems with programs aborting recently. I tried to run Device Manager to make sure there were no issues there. It briefly brought the screen up, then it went away. The same thing happened to Task Manager when I tried to see what was running and how much memory was being used. Anybody ever see this behavior before? I might try installing a memory cleaner pgm (ie. Memturbo), but I'm not sure I would even be able to get it to run. The hard drive amd memory seem to have no errors.
View 4 Replies
View Related
Mar 11, 2006
Last night I installed ATiTool 0.24 over my 0.25 version (stupidly). I also did a BIOS update and installed Cat6.3 and then AVIVO converter. When I rebooted, I had this new PCI device requiring a driver,but it's an unknown device and doing an auto update helped me.I can't get rid of this pesky PCI device (tried uninstalling but Windows detects it again after restart/boot-up). All my stuff is working, so I don't know where this critter came from?
View 1 Replies
View Related
Dec 24, 2007
I have a huge problem with two unknown devices in my "Device Manager" after formating and reinstalling fresh copy of Win Xp Pro.In my "Device Manager" there is two lines with Unknown devices.
View 10 Replies
View Related
Jun 20, 2008
I'm using XP SP3 Home Gateway desktop My device Manager has nothing in it. I don't know when it quit showing. I have checked Bios plug&Play, and it is set in Auto. I am also getting an error stating my recovery D: is running out of disk space.
View 2 Replies
View Related
Dec 28, 2007
My computer cannot detect any cd's in my DVD or CD drive. When I open Device Manager the CD/DVD devices have an error. This error: Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41) Click Troubleshoot to start the troubleshooter for this device.When I run the DriverScan it simply doesn't even have an entry for the drives, probably since it thinks it doesn't even exist at the moment.
View 5 Replies
View Related
Aug 3, 2005
Anyone know how I can rename a device in device manager, (or the registry), so it doesn't show #2 after the device.I used the leadtek driver uninstall tool last night. And it removed the drivers I had for this Leadtek Deluxe tuner alright.BUT it also renamed my onboard Gigabit LAN (onboard) to #2 my scanner to #2,
and removed my Nvidia drivers for the video card.And reverted the videocard drivers to MS Nvidia drivers.I managed to fix the scanner entry by uninstalling the drivers, then rebooting and reinstalling the drivers.And I managed to fix the videocard drivers, by reinstalling the Nvidia drivers.So, yup, anyone have any idea how I can change the board LAN, so it doesnt have #2 after it? sing XP Pro SP2
View 3 Replies
View Related
Jul 14, 2005
Every so often, when I start my computer, the graphics controller does not register correctly and my computer loads some default monitor controller and gives this error that's in the Subject heading. The font turns huge and annoying. I've reloaded, updated, deleted, changed, etc. to the graphics controller. Nothing cures it, except, I was able to do a restore and get it to load correctly. Sometimes it would take a couple of times to do this. Right now, it's on it's 5th time and I'm getting annoyed. It's not working. Does anyone know what I'm talking about?
View 3 Replies
View Related
Jan 29, 2008
I couldn't get drivers for my other keyboard so I bought a new one. The manual said to plug the keyboard then install drivers. I did that then restarted the computer. This is my keyboard: The error I got was: Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)
Click Troubleshoot to start the troubleshooter for this device.
Drivers:
Driver Provider: Micro Innovations
Driver Date: 3/15/2007
Driver Version: 7.1.0.315
Digital Signer: Not digitally signed
View 10 Replies
View Related
Apr 4, 2007
My device manager is gone! This is a friends computer(all computer specs given are for the computer I am speaking of in this post), so I am not aware of any changes they may have made and I also don't know how long it has been gone. When I go into my control panel / system / hardware / device manager It brings up an internet explorer screen that says the following:I also tried running a Windows search for "Device Manager" and it came back blank. Does anyone have any ideas how a device manager can disappear? I found other posts about Device Managers being empty but no problems quite like mine.
View 6 Replies
View Related
Apr 8, 2008
It opens but there is nothing is in the box. Is there a SFC program for XP that might restore it, or other options?
View 6 Replies
View Related
Dec 16, 2007
There is an article in this month's PC World "Fast Windows Fixes". The first of the fixes suggests that computer performance can be slowed because drivers for devices you no longer have are still being loaded. It provides a way to ensure that Device Manager also lists drivers for devices that are not currently connected, so I set it to do that.I found no device drivers loaded for anything not connected to my system, but DID find what appears to be a strange situation. Under Processors, my CPU is listed TWO times. The properties for both are identical. It looks like one should be deleted (I only have one CPU on the mobo, an Intel P4 Prescott running at 3.0GHz). But this is the MOTHER OF ALL DEVICES on a computer, so before I delete one of the entries, I want to check to see if it's supposed to have two entries. Can I delete one or should both be there?
I think this may have happened because about 10 days ago, I did a FULL reformat on my HD and reinstalled Windows and all 85 updates since the creation of my Windows CD. I also loaded drivers from other CD's that came with the PC, like my Marvell Ethernet card, Soundmax onboard audio, etc., AND the Asus CD containing the Intel 875/865 chipset drivers. I'm wondering if well before I loaded the latter, that Windows already loaded those drivers and the CD loaded them again. BTW, the driver dates in each entry for the CPU in Device Manager is 4/1/04.
View 4 Replies
View Related
Feb 14, 2006
Does anybody knwo how to get to Device Manager in XP.
View 14 Replies
View Related
Sep 5, 2005
How can I put the shortcut to Device Manager (not System) on the desktop?
View 1 Replies
View Related
