I have a laptop (IBM Thinkvantage Thinkpad) and when i boot it does the following:Shows motherboard graphic Goes to "Starting windows." with a loading bar under it.Stops and says "Windows could not start because the following file is missing or corrupt:WINNTSYSTEM32CONFIG SYSTEMced" Now i know that that means the hive file is too big and i know how to fix it But I don't have a Win2k boot disk and i don't have any floppy drives installed I had an idea to try and do a network boot through the BIOS setup which it does allow but i don't really have any server programs to "host" a network boot with my Windows XP desktop.
I have an older Compaq I have ignored for over a year. When I turn it on it acts like it is always in run mode, no disc in it. I used an old floppy to re-boot to no success, I downloaded an ME Boot file of net and loaded it onto my 512mb stick and slid into the usb port also with no success. My intention is to boot the PC up enough to retrieve some data and then do an FBI wipe on the hard drive and start it like new. can i get this up and running without wiping everything first?
I am trying to get a machine up and running for a friend. It is one he bought off of someone up north and he doesn't know the admin password to be able to use it. I originally was going to use some software I found in the forums that requires me to boot from a floppy or a cd. I checked the BIOS and have it booting from the hard disk last and yet I cannot boot from either the cd or the floppy.At this point I am willing to Fdisk the whole thing and start fresh. It shouldn't really matter since he has never been on the machine before and can't have any data that he would care about.
I am trying to install a dual boot system on XP but I am unable to boot from the floppy dirve with a Windows ME bootable disk. The A drive is the first thing in the bios and it is set for 3.5, 1.44mb size disk. At the very bottom of the bootup screen, it shows "Floppy Disk Fail (40). The floppy drive works ok whenever XP is up and running in that I can put a floppy in the drive and open it and view the files, copy the files and most anything I need to do. I have read everything I can find on that error but since the drive seems to work ok other than for boot up, it has me stumped.
I keep noticing that my floppy drive would activate when I'd go to log onto the computer or turn it off. I disabled the A drive and since then things are kind of going the way it was when I first bought this computer. I did manage to check the areas that were mentioned before. I found nothing that came close to what was mentioned to look for.Did I manage to contain this thing in the floppy? I still want it off of my computer.
my hard drive will simply not boot. i am having a problem with NTLDR is missing. i have tried at least 4 different methods of fixing it. it will not boot from a floppy drive or cd. the hard drive is about a year old. i think the problem started after i used a cleaning program called PC-decrapifier.. thinking it would speed up my computer.. i would like to fix this problem asap and the hard drive isn't bad, because i can connect it to my other computer as a slave and access my files, but i still can not boot it even in another computer.
after removing and reformating HD,I put HD back in my Compaq Evo D500 and it won't get past the initial recognization of the floppy drive.The floppy indicator light remains ON,and I can't seem to go beyond Strike F1 any ideas on what went wrong?I checked the connections and the memory sticks to see they were all seated right,but it doesn't count up the memory in the upper left corner at this point I'm lost!
Just got a new computer with Gigabyte GA-K8SNC-939 Motherboard. The problem is that on each boot , and shutdown, the floppy drive is accessed (i.e. motor runs ).The floppy drive is NOT selected as a boot option in the bios and the access on boot comes just after the 'Loading Personal Settings" screen. On shutdown it is just before the end , not immediately on shutdown.I seem to remember there was a Floppy Seek setting somewhere in Windows at one time, but I can't seem to find it in XP SP 2. As it happens well into the boot cycle, I don't think it's related to the motherboard.
I had had 2 operating system on 2 hard drives (XP and Vista) I took vista off and replaced it with media center. I could boot both xp and media center but the vista boot screen always shows up and would have to go into "ealier versions of windows" and choose my OS from there. I read somewhere to get rid of the vista boot screen I should delete "bootmgr" file and "boot" folder from the root of C: I did this and now nothing works. It tries to boot into vista boot screen but it says files are missing and resets
When i booted up my pc to put some coursework on a usb stick, it failed to boot to xp. It went to the "xp was not shutdown properly,boot to safe mode, or last known working settings screen, ETC". None of the options work, i have tried all of them, safe mode and last known working settings included. When i select one of the options, the hardrive spins up, and then my gfx card bios info and mobo splash screen come on. Well, i think it might be because i ran a 'virus remover' for the game gmod, this was the first time the computer had been booted since i ran it.
error began appearing on my computer yesterday (running XP Home, 2nd SP). When I'm booting up cold or not I get a screen which says "Floppy Disk fail 40" and then it allows me to continue by pressing the F1 key.
I am unable to boot my PC most of the times.Whenever I switch on my PC,I see the following message nine ot of ten times. DiskError/Boot Faliure Reboot and select proper boot device or insert Boot media in selected boot device If I press enter after this messages & keep pressing following messages appear from time to time (Not simultaneously). If just after making the switch on, I press F2 key to check the boot device preference
If just after making the switch on , I press f11 key to reach the boot menu I always find the 1.44 MB Floppy option highlighted as the booting choice.(though there had not been any floppy in the floppy drive, I dont have any really)I make the hard disk option highlighted & it solves the problem only a few times. But next time when I try F11 key to check the boot menu again I find 1.44 MB floppy highlighted.
I haven't installed anything new on my computer but today after having my computer shipped to me via UPS I cut on my computer and where the XP load bar screen was I got: "reboot and select proper boot device or insert boot media in selected boot device".Seeing this I knew I went into the BIOS setup and tried to turn the system priority to look at the HDD. Instead I only had the option of the DVD drive and the CD drive.I have no idea how to solve this problem and don't have any of the recovery CD's. I DO NOT WANT TO REFORMAT because like a bad little boy I did not backup my 4 years worth of work.
first i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
I Installed a 2nd HD and cloned my first HD to it as a backup and would like to be able to dual boot. This is XP Pro. I would like to know what numbers to use in multi, disk, and rdisk.
I have a Windows XP Professional Edition and i incurred a spyware virus on my PC, so i made a dumb decision by running MSCONFIG and changing my SAFEBOOT option, I did this because previously I couldn't even get into Safe Mode, it would load the files on the screen.
I accidentally deleted a partition and later found out that my system is dead....The only way I recover out of that is I reinstall Windows and then install grub again to recover the Linux partition. But I feel the delete partition is a very rapid process just taking seconds and in that I don't think files would be deleted, so I feel potentially I can recover the deleted partitions including the boot partition. But I don't know how to do it. Also now when the boot partition is deleted and the system is not booting up what should be done to recover the system and data?
Recently I was playing a game when my computer froze up, when I restarted it, it froze every time on the Windows XP bootscreen. It boots fine in Safe mode with networking. (I'm typing this post on this computer)
I have a dual boot system (2 hard drives) booting Suse and XP and boot up through Suse's built in boot manager which gives me the option of booting to Windows or Linux. But since I barely ever use Linux I want to delete it off the 2nd drive so I can use it for a storage drive, so I'm wondering how to replace the Windows Master Boot Record so I can just boot into my XP drive. I'm scared that once I delete/reformat the contents of the 2nd hard drive (I'll probably use Partition Magic to do this through my XP drive) that I won't be able to boot XP up anymore. So before I do anything I want to just be able to boot into XP and bypass the linux drive before I delete it to make sure everything is ok.
I"m running WinXP SP2 Home. Hardware is 2.0 Celeron, 1 gig Ram, 64MB Nvidia Video Card, PS/2 keyboard and mouse, HD's are 250GIG Western Digital with 4 partitions and 27% free on the XP Boot and 200GIG Western Digital with 2 Partitions. I have a Lite-On DVD +-R/RW drive and a 3.5 floppy. I am setup with a Duel-Boot configuration Win 98/XP. I do not have a paging file.
My problem occures after I hit enter for the Select Operating System page. I Hit enter, Win XP proceeds to load. After I hit enter and Windows loads the blue welcome screen 1 minute has passed. I hear the Welcome Audio music, however blue welcome screen is still there for 30 more seconds. Next is my picture that I have as my background that is shown without icons for 1minute 21seconds. Windows now displays my icons on my desktop. the icons blink at minute 4. after 4 minutes and 51 seconds I am able to use my computer. At bootup I only have 43 programs running and 357MB of the 1 gig ram taken.
What I have done: 1) I have started in safe mode and defraged my PC, 0% frag on all partitions except a drive that isn't currently plugged in and it was 1% because it's my backup drive (not worried about that 1%) 2)Removing all connected Componets and rebooted, same problem. 3) I have tried using msconfig.exe and setting the startup selection as Normal- it's defaulted to Selective. Tried reducing my startup programs. ....
On boot sequence, PC hangs on Windows boot screen - with the good old progress bar churning along for eternity. It just stays there. It is possible to boot into safe mode, safe mode with networking, etc. but never boots up normally. 'Last Known Good..." does not help at all.
I have tried 'repairing' XP using the recovery console (deleting the boot.ini file, then BOOTCFG /REBUILD and then FIXBOOT) to no avail. Do not know where in the boot process it is getting hung up and not totally sure how to determine that.Using Windows XP Media Center Edition with SP2. Plenty of RAM and disk space.
Had this problem once in the past and it seemed to self correct after about 50 reboots.
Does this sound like a re-install of XP is required or are there any other options that might work?
when I edited my boot menu I left off the NoExcute=OptIn at the end of the boot menu line to load my system and was wondering if I can add this now without messing everything up ? I just found out what this option does and looks to me like a have to option. This is on XP Pro.
i have ONE hard drive with partitions. I had a really bad setup first, I had 1 partition with 3 windows installs on it, folders like WINDOWS, WINPRO, WINN, I never took the time to delete them or whatever, and I was using winpro as my main OS. When I was running the above setup, when I boot up it would ask me: Select what OS to load Windows Pro, Windows Home, Windows Home
I decieded to install Windows 7 Ultimate 64 bit, worked flawlessy, but I wanted to go back to windows xp pro 64 bit. So I made a new partition and installed windows XP pro 64 bit onto it. when I tried installing windows xp with my CD, the first part would work fine, but then when it restarted to continue the setup, it would load my MOBO logo and then after, it would just show a blinking underscore "_" on the top left corner, and nothing else.
I managed to install a fresh windows xp from my USB flash drive, but when booting up normally it still does not let me select what OS to log on to, it just shows the blinking underscore in the top left after the MOBO logo passes, I actually have to boot by USB drive to boot this fresh install of windows. I think something is wrong with my boot loader, but have no idea how to fix it.
hey anyone remember that boot disc that had everything and it also had a mouse function in it? it was like boot magic or something i cant really remember. I only remember it had 2 versions one was the floppy which was free and the other you had to pay for the cd version
I have a HP ze5568cl laptop (Windows XP SP2). For a few years we've had trouble with the power connector. We've just wiggled the power cable to keep it connected and lived with the problem. It also gets very hot and the fan runs constantly. Yesterday when I powered it on there was no power, absolutely nothing. My husband has some electronic knowledge so we took the laptop apart and he soldered the loose part of the power connector. While he was doing that I cleaned the fan (couldn't believe how much dust was in there.When we plugged in the power cable the orange light came on so we were excited. When we powered it on all the keyboard lights lit up so we thought we had fixed the problem but.that's all it did. It went no further except that the fan kicked on.There is a clicking noise coming from the cd drive about every second with the green light flashing. I suppose it is checking to see if there is a bootable cd in the cd drive. I have attempted to change the boot order by holding F1, then F2 but it still continues to try to read the cd drive. I can't get to the screen that will allow me to change the boot order.
I also put the OS disk in the cd drive, hoping that it would start with the disk but it just clicks. Hubby removed the cover of the cd drive and I could see that the cd is spinning.There were no problems with this laptop prior to the power problem. It was really working very well especially considering the age of it. The information in my sig is not for the computer with the problem. It's actually for an old computer which my son now has at college.
During System startup, the system always halts at "Strike F1 to retry boot, F2 for setup utility". The only way I can manage to boot to Windows is by selecting "Boot to utility partition" from the Boot Device Menu or if there is a Windows XP installation CD in the cd-rom drive. When I boot this way, everything works fine .This behavior started when I performed a fresh install of XP Professional (XP Home came with the system). The problem did not start immediately after the installation; I was able to install some drivers and reboot a couple times (maybe twice) before it happened. When I installed the display driver (from Dell) and rebooted, it went to the "Strike F1. " screen. I have since tried another fresh installation of XP Home (the original OS) and the problem is still occuring. This time it occurs immediately after the installation; No drivers have been installed at this point.
I cloned a hard drive which had Windows XP on it (the hard drive was going out) and the new hard drive would not boot unless I booted first to a floippy with boot.ini, ntldr, and ntdetect.com. Have tried recovery console and everything else I can think of, but the system WILL NOT boot to the hard drive. I checked the boot.ini file for improper boot, but everything looks The old hard drive had two partitions on it, but the hidden partition was corrupt so I deleted it. I changed the boot.ini file settings accordingly.
When I boot WinXP it goes to the screen that asks you to select which use to log in as. I am the only user on my PC. Is there a way to get rid of that so Windows will just boot up automatically?
I bought a computer for my wife and kids. Well months go by and my wife tries to install something and notices that the MAIN drive is H: not C:
I figured that it was weird but no big deal. Well I purchased a printer for her and while trying to install the software it was giving me a "Windows - No Disk in Drive" error.
I did some research and spoke to HP tech support and they suggested that I search the web for a way to change the drive letters from H: (current hard drive) to C: (supposed to be default drive)
