i have a dell inspiron 1300 laptop with windows XP, i also have a desktop 2400 with windows XP. I did something real stupid the laptop did not come with a reinstallation disc. So i figured the windows XP disc i got with my desktop i could reformat my laptop. i was gravely mistaken it seams that now i can't get on the internet. because it's not recognizing that i have a wireless card in my laptop.
View 10 RepliesI just installed Windows XP Pro SP2 on my laptop and I think that it isn't recognizing my wireless card. Its in-built into the laptop, but I'm looking at my device manager and its not seeing a wireless adapter.I need to upgrade to a newer version of Windows.
View 1 Replies View RelatedI have recently reinstalled Windows XP - everything seems to be OK, except that my wireless modem is not recognised and I cannot connect to the internet.
View 1 Replies View RelatedI've installed two new disc drives, both Sony DRU 820A into my tower. XP doesn't recognize them.
View 12 Replies View RelatedThe wireless internet isn't working... I don't know what wireless card I have.. I should only have to install the driver, but I can't get online to download it.
View 10 Replies View RelatedI have aproblem with my XP machine.when i boot up the small wireless icon says its not connected,Also when i click to view available wireless networks that there are none in range, i reboot the pc and it might resolve it .More often than not it doesnt.Also i sometimes get a yellow exclamation mark over the wlan in device manager.I update the driver and it resolves until next time i boot back up the pc.Wireless switch is on. My 2 other pcs wrk perfect.
View 1 Replies View RelatedWhen I run system file checker it says: "Files that are required for Windows to run properly must be copied to the DLL Cache. Insert your Windows XP Home Edition CD-ROM now."when I click More Information it says either I have inserted the wrong CD or the CD-ROM drive isn't working. I have the CD in, it just doesn't seem to be recognizing it.
View 7 Replies View RelatedI just recently re-formatted my Dell Dimension 3000 at work. I didn't have the original system disks and just installed a vanilla copy of XP Home. For some reason it will not read the ethernet port, making it difficult for me to install any new programs, or the obvious (get on the internet).
View 3 Replies View RelatedI am trying to set up a home network. However after installing a Belkin F5D7000 Wireless Desktop Network Card I get the following error: PCI Simple Communications Controller Error.. Search For Drivers. I have the installation disk and I have tried manually pointing the Hardware Wizard to the file, but it will still not pick up the drivers. I have the latest drivers from Belkin - no joy.This is the second card I have tried and after installing into another computer it worked fine. However the machine I am trying to install onto is older. Pentium III 450 on a B7XAN Motherboard. O/S Windows xp pro.
View 3 Replies View RelatedFurther to my message of 03/03/10 I have a Samsung NC10 Netbook, it keeps returning to the reboot options black screen but whatever option I choose, it boots up, flashes Windows XP, flashes blue screen, ends up back on black options screen. There's no chance of getting on the internet to download anything, no icons no task bar. I know that this will cost us �70 to take to PCWorld and we're a bit low paid. How can I transfer the files to another PC?
View 14 Replies View Relatedrecently wiped Toshiba Satellite A25-S307 notebook and installed Windows XP Pro. Now we find that there are no drivers for the internet: no wireless card driver, no ethernet controller driver. Cannot even find out the names of some of the lost drivers! Here is the "Problem Devices" list: Base System Device Ethernet Controller Not Available (this is what it says in the list!)PCI Modem Video Controller
Here are some drivers we know we need but cannot find: realtek rtl8139/810x family fast ethernet NIC Trident Cyberblade XP2 AGP 4x The major issue is no internet connectivity means we cannot use one of the driver scanner software out there. Every utility I find requires me to be able to connect to the internet on the affected machine!
I have a Compaq EVO D51S SFF which I had plugged to my LCD TV as a media centre, just to watch movies and all. I had not connected this computer to the internet because I did not have a wireless card.I finally installed a wireless card, and then windows started doing all sorts of updates as expected (since the version on the SFF was SP2).Once windows was done with the updates, I started having problems with the screen resolution.
The SFF does not have a stand alone video card, so I had set the resolution at 1024 x 768, and this worked just fine before the updates.Now, the resolution keeps changing and this is a problem because the LCD TV gives me a message saying "Resolution Not Supported", so I can't use the computer unless I connect it to a regular computer monitor, select 1024x768, and then connect to the TV. I connect via VGA port, not DVI (don't have DVI).
Recently added a wireless card and put it on my home network. It ran fine for a couple of weeks, but now it is running painfully slow. Just booting the machine and getting the start menu to come up takes forever. Every application is painfully slow and I am unable to connect to my network.
View 11 Replies View Related2 year old 2650 Dell laptop running XP. Installed a Linksys wireless G card and then a couple wks later the machine won't reboot. When powering up I get the blue Dell screen with "F2 for setup" and then it goes to a dark silver/black screen with a pretty white cursor flashing upper left corner of the display. Besides that I get nothing. Power down/up/sideways and nothing, except the same Dell screen noted above and the same silvery black screen w.cursor.
I've removed the batt so only the power cord is feeding it. No dice. I did somehow manage to get to my desktop a few min ago after 2 wks of no attempts but as soon as I tried to launch IE it froze and I had to power down and now I'm back to square one. Have also tried F8 a hundred times, as well as dancing on my left big toe while chanting to the computer gods.
Here�s the problem I have been looking at a friends dell latitude d600 equipped with a 1450 Broadcom wireless mini pci card Driver for the card is up to date, the card is brand new, every time I shut down, then reboot I have to reinstall the driver again,�.the driver keeps getting dropped for some reason��..Xp pro sp2���.
View 6 Replies View RelatedWhenever i install drivers on my pc, (i've tried graphics card drivers and wireless network card drivers) my pc stops working. When i installed the graphics card drivers, i tried testing the graphics on a game (counter-strike) but as soon as i got into the game, the pc flashes a blue screen, and reboots. I cant see what the blue screen says because it flashes on and off again to quick for me to read it. I decided to uninstall the graphics card drivers, and the game worked perfectly, but the graphics were REALLY bad. So i thought i might need to update some other drivers, so i tried to install my wireless network card, but when i finished installing the drivers when i had to restart my computer, it flashed the BSOD.... AGAIN! I need help urgently as im going to a LAN gaming comp called "rezidue" and its on in 2 weeks, i need my pc fixed by then! All these problems started when i upgraded my CPU. Everything was running smooth, and i was happily playing along on my computer, when i was asked what my FPS was in counter-strike, and i was all "mine are 65!" and there like "wow that sucks, mines 130" so i set out on my epic quest to get better FPS then everyone else and MAN THAT WAS A MISTAKE. I upgraded from my celeron 2.8ghz cpu to a P4 3.0ghz HT cpu, and thats when things started messing up on me. My entire system is as follows (incase it can help someone help me) P4 3.0ghz HT CPU, Microstar P4 motherboard, 128mb Nvidia Geforce mx4000 AGP x8 graphics card, 256MB ddr ram (recently brought new 1GB ddr ram off ebay just for rezidue! should be here soon!) TP-LINK 54mbps wireless network card) And last but not least
View 13 Replies View RelatedMy problem is : When I called Verizon yesterday, I was told that to connect the printer to the router, I do not need the print server. I was asked to locate the ethernet port at the back of my printer, plug the ethernet port cable and connect it to the Verizon router. Unfortunately, my printer does not have an ethernet port. I was told to call HP,and I did but did not get much help.What should I do to get my wireless printer work? I have a PC and a laptop. Prior to Verizon, I have a DSL and Vonage, both routers and print server did not have the same problem.
View 1 Replies View RelatedI took my daughters Gateway M320 laptop and did a restore from the CDs that came with the laptop. After doing all the Microsoft Updates, ALL the wireless driver installs from Gateway there is no 'Wireless Network Connection' icon. I have also checked Device Manager and there is no wireless adapter. Before this exercise she was running wireless fine. It does work 'hard wired' but no wireless icon.
View 16 Replies View Relatedi have a labtec web cam with software but i have a dell mini and have no where to insert the disc, please help
View 1 Replies View RelatedI'm running XP Home on a Sony VAIO. The PC has a partitioned HD: C (main), & D (storage). I defrag every night.
This evening, I got the dreaded "not enough disc space to complete disc defragmenter" message. Suddenly tonight I'm showing only 2% free space on drive C. I went in and changed my System Restore percentage from 12% to 6%. Now I'm showing 6% free space (but still can't defrag).
I shouldn't have had to change my System Restore percentage tho. I'm sure that's not the culprit. Up until last night the C drive was nowhere near this full. Something's there tonight that wasn't yesterday. ...A whole LOT of something. The Defrag graph is showing a nearly FULL C drive with a LOT of red "fragmented" files"
I've been doing a bit of downloading, but after it's on the desktop (part of C), I move it to the D storage drive (which has a LOT of free space remaining).
Something's fishy. I'm no expert, but I'm thinking I need to find some type of application to tell me what's suddenly on that drive taking up all this space. Anyone have any helpful suggestions?
neither wmp 11 or roxio recognizes a blank disc. when i try to burn a disc (dvd or cd) both wmp 11 and roxio tells me to insert a blank disc. i have tried putting a disc in first, or wait for the program to tell me to insert disc but neither way works!:
View 9 Replies View RelatedMy packard bell notebook model (easynote) E-3242 running windows XP. After installing SP2, XP wont load, even in safe mode. I already used cd-bootable Knoppix to copy all documents i needed to rescue. At this point a complete Re-install would be great, but alas, no install disk came with this notebook, And i lost the recovery discs i made. I do NOT have any XP disc available.How can I begin a re-install or similiar from the Hardisk with no Discs?
View 5 Replies View RelatedI get a little confused by terms like restore vs recovery, which are often interchanged incorrectly IMO -and then there are the terms bootable disc and startup disc, which can also get confusing - and I have seen other terms used also.
please explain exactly what you mean by the "bootable XP CD". I have a new XPsp2 home edition pc, and I had a millennium before that (which I made a "startup disc" for in add/remove programs - so I guess a startup disc is yet another term for boot disc - it was only a 3-1/2" diskette (less than a meg), and it would get my millennium to boot by typing "scanreg /restore" at a prompt that you eventually came to.
For my XP, I immediately made a Compaq "recovery dvd" (it took 2-dvd's) utilizing the "Compaq recovery cd-dvd creator" in start/programs/pc tools. This dvd (can also use cd's but it takes 8 or 9 cd's I believe) contains everything that is on the pc (from the factory), and which is also in the system recovery partition D:. There is also something called a "Recovery Tools CD", which I did not burn, since it did not seem necessary, after
reading about it in the "troubleshooting and system recovery guide" that came with my Compaq. I will burn that one to, if you can explain what it will do, that I can't ultimately achieve by using the "recovery dvd". The manual said that one of the things the "recovery tools cd" did was to remove the system recovery partition (drive D), so you could use it - but I'm sure there is another way of doing that from within the pc once you got it running using the recovery dvd - am I right - I've never messed around with partitioning, since I have no need to.
My new XP did not come with any "bootable CD" per se, and I made the "recovery dvd", as stated above. So please shed some light on what the "bootable XP CD" is that you refer to (because you said that a "restore Cd is really overkill" - I assume you mean the "recovery CD" that I mentioned). Also please provide your comments on the "recovery tools CD", and any other comments you have on the various terminologies I have mentioned above.
We have two laptops and one wireless (HP Photosmart C7280) printer. Our laptops both connect to the internet wirelessly through a router. I was able to install and can print wirelessly from my laptop (a Mac) with no problems. However, we cannot figure out how to print wirelessly from my boyfriend's laptop (a Dell). We have installed the printer software and the printer itself on his laptop, and the laptop is able to identify the wireless printer over the network. We made sure that the printer is set to "online" and that file/printer sharing is turned on. But, whenever we go to print any kind of a file, we get an error message simply stating that the printer was unable to print and that we should run the troubleshooter. So, we run the troubleshooter, and we get this message:"The troubleshooter was not able to ping (detect a connection with) your print server. This might be the cause of the problem. Verify that your network is configured correctly and that you are connected to the network."
I am more used to working with Macs and my boyfriend is computer illiterate, so we're a bit lost as to what this means. I was able to set up a wireless network connection on his laptop, but beyond that I'm not sure what else to do. Most of the other advice I've seen online involves a wireless printer that is wired to one computer, and another laptop trying to wirelessly access that printer through the connected computer...if that makes any sense. Our printer isn't wired to anything, and we just can't figure out why it'll print wirelessly on the Mac but not on the Dell laptop. Any ideas?
Does anyone happen to know how to successfully create a network in Windows XP Pro for a wireless laptop and for an Ethernet-hooked-up (non-wireless) computer. I'm trying to printer and file share the two together BUT I've exhausted myself in trying to make it happen. Has anyone successfully done this? Am I missing something? Perhaps hardware?I would truly appreciate any help or advice.
View 14 Replies View RelatedIf i log onto my computer and just go into network connections, the computer is not able to look for wireless networks. if i hit the button to find networks, it gives me some strange error message. i have noticed though that i can fix the problem if i manually go into services and start the wireless zero configuration service myself. i configured this service to start automatically, and to keep restarting if attempts to start fail, but for whatever reason, the service does not start on its own when i boot the computer. once i start the service, i am able to connect without any problems.
The error message i get says something about finding more than one wirless device. i have a belkin usb wireless card, and before i installed the one i have now, i had another that coincidentally was the same size and also made by belkin. thinking that maybe some software was still on the computer, causing it to find both, and consequently not being able to connect to either, i uninstalled all the software for both routers and deleted all the related program files off of the computer. then i reinstalled and...got the same exact problem.
Firstly I have a pc which I installed Win XP Prof onto. All worked great. Then took out modem card and replaced with ethernet card. Again no problem. However, when I went to boot the compute up a week or so later it went through the boot process and then just before I would expect to see the Windows logo with blue sky background appear I "sometimes" get a blue screen flash up with a message which you cant read unless you can slow down time and then the PC restarts and goes through the whole procedure again.
I did manage to start in Boot logging mode and watch to see where the problem was. It seemed to be something to do with the Display adaptor. I found the appropriate solution on the web and although I now get further on into the boot, it still restarts. When i try to run the logging thing (!) it does not want to play any more and just boots in the normal fashion. I have tried defaulting the BIOS, checking the file system for damaged sectors etc all to no avail.
I have a PC with a built-in media card reader, and when I use the compact flash portion of that reader a certain program is always launched. I would imagine that initially I indicated which program to open. Is there any change to change that program?
View 3 Replies View RelatedIm not very computer smart...but i have AMD Athlon 64 processor 4000 NVIDIA GeForce 6150 LE Graphics My guess is i have a good processor and a horrible graphics card...the games i play such as call of duty4 and ship sim 08 realy glitch on my computer so i was thinkin of getting this card called GeForce 8800 GT super+ 1GB video card...is this what i should get..??it costs aobut 200$
View 1 Replies View RelatedAfter putting the windows XP CD in and rebooting, now whenever the computer is restarted I get the blue screen that says unable to find disc press F3 to exit setup. How do I stop this so computer will reboot normally?
View 6 Replies View RelatedWindows XP Home Edition (sp 2) HP Pavillion After I start the computer, I get this message---Red circle with a white x message states There is no disc in the drive. Please insert a disc into drive. This started this morning. Didn't have it last night when I shut it down. Have no idea why this all of a sudden started. Any help would be appreciated. I have tried clicking on cancel
comes right back. Went into Task Manager and clicked End Task.