I'm repairing a computer for someone, his problem with the computer is that it continuous reboot.It would boot up to the xp logo then reboots again.I try to reboot into safe mode but it reboots at the same point so I can't unchecked the "auto restart" at the my computer's properties and give you guys a log file to see.
View 5 RepliesI am trying to help a friend with his computer and I love to learn stuff so this is still kind of fun... but it is getting old.When the computer is turned on we get the Window's splash page, then the compaq splash page, then a text screen with "Safe Mode, Safe Mode with Networking... etc" I have tried all the options, none of them work.I have used F10 to get into the system utilities to try to boot off the CD. I cannot find an option to make the CD boot first, only the option to enable of disable the different IDE devices. I have played with all those options and nothing works. I have even disconnected all the IDE devices except the CD drive and tried to get it to boot like that.
View 1 Replies View RelatedI got an old, free system from work with no manual, etc
1) I am curious if this board came with an onboard graphics system. Under device manager, I only show Viper V330 under display adaptors.
2) 2 separate 64 MB strips are installed and I did a barclay advisor profile. It shows that I have these two strips installed, but under 'my computer' it shows only 135,010 kb of RAM
very quick question here. I was recently updating one of my laptops with drivers and wmp11 and things of that sort. I guess I made the mistake of installing a version of SP3 that was not final and now it keeps rebooting. It goes past the Windows boot screen and restarts itself. It is very frustrating. I have tried safe mode - same deal. I have no tried the last know good configuration - failed. I am almost 95 percent sure it was the SP3. My question is, is there a way to do something like a system restore or maybe even uninstall Sp3. Of course I can not even get into Windows
View 1 Replies View RelatedAfter downloading the most recent firewall update to Mcafee personal firewall plus the computer kicked me out and rebooted. I contacted McAfee support and was - after numerous attempts - able to load their latest DAT file on the system and run a DOS scan which took 55 minutes. It found at least one trojan (the Multidropper .F trojan). I thought this would solve the problem. No. Went into SAFE MODE and was able to remove Personal Firewall. Rebooted the sytem. Bam! Once my desktop loaded, the computer rebooted again. McAfee's Security Center is still on my system, but the firewall has been uninstalled. The Computer is still rebooting continuously. Even SAFE mode takes forever to boot up. Before I take the computer into the local PC shop what can I do
View 1 Replies View RelatedFirst I see the two startup screens, then the windows logo screen, then a flash of a blue screen for an instant and back to the startup screen again. Over and over. I tried to repair xp using the method suggested in information week (Langa Letters)
View 4 Replies View RelatedAlright I have a problem. I removed a bunch of spyware from this computer which included Aurora, WinFixer, Surf Side Kick, and many others. What happened was after rebooting into WindowsI was prompted to re-activate Windows even though I hadn't changed out any hardware. I thought this was rather strange. I went ahead and did an overlay of the operating system. Upon doing the overlay I was prompted to activate Windows, so I did. Upon getting into Windows I found out another culprit which was giving me problems, it was a directory within Program Files. I went into safe mode and deleted the directory. After that I restarted Windows and it kept rebooting after the Windows splash screen.
View 1 Replies View Relatedxp pro, abit kd7, xp2400 2gb pc2700, 80gb maxtor, nvidia fx 5700. had an error on boot : windows rootsystem32
toskrnl.ex missing or corrupt replace file.found the fix for that restarted computer started to boot showed bargraph screen then went to restart and repeated.tried fixboot no change tried chkdsk no change. but got to 25% and said 1 or more unrecoverable errors.will not boot into safemode. can i get to restore to an earlier date through recovery console?
Had to replace motherboard in a PC and now I'm caught in a reboot loop. I keep getting the advanced boot option menuw where your asked wheather you want to Safe Boot, Safe Boot with Networking, etc. Which every choice I pick, the system reboots and takes back to the same place.what to use or if the Recovery Console will solve my problem.
View 3 Replies View RelatedI am running windows 2k pro and I just recently did an online renewal for Mcafee anti virus. After I finished the online renewal and the upgrade was downloaded I was prompted to restart my computer. I did. Now my computer is in a continuous reboot loop. There is a screen that flashes an error message " physical memory dump" during the continuous reboot. I no longer have my windows 2k pro disk to do a restore
View 9 Replies View RelatedMy computer has 1meg memory (2 x 510mg ) with two extra slots for expansion , I have been trying to add another 510mg memory but when I boot up the computer It shows system at 510mg total memory, does this mean my computer cannot be upgraded to 1.5mg ? and if so why is there extra expansion slots ?
View 4 Replies View RelatedI just upgraded to x64 version from 32 bit XP. But to my disappointment, the display properties only show up to 32 bit. Where is the 64 bit option? Here is the hardware I have: I had thought that while playing games, wherever there would be unmixed colors, they would now be mixed properly, like steam coming in dark areas in a game, or too many colors not fading into each other properly. But looks like I would need to do with the 32 bit only I guess.
View 4 Replies View RelatedMy keyboard won't type. I have to hold the letter down until my tower clicks twice then the letter types. I thought it was keyboard, got new one, still not working
View 7 Replies View RelatedI want upgrade memory (existing is 128MB) in PIII 866MHz, to 256MB or more,
to install Windows XP.Can I add 256MB module, so total will be 384MB(128+256)? Or I need use 256MB module only? Or 2 x 256=512MB?
Ever since I loaded MS-IE-8, I have found that '2' copies of IE open in Task Manager... I run a DELL-D800 (yes 7yrs old) w/ XP-sp3 and 1Gig RAM. With IE open twice - it is using upto .8Gig of RAM (not acceptable). Today (2010/04/02)I tried Google Chrome instead of IE - the first time it opened with only one copy in TskMgr - the second time it too now has 2 copies open... It went from blazing fast to as slow or slower than IE... And all the problems with IE are now returning with Chrome... What is causing this? Virus? Bug? Normal process?
View 8 Replies View RelatedOccasionally when I start up, The Icon in the system tray for McAfee turns to black and says firewall disabled. I have run a full virus scan, Spybot, Adaware and Spy doctor. nothing has been found that would suggest a problem. Any ideas as to why? It's not every time and only at start up. I am running XP Home, McAfee version 5. Once running no problems.
View 8 Replies View RelatedPlease help top two rows of keyboard keep typing 'o's instead of correct letter and then scrolling 'o's across screen endlessly.
View 10 Replies View Relatedhi folks,having a problem with a continous pop up error wuauclt.exe has encountered a problem and needs to close .we are sorry for the inconvenience. i then send the error report to microsoft and this stillcomes up.any hellp would be appreicated ihave a dell dimeson 2400 and running xp home edition 2002 service pack 3
View 8 Replies View RelatedMy computer does not boot up. Whenever I push the on button, it does not boot. Nothing appears on the screen, all I get is a continuous beeping.
View 3 Replies View RelatedI've been having a lot of problem recently with my computer issuing stop errors (didn't manage to write down the error code) and also crashing pretty much every program I use after awhile. The stop error I have just received was informing me about some newly installed hardware but i haven't installed anything new on the computer for about 2 years.
Even all 3 of my internet browsers are crashing a lot on a daily basis and I'm starting to get frustrated about what the problem actually is.I've run spybot, avg and antimalware both in normal boot and in safe mode and all have found nothing.Also I can only log in to windows if I boot in last configuration that worked otherwise it gets to the account log in screen and it's just a black screen with nothing visible at all.
I recently purchased a Toshiba Satellite Notebook- much to my checkbook's dismay -operating Windows XP complete with the lovely Service Pack 2. I've had the laptop for three months or so, and in the past two I've been experiencing some disturbing problems. The reason for purchase of this new laptop, in fact, was a system failure of my old desktop caused by the problems I'm witnessing now. I'll try to be as specific as I can, though it's hard when these problems are as vague as Microsoft Support. I've been experiencing repeated restarts, shut downs, and freezes- all random and bothersome. No specific events seem to trigger these nuisances; in fact, I'm typing in Word with the safety of Auto Save as we speak in fear of a restart. I've scanned with two anti virus programs (Norton, then Titanium Panda after the Norton trial ran out) and Spy Sweeper, and have found no problems. I have 66% of my disc space free, as well as close to 1 GB of RAM. I also defragment and clean often- I like a tidy computer- but to no avail. I also turned off Automatic Restart, which had no effect on the problems- including restarts.
I'm also having issues with Outlook Express and Internet Explorer hangups, but I switched to Mozilla Firefox and Thunderbird, so I'm not so concerned with that. Windows Media Player seems to be having freezing issues as well, but not as frequently as these restarts and shutdowns.All in all, I'm stuck. I'm savvy in HTML and general computer lingo, but not enough to decode (or find..) my error logs and figure out what in the world is wrong. I'm not using hardware enforced DEP, so the issue with that and SP2 is moot, as well as the mpegport issue. Aside from buying a Mac ( :P ), does anyone have any ideas of what I can do? If you need logs or screenshots, I can provide.
I am running windows xp - sp2. For the last few days, I was getting continuous blue screens whenever I booted up my laptop with the following message:ar5211.sys tried to write to read-only memory space.
View 5 Replies View RelatedI have Window XP. After deleting a lot of junk applications from add remove my computer started this trouble. It shuts down and on starts gives a blue screen which cannot be read as page doesnot pause. Computer starts two times and runs diskchk.It only stays third time but shuts down again occasionally. After third time it gives error thatcomputer has experienced serious error
View 7 Replies View RelatedI complete each step just fine up to the point after the repair finishes and computer restarts, then goes to the blue windows xp setup screen (the screen that has the header "an exciting new look") with the text "setup is being restarted." this screen is shown for about 10 seconds, then the computer shuts down, restarts and repeats this "setup is being restarted."
View 6 Replies View RelatedUpon turning on my PC, the I get as far as the Windows icon showing the system booting up, then an hour glass, then back to a black screen as the computer automatically reboots and begins the cycle again. I've done some research online and found others have worked on this problem with check disk commands and safe mode start ups. The problem is, even when started in safe mode, it reboots. I am not able to get to a command prompt at this point to try anything!
The machine is an HP pavillion 513n running windows XP. XP came installed when this desktop was purchased new 2 years ago. This particular computer is not even used to access the internet so I have a hard time believing its virus related. I've checked that the power supply is secure and the fan seems to be operating as usual. The only change I made to any software or systems today was to add several legitimate fonts to the control panel.
I went to play Half-Life 2 last night, just as I do any other time. It informed me that there was an upgrade for my ATI Radeon 9550 video card and wouldn't let me proceed without it. Really wanting to play, I went and installed the update. After rebooting after the update, I noticed something. Some applications (i.e. Skype, MSN, etc.) weren't working properly. Then, I started getting random shutdowns.
I was able to boot into Safe Mode and do a System Restore back to before I installed the new driver. This did not solve the problem. So I called ATI, and they instructed me to uninstall the ATI Drivers and reinstall it without Catalyst. So I did, and it worked... For about an hour. My computer then rebooted and now refuses to boot, safe mode, debug mode, normal or otherwise.
I had left my computer on logged in on Windows 7 and when i got back the computer was in a continuous boot sequence (starts to boot, then after about 4 seconds shuts down and then over and over again). I reset the power from the back and turned it back on and it started up but with a different boot screen (Dynamic Energy Saver Quad6 Screen lol) and not the "black" one that normally comes up. It happened again last night and I think it happens when I leave my computer logged on in Windows 7. The weird thing was that after I reset the power from the socket (which stopped the loop) and turned it back on, it had me still logged on as a user and everything was like it was before I had left (basically like hibernate, except that hibernate is disabled on my computer
View 1 Replies View RelatedI have currently WinXP running on my pc and my event manager is getting constantly full up of DCOM messages which I am scratching my head over! The message I am getting is:DCOM is unable to communicate with computer ANNE-MARIE using any of the configured protocols. I am getting 15 of these every minute ANNE-MARIE is a notebook of someone who worked here shortly and used my companies wireless connection. It is driving me nuts and I would be very grateful if someone could assist me with this.
View 2 Replies View RelatedMy ACER Aspire pc won't boot past the Windows Logo. I tried to boot in safe mode but had the same problem. I am running XP home addition. It just keeps going round in circles, I get the Acer logo, then Windows and keeps repeating itself. I tried all the f8 options ie safe mode and starting from last known config but to no avail.
View 2 Replies View Relatedmy PC, after the xp logo, it hangs, i have to restart about 3 times to fix it, i have ran anti virus, and spyware scan, i think its a software/driver issue, any ideas how i can figure out what it is?
View 2 Replies View RelatedWhen I try normal boot, windows hangs up on XP logo screen. The hdd indicator tells me there is no more hdd access.When using save mode, windows starts until black screen with note "save mode" in the edges appears, then hangs up, also no more hdd access.Booting with options "last known working config" and other options does not work, too. (always the same result - hang up with no more hdd action).In my last working session i did not change any config, installed programs or so. Just using office package, acrobat, photoshop, icq and skype.Shutdown without any problems.
View 8 Replies View Related